SS5GL [ETC]
MIKROSCHALTER LOETANSCHLUSS FLACHHEBEL ; MIKROSCHALTER LOETANSCHLUSS FLACHHEBEL
| 型号： | SS5GL |
| 厂家： | 
ETC |
| 描述： | MIKROSCHALTER LOETANSCHLUSS FLACHHEBEL
|
| 文件： | 总6页 (文件大小：155K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Back
Subminiature Basic Switch
SS
Economical, Subminiature Basic Switch
Offers Long Life (30 x 106 Operations)
Incorporating simple and stable two split springs
which ensures a long service life (30,000,000
operations).
A
variety of models with low operating force to high
operating force are available.
Solder, quick-connect (#110) and PCB terminals
are available.
Models with a switching current of 10.1 A
incorporate special contacts made of silver alloy
that are tough and highly conductive.
221
RC S+E
Ordering Information
Consult OMRON for standard approvals of models.
Rating
Actuator
OF
max.
Soldering terminal
Quick-connect
terminal (#110)
PCB terminal
SS-01-ED
0.1 A (bifurcated Pin plunger
crossbar
contacts for
microvoltage/cur
rent load)
25 g
SS-01-E
SS-01-ET
50 g
150 g
8 g
SS-01-F
SS-01-FT
SS-01-FD
SS-01
SS-01-T
SS-01D
Hinge lever
SS-01GL-E
SS-01GL-ET
SS-01GL-FT
SS-01GLT
SS-01GL-ED
16 g
50 g
8 g
SS-01GL-F
SS-01GL-FD
SS-01GL
SS-01GLD
Simulated hinge lever
Hinge roller lever
SS-01GL13-E
SS-01GL13-F
SS-01GL13
SS-01GL2-E
SS-01GL2-F
SS-01GL2
SS-01GL13-ET
SS-01GL13-FT
SS-01GL13T
SS-01GL2-ET
SS-01GL2-FT
SS-01GL2T
SS-5-FT
SS-01GL13-ED
SS-01GK13-FD
SS-01GL13D
SS-01GL2-ED
SS-01GL2-FD
SS-01GL2D
16 g
50 g
8 g
16 g
50 g
50 g
150 g
16 g
50 g
16 g
5 A (standard
rivet contact)
Pin plunger
SS-5-F (see note)
SS-5 (see note)
SS-5GL-F (see note)
SS-5GL (see note)
SS-5-FD (see note)
SS-5D (see note)
SS-5GL-FD (see note)
SS-5GLD (see note)
SS-5T
Hinge lever
SS-5GL-FT
SS-5GLT
Simulated hinge lever
SS-5GL13-F (see note) SS-5GL13-FT
SS-5GL13-FD
(see note)
50 g
16 g
SS-5GL13 (see note)
SS-5GL2-F (see note)
SS-5GL13T
SS-5GL2-FT
SS-5GL13D (see note)
Hinge roller lever
SS-5GL2-FD
(see note)
50 g
SS-5GL2 (see note)
SS-10 (see note)
SS-5GL2T
SS-10T
SS-5GL2D (see note)
SS-10D (see note)
10.1 A (standard Pin plunger
rivet contact)
150 g
Hinge lever
50 g
50 g
SS-10GL (see note)
SS-10GLT
SS-10GLD (see note)
Simulated hinge lever
SS-10GL13 (see note)
SS-10GL13T
SS-10GL13D
(see note)
Hinge roller lever
50 g
SS-10GL2 (see note)
SS-10GL2T
SS-10GL2D (see note)
Note: EN61058-1 (IEC1058-1) approved by TÜV Rheinland.
