SENACC-250 [ETC]
Acceleration Sensor - SENACC; 加速度传感器 - SENACC
| 型号： | SENACC-250 |
| 厂家： | 
ETC |
| 描述： | Acceleration Sensor - SENACC |
| 文件： | 总3页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Data Sheet
Acceleration Sensor - SENACC
·
Single axis acceleration measurements (low-
frequency vibrations and movements).
Wide acceleration range.
·
·
·
·
Excellent EMI/RFI immunity.
Rugged epoxy-filled enclosure, small size.
Watertight mini sure-seal® connector.
The SENACC measures vibrations up to 150Hz
with a recorder that is setup accordingly. It may
also measures longitudinal, lateral or vertical
acceleration of the body or the moving parts of a
vehicle.
·
·
Do not expose wire/connector to water, oil or
fuel.
When its sensing axis is oriented to gravity the
SENACC experiences an acceleration of +1.0 g.
Route the sensor cable away from sources of
interference, such as ignition coils, plug leads,
electronic modules or antennas.
Verify that the cable is not pinched or
stretched by moving parts.
·
·
Available ranges:
·
Do not bend cable with curvature radius
smaller than 1.60² [40 mm].
Sensor
Range
± 1.0G
± 3.3G
± 5.0G
± 10.0G
± 25.0G
± 50.0G
SENACC-010
SENACC-030
SENACC-050
SENACC-011
SENACC-250
SENACC-051
·
·
·
·
Operating temperature: -40°C to 85°C.
Power supply: 5 mA, 11-24Vdc.
Dimensions: 33mm x 38mm.
Weight: 56 grams (1.975 oz.)
·
·
·
·
Align the sensor‘s sensitivity axis with the
measuring direction.
Use the #4-40 screw-holes to fasten the sensor
rigidly to the moving body.
Connect the sensor to an analog input of the
system: A, B or C.
Carefully align indexing rib when mating mini
sure-seal® connectors.
SENACCTDS/E - ISSUE 4 – October 2004
PAGE 1 of 3
Technical Data Sheet
Acceleration Sensor - SENACC
Refer to the nameplate on each sensor for
individual calibration parameters.
Name
Predefined
Equation
Units
SENACC-010
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
Name
Predefined
Equation
Units
SENACC-030
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
Name
Predefined
Equation
Units
SENACC-050
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
Name
Predefined
Equation
Units
SENACC-011
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
Name
Predefined
Equation
Units
SENACC-250
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
Name
Predefined
Equation
Units
SENACC-051
Acceleration
g or m/s2
See
nameplate
See
nameplate
P1
P2
SENACCTDS/E - ISSUE 4 – October 2004
PAGE 2 of 3
Technical Data Sheet
Acceleration Sensor - SENACC
Black anodized
aluminum enclosure
(+) sensitivity axis
MIL-C-27500
shielded cable
#4-40 THRU hole 2 PL
Water tight mini
sure-seal® connector
All dimensions are in inches [millimeters].
SENACCTDS/E - ISSUE 4 – October 2004
PAGE 3 of 3
相关型号：
SEOB-S
Rectifier Diode, 1 Phase, 1 Element, 1.5A, 100V V(RRM), Silicon, DO-214AC, SMAJ, 2 PIN
GOOD-ARK
©2020 ICPDF网 联系我们和版权申明