VMP4PX_技术文档

* Please visit the product pages on our website for the most up-to-date product information

ABOUT SWITCHCRAFT, INC.

CATALOG SECTIONS

Switchcraft, Inc. was established in 1946 to manufacture

jacks, plugs and switches, from its original plant located

on West Diversey Street in Chicago. The company moved

to a larger facility at 1328 North Halsted Street in 1948, and

in 1958, the operation moved to 5555 North Elston Avenue,

which is still the headquarters of the corporation.

Connectors . . . . . . . . . . . 1-78

Jacks & Plugs . . . . . . . . . 79-162

Jack Panels . . . . . . . . . . . 163-238

Switchcraft is a leading supplier of a broad line of components

for the audio/video, broadcast, telecommunication,

computer, medical, military, appliance, transportation and

instrumentation industries.

Patch Cords and

Molded Cable

Assemblies . . . . . . . . . . . 239-268

Switches . . . . . . . . . . . . . 269-318

Index by Part Number . . . 319-328

In the 185,000-square-foot Chicago facility, Switchcraft

manufactures electronic and elecromechanical compo-

nents, including:

• Jacks

• Plugs

• Connectors

• Patch Panels

• Switches

• Jackfields

• Patch Cords

• EAC Power

Receptacles

• Molded Cable Assemblies

With a basic line of over 5,000 standard products and

thousands of variations, Switchcraft is proud to offer a

limited lifetime warranty on all products.

Switchcraft markets products both domestically and

internationally through a network of manufacturers’

representatives and independent distributors.

In 1999, Switchcraft acquired the Conxall Corporation

located in Villa Park, Illinois. Conxall was founded in 1971

as a manufacturer of sealed connectors for the marine

industry. Today, the company offers a broad line of custom

cable assemblies and connectors used in marine, industrial,

sensor, communications and transportation applications.

For more information contact Conxall at (630) 834-7504, or

visit their website at www.conxall.com.

LIMITED LIFETIME WARRANTY

Switchcraft warrants all of its products to be of sound

design, good materials and workmanship at the time of

manufacture.

Switchcraft will repair or replace at its discretion any product

proven to be defective under normal use.

Visit us on the net:

www.switchcraft.com

Switchcraft’s liabilty under the terms of this warranty is limited

to the repair or replacement of defective products which

have not been damaged through accident, abuse, misuse

or unauthorized repair. Switchcraft shall in no case be liable

for special or consequential damages of any nature.

Switchcraft^®. . .

Consistently Excellent Since 1946^sm

i

PHONE: 773 792-2700

* Please visit the product pages on our website for the most up-to-date product information

SL18 Male/Female Receptacles ................................................64

CONNECTORS AND RECEPTACLES

CB CONNECTORS MICROPHONE CONNECTORS,

MINI-CON MINIATURE CONNECTORS .......................................65

Q-G® XLR CONNECTORS.........................................................1-30

Q-G® Connector Part Numbering System....................................2

Professional Series Q-G® Connector Part Numbering System.......2

Q-G® Audio Connectors A, AA, AND QGP Series....................3-4

Part Numbers - Male Cord Plugs/Female Cord Plugs ..................4

Q-G® Color Flex Reliefs/Flex Relief .............................................5

AAA XLR Connectors ................................................................6-7

P(*)M Gooseneck Plug, P(*)F Microphone Plug,

HP75BNC SERIES BNC CONNECTORS ................................66-67

EAC RECEPTACLES ...............................................................68-77

RAPC322 POWER INLET SOCKET .............................................78

R(*)MZ Cord Plug, R(*)FZ Cord Plug ...........................................8

D(*)M, D(*)F and D(*)FD Receptacles ..........................................9

T(*)F and T(*)FM Cord Plug With On-Off Switch ..........................9

B(*)F Receptacle, C(*)F Receptacle, B(*)M Receptacle,

JACKS AND PLUGS

C(*)M Receptacle........................................................................10

E Series Receptacles.............................................................11-15

EH Series Receptacles ...............................................................16

PQG® Receptacles................................................................17-18

PD Series - Plastic Panel Mount ...........................................19-21

Y3F, Y3FPC, Y3FDPC and Y3MPC Receptacles........................22

F Series Receptacles ............................................................23-24

Q-G® Adapters, Accessories .....................................................25

Q-G® Wall Plate Receptacles ....................................................26

Q-G® Connector-Adapters.....................................................27-28

S*FM Audio Connector-Adapter .................................................28

Audio “Y” Adapters .....................................................................28

DMX Adapter ..............................................................................29

Q-G® Connector-Adapter Receptacles ......................................30

Z Matching Transformers, Series M(*)M, Series L(*)MN ............30

JACK SCHEMATICS ................................................................79-80

1/4" LONG FRAME TELEPHONE JACKS ...............................81-85

1/4" Jack Blocks .........................................................................86

BANTAM TYPE® JACKS ..........................................................87-90

TT-JAX® (.173") Telephone Jacks Bantam Type® ................87-88

TT-JAX® (.173") Telephone Twin Jacks Bantam Type® .............89

TT-JAX® (.173") Telephone Triple Jacks Bantam Type® ............90

RTT Series Miniature Telephone Jacks,

Right Angle, PC Mount .........................................................91-92

.177" Enclosed Jacks .................................................................93

LITTEL JAX® 2- AND 3-CONDUCTOR,

1/4" PHONE JACKS ...............................................................94-109

Hi-D Jax® 2- and 3-Conductor .............................................96-99

Spring Lock PC Terminals for Hi-D Jax® .................................100

SN Series, RA Series Right-Angle Phone Jacks ..............101-105

500 Series Jack Covers ...........................................................106

Series E (Locking) and Thick Panel Phone Jacks ...................107

1/4" Extension Jacks and 1/4" Speaker Jacks .........................108

1/4" Shielded Phone Jacks, SF-Jax®

TINI Q-G® MINIATURE CONNECTORS .................................31-37

Tini Q-G® Audio Adapters ..........................................................31

TB(*)M AND TB(*)MB Receptacle,TLP(*) Looping Plug, Straight

Female Looping Plug, Reverse Gender TQG Series .................33

TRA(*)M PC Mount Male Receptacle ........................................34

TRASM*M, TRAPC*M Series ...............................................34-36

TY(*)F and TY(*)FPC Receptacles,TYEF Escutcheons,

TQG(*)F and TQG(*)M Connector Inserts, TBA(**)

Audio Adapter .............................................................................37

Short Frame Jacks ...................................................................109

.141" MINIATURE PHONO JACKS .......................................109-111

3.5MM DUAL STEREO JACK ...............................................112-113

3.5MM SINGLE MONO AND STEREO JACKS ...................114-118

3.5MM SINGLE MONO JACKS ...................................................119

2.5MM SINGLE MONO AND STEREO JACKS ..........................120

.101" SUBMINIATURE PHONE JACKS ...............................121-122

RCA PHONO JACKS AND PHONO JACK SETS ................123-129

RIGHT ANGLE MINIATURE POWER JACKS ......................130-133

STRAIGHT MINIATURE POWER JACKS ............................134-135

VJ SERIES VIDEO JACKS ..........................................................136

MVJ SERIES VIDEO JACKS .......................................................137

HPC HIGH POWER AUDIO CONNECTORS ...........................38-40

EN3TMini WEATHERTIGHT CONNECTOR SERIES ..............41-45

2 - 8 pin Cord Connector, 9 - 18 pin Cord Connector ................43

2 - 8 pin Panel Connector, 9 - 18 pin Panel Connector .............44

2 - 8 pin Inline Connector, 2 - 8 pin Overmolded Cord

and Inline Connector ..................................................................45

DIN CONNECTORS .................................................................46-55

Plugs .....................................................................................46-48

Panel Mount Receptacles .....................................................48-50

Right Angle PC Mount Receptacles .....................................51-52

Mini-DIN Right-Angle Receptacles, Right-Angle, PC Mount

Receptacles ..........................................................................47-53

SMD Series ................................................................................54

DMD Series ................................................................................55

USB CONNECTORS ................................................................56-57

IEEE 1394 FIREWIRE CONNECTORS ...................................58-59

SLIM-LINE CONNECTORS ......................................................60-64

Cord Plugs .................................................................................60

Slim-Line Connector Part Numbering System, Cable Clamp and

Strain Relief ................................................................................61

SL40-SL41 Male/Female Cord Plugs .........................................62

SL10-SL17 Male/Female Receptacles .......................................63

MIL-TYPE 1/4" PHONE PLUGS ...........................................138-141

Littel Plug® Phone Plugs .........................................................139

MIL-TYPE 1/4" EXTENSION JACKS ...........................................142

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

ii

FAX: 773 792-2129

* Please visit the product pages on our website for the most up-to-date product information

TELEPHONE PATCH ADAPTERS ..............................................142

BANTAM TYPE MINIATURE TELEPHONE PLUGS ............143-144

TT5202000, TT5502000, TT5602000 ...............................217-218

TT-Jax® (.173") Twin Row and Three Row Jack Panels....219-220

TT-Jax® (.173") Connectorized Jackfields - Series TT,

2-wire, 4-wire, 6-wire .........................................................221-229

TT® Lamps and Jewel Assemblies ..........................................230

Longframe Switchboard Switches ............................................231

Dummy Plugs and Hole Plugs .................................................232

TT® (Bantam) Circuit Guard Plugs ..........................................233

Miniature, Dummy Plugs, Hole Plugs .......................................234

Designation Strips .............................................................235-236

Kwik-Change® Designation Strips (Double Height) .................237

X-Wide® Vertical Designation Strips ........................................238

1/4" COMMERCIAL PHONE PLUGS -

LITTEL-PLUG® PLUGS .......................................................145-147

Silent-Plug And Lug® Phone Plugs .........................................148

Audio Loudspeaker and Heavy Duty 1/4"

Commercial Phone Plugs .................................................149-150

.206" Commercial Phone Plugs ...............................................151

1/4" Miti-Plug® Audio Plugs .....................................................152

1/4" Flat Plug Phone Plugs ......................................................153

Right-Angle Phone Plugs .........................................................154

1/4" Lock-Extension Jacks And Plugs ......................................155

PATCH CORDS AND

MOLDED CABLE ASSEMBLIES

3.5MM HEAVY DUTY STEREO PLUGS .....................................156

.141" MINIATURE PHONE PLUGS .............................................157

.097" SUBMINIATURE PHONE PLUGS ......................................158

AUDIO ADAPTERS .....................................................................159

RCA PHONO PLUGS ...........................................................160-161

MINIATURE POWER PLUGS ......................................................162

MOLDED CABLE ASSEMBLIES ..........................................239-261

Design Materials and Features ................................................239

3.5MM Molded Cables .............................................................240

Power-Plug Battery Charger Plugs and Jacks .........................241

Power Plugs and Jacks Part Numbering System .....................242

EN3T MINI Weathertight Overmolded Cable Assemblies ........243

Cordette® and Cord Switch Assemblies ....................................44

Cordette® Switches .................................................................245

DIN Plugs ..........................................................................246-248

MIDI Cables ..............................................................................249

Miniature, Shielded, Molded Tini Q-G® Plugs .........................250

Molded Cable Assemblies for Multi-Pin Interconnection

Part Numbering System ...........................................................251

Standard Multi-Pin Interconnection Cables ..............................252

Micro Plug® Subminiature Phone Plugs ..................................253

Tini Plug® Miniature Phone Plugs ...........................................254

Phono Plugs and Phono Extension Jacks ...............................255

Tini-Extension® Jacks ..............................................................256

Littel Plug® Phone Plugs ..................................................256-257

Extension Jax® Phone Jacks ...................................................257

Cable Clamp Bands, “Y” Junctions ..........................................258

Part Numbering System ...........................................................259

Standard Cable Guide ..............................................................260

Cross Reference Guide ............................................................261

JACK PANELS, PATCH PANELS, PATCH KITS AND

JACKFIELDS

AUDIO PATCHBAYS .............................................................163-190

Professional Punchdown Terminal (PPT)..................................163

Front Access MTPFA/TTPFA Series..................................164-165

MTP48K Wired Audio Series .............................................166-167

TTP96K Wired Audio Series ..............................................168-169

MTPH/TTPH Harness Audio Series...................................170-173

MTPBP/TTPBP Backpanel Series .....................................174-175

EZ NORM Patchbay Series ...............................................176-177

TT96 EDAC Series.............................................................178-179

TTP96K Patchkit Series ....................................................180-181

MT48K/MT52K Patchkit Series..........................................182-183

MT48/MT52 Patchbay Series.............................................184-185

TTP96AS Patchbay Series ................................................186-187

Q-G®XLR Patchbay Series................................................188-189

HPC Patchbay Series................................................................190

AUDIO/VIDEO PATCHCORDS ............................................262- 267

1/4" Longframe Telephone Patch Cords, MIL Type 1/4" Patch

Cords ........................................................................................262

Combination Patch Cords and MIL Type

1/4" Twin Patch Cords .............................................................263

Miniature TT® Braided Patch Cords .......................................264

Miniature TT® Molded Patch Cords

RS 422 DATA PATCHBAY SERIES ......................................191-192

and Telephone Couplers ..........................................................265

Video Patch Cords ...................................................................266

Broadcast Series 3-Conductor Bantam TT Patch Cords,

Analog-AES/EBU Audio, and RS422 Patching ........................267

VIDEO PATCHBAYS .............................................................193-201

VPP Video Patchbay Series ..............................................193-195

MVP Midsize Video Patchbay Series ................................196-198

VAP Video/Audio Patchbay Series ....................................199-200

MBPK Video/Audio Patchbay Series ........................................201

SWITCHES

TELECOM TYPE JACK PANELS .........................................202-238

Long Frame (1/4")Single Row Telephone Jack Panels ....202- 203

Long Frame (1/4") Twin Row Jack Panels ........................204-205

Long Frame (1/4") Modular Twin Row Jack Panels ..........206-209

Long Frame (1/4") Modular 3 Row Jack Panels .......................210

TT-Jax® (.173") Jack Panel Series 1600, A1600,

B1600, C1600 ...................................................................211-214

Modular TT-JAX® (.173") Panels -

Blank Series TT51, TT53, TT56, TT59 .....................................215

TT Module Inserts - Series TT91, TT92 And TT93 ..................216

Modular TT-Jax® (.173") Jack Panels -Series TT5102000,

PUSHBUTTON SWITCHES

IBS Series Miniature Keyboard Switches .................................269

IBS Keyboard Switch Pushbuttons ...........................................270

US Series Uniswitch® Switches ...............................................271

BXR Series Box Switch® Switches ..........................................272

Button-Switch® Switches, Tini-Switch® Switches ...................273

Littel-Switch® Switches ............................................................274

Hi-D Switch® PC Mount Switches, DA-Switch Switches .........275

Cord-Switch® Cord Switches, Cordette® Cord Switches ........276

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

iii

PHONE: 773 792-2700

* Please visit the product pages on our website for the most up-to-date product information

Push-Lite® Switches and Indicators .................................277-281

Series PL9000 - PL® Indicators, Pushbutton/Indicator

Screens, Color Filter Snap-Insserts, Optional

Mounting Barriers, Light Divider ...............................................278

Part Numbering System ...........................................................279

Outline Dimensions ...........................................................280-281

SLIDE SWITCHES ...............................................................282-290

General Purpose Slide Switches ......................................284-287

Miniature Slide Switches ...................................................288-290

Side-Slide®/Miniature Slide Switches ......................................290

European Line Voltage Selector Switches ........................291-293

LEVER SWITCHES ..............................................................294-298

GENERAL PURPOSE STACK SWITCHES .........................299-300

MULTIPLE STATION SWITCHES .........................................301-302

Littel® Multi Switch ............................................................303-308

DW Multi-Switch ................................................................309-311

Tini® DW Multi-Switch ......................................................312-313

IBS Multi-Switch - Series IBS ...........................................314-315

Multi-Switch Pushbuttons ..................................................316-317

INDEX BY PART NUMBER ...................................................319-328

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^Q-G^®^CONNECTORS1

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTORS

SECTIONALIZED VIEW - A3F Plug to B3M Receptacle

Field-proven Switchcraft Q-G ^®(Quick-Ground) 3- through

7-contact audio connectors with ground terminal and ground

contactors are available in a wide range of plugs and

receptacles for microphones, test equipment, instrumentation,

computers, video cameras, mixing consoles, tape recorders,

PA and sound reinforcement, stereo systems and many more

applications.

MALE RECEPTACLE

Ground Terminal

FEMALE CONNECTOR

Panel

Latch Lock

Switchcraft Q-G^®connectors feature a separate ground-terminal

electrically integral with connector shell. Ground continuity

between mating plugs is automatically accomplished through

exclusive “Dual Point” grounding system. Socket and pin

assemblies utilize “wedge-action” to insure firm, reliable

positioning in connector shell. Inserts are easily removable for

wiring and soldering. High-impact thermoplastic insures long

reliable insert assembly life. Female connectors have latch lock

feature to hold connectors firmly together. Plugs and receptacles

are mechanically keyed for proper mating. Q-G (*) Series 3-,

4-, 5-, 6-, and 7-pin/contact connectors offer 4-,

5-, 6-, 7-, and 8-pin contact versatility when ground-terminal is

used. Switchcraft QGP connectors; are compatible with

3- and 4-contact (Neutrik, Amphenol 91-850 and Excellite

91-450 Series, and Cannon XLR-3, XLR-4): 5-contact (Neutrik,

Cannon XLR-5 and Amphenol Excellite 91-450 Series).

Insert set screw

(Shell ground)

Ground Terminal

Cable Clamp

Strain Relief

Insert

Shell

DESIGN FEATURES

CONSTRUCTION: Sturdy, die-cast zinc with satin nickel

finish or Black-Velvet^®finish to withstand hard use – even

abuse. Vel-Tone non-reflective finish on QGP connectors only.

INSERT INSULATION: High-impact, molded thermoplastic

provides high dielectric strength, and superior insulation

resistance.

Captive Design^®Insert Screws

LOCKING: Latchlock on female plugs and receptacles locks

into groove in mating male connector to prevent accidental

disconnect. Manual release of latchlock is required to

separate connectors. Q-G connectors are also available with

FAS-DISCONNECT detent in place of latchlock. QGP has die-

cast latchlock.

FAS-DISCONNECT: FAS-DISCONNECT detent permits

immediate disconnect of locked connectors with a 4-pound

(1.8 kg) force. FAS-DISCONNECT connectors are not

recommended for use in situations where strong or violent

pulls on cable may occur and cause accidental disconnect.

Available on Q-G connectors only.

Insert screw engages as any conventional screw, except it is

lefthand threaded. To disassemble the connector, turn screw

counterclockwise down into insert (see illustration).

DUAL PRESSURE PLATES: A*F and A*M Series provides

secure cable lock and strain relief for all standard size cables.

FLEX RELIEF: TPR cable flex relief bushings on cord plugs

are keyed to shell. Standard bushing opening accepts cables

from .21" to .3" diameter Bushings with other openings

accommodate cables from .105" to .205" diameter and from

.3" to .328" diameter.

Insert assembly is now readily removed from shell. Note

“Ground Terminal” area – large soldering cups make cable

installation fast and easy. Unitized 1-piece insert eliminates

possible loss of latchlock and spring.

CONTACTS: Q-G female connectors are copper alloy,

silver-plated, tarnish-resistant; male contacts are copper alloy,

silver-plated, tarnish-resistant. Gold-plated female contacts

are copper alloy. Male contacts are gold-plated.

WIRING: Large, unique design solder cups make wiring fast

and easy. Certain receptacles are also available with PC

terminals for use with printed circuit boards.

To reassemble, replace insert assembly into shell, align insert

screw under hole in shell and secure insert by turning insert

screw clockwise. This “wedges” insert against interior of shell

providing a rigid connector assembly and positive electrical

continuity between ground terminal and shell (see illustration).

Grounding and Shielding

Tightening the insert screw establishes continuity between

ground terminal, ground contactors and connector housing.

Upon engagement with a mating plug or receptacle, the

ground circuit is automatically connected to the mating shell

through the ground contactor. Any pin or contact can be

grounded by “jumping” it to the ground terminal. Contact

1 engages before all other contacts and disengages after all

other contacts.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

QG^®PART NUMBERING SYSTEM

2

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTOR PART NUMBERING

Number of

Series

Contacts

Gender

Options

A

CORD PLUG WITH SCREW CABLE CLAMP

CORD PLUG WITH CRIMP CABLE CLAMP

CORD PLUG WITH TWIST ON HANDLE

3-7

M MALE

D

B

FAS-DISCONNECT (FEMALE CONNECTORS)

BLACK EPOXY FINISH

AA

AAA

F FEMALE

FM BOTH

(S SERIES)

B

C

D

FRONT PANEL MOUNT USING NUT

FRONT PANEL MOUNT - CIRCULAR

FRONT PANEL MOUNT - RECTANGULAR

ST

RA

M

STRAIGHT PC TAILS

RIGHT ANGLE PC TAILS

MOMENTARY SWITCH ACTION

(T SERIES ONLY)

E

G

H

J

MODULAR FRONT PANEL MOUNT

WALL PLATE - 1 B SERIES MALE

PC

N

PC TERMINALS

(Y SERIES ONLY)

KNURLED COUPLING NUT (L SERIES ONLY)

FLEX RELIEF FOR .250" TO .328" CABLE O.D.

SEE NOTE 1.

WALL PLATE - 2 B SERIES MALES

WALL PLATE - 1 D SERIES FEMALE

WALL PLATE - 2 D SERIES FEMALE

MICROPHONE ADAPTER - INTERNAL THREAD

L

S

K

L

AU

H

GOLD CONTACTS

HOUSING ONLY

M

N

MICROPHONE ADAPTER - EXTERNAL THREAD

CAP PLUG

OPTIONS SHOWN IN ORDER OF APPEARANCE

SCREWLESS STRAIN RELIEF

Z

P

GOOSENECK MOUNT

QG

R

CONNECTOR INSERT

RIGHT-ANGLE CORD PLUG

MALE/FEMALE BARREL ADAPTER

CORD PLUG WITH ON-OFF SWITCH

RIGHT-ANGLE PANEL MOUNT

REAR PANEL MOUNT

S

T

W

Y

NOTE 1: S HAS DIFFERENT DESIGNATIONS DEPENDING ON THE SERIES.