89
SS
SS
Model Number Legend
SS-jjjj
1
2
3
4
1. Ratings
01: 0.1
3. OF Max. (at Pin Plunger)
A
None: 150 gf
5: 5 A
-F:
-E:
50 gf
25 gf
10: 10 A
2. Actuator
4. Terminals
None: Pin plunger
GL: Hinge lever
None: Solder
T:
Quick-connect (#110)
PCB
GL13: Simulated hinge lever
GL2: Hinge roller lever
D:
Specifications
Ratings
Type
Rated voltage
SS-10, SS-5
SS-01
Non-inductive load
Inductive load
Non-inductive
load
Resistive load
Lamp load
NC NO
Inductive load
NC NO
3 A
Motor load
NC NO
Resistive load
NC
NO
NC
0.1 A
---
NO
General-
purpose
125 VAC
250 VAC
8 VDC
5 (10.1) A
3 (10.1) A
5 (10.1) A
5 (10.1) A
4 A
1.5 A
1 A
0.7 A
0.5 A
2.5 A
1.5 A
3 A
1.3 A
0.8 A
2 A
2 A
5 A
4 A
---
14 VDC
30 VDC
125 VDC
250 VDC
2 A
4 A
4 A
3 A
---
2 A
3 A
3 A
3 A
0.1 A
---
0.4 A
0.05 A
0.03 A
0.4 A
0.2 A
0.4 A
0.2 A
0.05 A
0.03 A
0.2 A
---
Note: 1. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
2. Lamp load has an inrush current of 10 times the steady-state current.
3. Motor load has an inrush current of 6 times the steady-state current.
4. Data in parentheses apply to the SS-10 series only
.
5. If the switch is used in a DC circuit and is subjected to a surge, connect a surge suppressor across the switch.
Contact Form
The normally open (SPST-NO) and normally closed (SPST-NC) types are not listed under Ordering Information. Consult OMRON directly.
SPDT
SPST-NC
SPST-NO
COM
NO
NC
COM
NC
COM
NO
Approved Standards
UL (File No. E32667)/CSA (File No. LR21642)
SEV (File No. 93, 5, 51936, 01)
SS-10 series: 10.1 A at 250 VAC
SS-5 series: 5 A at 250 VAC
SS-5 series: 5 A at 125 VAC, 3 A at 250 VAC
SS-01 series: 0.1 A at 125 VAC, 0.1 A at 30 VDC
EN61058-1 (IEC1058-1) (TÛV Rheinland, File No. T9451450)
SS-5: 5 A at 250 VAC, 5(1) A at 250 VAC
SS-10: 10 A at 250 VAC
SEMKO (File No. 8614026)/VDE (File No. 221)
SS-5 series: 5 A at 250 VAC
SEMKO (File No. 8916091)/VDE (File No. 221)
SS-10 series: 10 A at 250 VAC
90
SS
SS
Characteristics
Operating speed
0.1 mm to 1 m/s (at pin plunger)
Operating frequency
Mechanical: 400 operations/min
Electrical: 60 operations/min
Insulation resistance
100 M
OF 150 gf: SS-01 series:
SS-5, SS-10 series: 30 m
Ω min. (at 500 VDC)
Contact resistance
(initial value)
50 m
Ω
Ω
max.
max.
OF 50 gf: SS-01 series: 100 m
Ω
max.
max.
max.
SS-5 series: 50 m
Ω
OF 25 gf: SS-01 series: 150 m
Ω
Inrush current
NC: 20 A max. for SS-10 and SS-5, 1 A max. for SS-01
NO: 15 A max. for SS-10, 10 A max. for SS-5, 1 A max. for SS-01
Dielectric strength
1,000 VAC (600 VAC for crossbar contact model), 50/60 Hz for 1 min between the same polarities
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each
terminal and non-current-carrying metal part
Vibration resistance
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
2
Shock resistance
Mechanical: OF 150 gf: 1,000 m/s (approx. 100G min.)
2
OF 25/50 gf: 500 m/s (approx. 50G min.)
Malfunction: OF 150 gf: 300 m/s (approx. 30G min.)
2
2
OF 25/50 gf: 200 m/s min. (approx. 20G min.)
Note: Lever-type model: Operating limit position (with a contact separation time of 1 ms max.)
Life expectancy
Mechanical: 30,000,000 operations min. (OT: rated value)
10,000,000 operations min. for SS-10 series
Electrical: 200,000 operations min. (OT: full)
50,000 operations min. for SS-10 series
Ambient temperature
Ambient humidity
Contact
Operating: –25
Operating: 85% max.
Type: Rivet for SS-10 and SS-5, crossbar for SS-01
°C to 85°C (with no icing)
Material: Silver alloy for SS-10, silver for SS-5, PGS alloy for SS-01
Weight
Approx. 1.6 g (pin plunger)
Characteristics Approved by TÜV Rheinland for EN61058-1
Enclosure rating
IP00
Degree of protection
Class 1
against electrical shock
Ambient temperature
Operating cycles
0°C to 85°C (with no icing)
50,000
Proof Tracking Index (PTI) 175 V
Switch category
D
Operating Characteristics
Model
SS-01-E
SS-01-F, SS-5-F
0.49 N (50 gf)
SS-01, SS-5
1.47 N (150 gf)
SS-10
1.47 N (150 gf)
OF max. 0.25 N (25 gf)
RF min.
PT max.
OT min.
0.02 N (2 gf)
0.5 mm
0.04 N (4 gf)
0.5 mm
0.25 N (25 gf)
0.5 mm
0.25 N (25 gf)
0.6 mm
0.5 mm
0.5 mm
0.5 mm
0.4 mm
MD max. 0.1 mm
OP 8.4±0.5 mm
0.1 mm
0.1 mm
0.12 mm
Model
SS-01GL-E
SS-01GL-F, SS-5GL-F
0.16 N (16 gf)
0.02 N (2 gf)
1.2 mm
SS-01GL, SS-5GL
SS-10GL
OF max. 0.08 N (8 gf)
0.49 N (50 gf)
0.06 N (6 gf)
1.2 mm
0.49 N (50 gf)
0.06 N (6 gf)
1.0 mm
RF min.
OT min.
(0.01 N (1 gf))
1.2 mm
MD max. 0.8 mm
0.8 mm
0.8 mm
1.0 mm
FP max.
OP
13.6 mm
8.8±0.8 mm
Note:
Values in brackets are possible when the switch is mounted so that the weight of the lever will not be imposed on the plunger.
91
SS
SS
Model
SS-01GL13-E
SS-01GL13-F, SS-5GL13-F
0.16 N (16 gf)
0.02 N (2 gf)
SS-01GL13, SS-5GL13
0.49 N (50 gf)
0.06 N (6 gf)
1.2 mm
SS-10GL13
0.49 N (50 gf)
OF max. 0.08 N (8 gf)
RF min.
OT min.
(0.01 N (1 gf))
1.2 mm
0.06 N (6 gf)
1.0 mm
1.2 mm
MD max. 0.8 mm
0.8 mm
0.8 mm
1.0 mm
FP max.
OP
15.5 mm
10.7±0.8 mm
Model
SS-01GL2-E
SS-01GL2-F, SS-5GL2-F
0.16 N (16 gf)
0.02 N (2 gf)
1.2 mm
SS-01GL2, SS-5GL2
0.49 N (50 gf)
0.06 N (6 gf)
1.2 mm
SS-10GL2
OF max. 0.08 N (8 gf)
0.49 N (50 gf)
0.06 N (6 gf)
1.0 mm
RF min.
OT min.
(0.01 N (1 gf))
1.2 mm
MD max. 0.8 mm
0.8 mm
0.8 mm
1.0 mm
FP max.
OP
19.3 mm
14.5±0.8 mm
Note:
Values in brackets are possible when the switch is mounted so that the weight of the lever will not be imposed on the plunger.
Engineering Data
Mechanical Life Expectancy
Electrical Life Expectancy
SS-5, SS-01 Series
SS-5 Series
5,000
Without load
Operating frequency: 60 operations/min
Operating frequency: 30 operations/min
cosφ = 1
40,000
30,000
20,000
3,000
1,000
500
125 VAC
300
100
250 VAC
10,000
5,000
50
30
10
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0
1
2
3
4
5
6
7
Overtravel (mm)
Switching current (A)
92
SS
SS
Dimensions
Note: 1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. The following illustration and drawing are for solder terminal models. Refer to page 94 for details on models with quick-connect
terminals (#110) or PCB terminals.
Pin Plunger
7.5
PT
3.2
SS-01(-E, -F)
SS-5(-F)
SS-10
2
OP
2.9
9.5
10.2
2.5
6.4
6.4
2.5±0.07 dia.
3.2
6.4
e, 1.6 dia.
1.6
8.8
7.3
5.1 9.5±0.1
19.8
Hinge Lever
14.5 (see note 2)
t = 0.3
4
SS-01GL(-E, -F)
SS-5GL(-F)
SS-10GL
FP
OP
2.5
9.5
10.2
2.9
6.4
2.5±0.07 dia.
e, 1.6 dia.
3.2
6.4
8.8
7.3
5.1 9.5±0.1
19.8
Note: 1. Stainless steel lever
2. Besides the SS-jGL-series models with a hinge lever length of 14.5, the SS-jGL11-series models with a hinge lever length of 18.5,
the SS-jGL111-series models with a hinge lever length of 22.6, and the SS-jGL1111-series models with a hinge lever length of 37.8
are available. Contact your OMRON representative for these models
Simulated Hinge Lever
15.8
13R
4
t = 0.3
(see note)
SS-01GL13(-E, -F)
SS-5GL13(-F)
SS-10GL13
FP
OP
10.2
9.5
2.5
2.9
6.4
2.5±0.07 dia.
e, 1.6 dia.
3.2
6.4
8.8
7.3
Note: Stainless steel spring lever
5.1 9.5±0.1
19.8
Hinge Lever
14.5
3.2 dia.
ote 2)
SS-01GL2(-E, -F)
SS-5GL2(-F)
SS-10GL2
t = 0.3
(see note 1)
FP
OP
9.5
10.2
2.5
2.9
6.4
2.5±0.07 dia.
ee, 1.6 dia.
3.2
6.4
1.6
8.8
7.3
Note: 1. Stainless steel spring lever
2. Polyacetal resin roller
5.1 9.5±0.1
19.8
93
SS
SS
Terminals
Solder Terminal
Quick-connect Terminal (#110)
2.9
1.6
2.9
1.6
6.4
10.6
7.1
3.2
2.8
8.8
7.3
Three, 1.6 dia. holes
8.8
7.3
COM terminal
6.4
9.5±0.1
3.2
9.5±0.1
19.8
COM terminal
Three, 1.2 dia.
19.8
NO terminal
NO terminal
NC terminal
NC terminal
PCB Terminal
PCB Mounting Dimensions (Reference)
5.25
9.5±0.1
3.25
0.6
7.0
2.9
1.6
3.3
0.5
8.8
7.3
1.2
9.5±0.1
COM terminal
Three, 1.35 to 1.5 dia.
3.2
19.8
t = 0.5
NO terminal
NC terminal
(1.6)
+0.15
–0.05
8.8
16.1±0.1
Precautions
Mounting
Spacing
Use two M2.3 mounting screws with spring washers to mount the
switch. ighten the screws to a torque of 0.23 to 0.27 N m (2.3 to
2.7 kgf S cm).
Switch does not have a ground terminal. The minimum thickness of
insulation according to IEC1058-1 is 1.1 mm, and the minimum
clearance between live terminals and mounting plate is 1.6 mm. If
T
S
the proper insulation for the terminator cannot be obtained, add in
sulation such as a separator or insulation cover on the switch.
-
Mounting Holes
Soldering
Two, 2.4 dia. mounting holes or
M2.3 screw holes
When soldering switch terminals, apply a soldering iron rated at
60 W max. and finish soldering quickly within 5 seconds. During sol
dering and 1 minute after soldering, do not apply external force to
the terminals. Solder terminals are provided with a hole for the me
chanical mounting of a conductor
-
-
.
9.5
± 0.1
Conductors for the soldering terminal should be flexible and its
2
cross-section should be 0.5 to 0.75 mm for the SS-5 series and
2
0.75 mm for the SS-10 series.
Actuating
For the secure operation, 60% to 90% of rated overtravel should be
maintained.
Others
If a surge current or inrush current is involved in a DC circuit, it is
recommended to use a cancellation circuit.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. B14-E1-6
94
相关型号：
SS5L
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 60 Volts CURRENT 1.0 Ampere
RECTRON
©2020 ICPDF网 联系我们和版权申明