TFS183B [ETC]
Development specification; 开发规范
ETC 
Filename: tfs183b.doc
version 1.0
20.08.2003
VI TELEFILTER
Development specification
TFS 183B
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances *
Input:
22
0
°C
dBm
t.b.d.
t.b.d.
Output:
Characteristics
Remark:
The reference level for the relative attenuation a of TFS183B is the minimum of the pass band attenuation a
. This value is defined as the insertion
min
rel
loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 20 dB filter attenuation level relative to the insertion
e
c
loss a . The given values for the relative attenuation a and the group delay ripple have to be reached at the frequencies given below, even if the centre
e
rel
frequency f is shifted due to the temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the
c
f
centre frequency f .
c
D a t a
typ. value
tolerance / limit
Insertion loss
a
= a
min
-
max.
9
dB
e
Nominal frequency
Centre frequency
f
f
-
183,6 MHz
-
N
c
183,6
MHz
Passband
PB
-
-
fN
±
0,3 MHz
1,25 dB
Amplitude variation within PB
max.
Relative attenuation
fN
fN ±
... fN ±
0,3 MHz ... fN ±
0,3
0,615 MHz
MHz
-
-
max.
max.
1,25 dB
5
dB
fN ±
fN ±
fN +
0,9 MHz ... fN ±
9
12
MHz
MHz
MHz
MHz
-
-
-
-
min. 33
min. 38
min. 45
min. 45
dB
dB
dB
dB
9
MHz ... fN ±
12
MHz ... fN + 183,6
fN - 172,6 MHz ... fN -
Phase linearity within
Input power level
12
PB
-
-
max.
2,8 ° rms
dBm
max. + 10
Operating temperature range
Operable temperature range
Storage temperature range
-
-
-
- 30 °C ... + 85 °C
- 40 °C ... + 85 °C
- 40 °C ... + 85 °C
Temperature coefficient of frequency
Frequency inversion temperature
TCf **)
T0
- 0,036 ppm/K2
-
-
t.b.d.
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TC (ppm/K²) x (T-T0)² x f (MHz)
To
f
generated:
checked / approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs183b.doc
version 1.0
20.08.2003
VI TELEFILTER
Development specification
TFS 183B
2/5
Construction and pin connection
(all dimensions in mm)
9,3 Max.
8
7
6
1
2
3
4
5
6
7
8
9
10
Ground
Ground
Ground
Output
Output RF-Return
Ground
Ground
Ground
Input
5
4
9
TFS 183B
●
R34
10
1
3
2
Date code
Input RF-Return
2,54 ±0,12,54 ±0,1
0,10
2
3
1
4
5
Date code: Year + week
10
9
N
P
2001
2002
2003
R
...
8
7
6
0,8
7,1
50 Ω test circuit
t.b.d.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs183b.doc
version 1.0
20.08.2003
VI TELEFILTER
Development specification
TFS 183B
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W
:
16
4
± 0,3
± 0,1
Po
:
Po
P
2
Do
Do
E
:
:
1,5 + 0,1
1,75 ± 0,1
E
Ao
F
:
7,5 ± 0,1
0,60
F
G (min) :
D 1
W
Bo
CT
P2
P1
:
:
2
± 0,1
± 0,1
8
D1(min) :
1,5
G
Ao
Bo
CT
:
:
:
5,30 ± 0,1
9,70 ± 0,1
13,5 ± 0,1
P1
COVER TAPE
W
2
Reel (all dimensions in mm):
A
:
330
W1
W2 (max) :
:
16,40 +2,0
22,4
N (min)
C
:
50
C
A
:
13,0 + 0,5/-0.2
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs183b.doc
version 1.0
20.08.2003
VI TELEFILTER
Development specification
TFS 183B
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
pre-heating periods
main-heating periods
over 200 °C
peak temperature
255 °C ± 5 °C
Temperature: 150 °C - 170 °C
Time:
60 sec. - 90 sec.
20 sec. - 25 sec.
Chip-mount air reflow profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
time / sec.
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
140
150
160
170
180
190
195
200
205
210
215
220
230
240
160
161
164
170
180
205
230
255
230
205
180
165
140
120
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs183b.doc
version 1.0
20.08.2003
VI TELEFILTER
Development specification
TFS 183B
5/5
History
Version
Reason of Changes
- generation of development specification
Name
Date
20.08.2003
1.0
Pfeiffer
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号：
©2020 ICPDF网 联系我们和版权申明