FOR A, AA, AND T SERIES: SMALL FLEX RELIEF FOR .105" TO .205" CABLE OUTSIDE DIAMETER

FOR B, C, AND D SERIES: SANDED FRONT FACE FINISH

FOR G, H, J, AND K SERIES: STAINLESS STEEL WALL PLATE (STANDARD)

FOR N SERIES: SHORTING WIRING INSTALLED

NOTE 2: J, K AND T SERIES AVAILABLE IN FEMALE GENDER ONLY.

G, H, L, M, N, AND W SERIES AVAILABLE IN MALE GENDER ONLY.

PROFESSIONAL SERIES Q-G^®CONNECTOR PART NUMBERING SYSTEM

Number Of

Series

Contacts

Model

PROFESSIONAL SERIES

3

22

23

FEMALE CORD PLUGS

MALE CORD PLUGS

PROFESSIONAL SERIES CORD PLUG

WITH CRIMP CABLE CLAMP

QGP

AQGP

62

63

RECTANGULAR FEMALE PANEL MOUNT

RECTANGULAR MALE PANEL MOUNT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^Q-G^®^{CORD PLUG CONNECTOR – A, AA AND QGP SERIES}3

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G ^®CORD PLUG CONNECTORS (continued)

Q-G^®AUDIO CONNECTORS A, AA, AND QGP SERIES

Sleek, stream-

lined shell

Solid pins,

silver plated performance

for reliability socket contacts

Bifurcated high

Rugged cable

clamp to ground

(no screws)

Cable

clamp

Durable

metal latch

lock

Rugged

metal shell

Standard nickel

or black finish

Easy change

flex relief for

color coding

“No screws” Solder terminals

Easy change

flex relief for

color coding

Light green, high

“Dual-point

performance insert shell grounding”

“No screws”

retention

system

retention

system

rotated for easy

access & soldering

QGP connectors (3 contacts only) feature Vel-Tone^®

non-reflective finish, gray TPR flex relief and plated

pins/contacts for the most demanding applications.

Preferred by audio professionals the world over, Switchcraft^®

QG^®connectors feature unsurpassed durability and a choice

of finishes and contact platings. Features include:

• High performance inserts in traditional Switchcraft^®green

or black.

MATERIAL

Q-G CONNECTORS (A AND AA SERIES)

Shell: Die-cast zinc. Satin nickel finish, black velvet.

Insert Insulation: Molded thermoplastic.

Socket Contacts: Silver-plated copper alloy tarnish-resistant;

bifurcated on 3-contact type. Gold is available

Pin Contacts: Silver-plated copper alloy. Resists tarnishing,

and provide excellent electrical conductivity. Gold is available.

Latchlock: High-strength die-cast zinc.

• Solder terminals rotated for easier access and soldering.

• All metal housing.

Latch Release: Steel, nickel-plated.

AA Series Only

Latch Detent: Formed stainless steel.

• Rugged 1-piece cable clamp to relieve pulling and twisting

stresses on terminations.

Insert Screw: Stainless steel.

Flex Relief: TPR (thermoplastic rubber).

• No Screws flex relief retention system.

• Integral bump shell grounding system.

QGP CONNECTORS

Shell: Die-cast zinc, non-reflective gray Vel-Tone^®finish.

Socket Contacts: Gold-plated copper alloy

Pin Contact: Gold-plated copper alloy

SPECIFICATIONS

ELECTRICAL

Contact Resistance: 50 milliohm maximum, per pole.

Current Rating: 3 pole – 15A, 4 pole - 10A, 5 and 6

pole – 7.5A, 7 pole – 5A @ 125VAC.

Insulation Resistance: 1,000 MΩ, minimum.

Dielectric Withstanding Voltage: 1,000 V (rms).

Capacitance: 2 pF between pins and 4 pF between pins

and shell, maximum (AA3M and AA3F).

MECHANICAL

Insertion/Withdrawal Forces: 7 pound maximum,

5 pound nominal, insertion; 7 pound maximum,

5 pound nominal, withdrawal.

Wire Size: #12 wire gauge solid; #14 wire gauge stranded

(3 contact). #14 wire gauge solid; #16 wire gauge stranded

(4 contact). #16 wire gauge solid; #18 wire gauge stranded

(5 and 6 contact). #18 wire gauge solid; #20 stranded

(7 contact). (Q-G and QGP).

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

QG^®CORD PLUGS – A AND QGP SERIES

4

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CORD PLUG CONNECTORS (continued)

AA(*)F CORD PLUG

AA(*)FD CORD PLUG

AA(*)M CORD PLUG

PART NUMBERS - MALE CORD PLUGS

PART NUMBERS - FEMALE CORD PLUGS

Advanced Q-G^®Cord Plugs, Series AA(*)F and AQGP

AA3F AA3FB ◊AA3FBAU ◊AA3FD ◊AA3FL ◊AQGP322

Advanced Q-G^®Cord Plugs, Series AA(*)M and AQGP

AA3M

AA3MB ◊AA3MBAU ◊AA3ML

◊AQGP323

3

4

5

6

7

3

4

5

6

7

◊AA4M

—

◊AA4ML

◊AA5ML

◊AA6ML

◊AA7ML

—

AA3FLD

—

◊AA5M ◊AA5MB

◊AA4F ◊AA4FB

◊AA5F ◊AA5FB

◊AA6F ◊AA6FB

◊AA7F ◊AA7FB

◊AA4FD ◊AA4FL

◊AA5FD ◊AA5FL

◊AA6FD ◊AA6FL

◊AA7FD ◊AA7FL

◊AA6M

◊AA7M

—

All above part numbers have black flex relief installed. Contact Switchcraft for

color flex relief.

◊ Available on special order only; contact Switchcraft for price and delivery.

A(*)F CORD PLUG

A(*)FD CORD PLUG

A(*)M CORD PLUG

*Number of insert contacts or pins must be specified to complete part number.

Straight female cord plug with

FAS-DIS-CONNECT detent.

Straight male cord plug.

Straight female cord plug with

standard latchlock. Available in

3-7 pin versions.

PART NUMBERS - FEMALE CORD PLUGS

PART NUMBERS - MALE CORD PLUGS

Standard Q-G^®Cord Plugs, Series A(*)F and QGP

Standard Q-G^®Cord Plugs, Series A(*)M and QGP

Satin

Nickel

Fas-

Dis-

Large

Flex

Satin

Nickel

Finish

Large

Flex

Relief ²

Black Finish

Silver ¹Gold ¹

Insert

Black Finish

Insert

Finish

Connect Relief ²QGP Series

Silver ¹

Gold ¹

QGP Series

Contacts

nContacts

A3M

A3MS ³

A4M

A3MB

—

A3MBAU

—

A3ML

—

QGP323

3

4

5

6

7

A3F

A3FS³

A4F

A3FB

A3FBAU

—

◊A3FD

—

A3FL

—

QGP322

3

4

5

6

7

—

A4MB

A5MB

—

A4MBAU

A5MBAU

A6MBAU

A7MBAU

A4ML

◊A5ML

—

A4FB

A5FB

A6FB

A7FB

A4FBAU

A5FBAU

A6FBAU

A7FBAU

◊A4FD

A4FL

A5M

A5F

◊A5FD ◊A5FL

A6M

A6F

—

A7M

—

A7F

All above part numbers have black flex relief installed. Contact Switchcraft for

color flex relief.

1. Contact plating.

2. Accepts cables from .25" (6.35 mm) to .328" (8.33 mm) diameter

3. Accepts cables from .105" (2.7 mm) to .205" (5.2 mm)

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^Q-G^®^{FLEX RELIEF}5

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTORS (continued)

Q-G^®COLOR FLEX RELIEFS

Part Numbers

3 Pins/Contacts

Flex

Relief

Color

Black

Brown

Red

Orange

Yellow

Green

Blue

Flex

Relief

Only

Rainbow color cable strain relief bushings can be specified

to match or complement equipment decors or code individual

or grouped connections for quick recognition. On special

order, tan, pink and dark blue are available. Bushings

accommodate cables from .21" to .30" diameter.

Prepackaged, 25 per bag.

Female

Male

A3F

A3M

SR00

SR01

SR02

SR03

SR04

SR05

SR06

SR07

SR08

SR09

◊A3F01

◊A3F02

◊A3F03

◊A3F04

◊A3F05

◊A3F06

◊A3F07

◊A3F08

◊A3F09

◊A3M01

◊A3M02

◊A3M03

◊A3M04

◊A3M05

◊A3M06

◊A3M07

◊A3M08

◊A3M09

Violet

Gray

White

◊ Special order only; contact Switchcraft for price and delivery.

Q-G^®FLEX RELIEF

Small Cables

Flex relief bushing with small opening accommodates

cables from .105" (2.7 mm) to .205" (5.2 mm). Standard

size bushing accepts cables from .210" (5.3 mm) to .300"

(7.6 mm) outside diameter. Bushing with large opening

accommodates cables from .300" (7.6 mm) to .328" (8.3

mm). Larger cables are often needed for multiple-conductor

instrumentation. Code letter “L” in last or second to last digit

in part number indicates plug with large bushing. Code

letter “S” in last or second to last digit in part number

indicates plug with smaller bushing.

.105 to .205

(2.7)

(5.2)

Standard Cables

.210 to .300

SWITCHCRAFT PART NUMBER ◊K255

Package of 100 cable clamp screws.

(5.3)

(7.6)

Large Cables

◊ Special order only; contact Switchcraft for price and delivery.

.300 to .328

(7.6)

(8.3)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

AAA CONNECTORS

6

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

AAA CONNECTORS

AAA SERIES Q-G^®TWIST CONNECTOR

Switchcraft introduces the AAA Series or Q-G^®Twist XLR

FEATURES AND BENEFITS

connectors.The Q-G^®Twist Series is available in male or female cord • Only two pieces to assemble

plug, 3 through 7 pins or contacts.The unique features are the easy • Easy twist on handle reduces assembly time

twist on combination handle/strain relief, and the reduced number of • Rugged die-cast metal handle

parts to assemble. With the insert built into the front shell, and the • Accepts cable OD’s (.100" – .285")

strain relief preloaded into the handle, the end user has only two • Black finish available

parts to assemble – slide the handle onto the cable, solder the • Gold-plated pins/contacts available

terminations, and twist on the handle. As the handle is tightened, the • Lower cost plastic handle version available

strain relief tightens around the outer jacket of the cable. A ramp on

APPLICATIONS

• Audio

• Medical

• Instrumentation

the strain relief keeps it from rotating around the cable jacket and

twisting the cable. The strain relief was designed to accommodate

the most popular cable sizes.A rugged die-cast metal handle insures

optimum protection, and increases signal shielding. Popular options

• Process Controls

include black and gold finishes, as well as a lower cost plastic

handle version.

4 Contact

SPECIFICATIONS

#14 wire gauge solid

5 & 6 Contact

#16 wire gauge solid

7 Contact

#18 wire gauge solid

MATERIAL

#16 wire gauge stranded

#18 wire gauge stranded

#20 wire gauge stranded

ELECTRICAL

Contact Resistance: 50 milliohm maximum, per pole.

Current Rating @ 125VAC:

3 pole – 15A

4 pole –10A

5 & 6 pole – 7.5A

Shell: Die-Cast zinc with nickel finish or black chrome.

Handle: Die cast with nickel finish or black chrome.

Also black thermoplastic handle available.

O Ring: TPR (Thermoplastic rubber).

Insert Insulation: Molded thermoplastic.

7 pole – 5A

Insulation Resistance: 1,000 MΩ, minimum.

Dielectric Withstanding Voltage: 1,000 V (rms)

Capacitance: ≤3 pF between pins and ≤6 pF

between pins and shell, maximum

Socket Contacts: Silver plated copper alloy tarnish resistant;

bifurcated on 3 and 4 contact types. Gold is available.

Pin Contacts: Silver plated copper alloy. Resists tarnishing,

and provides excellent electrical conductivity. Gold is available.

Latch lock: High strength die cast zinc.

MECHANICAL

Insertion/Withdrawal Forces: 10 lbs. maximum,

8 lbs. nominal / 7 lbs. maximum, 5 pounds nominal.

Wire Size:

3 Contact

Strain Relief: TPR

Flex Relief: TPR (Thermoplastic rubber)

#12 wire gauge solid

#14 wire gauge stranded

CONNECTOR PART NUMBER SCHEME

Series Pins/Contacts

Gender

Handle Material

Housing

Finish

Terminal

Finish

Z

AAA

3-7 pins

F: Female

M: Male

P: Plastic

Blank: Metal

B: Black

Blank: Nickel

AU: Gold

Blank: Silver

New Strain Relief

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

AAA CONNECTORS

7

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

AAA CONNECTORS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

Q-G^®CORD PLUG CONNECTORS

8

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTORS (continued)

R(*)FZ CORD PLUG

Right angle, female cord mount plug, latching. New style

incorporates an insert that can rotate every 45° for added

flexibility in tight applications. Also utilizes the new strain relief

system with twist-on handle.

R(*)MZ CORD PLUG

Right angle, male cord mount plug, latching. New style

incorporates an insert that can be rotated every 45° for added

flexibility in tight applications. Also utilizes the new strain relief

system with twist-on handle.

Part Number

Insert Pins

Part Number Insert Contacts

R3MZ

R4MZ

R5MZ

R6MZ

R7MZ

3

4

5

6

7

R3FZ

R4FZ

R5FZ

R6FZ

R7FZ

3

4

5

6

7

Accepts cable O.D.'s .100"–.285"

For black finish, add "B" suffix.

Accepts cable O.D.'s .100"–.285"

For black finish, add "B" suffix.

For black/gold finish, add "BAU" suffix.

P(*)F MICROPHONE PLUG

P(*)M GOOSENECK PLUG

Female microphone plug for gooseneck mount. Fits standard

gooseneck with external 5/8-27 thread. Microphone plugs

directly into connector. (Gooseneck not supplied.)

Male plug for gooseneck mount. Fits standard gooseneck with

internal 5/8-27 thread. Use on gooseneck with microphone

plug on opposite end. Plugs directly into female receptacle.

(Gooseneck not supplied.)

Part Number ¹

Insert Contacts

◊P3F

◊P4F

◊P5F

3

4

5

1. Satin Nickel Finish. (standard)

2. Large flex relief accepts cable from .25" to .328" diameter. (optional)

3. Gold-plated contacts. (optional)

Part Number ¹

Insert Pins

◊P3M

◊P4M

◊P5M

3

4

5

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

Q-G^®CORD PLUG CONNECTORS AND RECEPTACLES

9

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CORD PLUG CONNECTORS AND RECEPTACLES

T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH

Part Number

Insert Contacts

◊T3F

◊T3FM

◊T4F

◊T3FL

◊T3FLM

◊T4FL

3

4

◊T4FM

◊T4FLM

T(*)F Straight female cord plug with DPDT (2-C) locking

on-off switch; standard latchlock.

T(*)FM Straight female cord plug with SPDT (1-C)

momentary on-off switch; standard latchlock.

Slide switches rated 500 mA, 125V (AC or DC). Mounting

screws are supplied.

D(*)M, D(*)F AND D(*)FD RECEPTACLES

Studio quality black and gold Q-G^®receptacle with black

housing and gold contacts is designed for low/stable contact

resistance and withstands corrosion where highest quality is

required for recording and broadcast studio equipment,

consoles, and other applications.

Nickel

Finish

Black Finish

Silver

Gold

Detent QGP Series¹Pins

D3M

D4M

D5M

D6M

D7M

D3F

D4F

D5F

D6F

D7F

D3MB

D4MB

D5MB

D6MB

D7MB

D3FB

D4FB

D5FB

D6FB

D7FB

D3MBAU

D4MBAU

D5MBAU

D6MBAU

D7MBAU

D3FBAU

D4FBAU ◊D3FDB

D5FBAU

D6FBAU ◊D6FDB

D7FBAU

—

QGP363

3

4

5

6

7

3

4

5

6

7

—

D(*)M SERIES – Male receptacle for panel or chassis

mounting. Special rectangular flange permits close spacing on

crowded panels, has two .136" (3.45mm) diameter

countersunk holes for #5-40 flat head mounting screws (not

supplied). Mounts from front of panel or chassis in .766"

(19.45) diameter hole. Satin nickel finish (Series D*M) or black

finish (Series D*MB, or D*MBAU).

—

D3FD

—

QGP362

—

D(*)F SERIES – Female receptacle for panel or chassis

mounting. Flange has two .136" (3.45 mm) diameter

countersunk holes for #5-40 flat head mounting screws (not

supplied). Mounts from front of panel or chassis in .953" (24.21

mm) diameter hole. Series D(*)F has standard latchlock; Series

D(*)FD has FAS-DISCONNECT detent. Satin nickel finish

(Series D*F and D*FD) and “Black-Velvet” finish (Series

D*FBAU).

* Number of insert contact or pins must be specified to complete part number.

◊ Available on special order only; contact Switchcraft for price and delivery.

1 Non-reflective gray finish, gold-plated pins.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

Q-G^®RECEPTACLES

10

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®RECEPTACLES (continued)

B(*)F RECEPTACLE

B(*)M RECEPTACLE

Panel-mount female receptacle. Mounts with spanner nut

from front of panels up to .4375" (11.11 mm) thick. Slot in

threaded part of housing permits non-turn mounting.

Requires 1.25" (31.75 mm) diameter minimum mounting

hole. Spanner nut is die-cast zinc with satin nickel finish

(Series B*F) or black finish (Series B*FB).

Panel-mount male receptacle. Mounts with locknut from front of

panels up to .250" (6.35 mm) thick. Requires .812" (20.64 mm)

diameter mounting hole. For non-turning mounting, can be keyed

to “D” shaped panel hole, or S3519 mounting adapter can be used.

Satin nickel finish (Series B*M) or black finish (Series B*MB).

Part No.¹Part No.²Insert Pins

Part No.¹Part No. ²Insert Contacts

B3M

B4M

B5M

B6M

B7M

B3MB

—

3

4

5

6

7

B3F

B4F

B5F

B6F

B7F

B3FB

—

3

4

5

6

7

C(*)F RECEPTACLE

C(*)M RECEPTACLE

Female receptacle for panel or chassis mounting. Flange has

three .140" (3.57 mm) diameter holes for #5-40 mounting

screws (not supplied). Mounts from front of panel or chassis

in 0.953" (24.21 mm) diameter hole.

Male receptacle for panel or chassis mounting. Flange has three

.140" (3.57 mm) diameter holes for #5-40 mounting screws (not

supplied). Mounts from front of panel or chassis in .766" (19.45

mm) diameter hole.

Part No.¹Part No. ⁵

Insert Contacts

Part No. ¹Part No.⁵Insert Pins

C3F

C4F

C5F

C6F

C7F

◊QGP326

3

4

5

6

7

C3M

C4M

C5M

C6M

C7M

◊QGP327

3

4

5

6

7

—

◊ Special order only. Contact Switchcraft.

1. Satin nickel finish. (standard) 2. “Black-Velvet” finish. (optional) 3. Gold-plated contacts. (optional) 4. Fas-disconnect detent. (optional)

5. Non-reflective gray finish, gold-plated pins. (standard)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

E SERIES Q-G^®RECEPTACLES

11

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

E SERIES RECEPTACLES

E Series

Receptacles

Conical Spring

Solder Terminals

Straight PC

Terminals

Solder cup

Right Angle

PC Terminals

E Series Q-G^®Receptacles are available with quick release

inserts. Quick insert release is accomplished by turning

screw lock from front of insert. Insert can then be removed

from the rear. For PC board applications, insert can be

removed/assembled to the housing while soldered to

the PC board.

E Series receptacles can be specified as complete assemblies,

or as separate inserts and housings. Stocking separate

inserts and housings offer considerable cost and time sav-

ings by minimizing inventory and maximizing configuration

possibilities.

FEATURES

3. Right-angle PC terminals - direct termination to PC

board at a right-angle. Housing mounts to panel.

4. SC - Solder cup

• Replaces Neutrik D Series

• 3-pin contact; male and female types

• Both male and female fit in same panel cutout

• Choice of 4 terminations; solder cups, conical springs,

straight or right angle PC terminals.

• Inserts and housings can be specified separately

• Quick release inserts for ease of removal

• Locking receptacles

• Protected ground clip minimizes scooping damage

• Insert lock detent resists disassembly from shock or

vibration during normal handling and transportation

• Silver and gold-plated contacts available

• Rugged metal shells; black or satin nickel finishes

• Through-the-shell ground connection and all-metal

shells for greater shielding effectiveness

• Compatible with Switchcraft Q-G ^®, QGP and other

connectors with similar configurations

SPECIFICATIONS

ELECTRICAL

Contact Resistance: 50 milliohms maximum, per pole.

Current Rating: 15A

Insulation Resistance: 2 X 10⁶MΩ

Dielectric Resistance: 1,000 V rms

Capacitance: 10 pF

MECHANICAL

Insertion/Withdrawal Forces: 7 pounds maximum/

5 pounds nominal insertion; 7 pounds maximum/

5 pounds nominal withdrawal.

Life: 10,000 operations (minimum).

ENVIRONMENTAL

Thermal Range: -55° C to +85° C

Humidity: Meets MIL-STD-202F, method 106E.

Thermal Shock: Meets MIL-STD-202F, method 107D.

Salt Spray: Meets MIL-STD-202F, method 101D.

QUICK RELEASE INSERT

In two simple steps, inserts can be released while

housing stays fastened to the panel.

1. With a small screwdriver, twist insert locking screw

from front of insert.

2. Remove insert from the rear of the housing.

MATERIAL

Shells: Die-cast; satin-nickel or Black Velvet.

Inserts: Glass-filled thermoplastic.

Socket Contacts: Copper alloy, silver- or gold-plated.

Pin Contacts: Copper alloy, silver- or gold-plated.

Latch Release: Steel, nickel-plated.

Insert Locking Cam: Die-cast zinc.

TERMINALS

Four terminations are available on E Series receptacles:

1. Conical Spring Solder terminals – conical spring on

each pin holds wire in place providing constant pressure

during soldering process. This effectively acts as a third

hand, assuring a high quality solder termination.

Housing mounts to panel.

2. Straight PC terminals – direct termination to PC

board. Housing mounts to panel.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

12 ^{E SERIES PART NUMBERING SYSTEM}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

E SERIES PART NUMBERING SYSTEM

CONNECTOR PART NUMBER SCHEME

Series Pins/

Contacts

Gender Fas-disconnect

Option

Termination

Style

Housing

Finish

Terminal

Finish

Mounting Hole

Options

E

3-5 pins F:Female D: Fas-disconnect ST: Straight PC terminals B: Black

AU: Gold

M3:M3 x 0.5 thread

M: Male Blank: Standard

locking

RA: Right angle PCterminals Blank: Nickel Blank: Silver 440: #4-40 thread

SC: Solder cups

Blank: Counter-

sunk hole

Blank: Conical springs*

HOUSING ONLY PART NUMBER SCHEME

Series Pins/

Contacts

Housing

Finish

B: Black

Mounting Hole

Options

M3: M3 x 0.5 thread

E

F: Female

M: Male

Blank: Nickel 440: #4-40 thread

Blank: Counter-sunk hole

INSERT ONLY PART NUMBER SCHEME

Series Pins/

Contacts

3-5 pins

Gender

Fas-disconnect

Option

D: Fas-disconnect

Blank: Standard locking

Termination

Style

ST: Straight PC terminals

RA: Right angle PC terminals

SC: Solder cups

Housing

Finish

Terminal

Finish

AU: Gold

Blank: Silver

E

F: Female

M: Male

Blank: Conical springs*

*3-pin only

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{E SERIES}13

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

E SERIES

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

14 ^{E SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

E SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

E SERIES

15

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

E SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

16 ^{EH SERIES RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EH SERIES RECEPTACLES

The EH Series consist of different styles of popular connectors in

our E Series housing. This allows the end user to punch one single

hole size and populate wall plates, gang assemblies with different

types of connectors. Connector styles include BNC feed-throughs,

RCA feed-throughs, USB feed-throughs, IEEE 1394 Firewire

feed-throughs, BNC to solder cup, and RCA to BNC.

EHBNC2

FEATURES

• Utilizes same panel cut-out as E Series QG connectors

• Rugged metal shells

• Available with a wide variety of popular feed-through connectors

EHRCA2

EHBNC2

EHRCA2

EHBNCSC

EHRCABNC

Part Number

EHBNC2

Description

BNC to BNC

EHBNCSC

EHRCA2

BNC to solder cup

RCA to RCA

EHRCABNC

EHUSB2

RCA to BNC

USB to USB

EH13942

EHCAT62

IEEE1394 to IEEE1394

Cat6 to Cat6

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^PQG^®^RECEPTACLES17

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PQG^®RECEPTACLES

PQG3FRA112

PQG3MRA112

PQG3FST112

PQG3MST112

Q-G^®3 pin/contact PC receptacles offer economy, reliability

and performance in amplifiers, audio mixing boards, and

other outboard gear. Choose receptacles with just the right

combination of standard and optional bonus features to tailor

the PQG series to your exact needs.

SPECIFICATIONS

Housing: Black, glass-filled thermoplastic, UL 94V-0.

Flange mounting holes are .128 inch diameter

Socket Contacts: Copper alloy, electrotinned.

Pin Contacts: Copper alloy, electrotinned.

Latch Release: Steel, nickel-plated.

Mounting Plate: Copper alloy.

STANDARD FEATURES

Shell-to-Ground Terminals: Copper alloy, electrotinned.

Latches: Copper alloy, nickel-plated.

• UL 94V-0 plastic materials.

• Circuit #1 “makes” first and “breaks” last during

connect/disconnect.

• Positive mechanical polarization.

• Minimum PC board space required.

• Integral PC board locating posts.

• Mating/unmating cycles in excess of 10,000.

• Mates with Switchcraft Q-G and other compatible

connectors.

Insertion/Withdrawal Forces: 2 pound (nominal).

Contact Resistance: .05 ohms per pole (maximum).

Dielectric Withstanding Voltage: 1,000 V rms for 1 minute.

Insulation Resistance: 10⁴MΩ @ 500 V DC.

Current Capacity: 10A maximum (carry only).

Operating Temperature: -30°F to 185°F (-34°C to 85°C).

Mechanical Life: 10,000 cycles @ 10 cpm.

OPTIONAL FEATURES

• Positive latch lock or FasDisconnect (female only).

• Shell-to-ground terminal.

• Mounting Plates:

A. Backup Mounting Plate with two, M3 x 0.5 threaded

holes for faster, more rugged mounting to equipment

panel/chassis.

B. “Tri-Mounting” Plate...plus two bifurcated pcb

retainers with snap-in terminals which perform

three valuable functions:

1. Provide ground connection from panel to PCB.

2. Hold connector securely to PCB during wave-soldering.

3. Add strength between panel/chassis and PCB during

soldering by “wicking” solder through the PCB and up

sides of retainers to assure continuity.

C. Two panel grounds are integral with mounting plate.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

PQG^®SERIES PART NUMBERING SYSTEM

18

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PQG^®SERIES PART NUMBERING SYSTEM

3

P

Q

G

SERIES

PQG-

PINS/

CONTACTS

GENDER

PC

LATCHING

GROUND

TERMINAL

MOUNTING PLATE

0 - None

1 - Plate with two,

M3 x 0.5 threaded

holes

2 - Plate with two,

M3 x 0.5 threaded

holes, panel grounds

and PCB retainers

TERMINALS

F - Female

M - Male

0 - None

1 - Latch Lock

2 - Fas-

RA - Right Angle,

0 - None

1 - Installed

Composite QG

3

Bottom Exit

Disconnect

(female

only)

ST - Straight

Rear Exit

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^Q-G^®^{AUDIO RECEPTACLES FOR PC/PANEL MOUNT}19

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®AUDIO RECEPTACLES FOR PC/PANEL MOUNT

PD SERIES - PLASTIC PANEL MOUNT

NEW

Bifurcated

PCB Terminals

PD3FS2

PD3MS1

PD3FRML1

PD3MRML1

PD3FRL1

PD3FS2

PD3FRA1

Bifurcated

PCB Terminals

Switchcraft offers the PD Series (plastic panel mount) audio

connectors with a wide variety of 3-pin/contact, male and

female types and many terminals for combined PC/panel

mount. Female types offer larger contact area for higher ratings

and longer life. Panel mounting may be at users option, either

front or rear. New PD series connectors mate with Switchcraft

Q-G and other compatible types.

SPECIFICATIONS

Housing: Black molded thermoplastic, glass-filled.

Ground Pin: Copper alloy.

Stamped Terminals/Contacts: Copper alloy, electrotinned.

Screw Machine Terminals/Pins: Copper alloy, silver-plated.

BIFURCATED PC TERMINALS

Bifurcation configuration for PC terminals on selected

connectors offers these advantages.

1. Provides convenient snap-in retention for mounting.

2. Holds connector securely to PCB during wavesoldering.

3. Adds strength to all terminal connections by solder

“wicking” through PCB and up sides of terminals.

PD SERIES FEATURES

• 3 pins/contacts

• Male and female

• Straight and right-angle terminals

• PC or PC/panel mount

• Front or rear panel mount

• Special PC/solder terminal type with exits at 0° (down,

90° (right), 180° (top), and 270° (left)

• Rugged molded black glass-filled thermoplastic housings.

BIFURCATED HOLD-DOWN FEATURE

FOR ALL PC TERMINALS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

20 ^{PD SERIES PART NUMBERING SYSTEM}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PD SERIES PART NUMBERING SYSTEM

P

D

3

SERIES

PD

PINS/

CONTACTS

GENDER

MALE

HOUSING

TERMINALS

F - Female

M - Male

1 - Front Mount

.11" (2.8 mm)

FEMALE

Blank=

Silver

RA - Right-angle, RML - Right-angle,

diameter flange

mounting holes

2 - Rear Mount

.091" (2.3 mm)

diameter flange

mounting holes

3 - Front Mount

.126" (3.2 mm)

diameter flange

mounting holes

Bottom Exit

RL - Right-angle,

Left exit

Bottom Exit,

Long Screw

Mach. Term.

terminals

AU=

Gold

terminals

RR - Right-angle, RMS - Right-angle,

Right Exit

RU - Right-angle,

Top Exit

RML - Right-angle,

Bottom Exit,

Short Screw

Mach. Term.

- Straight,

S

Rear Exit

Long Screw SC - Solder Cup

Mach. Term.

RMS - Right-angle,

Bottom Exit,

Short Screw

Mach. Term.

- Straight,

Note: New solder cup

option shown.

S

Rear Exit

SC - Solder Cup

Bifurcated

PCB Terminals

Bifurcated

PCB Terminals

PD3MS1

3-pin male,

PD3MRML2

3-pin male, right

PD3FRL1

3-contact female,

PD3FRA1

3-contact female,

straight (rear exit)

PC terminals.

Front mount.

angle (bottom exit)

long screw machine

terminals. Panel

mount holes not

countersunk.

right-angle (left exit)

PC/solder terminals.

Ground lug. Front

panel mount.

right-angle (bottom

exit) PC/solder

terminals. Ground

lug. Front panel

mount.

RECOMMENDED PC BOARD

LAYOUT (Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Numbers PD3FS1, 2, and 3 (Typical)

Numbers PD3FRA1, 2, and 3; PD3FRL1, 2, and 3;

PD3FRR1, 2 and 3; PD3FRU1, 2 and 3 (Typical)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{PD SERIES}21

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PD SERIES (continued)

RECOMMENDED PC

BOARD LAYOUT

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Numbers PD3FRMS1, 2, and 3 (Typical)

Numbers PD3FRML1, 2, and 3 (Typical)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Numbers PD3MRML1, 2, and 3 (Typical)

Numbers PD3MRMS1, 2, and 3 (Typical)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Numbers PD3MS1, 2, and 3 (Typical)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

22 ^Q-G^®^RECEPTACLES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G ^®RECEPTACLES

SERIES Y(*)F,Y(3)FPC,Y(*)FD,Y(3)FDPC AND Y(3)MPC RECEPTACLES

Y3MPC

Y3FPC

Series Y(*)MPC. Male receptacle for panel or chassis

mounting escutcheon. PC terminals and standoffs. Rear of

panel mount in .750 inch diameter hole. Maximum panel

thickness: 25 inches (6.35 mm); .156 inches (3.96 mm) ifYEM

escutcheon is used.

RECEPTACLES

Part Numbers

Female

Insert

Contacts

Part Number Insert

Latchlock^†

Detent^†

Male^†

Pins

Y3F

Y3FD

3

Y3MPC

3

Series Y(*)FPC. Female receptacle for panel or chassis

mounting. PC Terminal and standoffs. Rear of panel mount in

.875 inch (22.22 mm) diameter hole.

†Suffix letters “PC” indicate PC terminals; all others have solder lugs.

ESCUTCHEONS

Series Y(*)F. Female receptacle for panel or chassis mounting.

Rear of panel mount in .875 inch (22.22 mm) diameter hole.

Part Number

Color

Part Number

Color

◊YEF01

◊YEF02

◊YEF03

Red

Black

Green

◊YEF04

◊YEF05

◊YEF08

Blue

White

Yellow

Series Y(*)FD, Y(*)FDPC. Female receptacles. Same as Y(*)F

and Y(*)FPC, respectively, except with FAS-DISCONNECT

detent.

SPECIFYING NOTE: YEM02 escutcheon can be ordered on special order; contact

Switchcraft.

Series YEF Escutcheons. Trim escutcheons provide

distinctive panel appearance and can also color code

connections. Available in black (standard), red, green, white,

and yellow. Other colors possible on special order where

production quantities warrant.

ASSEMBLY/MOUNTING

AII receptacles are rear-of-panel mount (units with PC

terminals also mount/terminate to PC board). Flange fastens

to chassis/panel with two #4-40 machine screws (not supplied).

Use of escutcheons is optional.

Install latch release lever (Series Y(*)F and Y(*)FPC) after

receptacle is fastened to chassis/panel. Insert lever in slot from

front and press inward until it locks (snaps) into place. To

remove lever, depress rear of lever (with screwdriver) through

opening at top rear of housing and pull lever straight out.

YEF02

ESCUTCHEONS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

F SERIES RECEPTACLES

23

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

F SERIES RECEPTACLES

F3MSTF

F3FRAF

F3FSTF

Switchcraft now offers the F Series. Available in male and

female, the receptacles can be mounted from the rear of the

panel. Features include an all metal housing with a ferrite

disk for added EMI/RMI shielding. Both male and female

connectors can be mounted vertical or horizontal to the PC

board. All connectors have a PC-board retention feature to

hold the connectors firmly to the PC board prior to soldering.

See the chart below for part numbers.

SPECIFICATIONS:

ELECTRICAL

Contact Resistance: 50 milliohms maximum, per pole.

Current Rating: 15A

Insulation Resistance: 1,000 MΩ

Dielectric Resistance: 1,000 V rms

Capacitance: 2 to 4 pF

F SERIES FEATURES

• Replaces Cannon XLM-Series

• 3-pin contact; male and female types

• Both male and female fit in same panel cutout

• Locking receptacles

MECHANICAL

Insertion/Withdrawal Forces: 7 pounds maximum/nominal

Insertion: 7 pounds maximum withdrawal.

Life: 10,000 operations (minimum).

ENVIRONMENTAL

• Silver-plated contacts

Thermal Range: -55° C to +85° C

Thermal Shock: Meets MIL-STD-202F, method 107D

Salt Spray: Meets MIL-STD-202F, method 101D (for 16 hrs.)

• Rugged metal shells; satin nickel finishes

• Through-the-shell ground connection and all-metal shells

for greater shielding effectiveness

• Compatible with Switchcraft Q-G^®, QGP and other

connectors with similar configurations

• Added EMI/RFI ferrite shield

MATERIAL

Shells: Die-cast; satin-nickel plated

Inserts: Glass-filled thermoplastic.

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, silver-plated.

Latch Release: Steel, nickel-plated.

Part

Number

Terminals

Contacts

Housing

Type

F3MSTF

M

Straight

TERMINALS

F3FSTF

F3MRAF

F3FRAF

F

M

F

Two terminations are available on F-Series receptacles:

1. Straight PC-terminals – direct termination to PC-board.

Housing mounts to panel.

2. Right Angle PC terminals – direct termination to

PC-board at right angle. Housing mounts to panel.

Silver

Satin Nickel

Right Angle

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

24 ^{F SERIES RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

F SERIES RECEPTACLES (continued)

F3MSTF

F3FSTF

F3MRAF

F3FRAF

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

Q-G^®ADAPTERS, ACCESSORIES

25

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®ADAPTERS, ACCESSORIES

Male and female Q-G ^®inserts with 3-7 pins/contacts, fit

appropriate plug and receptacle housings. Female

inserts available with standard latchlock or

FAS-DISCONNECT detent mating, and with solder or

PC terminals. Intended for replacement, or building into

equipment such as microphones and transducers.

Q-G^®CONNECTOR INSERTS

Insert

Pins/

Contacts

Standard

Latchlock

FAS-*

DISCONNECT

Male

Inserts

—

◊ QG3FDPC

QG3FD

QG4FD

QG5FD

QG6FD

—

3

4

5

6

7

QG3F

QG4F

QG5F

QG6F

QG7F

QG3M

QG4M

QG5M

QG6M

QG7M

QG7FD

*Suffix letters “PC” indicate PC terminals; all others (except “S”)

have solder lugs.

**Suffix letter “S” indicates locking PC terminal and plastic housing.

◊ Special order only. Contact Switchcraft.

Note: Add suffix “BAU” for black insert with gold-plated contacts.

Right-angle male panel receptacle.

Mounts with two, #5-40 machine screws.

W(*)M RECEPTACLE

Part Number

Insert Pins

W3M

W4M

3

4

3-pin plug shorts out unused hi-Z microphone inputs or other sensitive

circuits (shorting jumper installed between pins 2 and 3). 6" (152.4 mm)

chain fastened to end pin to prevent plug loss. Switchcraft can install

special wiring for a nominal extra charge.

SHORTING PLUG

Part Number

Insert Pins

◊N3MS

3

◊ Available on special order only; contact

Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

26 ^Q-G^®^{WALL PLATE RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®WALL PLATE RECEPTACLES

G(*)M WALL PLATE RECEPTACLE

J(*)F WALL PLATE RECEPTACLE

Wall plate with one B3M or B4M male

receptacle mounted (in “D”-shaped

hole to prevent turning) on standard

single electrical outlet box. Cover

mounting screws included.

Wall plate with one, D3F or D4F female

receptacle. Mounts on standard single

electrical outlet box. Cover mounting

screws included.

Part

Number

Insert

Pins

Part

Number

Insert

Pins

Finish

◊G3MS

◊J3FS

3

Stainless

Steel

Stainless

Steel

◊G4MS

4

◊J4MS

4

◊ Special order only. Contact Switchcraft.

H(*)M WALL PLATE RECEPTACLE

K(*)F WALL PLATE RECEPTACLE

Wall plate with two, B3M

or B4M male receptacles

mounted (in “D”-shaped

holes to prevent turning)

Wall plate with two, D3F or

D4F female receptacles.

Mounts on standard single

electrical outlet box. Cover

mounting screws included.

on

standard

single

electrical outlet box. Cover

mounting screws included.

Part

Number

Insert

Pins

Part

Number

Insert

Pins

Finish

◊H3MS

K3FS

3

Stainless

Steel

Stainless

Steel

◊H4MS

4

◊K4FS

4

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^Q-G^®^{CONNECTOR-ADAPTERS}27

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTOR-ADAPTERS

321

322

323

324

383A

384A

Switchcraft Q-G ^®Connector-Adapters, designed to solve

common interconnection problems, are ideally suited to the

interconnection of microphones, mixers, amplifiers, public

address and sound reinforcement equipment, broadcast

equipment, and any other component that does not have an

appropriate mating connector. All are completely shielded,

and incorporate the high quality and outstanding design features

of the Switchcraft line of Q-G Audio Connectors, including:

Phono Jack Pin Receptacle: Brass, silver-plated,

copper alloy.

Phono Jack Insulation: Thermoplastic.

321. Phono plug to 3-contact female audio-connector

(Switchcraft^®A3F).

322. Phono jack to 3-contact female audio-connector

(Switchcraft^®A3F).

323. Phono plug to 3-pin male audio-connector

(Switchcraft A3M).

1. Separate ground terminal.

2. Ground Contactors.

3. Captive Design^®Insert Screw

4. High impact Thermoplastic Insulation.

324. Phono jack to 3-pin male audio-connector

(Switchcraft^®A3M).

383A. Three-contact female audio-connector

(Switchcraft^®A3F) to standard .250" (6.35 mm)

diameter 3-conductor extension phone jack.

MATERIAL SPECIFICATIONS

PHONE JACK AND PLUG TERMINATIONS

Shell: Copper alloy, nickel-plated.

Insulation: Paper-base phenolic.

Plug Tip and Sleeve: Copper alloy, nickel-plated.

Phone Pin and Plug Housing: Copper alloy, nickel-plated.

Phono Plug Insulation: Rigid plastic.

Phono Jack Housing: Steel, copper alloy-plated,

tarnish-resistant.

384A. Three-pin male audio connector

(Switchcraft^®A3M) to standard .250" (6.35 mm)

diameter 3-conductor extension phone jack.

321

322

323

324

383A

384A

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

28 ^QG^®^{AUDIO CONNECTOR ADAPTERS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®AUDIO CONNECTOR-ADAPTERS

386A: Three-contact female audio connector (Switchcraft^®A3F)

to standard .250" (6.35 mm) diameter 3-conductor phone plug.

387A: Three-pin male audio connector (Switchcraft^®A3M) to

standard .250" (6.35 mm) diameter 3-conductor phone plug.

389: Three-contact female audio connector (Switchcraft^®A3F)

at both ends. Pre-wired contacts: 1 to 1, 2 to 2, 3 to 3.

390: Three-pin male audio connector (Switchcraft^®A3M)

at both ends. Prewired pins: 1 to 1, 2 to 2, 3 to 3.

386A

389

387A

390

S*FM AUDIO CONNECTOR-ADAPTER AUDIO “Y” ADAPTERS

A

C

B

Male-female connector conversion has male Q-G^®insert at one

end and corresponding female Q-G^®insert at the other. Designed

to accept internally connected transformer, attenuator, or other

circuitry inline with microphone input. Includes 1.50" (38.1 mm)

long x .594" (15.08 mm) diameter of usable internal volume.

Series 391Q Y-Adapters can combine or split typical audio

signals using a combination of Switchcraft Q-G^®A3F and A3M

cord plugs. Outputs of two microphones can conveniently be

connected in parallel and connected to a single input using a

391Q23 Y-Adapter. Cabling is 2-conductor shielded, 2-foot long

gray jacket with molded Y-junction at center point. Mates with

Switchcraft Q-G^®and QGP^®connectors.

Q-G^®Cord Plug Part Numbers

Part Number

Plug A

Plug B

Plug C

◊391Q13

◊391Q23

◊391Q33

◊391Q43

◊391Q53

◊391Q63

A3F

A3M

A3F

A3M

A3F

A3M

Female

Insert

Male

Insert

Pins/Contacts

Part Number

◊S3FM

◊S4FM

◊S5FM

QG3F

QG4F

QG5F

QG3M

QG4M

QG5M

3

4

5

◊ Available on special order only; contact Switchcraft for price and delivery.

Note: “Y” adapters may use either series A(*) or AA(*) plugs.

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{DMX ADAPTER}29

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DMX ADAPTER

Switchcraft introduces our new series of DMX adapters. The DMX

adapters were developed for use in the theater lighting industry. The

adapters allow the end user to use standard 3 pin XLR cable

assemblies in connecting DMX equipment.The adapters are available

in 3 pin male to 5 pin female and 5 pin male to 3 pin female. All are

wired “straight through.”

S3F5M

FEATURES AND BENEFITS

• Nickel-plated die-cast housing increases durability

• Pre-wired for immediate use

• Available in two configurations

APPLICATIONS

• Theater lighting

• Any DMX application

S5F3M

SPECIFICATIONS

Shell: Die-cast zinc, satin nickel finish

Insert Insulation: Molded thermoplastic

Socket contacts: Silver-plated copper

alloy, tarnish-resistant

Pin contacts: Sliver-plated copper

alloy, tarnish-resistant

ORDERING INFORMATION

S3F5M

3 pin female to 5 pin male

S5F3M

5 pin female to 3 pin male

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

30 ^Q-G^®^{CONNECTOR-ADAPTER RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®CONNECTOR-ADAPTER RECEPTACLES

Adapter receptacles mount directly to microphones or

similar equipment to provide highly reliable 3-, 4- and 5-pin

Switchcraft Q-G^®connections. Adapter shell and coupling nut

are brass, satin nickel finish.

SERIES M(*)M

Male with shell having 13/16-27 external threads to engage

equipment with internally threaded body. Terminals extend out

rear (threaded end) to permit wiring without disassembly.

SERIES L(*)MN

Male has plain cylindrical shell with knurled, internally

threaded collar to engage external 13/16-27 threads on

microphone body.

Part Numbers

Series

L(*)MN

Series

M(*)M

Insert

Pins

◊L3MN

◊L4MN

◊L5MN

◊M3M

◊M4M

◊M5M

3

4

5

Z MATCHING TRANSFORMERS

SPECIFYING FEATURES

• Plug-in impedance changes

• Fully wired

• Connections bi-directional (low to high impedance or

high to low impedance)

• Rugged die-cast housings

9144

9244

• Mu-metal shielding

MATERIAL SPECIFICATIONS

Shell: Die-cast zinc shell, nickel-plated with black

non-glare metalized foil label.

Shielding: Mu-metal.

Dimensions: Diameter–.75" (19.05 mm) nominal Length –

3" (76.2 mm) nominal (Part Number 92XX); 3.375" (85.73 mm)

nominal (Part Number 91XX).

ELECTRICAL SPECIFICATIONS

Frequency Response: Flat–20 Hz to 20 kHz ± 2 decibels

Impedance: High–50 K ohms (nominal); Low–150 ohms (nominal)

Voltage Step Ratio (Input Power Level); Low to High:

+29 decibels (typical); high to low: -29 decibels (typical)

Series 9000 Line Matching Transformers offer low-loss

interconnections between high and low impedance equipment.

Exclusive mu-metal shielding protects against spurious

electrostatic and RF fields. Units are bi-directional and can be

used as follows:

• Low to hi, such as professional low impedance microphones

to high impedance amplifiers. Stereos, cassette recorders,

public address systems, and mixers.

Part

Number

Switchcraft Connector

◊9115

Lo Z: 3-contact Q-G^®

female, A3F

Hi Z: 2-conductor phone plug,

1/4" finger diameter, right

angle handle, 4" extension

(shielded) cable

◊9129

Lo Z: 3-contact Q-G^®

female, A3F

Hi Z: 2-conductor phono plug, right

angle handle, 4 inch extension

(shielded) cable

• Hi to low, such as high impedance microphones or electronic

instruments to low impedance amplifiers or mixers.

9144

9244

Lo Z: 3-contact Q-G^®

female, A3F

Lo Z: 3-pin Q-G^®

male, A3M

Hi Z: 2-conductor phone plug,

1⁄4" finger diameter

Designed to mate with Switchcraft Q-G^®connectors.

Available with various terminations; see chart.

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{TINI Q-G}^®^{MINIATURE CONNECTORS}31

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G^®MINIATURE CONNECTORS

Series TA(*)F, TA(*)FB, TA(*)FL and TA(*)FLB –

Straight female cord plug

Series TA(*)M, TA(*)MB, TA(*)ML and TA(*)MLB –

Straight male cord plug

Series TB(*)M and TB(*)MB – Chassis/panel mount

male receptacle

Series TY(*)F and TY(*)FPC – Chassis/panel, female

receptacle, choice of solder lugs or P.C. terminations.

Series TLP – Looping Plugs

Series TBA(* *) – Audio Adapters

Series TRA(*)M – PC Mount Male Receptacles

Series TRG(*) – Reverse Gender Panel Mount, Cord Mount

TA3F

TA3M

FLEX RELIEF – Protects by minimizing cable bending stress

at point of cable entry. Maximum recommended cable diameter

is .115" (2.92 mm) when flex relief is used. By omitting

flex relief (Series T(*)FL and T(*)ML only), cable up to .170"

(4.32 mm) diameter can be used.

DESIGN FEATURES

STYLE – Streamlined, miniaturized with nickel-plated metal

and contrasting black plastic parts. Designed for light weight

and unobtrusiveness. Also available in conductive black

chrome finish.

ASSEMBLY – Connector parts are mechanically keyed for

simple assembly.

POLARIZATION – Mating male and female connectors are

also mechanically keyed (latch and groove) so that it is impossible

to mate them incorrectly.

CONSTRUCTION – Metal parts are rugged die-cast or

precision machined with nickel-plating; plastic parts are molded

of high dimensional-stability thermoplastic. Advanced design

assures minimum weight consistent with strength and

durability of cord plug housings of .413" (10.5 mm) diameter

Weight: Series TA(*)F plug = .25 ounce (7 g); Series TA(*)M =

.3 ounce (8.5 g).

“SCOOP-PROOF” FEATURE – Fully recessed pins on male

plugs and receptacles cannot be “scooped”, bent or damaged

by accidental mismating with mating connector.

COLOR ESCUTCHEONS – Attractive color escutcheons,

Series TYEF, are recommended for use with Series TY(*)F and

TY(*)FPC receptacles (when rear mounted) for attractive panel

trim, as well as color coding one or more connectors. Colors

are: red, black, gray, green, blue, white and yellow.

INSERTS – Precision molded of thermoplastic for high

mechanical and dielectric strength. Contacts and terminals

are precision formed and plated for intimate contact and low

resistance connections.Terminal numbers are molded on rear

of male insert and on face of female insert for easy

identification (except 6-pin male insert). Inserts can be supplied

for OEM installation in microphones and instrumentation for

optimum connecting reliability. For cord plugs, inserts can also

be supplied for replacements.

CUSTOM Tini Q-G^®CABLE ASSEMBLIES – On special

order where production quantities warrant, Switchcraft can

supply assembled and tested Tini Q-G^®cables.

MOUNTING

Panel/Chassis Thickness:

Series TB(*)M: .25" (6.35 mm) maximum

Series TY(*)F:

Front—.375" (9.5 mm) maximum

Rear—.093" (2.3 mm) maximum

Series TY(*)FPC:

LATCHLOCK – Positive latch system assures high integrity,

vibration-resistant mating and transfer of shielding connection

between housing, combined with simple, easy fingertip release.

STRAIN RELIEF – Rugged internal clamp holds cable tightly,

while making a secure, low resistance connection between

cable shield and housing.

Front—.312" (7.9 mm) maximum

Rear—.093" (2.3 mm) maximum

TINI Q-G ^®AUDIO ADAPTERS

Series TA Tini Q-G ^®audio adapters have been designed to

adapt Tini Q-G ^®connections to standard audio connectors.

Tini Q-G ^®adapters convert to Switchcraft Q-G ^®and QGP

connectors and similar full-size connectors.

Tini Q-G ^®End

Mates With

Q-G ^®End

Mates With

Part Number

◊TA01

◊TA02

◊TA03

◊TA04

◊TA05

◊TA06

TA3F

TA4F

TA5F

TA3F

TA4F

TA5F

A3M

A4M

A5M

A3F

A4F

A5F

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

32 ^{TINI Q-G}^®^{MINIATURE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G^®MINIATURE CONNECTORS (continued)

SPECIFICATIONS: (3 – 5 CORD MOUNT ONLY)

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

ELECTRICAL

Contact Resistance: .010 ohms maximum after life

SPECIFICATIONS:

(and after salt spray).

Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC

on 5 circuit) based on 30°C maximum.

Insulation Resistance: 510,000 megohms minimum @ 500 V

DC (initial); 10,000 megohms minimum (after humidity test).

Dielectric Strength: 1,000 V (rms).

(6 – 8 Cord Mount and all Receptacles and Adapters)

ELECTRICAL

Contact Resistance: .010 ohm maximum after life.

Current Rating (Carry only): 1.5A, 125 VAC, based

on 30° maximum

Insulation Resistance: 510,000 MΩ minimum

@ 500 VDC (initial).

Dielectric Strength: 250 V rms.

MECHANICAL

Life: 5,000 operations minimum

Insertion/Withdrawal Forces (after life): 6.1 lb./2.77 kg after

life, insertion; 5.6 lb/2.54 kg, withdrawal.

Solderability Standard: Meets EIA RS-186-9E.

Mechanical Shock: Meets MIL-STD-202, method 213B.

Vibration: Meets MIL-STD-202, method 201A.

Wire Size: #22 wire gauge solid; #24 wire gauge stranded.

MECHANICAL

Life: 2,000 operations

Insertion/Withdrawal Forces (after life): –13 pound

insertion; –13 pound maximum withdrawal

Solderability Standard: Meets EIA RS-186-9E.

Wire Size: 28 wire gauge stranded.

ENVIRONMENTAL

Thermal Range: -55°C to + 85°C.

Humidity: Meets MIL-STD-202, method 106D.

Thermal Shock: Meets MIL-STD-202, method 107D.

Salt Spray: Meets MlL-STD-202, method 101.

MATERIAL

Housings, Plugs and Male Receptacles: Copper alloy,

nickel-plated.

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, electrotinned.

Flex Relief and Latch Button: Molded thermoplastic.

Ground Terminal: Copper alloy, electrotinned.

Inserts and Insulating Spacer: Molded high strength

thermoplastic, UL 94 V-0.

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

Ferrite: 43 material, shielded head.

MATERIAL

Housing, Plugs and Male Receptacles: Copper alloy,

nickel-plated. Female Receptacle–Die-cast zinc, nickel-plated.

Black Tini Q-G^®Housing: Copper alloy, black chrome-plated.

Pin and Socket Contacts: Copper alloy, silver-plated.

Flex Relief: Molded black thermoplastic elastomer.

Latch Button: Molded black thermoplastic.

Release Lever and Mounting Washer: Steel, nickel-plated.

Standoff/Ground Terminal and Cable Clamp:

Steel, electrotinned.

Frame: Molded thermoplastic, UL 94 V-0.

Inserts and Insulating Spacer: Molded, high strength

thermoplastic.

STRAIGHT FEMALE CORD PLUG

STRAIGHT MALE CORD PLUG

Part

Insert

Part

Number

Insert

Part

Number

Insert

Pins

Part

Number

Insert

Pins

Number Contacts

Contacts²

TA3F

3

4

TA4FLB*

TA5F

4

5

6

7

8

TA3M

3

4

◊TA5M

5

6

7

TA3FB*

TA3FL¹

TA3FLB*

TA4F

TA3MB*

TA3ML

TA4M

◊TA5ML

TA5MLB*

TA6ML¹

TA7ML

TA8ML

TA5FL¹

TA5FLB*

TA6FL¹

TA7FL

TA8FL

TA4MB*

TA4ML¹

TA4FB*

TA4FL¹

1. Add AU to Part Number for Gold Contacts.

* B indicates black housing

1 Flex relief omitted for larger diameter cable

2. Add AU to Part Number for Gold Contacts.

* B indicates black housing

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

TINI Q-G^®MINIATURE CONNECTORS

33

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G^®MINIATURE CONNECTORS (continued)

TB(*)M AND TB(*)MB RECEPTACLE

TLP(*) LOOPING PLUG

Looping plug is designed for

circuit testing. Other inserts

and wiring patterns are

possible; contact Switchcraft.

Male receptacle for

chassis/panel mounting.

Specially designed

flange permits close

(front) mount on crowded

panels. Mounting

hardware supplied.

Available with PC

terminals. Call factory

for details.

Part

Insert Part

Insert

STRAIGHT FEMALE LOOPING PLUG

Number Pins Number Pins

TB3M

TB3MB*

TB4M

TB4MB*

TB5M

3

4

5

TB5MB*

TB6M

TB7M

5

6

7

8

Part Number

Insert Contacts

◊TLP4

◊TLP6

4

6

TB8M

* B indicates black housing

◊ Available on special order only; contact Switchcraft for price and delivery.

* Number of insert contacts or pins must be specified to complete Part Number.

REVERSE GENDER TQG SERIES

Same specifications as the original

TQG Series, however, the latch is on

the male cord mount. Available in 4

pin only.

TRG4M

TRGS4F

Part

Number

Insert

Pins

Description

TRGS4F

TRG4M

4

Panel mount female

Cord mount male w/latch

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

34 ^{TINI Q-G}^®^{MINIATURE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G^®MINIATURE CONNECTORS (continued)

TRA6M

TRA3M

TRA(*)M PC MOUNT MALE RECEPTACLE

The TRA(*)M low profile male receptacles mount in

minimum space from the rear of panel or chassis, and

feature space-saving right-angle construction and PC type

terminals. The TRA3M is a cost-effective choice for audio

equipment, medical instrumentation, computer equipment and

test/measurement applications. Also available with 6 pins.

Part Number

Insert Pins

TRA3M

TRA6M

TRA6MF*

3

6

*F designates ferrite shielding.

TRAPC3MS

TRASM3M

TRASM*M, TRAPC*M SERIES

Switchcraft introduces an expansion of its popular TQG Series of

connectors.TheTRASM*M andTRAPC*M offers low profile, right

angle PC board mount connectors. The TRASM*M versions are

true surface mount connectors, while the TRAPC*M versions are

through-hole PC mount connectors. Both versions are available

in 3-8 pins. All plastic connectors, the TRASM*M and TRAPC*M

series have flats on the top of the connectors to facilitate pick and

place assembly. As an added option, a non-threaded bushing

version is also available.

ELECTRICAL

Current Rating: 5A for 3-5 pins, 1.5A for 6-8

Contact Resistance: 10 m Ohm max

Insulation Resistance: 100 m Ohm min

Dielectric Withstanding Voltage: 250VAC

Mechanical Life: 2,000 cycles

FEATURES AND BENEFITS

• Low profile, compact design reduces PC board space

• Mates with TQG female cord plugs

• Rated at 5A for 3-6 pins, 3A for 7 and 8 pin versions

MARKETS

• Wireless microphone systems

• Medical Instrumentation

• Test Instrumentation

TINI Q-G^®CONNECTORS ORDERING INFORMATION

T

RA

M

___ ___ ___ ___ ___ ___ ___ ___ ___

Tini QG

Reel Size

15" reel, standard tape

and reel size

SPECIFICATIONS

MATERIALS

Right Angle

Housing: Thermoplastic

Contacts: Brass, tin-plated

Nut and Washer: Brass, nickel-plated

Termination

Optional Packaging

TR - Tape and Reel

(std packaging - bulk)

PC - Thru Hole

SM - Surface Mount

Contacts Configuration

Optional Modifier

1 - no thread

3 - 8

Contact Gender

Optional Modifier

S-small Profile (available

in configurations 3&4 only)

M - Male

See next pages for drawings

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{TWIN Q-G}^®^{MINIATURE CONNECTORS}35

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G ^®MINIATURE CONNECTORS (continued)

TRASM*M, TRAPC*M SERIES

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

36 TINI Q-G^®MINIATURE CONNECTORS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G ^®MINIATURE CONNECTORS (continued)

TRASM*M, TRAPC*M SERIES

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

TINI Q-G^®MINIATURE CONNECTORS

37

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TINI Q-G ^®MINIATURE CONNECTORS (continued)

TY(*)F AND TY(*)FPC RECEPTACLES

MOUNTING HOLE DETAIL

SERIES TY(*)F, TY(*)FPC

COMBINED P.C./PANEL

MOUNTING

FRONT

REAR

MOUNTING

Female receptacle mounts in minimum

space from front or rear panel or chassis.

Terminals are solder lugs, Series

TY(*)F, or P.C., Series TY(*)FPC. All

receptacles have separate ground lug.

RECOMMENDED P.C. BOARD LAYOUT

Part

Number

Insert

Contacts

Part

Number

Insert

Contacts

TY3F

3

4

TY5F

TY5FPC

5

TY3FPC

TY4F

TY4FPC

TQG(*)F AND TQG(*)M

TBA(**) AUDIO ADAPTER

TYEF ESCUTCHEONS

CONNECTOR INSERTS

Male and female inserts with 3, 4, 5

or 6 pins/ contacts. For replacement

(cord plugs only) or build-into

equipment, such as microphones,

transducers and instruments.

Trim escutcheons in seven colors for

use with Series TY(*)F and TY(*)FPC

receptacles, are recommended for rear

mount receptacles. Escutcheons must

be ordered separately.

Male Inserts

3–6 pin male-to-male adapter is designed

for through-bulkhead or cable expansion

usage. Adapter is prewired pin 1 to pin 1,

pin 2 to pin 2, etc. Mounting nuts are

supplied for each threaded end. Panel

hole diameter required is .45"; maximum

panel thickness is .25" (6.35 mm).

Part Number

Insert Pins

◊TQG3M

◊TQG4M

◊TQG5M

◊TQG6M

3

4

5

6

Part Number

Color

◊TYEF01

◊TYEF02

◊TYEF03

◊TYEF04

◊TYEF05

◊TYEF08

◊TYEF11

Red

Black

Green

Blue

Female Inserts

Part Number

Insert Contacts

Part Number

Insert Pins

◊TQG3F

◊TQG4F

◊TQG5F

◊TQG6F

3

4

5

6

◊TBA03

◊TBA04

◊TBA05

◊TBA06

3

4

5

6

White

Yellow

Gray

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

38 ^{HIGH POWER CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

HPC SERIES PANEL MOUNTS AND CORD PLUGS

HPCPR41F

HPCP41F

HPCP410RA

HPCI4F

HPCC4F

HPCC4RAF

• Right angle or straight PC board terminals on panel mounts

• Built in gasket gives all HPC connectors IP 25

environmental ratings

• All HPC Series meet IEC 529 and IEC 1010-1 safety ratings

• Cord plug versions offer “push to lock” design,

no 1/4" turn to engage

HPC SERIES

Switchcraft recently introduced a complete line of panel mount

speaker connectors that are completely compatible with the

Neutrik^®Speakon^®4 pole series. We are now introducing a

complete line of cable mounts as well. The complete HPC

Series offers both panel mount and cord mount connectors.

The HPC panel mounts have been updated with new

silver-plated contact materials that boost the contact ratings to

30A per UL 1977 on PC mount versions, 50A per UL 1977 on

Faston^®versions. They are still available with either 0.100"

depth flanges or 0.200" depth flanges. The 0.200" depth flange

allows for rear mounting of the HPC Series, and proper mating

of all cord plugs. The panel mount versions are available with

either 0.187" or 0.250" Faston^®terminals, and either straight or

right angle PC mount terminals. The right angle PC mount

version also has, as an option, a mounting post which allows

the connector to snap onto the PC board for wave soldering.

The HPC cord plugs are available in either straight, right

angle, or as an in-line. The in-line version mates with either the

straight or right angle cord plug, allowing the end user to extend

cable runs. All cord plugs are compatible with Speakon^®panel

mounts. The in-line mates with our HPC cord plugs, as well as

Speakon^®cord plugs. The unique feature of the HPC series

cord plugs are the “push to lock” feature, similar to the

connection of an XLR connector. The HPC cord plugs, when

mated to either HPC panel mounts or Speakon^®panel mounts

do not require a 1/4" turn to engage. Simply push the connector

in until it locks. To disengage, push forward on the latch lever

and pull the connector out. This feature eliminates the need to

remember to turn the connector to make contact. All HPC cord

plugs utilize 0.250" Faston^®terminals, which allow for easy

assembly, and make it easy to change cord plugs. To change

from a straight cord plug to an in-line cord plug, back off the

strain relief nut, twist off the handle, disconnect the Faston^®

terminals, fasten the new cord connector, twist on the handle

and the strain relief. Barbs on the handle keep the handle from

vibrating loose from the front shell.

• Cord plug versions accept 10 AWG wire,

0.560" cable OD max

APPLICATIONS

• Loudspeakers

• Power audio amplifiers

SPECIFICATIONS

Materials

Housings: Thermoplastic UL 94V-O rated

Seal Rings: Thermoplastic rubber

Contacts: Silver-plated over copper alloy

ELECTRICAL

PC Terminals Current Rating: 30A per UL 1977

Faston^®Terminals Current Rating: 50A RMS w/10AWG

wire, normal ambient, per UL 1977

Voltage Rating: 1,500 AC RMS, Per Mil-Std 202 Method 301

Insulation Resistance: > 2T Ohms

Contact Resistance: 1m Ohm, 1.5mOhm after 1,000

insertion/withdrawals

MECHANICAL

Shock: Mil-Std 202, Method 213B Cond.K

Vibration: Mil-Std 202, Method 201A

Life: 1,000 insertion/withdrawals

Cable Range: 0.560” OD max

ENVIRONMENTAL

Salt Spray: Mil-Std 202, Method 101D Cond. B

Thermal Shock: Mil-Std 202, Method 107G

Temperature Limits: -55 C to +85 C

Moisture Resistance: Mil-Std 202, Method 106E

Life@Ambient Temperature: Mil-Std 202, Method 108A

Touch Proof: IEC 65 and 1010-1

Both HPC panel mounts and cord plugs incorporate a built-in

gasket, which allows them to meet IP 25 harsh environment

ratings, as well as IEC 529 and IEC 1010-1 safety ratings.

FEATURES AND BENEFITS

Weather Tightness: IEC 529, IP 25

• Completely compatible with Neutrik^®Speakon^®

4 pole connectors

CORD MOUNT ORDERING INFORMATION

• 30A rating per UL 1977 on PC mount versions

• 50A rating per UL 1977 on Faston^®versions

• Panel mounts have two different Faston^®terminal sizes,

0.187" and 0.250"

• Panel mounts offered with two different flange depths,

0.100" and 0.200"

Part Number

HPCC4F

HPCI4F

Description

Straight Cord Plug

Inline Cord Plug

Right Angle Cord Plug

HPCC4RAF

• 0.200" depth flange offers easy rear mounting

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

HIGH POWER CONNECTORS

39

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PANEL MOUNT ORDERING INFORMATION

H_P__C _P__ ___ __4_ ___ ___ ___

Termination

F - .250" Faston^®; F1 - .187" Faston^®; PC - Printed Circuit

RA - Right angle PC; RAP - Right angle PC with mounting post

Series

High Power Connector

Type of Connector

P - Panel

Mounting Holes

Blank - Rectangle: .140” dia. w/Countersink Hole

Blank - Round: .152” dia. w/Countersink Hole

0 - Rec./ Round: .093” Dia. Hole

Type of Housing

Blank - rectangle

R - round

Recessed Flange (Dim. “A”)

1 - .100”; 2 - .200”

Number of Contacts

4

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

40 ^{HIGH POWER CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

HPCP*4

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^EN3^™^{MINI WEATHERTIGHT CONNECTOR SERIES}41

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EN3^™MINI WEATHERTIGHT CONNECTOR SERIES

Cord

Connector

GENERAL FEATURES AND BENEFITS

• Great all-purpose connector “weather” or not sealing feature is required.

• Superior leakage protection. Contact area is double-sealed for

excellent moisture and chemical resistance when mated to

Switchcraft’s connectors.

• Integral O-ring and gasket. O-ring is molded onto cord housing

assembly and gasket is molded onto panel housing assembly

to prevent leakage and eliminate need for additional O-rings

and gaskets.

• Reduced part count for reduced labor to assemble.

• No Grommets. Cable clamp assembly features living hinges,

which snap easily onto and support the cable.

• Thermoplastic rubber body simulates closed entry contact

system to prevent probe damage or accidental loss of

spring retention due to misaligned or bent pins.

Panel

Connector

ENVIRONMENTAL

• Abrasion-resistant thermoplastic boot provides strain relief

and accepts cable diameter .195" to .265".

Temperature Limits: -40°C to +65°C (non-operating)

Moisture Resistance: Mil-Std 202 Method 106F

Insulation Resistance: Mil-Std 202 Method 302

condition B

Thermal Shock: Mil-Std 202 Method 107G

Salt Spray: Mil-Std 202 Method 101D condition B

• Housing rated UL 94V-O against flammability.

• Panel connector shell features a positioning keyway to prevent

misalignments and a polarizing single “D” design for proper panel

mounting and to prevent rotational movement.

• 2-18 pins.

• Exceeds Coast Guard specifications for water tightness

(CFR 46 Part 110.20).

RATINGS

IP16/IP18

IP66/IP68

• Optional cap covers panel housing assembly when not in use.

• Exceeds enclosure rating IP16/IP18 when not mated or

covered and IP66/IP68 when mated or covered (IEC 529).

• Exceeds enclosure rating 6P at 1000V when mated or covered (NEMA 250).

CFR 46 Part 110.20

UL 94V-O

NEMA 250 (6P)

Patent 5,485,673 File 36049

MATING INSTRUCTIONS FOR A CORD CONNECTOR TO A

PANEL MOUNT OR IN-LINE CONNECTOR

EN3^™Weathertight Connector Current Carry Capability

(per UL 498 Standard)

First, align the notched keyway on both the panel mount or in-line and

cord connector.Then, push the cord connector onto the mating connector.

Grasp the coupling ring between the slots, push it toward the panel

mount connector and rotate it clockwise nearly one half a turn. Continue

rotating until you feel the coupling ring ride over the locking “bump”.This

is the locked position.The cord connector is not securely in place unless

this procedure is followed.

▲

50.00

▲

40.00

30.00

20.00

▲

APPLICATIONS

▲

Process Control

Communications

10.00 ^▲

▲

Marine Electronics

Medical Instrumentation

Geothermal Instrumentation

Transportation

▲

General Industrial Electronics

Harsh Environments

0.00

7

10

12

13

15

Current (Amps) - w/14 AWG Wire

MATERIALS

▲

Female 3 pin

Male 3 pin

Female 8 pin

Male 8 pin

▲

Cord and panel connector shells, contact locking disk,

and cable clamp assembly: Thermoplastic polymer glass

fiber, flame retardant

▲

Coupling ring: Nylon

Rear boot and connector shell interior: Thermoplastic rubber

Contacts: Copper base alloy gold-plated over nickel underplate

Dielectric Withstanding Voltage

Contact size/

Voltage

3000

number of contacts

SPECIFICATIONS

MECHANICAL

#20-2

Shock: Mil-Std 202 Method 213B, condition K

Vibration: Mil-Std 202 Method 201

Life: 600 insertion/withdrawal cycles (minimum)

#20-4

#20-3

#16-2

ELECTRICAL

2000

1000

Voltage Rating (sea level): Tested at 600 VRMS

Insulation Resistance: 100 megohms (minimum) at 77° F

Contact Resistance: 5 milliohms (maximum)

Current Rating: 3.0 Amps (#26 contact)– 9 through 18pin

6.5 Amps (#20 contact)– 7 and 8 pin

#20-7, #20-8

#16-3

#20-5, #20-6

7.5 Amps (#20 contact)– 2 through 6 pin

13.0 Amps (#16 contact)– 2 and 3 pin

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

42 ^EN3^™^{MINI WEATHERTIGHT CONNECTOR SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

CRIMP TOOLS

Part Number

EN3INS16

CRIMP CONTACT

INSERTION INSTRUCTIONS

Tool Description

Insertion/Extraction Tool for 16 AWG

Insertion/Extraction Tool for 20 AWG

Crimp Hand Tool

EN3INS20

EN3CR

EN3CRAUTO Pneumatic Crimp Tool

EN3POS16

EN3POS20

Positioner for 16 AWG contacts and pins

Positioner for 20 AWG contacts and pins

NOTE: A positioner must be used with the

EN3CR and EN3CRAUTO.

CRIMP CONTACT

EXTRACTION INSTRUCTIONS

Note: Solder and PC contacts are factory assembled

CORD CONNECTOR ASSEMBLY INSTRUCTIONS

STEP 1

Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp

housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be

inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable

clamp housing in the order and position shown.

IN-LINE

CONNECTOR

CABLE

BOOT

CABLE CLAMP

HOUSING

COUPLING

RING

CORD

CONNECTOR

BOOT

CABLE

CONTACT PINS

CABLE CLAMP

HOUSING

CONTACT PINS

O-RING

(MOLDED ONTO

CORD CONNECTOR)

STEP 2

Next, strip the cable .218" as shown and begin soldering conductors to pins, or insert contacts crimped on wire starting

with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor

in the center.

IN-LINE

CONNECTOR

CORD

CONNECTOR

3/8"

MAX.

SOLDER

3/8"

MAX.

7/32"

NOTCH (PIN #1

INDICATOR)

NOTCH (PIN #1

INDICATOR)

9/32"

STEP 3

CORD CONNECTOR

CABLE CLAMPS

IN-LINE CONNECTOR

CABLE CLAMPS

Push the cable clamp housing forward until it locks

into the connector body and snap the two clamps

into their compartments.

STEP 4

CORD CONNECTOR

IN-LINE CONNECTOR

Finally, push the boot all the way forward to seat tightly

onto the cable clamp housing.

Remember: Cord connectors will not mate with each other. For cord-to-cord connection,

your customer must order a cord connector plus an in-line connector.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^EN3^™^{MINI WEATHERTIGHT CONNECTOR SERIES}43

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EN3^™MINI WEATHERTIGHT CONNECTOR SERIES (continued)

2 – 8 PIN CORD CONNECTOR

9 – 18 PIN CORD CONNECTOR

EN3 Cord Connector Part Number Scheme

Series Style Pins/

Contacts

Gender

Contact

Size

Contact

Style

Contact

Plating

Packaging

EN3

C

2-18

F: Female

M: Male

16: #16

Leave blank

for #20

26: for 9-18

only

C: Crimp

P: PC

S: Staggered

Leave blank

for solder

AG: Silver

Leave blank

for gold

K: Kit

Leave blank

for bulk

packaging

Notes:

7 & 8 pin not available in cord male

9-18 pin available in either staggered solder or straight solder only

9-18 pin available only with # 26 terminals

AG: Silver plating special order

#16 contact available in 2 & 3 pins only

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

EN3^™MINI WEATHERTIGHT CONNECTOR SERIES

44

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EN3^™MINI WEATHERTIGHT CONNECTOR SERIES (continued)

2 – 8 PIN PANEL CONNECTOR

9 – 18 PIN PANEL CONNECTOR

EN3 Panel Connector Part Number Scheme

Series Style Pins/

Contacts

Gender

Contact

Size

Contact

Style

Contact

Plating

Packaging

EN3

P

2-18

F: Female

M: Male

16: #16

Leave blank

for #20

26: for 9-18

only

C: Crimp

P: PC

S: Staggered

Leave blank

for solder

AG: Silver

Leave blank

for gold

K: Kit

Leave blank

for bulk

packaging

Notes:

7 & 8 pin not available in panel female

9-18 pin available in either staggered solder or straight solder only

9-18 pin available only with # 26 terminals

AG: Silver plating special order

#16 contact available in 2 & 3 pins only

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^EN3^™^{MINI WEATHERTIGHT CONNECTOR SERIES}45

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EN3^™MINI WEATHERTIGHT CONNECTOR SERIES (continued)

2 – 8 PIN INLINE CONNECTOR

EN3 Inline Connector Part Number Scheme

Series Style Pins/

Contacts

Gender

Contact

Size

Contact

Style

Contact

Plating

Packaging

EN3

I

2-8

F: Female

M: Male

16: #16

Leave blank

for #20

C: Crimp

P: PC

Leave blank

for solder

AG: Silver

Leave blank

for gold

K: Kit

Leave blank

for bulk

packaging

Notes:

7 & 8 pin not available in inline female

#16 contact available in 2 & 3 pins only

AG: Silver plating special order

2 – 8 PIN OVERMOLDED CORD AND INLINE CONNECTOR

(See Cable Section for More Details.)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

46 ^{DIN CONNECTORS AND PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DIN CONNECTORS

MATERIAL

SPECIFICATIONS

Shell: Die-cast zinc alloy, nickel-plated.

Receptacle Mounting Flange: Steel.

Receptacle Body: Plastic.

Insert Material: Plastic.

Socket Contacts: Tin-plated.

Pin Contacts: Tin-plated.

ELECTRICAL

Contact Resistance: Cord Plugs and Receptacles;

.010 ohms, contact spring/pin .030 ohms, ground clip/shell.

Control and Switching Receptacles; .015 ohms, contact

spring/pin; .020 ohms, switch contacts.

Dielectric Withstanding Voltage:

Contact Rating:

500 V (rms)

5-pin; 3A, 34 V DC

Switching Contacts: Silver-plated.

Cable Relief Bushing: Soft plastic.

10⁵MΩ

Leakage Resistance:

Recommended Wire Size:

22 wire gauge maximum

PIN ARRANGEMENTS

MECHANICAL

INSERTION/WITHDRAWAL FORCES:

Number of

Contacts

Insertion Force

pound/N

3.6/(16)

Withdrawal Force

pound/N

CONTACT ARRANGEMENTS

2

3

4

5

6

7

8

.45- 2.7/(2-12)

.67- 4.1/(3-18)

.90- 5.4/(4-24)

1.24- 6.8/(5.5-30)

1.46- 8.1/(6.5-36)

1.68- 9.5/(7.5-42)

1.90-10.8/(8.5-48)

5.4/(24)

7.2/(32)

9.0/(40)

10.8/(48)

12.6/(56)

14.4/(64)

NOTE: All connectors meet DIN specifications #41524. Din specification

numbers (except for 4-pin, 5-pin @ 240°, and 8-pin @ 262°)

STRAIGHT

CORD PLUG

with Shielded Barrel

DIN PLUGS

STRAIGHT

CORD PLUG

with 30° lock ring

Type 15GM7M – typical: Male cord plug with shielded barrel

and insulated snaplock plastic body. Two piece metal barrel

surrounds pin insert to form an electrical shield. The entire

insert assembly is held together by snapping the insulated

plastic shell over the assembly. The barrel’s special metal tab

locks the shell in place. Standard color of plastic shell is gray.

All-purpose cable clamp.

Type 05CL5M – typical Male plug with ground key-rib.

Unique 30° turn lockring securely fastens two halves of

connector. Mates with lock flange female connectors and

receptacles. Insert screw holds insert assembly in shell and

also retains lockring on shell. Flexible black strain relief with

7/32" diameter cable entry. Heavy duty clamp.

ORDERING INFORMATION

Part Number

Description

Arrangement

ORDERING INFORMATION

◊

3 pins at 180°

Gray body and strain relief.

05GM3M

2

Part Number

◊05CL3M

05CL5M

Description

3 pins at 180°

5 pins at 180°

4 pins at 210°

5 pins at 240°

7 pins at 270°

8 pins at 270°

Pin Arrangement

5 pins at 180°

2

5

3

4

7

9

05GM5M

5

3

Gray body and strain relief

4 pins at 210°

Gray body and strain relief

◊09GM4M

◊09CL4M

◊12CL5M

◊15CL7M

◊15CL8M

◊

5 pins at 240°

Gray body and strain relief

12GM5M

4

6 pins at 240°

◊12GM6M

◊15GM7M

◊15GM8M

◊20GM8M

6

Gray body and strain relief

7 pins at 270°

Gray body and strain relief

◊ Available on special order only; contact Switchcraft for price and delivery.

7

8 pins at 270°

Gray body and strain relief

9

8 pins at 262°

Gray body and strain relief

10

SPECIFYING NOTE: Use letter “JL” in place of “GM” to order same part number

with black housing.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

DIN PLUGS AND RECEPTACLES

47

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DIN PLUGS AND RECEPTACLES

STRAIGHT CORD PLUG with Extended Barrel

RIGHT-ANGLE CORD PLUG

with 8 Position Barrel and 30°

Lockring

TYPE 12BL6M – TYPICAL

TYPE 05YL5M – TYPICAL

Male plug with ground key-rib. Nickel-plated diecast handle.

Contact friction coupling. Flexible black strain relief. Heavy

duty cable clamp.

Right-angle chassis hugging, male plug with flexible strain

relief. Unique 8-position barrel gives you a choice of any one

of eight different cable entry angles. ground key rib 30° turn

lockring securely fastens two halves of connector.

ORDERING INFORMATION

Part Number

Description

Pin Arrangement

Part Number

◊05YL3M

◊05YL5M

◊09YL4M

◊12YL5M

Description

3 pins at 180°

5 pins at 180°

4 pins at 210°

5 pins at 240°

Pin Arrangement

2 pins with insulated

switch actuator

2

5

3

4

◊03BL2M

1

◊05BL3M

◊05BL5M

◊09BL4M

12BL5M

◊12BL6M

◊15BL7M

◊15BL8M

3 pins at 180°

5 pins at 180°

4 pins at 210°

5 pins at 240°

6 pins at 240°

7 pins at 270°

8 pins at 270°

2

5

3

4

6

7

8

RIGHT-ANGLE CORD PLUG

with 8 Position Barrel

05DL5M shown

TYPE 05DL5M – TYPICAL

Right-angle chassis hugging, male plug with flexible black

rubber strain relief. Unique 8-position barrel offers a choice of

eight different cable entry angles.

ORDERING INFORMATION

Part Number

◊05DL3M

◊05DL5M

◊09DL4M

◊12DL5M

◊12DL6M

◊15DL7M

Description

3 pins at 180°

5 pins at 180°

4 pins at 210°

5 pins at 240°

6 pins at 240°

7 pins at 270°

Pin Arrangement

2

5

3

4

6

7

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

48 ^{DIN PLUGS AND RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DIN PLUGS AND RECEPTACLES (continued)

STRAIGHT CORD PLUG with Flush Socket Insert

STRAIGHT CORD PLUG with Lock Flange

TYPE 06EL5F – TYPICAL

TYPE 06AL5F – TYPICAL

Female plug with ground contact. Lock flange designed to

accept 30° lockring. Insert screw firmly holds insert assembly in

shell. Flexible black strain relief with 7/32" diameter cable entry.

Heavy duty cable clamp.

Female plug with ground contact. Diecast metal shell,

nickel-plated. Two contact plug, Part number 04AL2F includes

a break circuit switch (1-B) which is opened by engaging the

insulated switch actuator of the mating plug or receptacle.

Flexible black strain relief.

2.24

57.0

.216

5.5

.393

10.0

.216

5.5

.456

11.6

.622

15.8

0.51

1.3

1.22

31.0

Stain Relief

ORDERING INFORMATION

Part Number

Description

Contact Arrangement

Part Number

◊◊06EL5F

13EL5F

Description

Contact Arrangement

5 contacts at 180°

5 contacts at 240°

8 contacts at 270°

F

E

N

◊06AL5F

◊13AL5F

◊13AL6F

◊15AL7F

◊15AL8F

5 contacts at 180°

5 contacts at 240°

6 contacts at 240°

7 contacts at 270°

8 contacts at 270°

F

E

G

H

N

◊15EL8F

RECEPTACLE with Extended Shell

ORDERING INFORMATION

TYPE 57KD3M – TYPICAL

Male receptacle, 3 pins, with ground key-rib. Diecast

extended shell and flange for chassis or panel mounting.

Turret terminals.

Part Number

Description

Pin Arrangement

57KD3M

3 pins at 180°

2

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{DIN RECEPTACLES}49

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DIN RECEPTACLES (continued)

RECEPTACLE with Closed Circuit Switch

RECEPTACLE for Chassis or Panel Mounting

For shielded and extended barrel plugs

TYPE 59GB3F – TYPICAL

TYPE 57GB5F – TYPICAL – FLARED SOLDER

TERMINALS

Drawn metal recessed shell with mounting flange and ground

contact. Available flared solder terminals. Part Number

58GB3F features two extra blanks in insert for proper mating

(5 pins at 180°) plug where applications may require greater

connector flexibility. Flared solder terminals standard.

Unique 3 and 5 contact receptacles include a 1-B (closed

circuit) switch which is mounted to drawn metal shell. Switch

is actuated by the shell of the mating plug. Receptacles also

provide complete shielding through the ground contact.

Flared solder terminals.

ORDERING INFORMATION

Part Number

◊57GB3F

◊57GB5F

◊60GB4F

◊61GB5F

◊61GB6F

◊62GB7F

◊62GB8F

Descriptions

Contact Arrangement

Part Number

Description

Contact Arrangement

3 contacts at 180° plus

closed-circuit switch

(Schematic #5)

3 contacts at 180°

5 contacts at 180°

4 contacts at 210°

5 contacts at 240°

6 contacts at 240°

7 contacts at 270°

8 contacts at 270°

B

F

◊59GB3F

B

D

E

G

H

N

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

50 ^{DIN RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DIN RECEPTACLES (continued)

RECEPTACLE for Lockring Plug

Flared solder terminals on

Part Number 57HB5F

RECEPTACLE

for Printed Circuit Board

Mounting

TYPE 61HA5F – TYPICAL

TYPE 57NC5F – TYPICAL

Female receptacle with ground contact. Chassis or panel

mount. Diecast bayonet extension shell with mounting flange.

Mates with all lockring plugs. such as Part Number 12CL5M.

Part Number 55HA2F includes closed-circuit switch (1-B). All

receptacles have straight solder terminals, except as noted.

Mounts to printed circuit boards. Special PC type terminals

“snap-in” precut boards. See drawing. Tubular metal shell

with ground contact. Part Number 58NC3F mates with

either 3 pin or 5 pin (at 180°) plugs because of its 2 extra

blanks in the contact insert.

ORDERING INFORMATION

Part Number

Description

Pin Arrangement

Part Number

Description

Contact Arrangement

◊55HA2F

2 contacts with

closed-circuit switch

(Schematic #4)

A

◊57NC5F

5 contacts at 180°

F

3 contacts at 180°

2 extra blanks

◊58NC3F

C

57HB3F*

57HB5F*

60HA4F

61HA5F

62HB7F*

62HB8F*

3 contacts at 180°

5 contacts at 180°

4 contacts at 210°

5 contacts at 240°

7 contacts at 270°

8 contacts at 270°

B

F

◊60NC4F

◊61NC5F

◊62NC7F

◊62NC8F

4 contacts at 210°

5 contacts at 240°

7 contacts at 270°

8 contacts at 270°

D

E

H

N

D

E

H

N

“C” in part number indicates PC terminals.

◊ Available on special order only; contact Switchcraft for price and delivery.

*Flared solder terminals

“A” in part number indicates straight terminal. (solder lug).

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{DIN RECEPTACLES}51

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

RIGHT-ANGLE

RECEPTACLE

for Printed Circuit

Board Mounting

ORDERING INFORMATION

Part Number

◊57PC3F

◊57PC5F

◊60PC4F

◊61PC5F

◊61PC6F

◊62PC7F

◊62PC8F

Description

Contact Arrangement

3 contacts at 180°

5 contacts at 180°

4 contacts at 210°

5 contacts at 240°

6 contacts at 240°

7 contacts at 270°

8 contacts at 270°

B

F

D

E

G

H

N

TYPE 57PC5F–TYPICAL

Mounts to PC boards. Plugs connect at right-angle to mounting

surface. Part Number 57PC3F mates with either 3 or 5 pin

(at 180°) plugs because of two extra blanks in contact insert.

ground contact provides complete shielding through receptacles.

◊ Available on special order only; contact Switchcraft for price and delivery.

61PC5F, 61PC6F

.709

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

52 ^{DIN RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RIGHT-ANGLE

Part Number

◊57PC3FS

◊57PC5FS

◊60PC4FS

◊61PC5FS

◊61PC6FS

◊62PC7FS

◊62PC8FS

Description

Contact Arrangement

SHIELDED RECEPTACLE

for printed circuit board

mounting

3 contacts at 180°

5 contacts at 180°

4 contacts at 210°

5 contacts at 240°

6 contacts at 240°

7 contacts at 270°

8 contacts at 270°

B

F

D

E

G

H

N

TYPE 60PC4FS–TYPICAL

SPECIFYING NOTE: Another series of receptacles with a trimmed metal flange

.052" (1.32 mm) below housing top is available. Replace suffix “S” with “T” in

part numbers above to specify these receptacles or contact Switchcraft.

Mounting: #2 or #3 self-tapping screw.

Similar to 57PC5F – Typical, except flange surrounding face

of insert is metal to provide through-grounding between plug

and receptacle and to potential panel/chassis for common

grounding.

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{MINI-DIN RECEPTACLES}53

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DIN RECEPTACLES (continued)

MINI-DIN RIGHT-ANGLE RECEPTACLES

Miniature DIN right-angle connectors are designed for

personal computer, video and data communications, medical

and instrumentation equipment and systems.

RIGHT-ANGLE, PC MOUNT RECEPTACLES

Available with 3 through 8 contacts, female only, receptacles

also have a standard (and separate) ground contact system.

Ground terminal can be straight or snap-in type. Snap-in

terminals are bifurcated to assure tight hold down on PC

board before, during and after soldering. Solder wicking

around the terminal strengthens the connection. Additionally,

PC terminals are staggered to assure more “hold down”

capability during soldering.

Receptacle/plug retention is “friction” type, and a separate

outer shield can be specified.

SPECIFICATIONS

Ratings: 1A, 100 VAC; 2A, 12 VDC.

Series SMD*FRAX10: 3 through 8 contacts, female,

right-angle PC mount, straight ground terminal, and

no outer shield.

Insulation Resistance: 50 MΩ minimum

Dielectric Strength: 250 VDC for 1 minute.

Contact Resistance: 30 mΩ maximum

Insertion/Withdrawal Force: 0.8 to 5 kilograms

Withdrawal Force: 0.8 to 4 kilograms

Contacts/Terminals: Copper alloy, silver or gold-plated

Ground Terminal: Copper alloy, nickel-plated.

External Shield: Copper alloy, solder-coated.

Body: Black molded thermoplastic, UL 94V-0.

Series SMD*FRAX20: Same as SMD*FRAX10, except

with bifurcated snap-in ground terminal.

Series SMD*FRAX11: 3 through 8 contacts, female,

right-angle PC mount, straight ground terminal, and

outer shield.

Series SMD*FRAX21: Same as SMD*FRAX11, except

with snap-in ground terminal.

Series DMD*FRAX111: Dual stacked miniature DIN

connectors, available in 4, 5, 6, and 8 contacts. Shielded

and non-shielded versions available.

Dimensions: .552" (14 mm) wide x .502"

(12.8 mm maximum depth x .642" (16.3 mm) height,

including terminals.

MINI-DIN RIGHT-ANGLE RECEPTACLES PART NUMBER SCHEME

Series

SMD-Single Insert#:

DMD-Dual 3-8

Contacts Style

Shield/Ground

Optional Mounting Screw Hole

FRA

110: Unshielded, no snap-in ground

111: Shielded, no snap-in ground

120: Unshielded, snap-in ground

121: Shielded, snap-in ground

A: Adds screw hole

Blank: None

Note: Dual available in 4,5,6, and 8 only

Note: Snap-in ground available on single only

Note: Optional mounting screw hole available on dual only

Note: Special order only, contact factory for details

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

54 ^{MINI-DIN RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DIN RECEPTACLES (continued)

SMD SERIES

RECOMMENDED PC BOARD LAYOUTS (Viewed from component side)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

MINI-DIN RECEPTACLES

55

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DIN RECEPTACLES (continued)

DMD SERIES

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

56 ^{SINGLE AND DUAL STACKED USB CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SINGLE AND DUAL STACKED USB CONNECTORS

SUSB

DUSB

Switchcraft introduces single and dual USB connectors. The USB

connectors are fast becoming the industry standard for plug and

play connectivity between PCs and their peripherals. The DUSB

and USB connectors are RAPC mounted, with kinked terminals for

snap-in placement to the PC board. Both meet all Universal Serial

Bus standards.

FEATURES AND BENEFITS

• Snap-in terminals facilitate wave soldering

• Shielded for reduced EMI/RFI emissions

• Dual stacked version increases PC board density

APPLICATIONS

• Personal Computer

• Data Communications

• Medical Equipment

• Test Equipment

• Instrumentation

SPECIFICATIONS

GENERAL

Voltage Rating: 30 VAC (rms) Max.

Current Rating: Signal application only, 1A Max. per contact

Contact Resistance: 25m ohms Max. initial

Temperature Rating: 32°F to 104°F (0°C to 40°C)

Insertion Force: 7.7 lbs Max. (3.5 kg Max.)

Withdrawal Force: 0.8 lb Min. (0.4 kg Min.)

Life: 1500 cycles

MATERIALS

Body: Black, molded thermoplastic, UL 94V-0

Shell: Copper alloy, tin plated

Contact Terminal: Copper alloy, gold plating in mating area,

tin plating on solder tails, all over nickel plating.

Part Number

Description

SUSB Single

DUSB Dual Stacked

USB Connector

Note: Special order only, contact factory for details.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

SINGLE AND DUAL STACKED USB CONNECTORS

57

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

SINGLE AND DUAL STACKED USB CONNECTORS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

58 ^{IEEE 1394 FIREWIRE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

IEEE 1394 FIREWIRE CONNECTORS

1394SMT

1394RAPC

Switchcraft introduces both right angle PC and surface

mount versions of IEEE 1394 Firewire connectors. The

Firewire connectors are becoming another connector

standard used in the upcoming multimedia/computer

market. The connectors meet IEEE 1394R-4006N Series

standards.

FEATURES AND BENEFITS

• Shielded housings to reduce EMI/RFI emissions

• Mounting posts add stability for wave soldering

• Low profile requires less space

APPLICATIONS

• Multimedia

• Video

• Personal Computers

• Computer Peripherals

SPECIFICATIONS

GENERAL

Voltage Rating: 40 VAC

Current Rating: 1.5A

Contact Resistance: 30m Ohms Max.

Temperature Rating: -55°C to +105°C

Insertion Force: 6.0 lbs. Max.

Withdrawal Force: 4.4 lbs. Min.

Lifecycles: 1,500 Min.

Part Number

1394RAPC

1394SMT

Description

IEEE 1394 RAPC

IEEE 1394 SMT

Note: Special order only, contact factory for details.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

IEEE 1394 FIREWIRE CONNECTORS

59

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

IEEE 1394 FIREWIRE CONNECTORS (continued)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

60 ^{SLIM-LINE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SLIM-LINE CONNECTORS

TYPICAL SL172F REAR MOUNT RECEPTACLE

TYPICAL SL402M CORD PLUG

PIN TERMINALS

Large, rugged plated

copper alloy; solder

cup type.

HEX NUT

Used in mounting

rear or front of

panel receptacles

(supplied standard).

THREADED

BUSHING

FEMALE INSERT*

Rugged molded

black plastic barrel

construction;

positively keyed to

housing.

FLATTED BARREL

Keys to inside flat

on male insert.

Polarizes the con-

nection. Correct

CABLE CLAMP

Extra large and

CORD PLUG

HOUSING

Precision-drawn,

plated copper alloy

with non-glare

matte finish.

STRAIN RELIEF

SPRING

Provides positive

relief from cable

wear at opening in

plug housing.

Coupler ring on

mating plug threads

onto bushing and

keeps plug/receptacle

from working loose.

rugged clamp pro-

tects soldered ter-

minations (also

facilitates grounding/

shielding feature

when used on

mating every time.

receptacle insert).

LOCK WASHER

Prevents rear

or front of panel

receptacle from

working loose

when installed

(supplied standard).

REAR OF

FLAT WASHER

Used in mounting

rear and front of

panel receptacles

(supplied standard).

CONTACT

CONTACTS

Held captive in

insert. Excellent pin

retention force.

Copper alloy plated.

MALE INSERT*

Rugged black

LATCH SPRING

Captive spring locks

insert to housing

COUPLER RING

Held captive on plug; Latch spring on

LATCH DETENT

PANEL MOUNT

RECEPTACLE

Tough, plated

TERMINALS

Rugged solder lug

type; copper alloy

plated

plastic; keyed to

housing. Durable

plated copper alloy

pins are 100%

molded-in.

non-reflective matte

finish. Threads onto

receptacle bushing

(or mating plug) to

hold connector

halves secure

from accidental

separation.

insert seats in

detent to hold insert

firmly in housing.

diecast housing

with non-reflecting

matte finish. Mounts

in D-shape (self-

keyed) hole. Other

receptacle types

are: Front of Panel

Mount and Flange

Mount.

*NOTE: Insert

fits both plug

and receptacle

housings; can be

interchanged at

any time.

DESIGN FEATURES

Slim-Line^®Audio Connectors are a unique series of premium

quality connectors featuring interchangeable inserts which

allow any plug or receptacle to be male or female. This

versatility is valuable in a wide variety of applications:

microphones, public address systems, 2-way, CB, ham, and

marine radios, audio-visual systems, industrial control and

instrumentation, broadcast, security and medical electronics.

Receptacles can be specified with same male and female insert

combinations as cord plugs. For rear and front of panel

mounting types, hex nuts, lock washers, and flat washers are

supplied. For flange mount receptacles, mounting holes in flange

accept #4 machine screw or .125" (3.18 mm) diameter rivet.

CORD PLUGS

Miniature Cord Plugs feature nickel-plated copper alloy

housings with matte finish on exterior parts. Plugs may be

specified with inserts having 2-, 3-, 4- and 5-pins (male) or

contacts (female), or 2-, 3-, or 4-contact receptacles having

shunts (N.C.) on two contacts (special order only). Extra large

cable clamp protects against pulling and twisting strains on

terminations. Strain relief spring protects against excess cable

wear at entry point at rear of housing. Cord plugs accept cables

up to .281" (7.14 mm) diameter. Captive coupler ring feature

(Series SL40) provides secure mechanical connection and

protection against shock and vibration between cord plugs and

mating plug (Series SL41) or receptacle.

APPLICATIONS

Retrofit/Replacement; Slim Line Cord Plug (SL405M) and

Receptacle (SL105F) are recommended as a possible choice

to replace Switchcraft/DIN plug (12CL5M) and receptacle

(55HA5F). Receptacle SL105F fits the same mounting holes

as the Switchcraft/DIN receptacle.

Four pin/contact Slim-Line plugs and receptacles are

recommended as direct replacements for the original

Slim-Line connectors, Series 2504, and for the molded

version of the Slim-Line connector, Style ST34.

RECEPTACLES

Three types of receptacles can be specified:

1. Flange mount (Series SL10)

2. Rear of panel mount (Series SL17)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{SLIM-LINE CONNECTORS}61

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

SLIM-LINE CONNECTORS (continued)

SPECIFICATIONS

MATERIALS

INSERTS

Inserts are molded of high-strength plastic, and are

completely interchangeable between plug and receptacle

housings at any time. Inserts are keyed to housings, and male

and female inserts are polarized to prevent mismating.

Receptacle Housings: Die-cast zinc, nickel-plated.

Cord Plug Housings: Copper alloy, nickel-plated.

Inserts: Glass-reinforced thermoplastic. UL 94 V-0.

Female Contacts: Copper alloy, silver-plated, solder lug type.

Pins: Copper alloy, silver-plated, solder cup type.

Cable Clamp, Strain Relief, and Mounting Hardware:

Steel, plated. Latch: Steel, plated.

PIN/CONTACT CONFIGURATIONS:

Pins

Contacts

Contacts (Shunts)

2

3

4

5

2

3

4

5

2 (N.C. Shunt on each contact)

3 (N.C. Shunts on contacts 1 and 3)

ELECTRICAL

Current Rating: 5 Amps carry only.

4 (N.C. Shunts on contacts 1 and 4)

_

◊Add an “S” to end of part number for shunts. Special order only.

MOUNTING

Cord Plugs: Plugs accept cables up to .281" (7.14 mm) diameter.

Insert is installed from front, and the captive latch spring locks

insert to housing. To remove insert from receptacle, depress

latch spring and apply pressure to rear of insert (DO NOT

APPLY PRESSURE TO TERMINALS). On cord plugs, depress

latch spring and press in on strain relief to free the insert.

Receptacles: Flange mount type mounts in panels or chassis

up to .188" (4.78 mm) thick. .125" (3.18 mm) diameter holes

accept #4 machine screws or .125" (3.18 mm) diameter rivets.

Rear and front of panel types mount in “D”-shaped hole in panels

or chassis up to .219" (5.56 mm) thick. Hex nut (SL01), lockwasher

(SL02), and flat washer (SL03) are supplied for mounting.

GROUNDING/SHIELDING

Housings shield internal connections and provide ground

(common) connections without using a pin/contact. On cord

plugs, ground lead (or shield) is connected to cable clamp. For

receptacles Cable Clamp, SL04 is ordered separately as a

special and installed. If desired, ground/shield connection may

then be made to clamp. When mated, a continuous, shielded,

low resistance path is made through the connector.

CABLE CLAMP AND STRAIN RELIEF

Cord Plugs: Plugs are supplied with rugged cable clamps and

strain relief springs. Cable clamp serves two valuable functions: to

firmly hold cable to prevent pulling or twisting strains on soldered

terminations, and as a connecting point for ground (common) or

shield when grounding/shielding through the connector is

required.

Receptacles: Receptacles are not supplied standard with

cable clamp for strain relief. If grounding/shielding feature is

desired, separate Cable Clamp, SL04, is installed on receptacle

insert.

Part Number

Item

◊SL01

◊SL02

◊SL03

◊SL04

◊SL05

Hex Nut

Lockwasher

Flat Washer

MOUNTING HARDWARE

(Supplied with Series SL17 and SL18 receptacles)

Cable Clamp

Strain Relief Spring

SLIM-LINE CONNECTOR PART NUMBERING SYSTEM

Number of

Contacts

SERIES

HOUSING TYPE

Gender

Options

SL

SLIM-LINE

NONE

2

3

4

5

M MALE

S

WITH SHUNTS

10 RECEPTACLE, FLANGE MOUNT

17 RECEPTACLE, REAR MOUNT

18 RECEPTACLE, FRONT MOUNT

40 CORD PLUG WITH COUPLING RING

41 CORD PLUG WITHOUT COUPLING RING

F

FEMALE

PIN AND CONTACT ARRANGEMENTS

SCHEMATIC CIRCUITS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

62 ^{SLIM-LINE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SLIM-LINE CONNECTORS (continued)

SL40 CORD PLUG with Coupler Ring

SL402M (typical)

SL41 CORD PLUG without Coupler Ring

SL413F (typical)

Non-reflective metal shell; coupling ring; 2 through 5 pins

(male) or 2 through 5 contacts (female). Also 2-, 3- and

4-contact inserts with two shunted (N.C.) contacts. Efficient

cable clamp and strain relief.

Non-reflective metal shell; 2 through 5 pins (male) or

2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with

two shunted (N.C.) contacts. Efficient cable clamp and strain relief.

SL MALE CORD PLUGS

Part Number

Pins

Arrangements

Part Number

Pins

Arrangements

SL402M

SL403M

SL404M

SL405M

2

3

4

5

1

2

3

4

SL413M

SL414M

SL415M

3

4

5

2

3

4

SL FEMALE CORD PLUGS

Contact

Part Number

Contact

Arrangements

Part Number

Contacts

Arrangements

SL402F

SL403F

SL404F

SL405F

2

3

4

5

A

B

C

D

SL412F

SL413F

SL414F

SL415F

2

3

4

5

A

B

C

D

STRAIN RELIEF SPRING

Strain Relief Spring

Part Number SL05

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

SLIM-LINE CONNECTORS

63

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

SLIM-LINE CONNECTORS (continued)

SL10 RECEPTACLES

Flange Mount

SL17 RECEPTACLES

Rear of Panel Mount

SL104F (typical)

SL175F (typical)

SL17 and SL18 Receptacles

Non-turn panel cut-out

Flange mounted; 2 through 5 pins (male) or 2 through 5 contacts

(female). Also 2-, 3- and 4-contact inserts with 2 shunted (N.C.)

contacts.

Rear of panel mount; 2 through 5 pins (male) or 2 through

5 contacts (female). Also 2-, 3- and 4-contact inserts with

2 shunted (N.C.) contacts. Mounting locknut (Part Number

SL01), lock washer (Part Number SL02), and flat washer

(Part Number SL03) supplied.

SL MALE RECEPTACLES

Part Number

Pins

Arrangements

Part Number

Pins

Arrangements

SL102M

SL103M

SL104M

SL105M

2

3

4

5

1

2

3

4

SL173M

SL174M

SL175M

3

4

5

2

3

4

SL FEMALE RECEPTACLES

Contact

Part Number

Contacts

Arrangements

Part Number

Contacts

Arrangements

SL172F

SL173F

SL174F

SL175F

2

3

4

5

A

B

C

D

SL102F

SL103F

SL104F

SL105F

2

3

4

5

A

B

C

D

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

64 ^{SLIM-LINE CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SLIM-LINE CONNECTORS (continued)

SL18 RECEPTACLES

Front of Panel Mount

INSTALLING CABLE CLAMP ON INSERT

To install cable clamp on any insert:

1. Position insert approximately as shown in the diagram.

2. Hold clamp at approximately 30° angle (as shown). Place

tip of clamp center finger into slot under molded ring “A”.

Note position of notch on insert in relation to slot.

3. Press center finger forward into slot and reduce angle of

clamp until clamp shoulders seat just ahead of molded

barrier on rear of insert “B”.

SL183FS (typical)

Cable Clamp SL04

MOLDED

.696

PANEL HOLE

(17.7)

CABLE

CLAMP

RING

“A”

NOTCH

ON

INSERT

“B”

Front of panel mount; 2 through 5 pins (male) or 2 through

5 contacts (female). Also 2-, 3- and 4-contact insert with

3 shunted (N.C.) contacts. Mounting locknut (Part Number

SL01), lockwasher (Part Number SL02), and flat washer

(Part Number SL03) supplied.

SL MALE RECEPTACLES

Part Number

Pins

Arrangements

SL182M

SL183M

SL184M

SL185M

2

3

4

5

1

2

3

4

SL FEMALE RECEPTACLES

Contact

Part Number

Contacts

Arrangements

SL182F

SL183F

SL184F

SL185F

2

3

4

5

A

B

C

D

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

AUDIO CONNECTORS

65

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

CB CONNECTORS

Miniature 3 and 4 circuit connectors for microphone connections in

mobile/communications equipment. Cord plug has silver-plated

copper alloy contacts, large cable clamp, and strain relief spring.

CB-3F

CB-3F 3-contact female cord plug. Knurled coupling ring has

internal metric M16x1 thread. Solder lug terminals accept wires

up to #18 AWG. Accommodates cables up to .281" (7.14 mm)

diameter.

CB-4F Same as CB-3F. except 4 contacts.

CB-3M 3-pin male receptacle. Housing keys insert of mating plug;

bushing with external M16x1 metric thread mates with coupling ring

on plug. Cup-type terminals accept wires up to #16 AWG. Mounts

in .64" (16.26 mm) diameter hole from front of panels up to .125"

(3.18 mm) thick, using washer and locknut supplied. Can also be

“D”-hole mounted for non-turn mounting (see drawing).

Pin diameter. is .093".

CB-3M

CB-4M Same as CB-3M, except 4 pin.

Dimensions, In. (mm)

Insert

Part No.

Contacts

Length

Diameter

.703 (17.86)

.705 (19.05)

CB3F

CB3M

3

1.594 (40.49)

.781 (19.84)

MICROPHONE CONNECTORS

Connectors with 5/8-27 threads are designed for use with single

conductor microphone cable with .281" (7.14 mm) maximum

outside diameter. 44 adapts 2501F to fit standard 2-conductor

phone jack. Coupling ring on 2501F is removable for fast change

from female to male type. Spring assembled into body, cable braid

and spring clamped by hollow set screws .281" (7.14 mm)

maximum cable diameter. 2501MP mounts in .390" (9.92 mm)

diameter hole.

44

2501M

2501F

2501MP

MINI-CON MINIATURE CONNECTORS

Approximately 1/2 the size of standard microphone connectors.

Ideal for miniature lapel microphones, musical instruments and

wherever small cable is used. Accepts single-conductor shielded

cable up to .187" (4.76 mm) diameter Coupling ring on 5501F

removable for quick change of female to male type. Cable is braid

spring clamped to body by hollow point set screw.

5501F

5501M

Mounting Hole,

Part Number

5501F

Description

Female Plug

Male Plug

Inches (mm)

—

◊5501M

.375 (9.52)

(Front of panel)

◊5501MF

Receptacle

.375 (9.52)

(Front of panel)

5501MP

5501MF

5501MP

◊Available on special order; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

66 ^{BNC CONNECTORS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

HP75BNC SERIES BNC CONNECTORS

Switchcraft Inc. introduces a complete line of true 75 Ohm BNC cable

mount connectors. This new series was developed for the broadcast

industry, or wherever true 75 Ohm impedance BNC's are used. The

HP75BNC Series is available in a wide range of styles, to

accommodate the most popular types of coaxial cables. All are crimp

terminated using standard crimping tools.

FEATURES AND BENEFITS

• True 75 Ohm impedance

• Gold-plated center pins for increased life

• Available for a wide range of cable types

• Outstanding electrical performance

• Rugged nickel-plated, machined shells

SPECIFICATIONS

Electrical

Characteristic Impedance: 75 Ohms

Voltage Rating: 500 Volts RMS

Return Loss: Less than -25 db at 3 GHz

Insulation Resistance: 5000 Megohms min

HP75BNC9

MECHANICAL

Lifecycles: 500 min

Center Contact Retention: 6 lbs. min

Coupling Mechanism: 100 lbs. min

Force to Engage: 2.5 lbs. max

ENVIRONMENTAL

Thermal Shock: -65° C to 165° C

Moisture Resistance: Mil Std 202

Corrosion: Mil Std 202

Flammability: UL 94-VO

Vibration: Mil Std 202

Solvent Resistance: Mil Std 202

FINISH

Body/Bayonet: Nickel-plated copper alloy

Center Conductor: 50 mi gold-plated copper alloy

ORDERING INFORMATION

Part Number

Cable Type

HP75BNC1

HP75BNC2

HP75BNC6

HP75BNC7

HP75BNC9

HP75BNC10

HP75BNC12

Belden #8241

Belden #8281B

Belden #1695A

Belden #1694A

Belden #1505A

Belden #1506A

Belden #1855A

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

BNC CONNECTORS

67

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

HP75BNC SERIES BNC CONNECTORS (continued)

S

11

log MAG

REF -15 dB

5 dB / DIV

3.0

GHz

1.5

GHz

.30

MHz

RETURN LOSS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

68 ^{EAC RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES

SERIES EAC

Two and three-pin/contact grounding primary power Receptacles are designed for use in European and domestic

receptacles are designed to meet EN 60 320, as well as instrumentation, power rack mounted devices, test equipment

applicable UL, CSA, VDE and other specifications. and appliances. Three-pin male receptacles have .125" (3.18

Receptacles feature choice of short, standard or long solder mm) longer center (ground) pin. Ground circuit is established

lugs or FASTON ® terminals. Receptacles snap-in or screw before power circuits “make”, and is maintained until after power

mount from the front or rear of panel. Receptacles have circuits “break”.

orbitally riveted lugs (except EAC233, EAC305, EAC323

EAC325, EAC333, EAC405) for superior mechanical/electri-

cal connections. Extended socket versions permit minimum

behind-panel depth.

EAC227

EAC311

EAC305

EAC323

EAC325

EAC309

EAC333

EAC333S

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{EAC RECEPTACLES}69

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

EAC305—3-contact female receptacle. Front mount with

two, #4 screws or .094" (2.38 mm) diameter rivets

(not supplied).

SERIES EAC

EAC309—3-pin male receptacle with standard lug terminals.

Mounts from front or rear of panel with two, #5 screws or

.125 " (3.18 mm) diameter rivets (not supplied).

EAC311—3-pin male receptacle with FASTON^®terminals.

Mounts from front or rear of panel with two, #5 screws or

.125 " (3.18 mm) diameter rivets (not supplied).

◊EAC315—3-pin male receptacle with long solder lug terminals.

Mounts from front or rear of panel with two, #5 screws or .125"

(3.18 mm) diameter rivets (not supplied).

EAC405

◊EAC319—3-pin male receptacle with short solder lug

terminals. Mounts from front or rear of panel with two,

#5 screws or .125" (3.18 mm) diameter rivets (not supplied).

SPECIFICATIONS

ELECTRICAL

Insulation Resistance: 2 million megohms @ 500 V DC.

Dielectric Strength: 1500 V (rms).

◊EAC323—3-pin male receptacle with short solder lug terminals.

Extended socket housing (mounting flange on rear of receptacle)

provides more behind panel clearance. Mounts with two,

#4 screws or .094" (2.38 mm) diameter rivets (not supplied).

Arcing Test: Meets UL 498 Standard.

EAC325—3-contact female receptacle with short solder lug

terminals. Extended housing (mounting flange on rear of

receptacle) provides more behind panel depth. Mounts with two,

#4 screws or .094" (2.38 mm) diameter rivets (not supplied).

MECHANICAL

Solderability Standard: Meets MIL-STD-202, method 208,

EIA RS-186-9E.

ENVIRONMENTAL

EAC327—3-pin male receptacle, similar to EAC319 except

with standard solder lugs.

Thermal Range: -55° C to +65° C (except EAC45x series).

Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E,

method 5.

EAC333—3-pin, 10A, 250V male receptacle with right-angle

housing for PC mount. PC terminal and hole mounting details

are the same as for EAC233. Ground pin is integral with

ground solder lug on rear of receptacle.

MATERIAL

Shell: EAC307 through EAC327. Black polyester. EAC303,

EAC307 through EAC315. UL flammability rating of UL94 V-0,

yellow card #E45575.

◊EAC333S—Similar to EAC333, but with two, snap-in

retainers through mounting flanges for PC mount.

EAC309 through EAC327, EAC333. Black polyester, UL

flammability rating of UL94 V-0, yellow card #E45575.

◊EAC405—3-contact female receptacle with standard solder

lug terminals. Snap-in panel mounting.

EAC233, EAC233S, EAC305, EAC325, and EAC333S. Black

polycarbonate, UL flammability rating of UL94 V-0, yellow

card #E45329.

EAC409—3-pin male receptacle with standard solder lug

terminals. Snap-in panel mounting.

EAC411—3-pin male receptacle with FASTON terminals.

Snap-in panel mounting.

EAC323, EAC409 through EAC411 Black polycarbonate, UL

flammability rating, or equivalent UL94 V-0, yellow card

#E33640, or equivalent.

EAC413—3-pin male receptacle with FASTON terminals on

LINE and NEUTRAL and a solder lug on EARTH GROUND.

Snap-in panel mounting.

Pins, Contacts and Terminals: Plated copper alloy.

◊EAC227—2-pin male receptacle with standard solder lug

terminals, similar to EAC327.

EAC451—3-contact female receptacle with straight PC

terminals for use in “HOT” applications. Snap-in panel mounting.

◊EAC233—2-pin, male receptacle with right-angle housing

for PC mount. PC terminals project .130" (3.3 mm) to extend

through PC board. Rear of panel mount. Two, .136 " (3.45

mm) diameter holes permit fastening to PC board; two

additional .136" (3.45 mm) holes are for fastening to panel or

chassis, if required.

EAC453—Same as EAC451 except with solder lug

terminations.

EAC455—Same as EAC451 except with FASTON

terminations.

EAC457—Same as EAC451 except with FASTON power

terminations and solder lug ground termination.

◊EAC233S—Similar to EAC233, but with two, snap-in

retainers through mounting flanges for PC mount.

◊ Available on special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

70 ^{EAC RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SERIES EAC (continued)

Pins/

Switchcraft

Mating Number ³

Part Number

Contacts ¹

Mounting ²

Terminals

Listings

UL

Ratings

Comments ⁴

◊EAC227

M

Front or Rear

Solder Lug

15 A, 250 V AC

P2392

—

CSA

UL, CSA,

VDE

15 A, 250V AC

10 A, 250 V AC

Semko, Demko, Nemko,

SETI, and SEV Approved

◊EAC233

◊EAC233S

◊EAC305

◊EAC309

◊EAC311

◊EAC315

◊EAC319

◊EAC323

◊EAC325

◊EAC327

◊EAC333

◊EAC333S

◊EAC405 ⁵

◊EAC409 ⁵

◊EAC411 ⁵

◊EAC413 ⁵

◊EAC451⁶

◊EAC453⁶

◊EAC455⁶

◊EAC457⁶

M

F

Rear

PC

P2392

—

UL, CSA,

VDE

15 A, 250 V AC

10 A 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

Semko, Demko, Nemko,

SETI, and SEV Approved

PC

UL & VDE

VDE

Front

Solder Lug

FASTON

Semko, and SEV Approved

UL & CSA

VDE

Demko, Semko, Nemko,

SETI and SEV Approved

Semko, Demko, Nemko,

SETI and SEV Approved

M

F

Front or Rear

Rear

P2392

—

UL & CSA

VDE

Semko, Demko, Nemko,

SETI and SEV Approved

UL & CSA

VDE

Solder Lug

(Long)

UL & CSA

VDE

Solder Lug

(Short)

15 A, 250 V AC

—

UL & CSA

VDE

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

Mounting flange on rear

Solder Lug

(Short)

Semko, Nemko, SETI Approved

UL & CSA

VDE

Solder Lug

(Short)

Mounting flange on rear

UL & CSA

VDE

Demko, Semko, Nemko

SETI and SEV Approved

Semko, Demko, Nemko,

SETI, SEV Approved

M

F

Front or Rear

Rear

Solder Lug

PC

P2392

—

UL, & VDE

CSA

Semko, Demko, Nemko,

SETI, SEV Approved

UL & VDE

CSA

Rear

PC

UL & CSA

VDE

Snap-In

Solder Lug

FASTON

—

UL, & CSA

VDE

Demko, Semko, Nemko,

SETI and SEV Approved

Semko, Demko, Nemko,

SETI and SEV Approved

Semko, Demko, Nemko,

SETI and SEV Approved

M

F

Snap-In

P2392

—

UL, CSA

VDE

Snap-In

UL, CSA

VDE

Solder Lug/

FASTON

Snap-In

UL, & CSA

VDE

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

15 A, 250 V AC

10 A, 250 V AC

Snap-In⁶

PC

Rated for use up to 120°C

UL, & CSA

VDE

F

Solder Lug

FASTON

—

UL, & CSA

VDE

F

—

UL, & CSA

VDE

Solder Lug/

FASTON

F

—

1 M = Male; F = Female.

2 F = Front; R = Rear. See mounting drawings for mounting details.

3 Also mates with Belden and other standard cords.

4 Semko (Sweden), Demko (Denmark), Nemko (Norway), SETI (Finland), SEV (Switzerland).

5 Receptacles are snap-in mount, and can be ordered to accommodate

.030, .040, .050 and .060 inch panel thickness. For snug fit in panel or

for other specifying assistance, contact Switchcraft.

If you have been using a 15 amp rated Switchcraft EAC connector

ending in an even number, you can now buy an identical part number

that has a 10 amp European rating in addition to the 15 amp UL and

CSA approval. The part number for the new dual rated part is one

less than the old part number (eg. EAC310 becomes EAC309,

EAC412040 becomes EAC411040, EAC234 becomes EAC233,

EAC458050 becomes EAC457050, etc.)

6 Available only for .050 inch and .060 inch panel thickness

◊ Available on special order only; contact Switchcraft for price and delivery.

UL No. E38829—EAC-309 thru -327 UL No. E65081—EAC-305

CSA Guide 365-E-1, Class 6233, File Card No. LR27474

Inch

VDE Certificate of Compliance No. 731 (EAC-305, -325, -405),

DIMENSIONS ARE FOR REFERENCE ONLY

all others VDE approval No. 3181.

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{EAC RECEPTACLES}71

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

Front Mount

EAC305

Figure 2

Rear Mount

EAC323

Figure 6

EAC227, EAC309,

EAC311, EAC315,

EAC319, EAC327

Front Mount

EAC323

Figure 4

EAC233, EAC309,

EAC311, EAC315,

EAC319, EAC327,

EAC333

Figure 7

Front Mount

EAC225

Rear Mount

EAC325

Figure 5

Figure 9

Snap-in Mount

EAC409, EAC411

Snap-in Mount

EAC405, EAC451, EAC453,

EAC455, EAC457

Recommended

PC Board Layout

EAC233, EAC333

Figure 10

Note: Center .07 inch diameter

hole not used for 233, 234

Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

EAC RECEPTACLES

72

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC227

EAC233S, EAC333S

Note: Center PIN/Terminals

not used on EAC233S

EAC327

EAC309, EAC315

EAC311

EAC233, EAC333

Chassis/Panel Opening

Recommended PC Board

Layout (Component Side)

Note: Center

.07 inch dia.

hole not

used on

EAC233

Note: Center

PIN/Terminals not

used on EAC233

Note: Unless otherwise specified, all dimension tolerances are ± .01" (+0.25 mm)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

^{EAC RECEPTACLES}73

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC319, EAC327

EAC323

EAC325

EAC405

EAC409

EAC411

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

EAC RECEPTACLES

74

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC413

1.065

27.05

0.875

REF

[

]

[

]

22.23

1.260

MAX

[

]

32.00

1.220

± .010

30.99 ± .25

1.079

± .004

27.41 ± .10

[

]

0.955

± .008

24.26 ± .20

[

]

0.157R

]

[

3.99

0.079

[

]

2.01

+ .005

- .008

+ .12

- .20

0.640

± .009

16.26 ± .22

0.940

0.779

± .004

19.79 ± .10

[

]

23.88

[

]

[

]

0.079

[

]

2.01

.078 x .157

1.98 x 3.99

[

]

0.276

[

]

7.01

0.276

[

]

7.01

0.760

19.30

[

]

0.032

[

]

0.81

0.281

[

]

7.14

0.160

[

]

4.06

1.130

MAX

28.70

1.030

MAX

0.490

12.45

0.610REF

“E”

[

]

[

]

0.806

± .008

20.47 ± .20

0.656

16.66

[

]

26.16

[

]

[

]

15.49

[

]

+ .008

- .005

0.120

+ .20

- .12

3.05

[

]

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

EAC RECEPTACLES

75

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC451

RECOMMENDED P.C. BOARD LAYOUT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

76 ^{EAC RECEPTACLES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC453

EAC455

FAST-ON TERMINAL

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

CONNECTORS & RECEPTACLES

EAC RECEPTACLES

77

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EAC RECEPTACLES (continued)

SERIES EAC

EAC457

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

CONNECTORS & RECEPTACLES

78 ^{POWER INLET SOCKET}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RAPC322 POWER INLET SOCKET

Switchcraft introduces the RAPC322, an IEC320 inlet

developed as a low power interconnect used in a variety

of applications. The RAPC322 is molded from 94-VO

rated material, is UL recognized, and meets a wide variety

of approvals including CSA and VDE. The RAPC is rated

at 2.5A at 250V. Applications for the RAPC322 include

notebook computers, medical devices, and data

communications products.

FEATURES AND BENEFITS

• Snap-in feet facilitate wave soldering

• Top and side slots allow chassis to captivate connector

• Conforms to EN 60320-1/2

APPLICATIONS

• Appliance Inlet

• Personal Computer

• Data Communications

• Medical Equipment

• Test Equipment

• Instrumentation

SPECIFICATIONS

GENERAL

Current Rating: 5A, UL and CSA 2.5A, VDE and

SEMKO

Nominal Voltage: 250V

Temperature Range: - 55°C to 65°C

Dielectric Strength: 2000V @ 1 minute

MATERIALS

Housing: Black, molded thermoplastic, UL 94V-0

Male Pins: Copper alloy, nickel plated

PC Terminals: Copper alloy, tin plated

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{JACK SCHEMATICS}79

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

JACK SCHEMATICS

Circuit Types: Jacks normally have through circuits, shunt

circuits, and/or isolated switching circuits, either individually or

in various combinations. The chart below shows schematics of

39 common jacks - many more combinations are possible, but

these are the most commonly used. A basic description of the

switching action of each jack accompanies each schematic.

Notation

Meaning

1-A

One, SPST switching circuit. Also known as NO

(normally open) or “make” circuit.

1-B

1-C

1-D

One, SPST switching circuit. Also known as NC

(normally closed) or “break” circuit.

One, SPDT switching circuit. Also known as transfer

or “break” before “make” circuit.

Military Identification: Military specifications covering phone

jacks use a special code to describe jack functions. Jack

schematic descriptions are coded J-1 through J-13 (as

appropriate) to coincide with Federal Item Identification

Guides for Supply Cataloging. One or more groups of suffix

numbers/letters identify isolated switching circuits used.

Suffixes identify the switching by industry recognized notation,

i.e., 1-A, 1-B, 1-C, 1-D, etc. See chart below.

One, SPDT switching circuit. Also known as “make”

before “break” circuit.

NOTE: Number indicates the quantity of circuit - 2-A means 2, A circuits.

Terminals locations shown on jack schematics do not necessarily coincide

with physical locations on jacks. Not all circuit types available on all jacks.

Single open circuit. (J1.)

Single closed circuit,

sleeve common. (J3).

Single closed circuit. (J4).

Double open circuit. (J2).

Single open circuit.

Isolated switching

“make” circuit. (J1-1-A).

Transfer circuit. (J5).

Tip closed, ring

open. (J10).

Tip closed, ring open

(common to sleeve). (J6).

Single open circuit.

Isolated switching

“break” circuit. (J1-1B).

Double closed circuit,

ring common to

sleeve. (J13).

Single closed. Isolated

switching “make”

circuit. (J4-1A).

Double closed

circuit. (J7).

Single closed circuit.

Isolated switching

transfer circuit. (J4-1C).

Double closed circuit.

Isolated switching

“break” circuit. (J7-1B).

Double open circuit.

Isolated switching

transfer circuit. (J2-1C).

Double open circuit.

Isolated switching–

separate “break” and

make circuits (J2-1A-1B).

Single closed circuit

Isolated switching

“break” circuit. (J4-1B).

Single closed circuit–

“make” before

“break”. (J8).

Single open circuit.

Isolated switching

transfer circuit. (J1-1C).

Double open circuit.

Isolated switching

“make” circuit.

(J2-1A).

Double open circuit.

Isolated switching–

separate “make”

circuits on both tip and

ring. (J2-2A).

Double closed circuit.

Isolated switching

“make” circuit on ring

spring. (J7-1A).

Single closed circuit

plus “make” before

“break”. Isolated

switching–“make”

before “break”

Single open circuit.

Isolated switching–

separate transfer and

“make” circuits.

Single closed circuit.

Isolated switching

“break” circuit. Sleeve

common to isolated

switching circuit throw.

(J4-1B).

(J1-1A-1C).

circuit. (J8-1D).

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

JACK SCHEMATICS

80

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

JACK SCHEMATICS

Single closed circuit.

Isolated switching–

“make” before “break”

circuit. (J4-1D).

Tip closed; ring open

circuits. Isolated

switching–two “make”

circuits and one “break”

circuit. (J10-2A-1B).

Single open (tip)

circuit and single closed

(ring) circuit. (J9).

Double jack,

Single open circuit–

“make” before

“break”. (J11).

2-conductors on each

side. Tip circuits cross

shunted; common

sleeve. (J12).

Tip closed; ring closed

circuits. Isolated

switching–“break”

before “make” circuit.

Double closed circuit.

Separate sleeve

“break” circuit.

Single closed circuit.

Isolated switching–

Two “make” circuits.

Single open circuit.

Isolated switching–

Two “make” circuits.

Double open circuit.

Isolated switching–

One “make” and one

“break” circuit.

Double closed circuit.

Isolated switching–

One “make” and one

“break” circuit.

Tip closed; ring open

circuits. Isolated

switching–One

Double closed circuit.

Isolated switching–

Two “make” circuits.

Double open circuit.

Isolated switching–

“break” before

“make” circuit.

WIRE-WRAPPING TERMINATIONS

Switchcraft can build complete Jack Panel Assemblies with

jacks, lamp jacks and switches with wire-wrapping terminals. If

desired, components with solder lugs and wire-wrapping

terminals can be installed in the same assembly.

WIRE-WRAPPING CONNECTIONS

Use the chart below as a guide to recommended tools to

be used with varying terminal thickness and wire gauges.

Recommended Wire-Wrapping Tool

WIRE-WRAPPING TERMINAL DESIGN

Terminal

Thickness

(Inches)

(Gardner-Denver Co. Part Numbers)

Jack springs with integral wire-wrapping terminals are made of

special copper alloy for maximum work-life with excellent

resistance to corrosion. Shank of terminal accommodates a

maximum of three wire connections. Tini-Telephone^®phone

jacks, lamp jacks and switches with wire-wrapping terminals

have slightly higher stack due to greater spacing required for

wrapping tool access. Actuator springs and ground lug

terminals are .704" long by .060" wide.

Wire

Gauge

22 & 24

24

Use with 14B1-A

Wrapping Bit

500131

Wrapping Tool

Sleeve

.020 thru .032

.016

18840

500131

18840

.016 thru .032

26

37006

17611-2

SPECIFYING NOTE: Due to assembly variations containing components

(solder lugs, wire-wrapping terminals, or both), these Jack Panel

Assemblies are available on special order only. Contact Switchcraft.

JACK MATING DATA

NOTE: See tables for jack/plug mating data

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

81

LONG FRAME TELEPHONE JACKS

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" LONG FRAME TELEPHONE JACKS

JACK MATERIALS

SOLDER LUGS TERMINALS – Lugs project out directly

from rear of jack and are solder-coated for easy wiring and

soldering. Offset lugs can be supplied on special order (except

standard on MT-Jax^®). Jacks with offset ground lugs are

particularly suitable for bussing connections on jack

panels. Contact Switchcraft for special order lug requirements.

The complete Switchcraft line of standard size panels,

jacks, plugs, switches and accessories are rugged, premium

quality devices...hand-crafted by experts...100% inspected...

and carefully adjusted to meet the traditionally high quality

demands of the telephone industry and the military. Tightly

controlled incoming inspection, manufacturing methods,

and QC procedures assure you of long-life, reliable components.

Typical applications where Switchcraft components have

been specified for more than five decades are: telephone

central office equipment, switchboards, jackfields, test

and patch panels, and station equipment; TV and radio

broadcasting consoles; PA and communication consoles;

telegraph systems and apparatus; multichannel video and

audio patching; and data processing equipment, such as

computers, telemetry, I/O devices and facsimile.

STRAIGHT

OFFSET

SOLDER LUGS

WIRE-WRAPPING TERMINALS

–

Wire-wrapping

FRAMES – Jack frames are heavy steel, formed and

press welded for added strength. Side member adds to

frame rigidity and resistance to shock and vibration. Both

“A” and “C” type frames can be supplied. (See next page.)

eliminates the need for soldering. Each terminal accepts up to

three wrapped wires (22 or 24 gauge, 5 wraps each), applied

with standard wire-wrapping tools. Terminal base has

standoff shoulder which prevents first wrapped wire from

accidentally sliding down and shorting against another

terminal or adjacent spring. Terminal tips are radiused to facilitate

positioning of wire-wrapping tool over terminals. See page 80 for

wire-wrapping data.

SPRINGS – A special copper alloy is used for leaf springs

because it offers excellent mechanical and electrical

characteristics, and good corrosion resistance. The spring

alloy has special hardness and ductility, and springs are

produced from custom-designed dies. Although normally

adjusted to mate with telephone (and MIL-type) plugs, springs

can be adjusted to mate with commercial phone plugs.

WIRE-WRAPPING

TERMINALS

BUSHINGS – Bushings are copper alloy (except insulated

jacks), drilled to accept either a standard (.250" diameter

finger) plug or a popular smaller (.206" diameter finger)

plug. Series M Hi-D Jax^®have a threaded brass bushing, or a

molded thermoplastic bushing for insulated mounting.

PRINTED CIRCUIT TERMINALS – Components can be

supplied with printed circuit terminals on special order. Terminals

can be specified in various lengths to accommodate different

thicknesses of single and double sided boards, as well as

multilayers, and flat flexible cable and circuitry.

CONTACTS – Jack design includes “wiping” action of

contacts for low resistance connections. The contacts

supplied depend on the jack selected. Gold or silver plating is

normally offered as an option on tip, ring and/or sleeve springs.

Several precious metals and shapes are used on jacks.

PRINTED CIRCUIT

TERMINALS

(SPECIAL)

Material

Shape

Description

Palladium

Welded

Best overall combination of life,

current carrying, and resistance

to environment. Also known as

WEco #2.

Crossbar

OTHERTERMINALS – Many other special terminal styles are

possible. For example, where mounting permits, jacks can be

supplied with stacks having right-angle terminals. Contact

Switchcraft for special terminals.

Fine silver

Riveted,

Carries higher current than

palladium.

button-type

Welded

Gold alloy

Crossbar

Recommended for dry circuit

Excellent resistance to

corrosion and contamination.

Also known as WEco #1.

Heavy currents.

switching.

CUSTOM COMPONENTS

Only the most popular types of jacks are listed.

Fine silver

(Large)

Gold or

Silver

Riveted,

button-type

Plating

For lower contact resistance

(used on through circuit springs).

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

LONG FRAME TELEPHONE JACKS

82

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MT-Jax^®jacks Numbers ◊MT-342B and ◊MT-344B have

shorter bushings, 0.5" long with a hold inside diameter of

.21". They will mate with MIL plug M642/5-1 or M642/8-1.

M642/5-1 plug (Switchcraft 480) cannot be used with

◊MT-342B or ◊MT-344B if these jacks are mounted on standard

.625" thick panels. The short jack bushings are recessed

.125", and the M642/5-1 is too wide to fit in the panel recess.

Use plug M642/8-1 (Switchcraft 484) with a narrower

diameter to fit in the recess and mate properly.

LONG FRAME TELEPHONE JACKS

MT-Jax^®

(“A” Frame)

XMT-Jax^®, Number

XMT-332A

MT-Jax^®

(“C” Frame)

CONTACTS – Contacts on shuts and isolated switching

circuits are welded crossbar palladium. Welded crossbar gold

alloy contacts (WEco #1) are available on special order for dry

circuit applications.

SPECIFICATIONS

Frame and Stack Screws: Plated steel, with iridescent

iridite finish.

Springs: Copper alloy, spring tempered. Solder lugs are tinned.

Bushings: Plated copper alloy standard. Natural brass finish

optional.

Insulation: Rigid plastic spacers (MIL-type PBE-P per

Specification LP-513). One piece molded through stack.

Contacts: Welded crossbar palladium contacts in shunt and

isolated switching circuits are standard. Gold alloy (WEco #1)

and fine silver are available on special order.

WMT-Jax^®, Number

WMT-332B

YMT-Jax^®, Number

YMT-332B

Details of Typical Buss Wiring of Jacks

with Offset Ground Lugs

Ground Lug “Toward”

Frame (Y Offset)

MECHANICAL

Life: Commercial jacks: 10,000 insertion/withdrawal cycles, minimum.

Military Jacks: 20,000 insertion/withdrawal cycles, minimum.

Mechanical Shock: Military Jacks – Per MIL-STD-202,

method 213, Test Condition H (75g).

Buss Wire

Between

Rows

Vibration: Military Jacks – Per MIL-STD-202, method 213, (10-55 Hz).

ELECTRICAL

Buss Wire

Outside of

Rows

Contact Resistance: Commercial Jacks – .030 ohms

maximum (initial), .050 ohms maximum (after humidity, durability

exposure). Military Jacks – .010 ohms maximum (initial), .020

ohms maximum (after life), .10 ohms maximum (after salt spray).

Ground Lug

“Toward” Frame

Ground Lug “Away”

from Frame (X Offset)

Long frame jacks are designed especially for high quality

communication equipment, and to meet exacting MIL

specifications, as well as telephone and communication systems.

Many jacks have WEco equivalent types. MT-Jax^®phone jacks are

offered in four styles: MT-Jax^®, WMT-Jax^®, XMT-Jax^®andYMT-Jax^®.

Rugged steel frames are produced in specially designed dies,

press welded to provide rigidity and dimensional stability required

by telephone and communication jack panels - and to meet MIL

frame strength tests. “A” and “C” frame styles are available.

Insulation Resistance: Commercial Jacks – 10,000 MΩ

minimum (initial), 1,000 MΩ minimum (after humidity). Military

Jacks – 10,000 MΩ minimum (initial), 1,000 MΩ minimum (after

humidity, durability exposure).

Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.

ENVIRONMENTAL

Thermal Range: Commercial Jacks – -55°C to +85°C

(non-operating); -20°C to +65°C (operating). Military Jacks -

-55°C to +85°C (non operating); -40°C to +65°C (operating).

Thermal Shock: Commercial Jacks – Per MIL-STD-202,

method 107. Military Jacks – Per MIL-STD-202, method 107.

Humidity: Commercial Jacks – Per MIL-STD-202, method

106. Military Jacks – 0% to 95% operating and non-operating.

Salt Spray: Commercial Jacks – Per MIL-STD-202, method

101. Military Jacks – Per MIL-STD-202, method 101 (48 hours).

Moisture Resistance: Military Jacks – Per MIL-STD-202,

method 106 (240 hours).

TERMINALS – Solder Lug: All MT-Jax^®have solder lug termi-

nals. Wire-Wrapping Terminals: WMT-Jax^®have wire-wrapping ter-

minals. Offset Ground Lugs: XMT-Jax^®and YMT-Jax^®have ground

lugs, which simplify production line wiring time. A single row of

jacks can be installed with a single buss wire connected to all

ground lugs in a row, or when double rows are mounted on .625"

vertical centers with lugs oriented between rows, holes in ground

lugs line up so a single buss wire provides connections for both

rows. XMT-Jax^®have ground lugs oriented away andYMT-Jax^®are

oriented toward jack frame. See illustration.

ORDERING – Order jacks by part number. Additional variations

in jacks are available on special order. Special circuitry, frames,

contacts, natural brass bushings, as other terminals are available.

MIL STANDARDIZATION – MIL jack types listed have been

adjusted for use with plugs specified in Amendment No.1, MIL-P-642,

usually M642/1-1, M642/1-2, M642/2-1, M642/2-2, M642/4-1 or

M642/4-2. When applicable, specify the plug you will use; we will

adjust with that plug where the item is not a MIL-type. NOTE:

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

LONG FRAME TELEPHONE JACKS

83

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" LONG FRAME TELEPHONE JACKS

®

MT-JAX (with WEco Equivalent Jacks)²

Sche- Dim. “X”

matic maximum

Circuit* Inch (mm)

Sche- Dim. “X”

matic maximum

Circuit* Inch (mm)

Switchcraft

Part Number

WEco

Equiv.

MIL

Type1

Mating

Plug3

Switchcraft

Part Number

WEco

Equiv.

MIL

Type¹

Mating

Plug³

2-CONDUCTOR 2

3-CONDUCTOR

IV

MT331

233A,

221E3

223C

223AM

223CM

232A,

544A4

232C

218A

218C

303A

215A

215C

237A

237C

225A,

234A

225C,

234C

216A

216C,

484C5

217A

217C

226A

226C

236A

236C

438A

438C

411A

411C

394C

218J

MT332B

238A

M641/3-1

.562 (14.3)

.562(14.3)

.562 (14.3)

.578 (14.7)

.562 (14.3)

.625 (15.9)

.688 (17.5)

.688 17.5)

.75 (19.0)

M641/2-8

I

.438 (11.1)

◊CMT332B

WMT332B

◊WCMT332B

MT333B

238C

–

IV

◊CMT331

◊WMT331

◊WCMT331

◊MT332

–

238AM

238CM

300A

–

IV

–

IV

–

VII

◊MT334B

239A

M641/3-2

XII

–

II

.5 (12.7)

◊CMT334-B

WMT334B

◊WCMT334B

◊MT336

239C

–

XII

◊CMT332

MT332A

–

II

.5 (12.7)

239AM

239CM

241A

–

XII

M641/2-3

III

XVIII

V

.5 (12.7)

–

XII

◊CMT332A

◊MT332C

MT333

–

.5 (12.7)

M641/3-4

XX

M641/2-1

.562 (14.3)

.469 (11.9)

.625 (15.9)

◊CMT336

241C

–

XX

M641/2-6

◊WMT336¹⁰

◊WCMT336

◊MT336A¹⁰

◊CMT336A

◊WMT336A

◊WCMT336A

◊MT336B¹⁰

◊CMT336B

MT336C¹⁰

241AM

241CM

242A

–

XX

◊CMT333

◊MT333E

◊CMT333A

MT334A

–

V

–

XX

M642/2-1

or

IX

M641/5-5

XIV

XXI

XXII

XXXI

XXXII

XXVII

IV

M642/4-1

M642/4-2

or

242C

–

M642/2-2

242AM

242CM

285A

–

XI

.562 (14.3)

–

.75 (19.0)

M642/4-3

◊CMT334A

M641/3-6

.812 (20.6)

.688 (17.5)

.75 (19.0)

–

XI

.562 (14.3)

.625 (15.9)

285C

–

MT334C

◊CMT334C

M641/2-5

XVII

240A

M641/3-3

◊CMT336C

◊WMT336C¹⁰

◊WCMT336C

◊MT336D¹⁰

◊CMT336D

◊WMT336D¹⁰

◊WCMT336D

◊MT338

◊CMT338

◊MT339¹⁰

◊CMT339

◊MT342B

240C

–

XVII

XXV

XIX

.625 (15.9)

.562 (14.3)

.75 (19.0)

.812 (20.6)

.5 (12.7)

240AM

240CM

280A

–

MT334E

◊CMT334E

◊MT334F

◊CMT334F

◊MT335

◊CMT335

◊MT336E¹⁰

CMT336E

◊MT337¹⁰

◊CMT337

◊CMT351C

◊MT352A

◊CMT354F

M641/2-7

–

.75 (19.0)

–

.75 (19.0)

M641/2-4

280C

–

.75 (19.0)

–

XIX

280AM

280CM

267A

–

.938 (23.8)

.562 (14.3)

.967 (24.6)

.563 (14.3)

–

XIII

–

XIII

–

XXIII

XXIV

XXXIII

III

267C

–

M641/1-2

284A6

384C6

246A

M641/3-7

M641/2-9

–

M641/1-1

M642/5-1

–

361C

XXXIV

.75 (19.0)

MT-JAX (WITH WECO EQUIVALENT JACKS)²

*Refer to page 79 and 80 for schematics.

Sche- Dim. “X”

matic maximum

Circuit* Inch (mm)

◊ Special order only; contact Switchcraft.

Switchcraft

Part Number

WEco

Equiv.

MIL

Type¹

Mating

Plug³

1. Many jacks are offered with MIL specifications. Other jacks are made of

MIL-spec materials but do not have MIL approval because no MIL type

numbers have been assigned.

3-CONDUCTOR 2

2. MT-Jax have nickel-plated copper alloy bushing. WEco equivalent jacks

have plain copper alloy bushings (except WEco Number 221E, which

has nickel-plated copper alloy bushing).

◊WMT342B

MT344B

246 AM

248A

249A

249C

248E

243C

245A

245C

363A

290C

326C

–

IV

.562 (14.3)

.625 (15.9)

.562 (14.3)

.625 (15.9)

.812 (20.6)10

.938 (23.8)10

.938 (23.8)

XII

M642/5-1

◊MT346

XX

3. Mating plugs and patch cords are contained in the catalog.

4. Adjust non-short tip-ring.

◊CMT346

◊MT354B

◊MT355¹⁰

◊MT356C¹⁰

◊CMT356C

◊MT357¹⁰

◊CMT358

◊CMT359

XX

XII

5. Adjusted for plug M642/1-1 or M642/1-2.

6. Actuates differently (insulated “A” off ring instead of tip).

7. Same as MIL type M641/2-3 except with offset ground lug.

8. Same as MIL type M641/3-1 except with offset ground lug.

9. Same as MIL type M641/3-2 except with offset ground lug.

XXXV

XXXVI

M642/5-1

or

M642/2-2

XXXVII .75 (19.0)10

XXXVIII .875 (22.2)

10. When mounted on “A” frames, stacks are too high to fit in standard

panels with .625" horizontal space add prefix “C” to part number

to order jacks with “C” frame.

XXXIX

.75 (19.0)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

LONG FRAME TELEPHONE JACKS

84

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MT-JAX^®

(Industry Standard – No WEco Equivalent)

Dim. “X”

maximum

Inch (mm)

Dim. “X”

maximum

Inch (mm)

Switchcraft

Part Number

MIL

matic

Mating

Plug³

Switchcraft

Part Number

MIL

matic

Mating

Plug³

Sche

Type¹

Circuit*

Type¹

Circuit*

2-CONDUCTOR²

3-CONDUCTOR²

◊WMT332A

◊WCMT332A

XMT332A

–

III

.5 (12.7)

XMT332B

◊YMT332B

◊CMT333B

◊WMT333B

XMT334B

◊YMT334B¹⁰

◊WMT336B

◊WCMT336B

◊MT343B

–

IV

.562 (14.3)

.812 (20.6)

.5 (12.7)

–

III

.5 (12.7)

IV

–

III

.5 (12.7)

VII

M642/2-1

or

◊YMT332A

◊CMT332C

◊WMT332C

◊WMT333

–

III

.5 (12.7)

VII

–

XVIII

V

.562 (14.3)

.5 (12.7)

XII

M642/2-2

–

XII

–

.469 (11.9)

.967 (24.6)

.625 (15.9)

.562 (14.3)

.641 (16.3)

.688 (17.5)

.75 (19.0)

.875 (22.2)

.438 (11.1)

XXI

VII

◊WCMT333

◊MT333A

–

V

–

VI

◊WMT333E

◊WMT334A

◊WMT334C

◊WMT334E

◊WMT334F

◊WMT335¹⁰

◊WCMT335

MT335A¹⁰

–

IX

◊CMT342B

◊CMT344B

◊WMT344B

◊MT346A¹⁰

◊MT346B¹⁰

◊MT346C¹⁰

◊CMT346C

IV

.562 (14.3)

.625 (15.9)

.688 (17.5)

.812 (20.6)

.688 (17.5)

M642/4-1

M642/4-2

or

–

XI

XII

M642/5-1

–

XVII

XXV

XIX

XIII

XXVI

XXIII

I

XII

–

XIV

XXI

XXII

M642/4-3

–

M642/5-1

or

–

M642/2-2¹

–

M641/2-2

*Refer to pages 79 and 80.

◊ Special order only; contact Switchcraft.

◊CMT335A

◊WMT335A

◊WCMT335A

◊WMT336E¹⁰

◊WCMT336E

◊CMT341

–

1. Many jacks are offered with MIL specifications. Other jacks

are made of MIL-spec materials but do not have MIL approval

because no MIL type numbers have been assigned.

2. MT-Jax have nickel plated copper alloy bushing. WEco equiv. jacks

have plain copper alloy bushings (except WEco No. 221E, which has

nickel plated copper alloy bushing).

3. Mating plugs and patch cords are contained in this catalog.

7. Same as MIL type M641/2-3 except with offset ground lug.

8. Same as MIL type M641/3-1 except with offset ground lug.

9. Same as MIL type M641/3-2 except with offset ground lug.

10. When mounted on “A” frames, stacks are too high to fit in standard

panes with .625" horizontal space add prefix “C” to part number

to order jacks with “C” frame.

MT-Jax^®, Offset Lugs

MT-Jax^®and WMT-Jax^®

MT-Jax^®,Wire-Wrapping Detail

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

85

LONG FRAME TELEPHONE TWIN JACKS

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" LONG FRAME TELEPHONE TWIN JACKS

SPECIFICATIONS

Frame and Stack Screws: Steel, plated with iridescent

iridite finish.

Springs: Copper alloy, spring tempered. Solder lugs are

solder coated.

Bushings: Nickel-plated copper alloy.

Contacts: Welded crossbar palladium in shunt circuits.

Insulation: Rigid plastic (MIL-type PBE-P, per MIL

Specification LP-513C). Extruded plastic insulating tubing

through stack.

MT389

MT388

ORDERING

Order by part number from table.

Part

Dim. “X” max.

Inch (mm)

WMT389

Number¹

Adjusted for Plug

MT388

WEco types 298B and 347B

.562 (14.3)

MIL types M642/9-1 and M642/1-1

◊WMT388 Switchcraft types 411, 412, 413, 420

.562 (14.3)

.594 (15.1)

MT389

WEco type 310

High quality telephone jacks are essentially doubled versions

of MT-Jax^®. Twin-Jax^®are used in Switchcraft Series 2400,

2600 and JP^®Jack Panels and other standard jack panels.

Twin-Jax^®have direct WEco equivalents.

MIL types M642/2-1 and M642/2-2

WMT389

Switchcraft types 414 and 482

.562 (14.3)

◊ Special Order only; contact Switchcraft.

1. Number MT388 is equivalent to MIL-type M641/11-1

2. Complete data for telephone and MIL-type plugs are contained in this section.

Mounting Screws: #6-32, Part Number P10725, can be ordered separately.

Contact Switchcraft. (Screws not supplied with jacks).

MT388 AND WMT388

Frame mounting ears are on 1.375" centers, and bushings

are on .625" centers. Jacks are double, 2-conductor type with

a crossover wiring feature. If a mating plug is inserted in

either bushing, crossover contacts are opened (see

schematic). MT388 (solder lugs) is equivalent to WEco jack

410A, 410C and 410D. WMT388 (wire-wrapping) is equivalent

to WEco 410AM.

SCHEMATIC CIRCUITS

MT389 AND WMT389

Double, 3-conductor jacks with both the tip and ring circuits

interconnected (crossover wired) so if a plug is inserted in

either jack, common circuits are opened (see schematic).

MT-389 (solder lugs) is equivalent to WEco 482A. WMT389

(wire-wrapping) is equivalent to WEco 482AM and 482BM.

MT388 and

WMT388

MT389 and WMT389

MT388 and WMT388

MT389 and WMT389

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

JACK BLOCKS

86

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" JACK BLOCKS

DUAL-JAX BLOCK^®

ORDERING

Order by part number from table.

Part Number

2300

Description

Block, without jacks.

2331

Two, MT331 MT-Jax installed.

Two, MT332A MT-Jax installed.

Two, MT332B MT-Jax installed.

Two, MT333 MT-Jax installed.

2332A

2332B

◊2333

◊ Special order only; contact Switchcraft for price and delivery.

Mounting Screws: #6-20, P1544, can be ordered separately,

contact Switchcraft.

Dual-Jax Blocks are ideal where limited jack connections are

needed but larger jack panels are not required. Designed for

broadcasting, intercom and PA systems, switchboards, and

commercial, industrial and military communications equipment.

Dual-Jax Blocks mount in panels or chassis, either singularly

or in multiples. Four countersunk holes accommodate four

#8-32 screws (not supplied) for block mounting. Blocks can be

supplied without jacks, or with MT-Jax^®installed. Many other

jacks including, T-Jax^®, T-Switch^®switches and lamp jacks can

be installed. Jacks with wire-wrapping terminals or offset lugs

can also be supplied. By drilling additional holes, Twin-Jax^®

may also be used. Contact Switchcraft for any special order items.

SPECIFICATIONS

SERIES 2300

Block: Molded black thermoplastic.

Screws: #6-20 plated steel, QQ-P-416, Type II,

Class 2 (for jack mounting).

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

BANTAM TYPE^®JACKS

87

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TELEPHONE JACKS BANTAM TYPE^®

WTT636C

TT36

TT32BDC

TT36FM

THREADED BUSHING

STEEL FRAME

DIE-CAST FRAME

(special order only)

FRONT MOUNT

SWITCHCRAFT VS. MIL NUMBERS

FEATURES

• Steel (standard) or die-cast frames (special order).

• 2-or 3-conductors.

• Palladium crossbar welded contacts are standard in

switching circuits. Fine silver or gold alloy contacts are

available on special order.

• Series TT30, TT30FM and TT600 - solder lugs; Series

WTT-30, WTT30FM and WTT600FM -wire-wrapping terminals.

Bussing solder lugs are available on special order.

• Series TT30 and WTT30 jacks mounts in Series 1600,

A1600, B1600 and C1600 jacks panels.

• Series TT30FM and WTT30FM jacks mount in Series

TT51, TT52, TT55 and TT56 jack panels.

• Series TT600 and WTT600 jacks mount in .25" diameter

holes in panels up to .281" thick. Mounting centers: .438".

• Add “N” for nickel-plated frame and “Y” or for offset solder lugs.

Jack Number

TT32B

MIL Spec. Number

641/19-2

641/19-6

641/19-4

641/19-8

641/19-10

641/19-1

641/19-5

641/19-3

641/19-7

641/19-9

TT32BFM

TT34B

TT34BFM

TT36C

WTT32B

WTT32BFM

WTT34B

WTT34BFM

WTT36C

Part Numbers, Jack with Solder Lugs

Dim. “X”

Max.

Typical

Mating

Series TT30

Series TT30FM

Series TT600

Steel

Schem.¹In (mm)²Cond. Plug³

Steel

Die Cast

◊TT31DC

◊TT32ADC

◊TT32BDC

Steel

TT31FM

Die Cast

◊TT31FMDC

TT31

TT32A

TT32B

TT32C

TT33

◊TT33B

TT34A

TT34B

TT34C

TT34F

TT35

TT631

I

III

IV

XVIII

V

VII

XI

XII

XVII

XIX

XIII

XX

XIV

XXI

XXII

.422 (10.7)

.406 (10.3)

.578 (14.68)

.422 (10.7)

.578 (14.7)

.484 (12.3)

.547 (13.9)

.578 (14.68)

.547 (13.9)

.609 (15.5)

.625 (15.9)

.703 (17.9)

.625 (15.9)

2

3

2

3

2

3

2

3

TT251

TT253

TT251

TT253

TT251

TT253

TT251

TT253

TT32AFM ◊TT32AFMDC

TT32BFM ◊TT32BFMDC

TT632A

◊TT632B

◊TT632C

◊TT633

◊TT633B

◊TT634A

TT634B

◊TT634C

–

◊TT635

◊TT636

TT636A

–

◊TT32CDC ◊TT32CFM ◊TT32CFMDC

◊TT33DC TT33FM ◊TT33FMDC

◊TT33BDC ◊TT33BFM ◊TT33BFMDC

◊TT34ADC ◊TT34AFM ◊TT34AFMDC

◊TT34BDC

◊TT34CDC

◊TT34FDC

◊TT35DC

TT34BFM ◊TT34BFMDC

TT34CFM ◊TT34CFMDC

–

◊TT35FM

◊TT36FM

◊TT35FMDC

◊TT36FMDC

TT36

◊TT36DC

TT36A

TT36B

TT36C

◊TT36ADC

◊TT36BDC

◊TT36CDC

TT36AFM ◊TT36AFMDC

–

TT36CFM ◊TT36CFMDC

◊TT636C

Part Numbers, Jack with Wire Wrapping Terminals

Series WTT30 Series WTT30FM Series WTT600

Dim. “X”

Max.

Typical

Mating

Steel

WTT31

Die Cast

◊WTT31DC

Steel

WTT31FM

Die Cast

◊WTT31FMDC

Steel

WTT631

Schem.¹In (mm)²Cond. Plug³

I

III

.422 (10.7)

.406 (10.3)

.578 (14.68)

.422 (10.7)

.578 (14.7)

.484 (12.3)

.547 (13.9)

.578 (14.68)

.547 (13.9)

.609 (15.5)

.625 (15.9)

2

3

2

3

2

3

2

3

TT251

TT253

TT251

TT253

TT251

TT253

TT251

TT253

WTT32A ◊WTT32ADC WTT32AFM ◊WTT32AFMDC

WTT32B ◊WTT32BDC WTT32BFM ◊WTT32BFMDC

◊WTT32C ◊WTT32CDC ◊WTT32CFM ◊WTT32CFMDC

WTT632A

WTT632B

◊WTT632C

◊WTT633

◊WTT633B

◊WTT634A

WTT634B

◊WTT634C

◊WTT635

◊WTT636

◊WTT636A

◊WTT636C

IV

XVIII

V

WTT33

◊WTT33DC

WTT33FM

◊WTT33FMDC

◊WTT33B ◊WTT33BDC ◊WTT33BFM ◊WTT33BFMDC

◊WTT34A ◊WTT34ADC ◊WTT34AFM ◊WTT34AFMDC

WTT34B ◊WTT34BDC WTT34BFM ◊WTT34BFMDC

VII

XI

XII

–

XVII

XIII

XX

XIV

XXII

◊WTT35

◊WTT36

◊WTT35DC ◊WTT35FM

◊WTT36DC ◊WTT36FM

◊WTT35FMDC

◊WTT36FMDC

◊WTT36A ◊WTT36ADC ◊WTT36AFM ◊WTT36AFMDC

WTT36C ