UPD72891 [ETC]
UPD72891.72893 Pamphlet | Pamphlet[10/2001] ; UPD72891.72893小册子|小册子10/2001 ]\n型号: | UPD72891 |
厂家: | ETC |
描述: | UPD72891.72893 Pamphlet | Pamphlet[10/2001]
|
文件: | 总2页 (文件大小:71K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
µ PD72891,72893
IEEE1394 Link Layer Controller with DV Codec
Description
The µPD72891 and 72893 are a IEEE1394 link layer controllers developed for digital AV systems and feature an on-
chip 32-bit RISC CPU (V850E) for IEEE1394 processing.
These link layer controllers have two stream interface channels to transmit/receive image data conforming to the
IEC61883 Standard, such as MPEG and DV, and these channels can be independently used for transmission and
reception. In addition, a total of 8 Kbytes of FIFO buffer space is provided to transmit/receive isochronous signals. This
buffer space can be allocated as transmit and receive FIFO buffers in 2 Kbytes units.
The µPD72891 and 72893 support IEEE1394 bus control and AV/C commands via the on-chip CPU, as well as
external control using either a serial or a parallel interface.
Features
• All functions required for Digital AV 1394 interface are
equipped in a single-chip
• Compliant to IEEE1394-1995 and IEEE1394a-2000
• Supports 400 Mbps, 200 Mbps, 100 Mbps speed
• 3.3 V/2.5 V power supply
• On chip 32-bit RISC CPU
• Package : 208-pin QFP
• Copy Protection circuit equipped (the µPD72891 only)
• Full duplex MPEG/DV transmission supported
• On-chip IEC61883 function
Block Diagram of the µPD72891
MPEG
TS I/F
(8 bits)
IEC61883
MPEG2
Decoder
&
TS
I/F
Copy
PHY
27 MHz
TS_CLK
Protection
Link
I/F
Link Core
Async I/F
PHY
REC656
(8 bits)
IEC61883
&
CSR
TS
I/F
Copy
MPEG2
Encoder
Protection
Async Async
Tx FIFO Rx FIFO
2 KB 2 KB
PCM
Serial I/F
Link I/F
VCLKI/MCK44/MCK48
VCLKO/MCKO
DV
Bus Controller
Decoder
Encoder
16M
SDRAM
CPU
SIO,
Port,
NB85E
HOST
I/F
CPU
I/F
ROM:192 KB
RAM: 60 KB
Timer…
(68k / ISA)
System controller can
select either.
UART I/F
Application and Companion Chip
• Application
• Companion Chip
• Set-top Box
• Digital VHS, DVD-RW, AV HDD
• Digital Television
• µPD72852 : 2-port low power PHY compliant with
IEEE1394a-2000
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. S15787EJ1V0PF00 (1st edition)
Date Published October 2001 NS CP(K)
Printed in Japan
2001
Device Solution for Digital AV
IEEE1394 AV-Link
1394
AV Link
DV
Codec
DTCP Copy
protection
Digital AV
Interface
Digital AV
Interface
IEEE1394
Interface
Stream
Interface
MPEG2 AV Encoder
MPEG2 AV Decoder
Analog
Tuner Unit
MPEG2
Encoder
TS/PS
Mux
1394
Interface
MIPS-16 MPEG2 AV
CPU
Decoder
Stream
Interface
MPEG2
Transcoder
TS/PS
IDE
Graphics
NTSC/PAL
Decoder
Demux Interface VideoEnc
Digital
Tuner Unit
Analog
Television
DVD
HDD
Coax
URL
http://www.ic.nec.co.jp/
•
The information in this document is current as of September, 2001. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
•
•
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
•
•
•
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4
相关型号:
UPD750004CU-XXX
Microcontroller, 4-Bit, MROM, 6MHz, MOS, PDIP42, 0.600 INCH, 1.778 MM PITCH, SHRINK, PLASTIC, DIP-42
NEC
©2020 ICPDF网 联系我们和版权申明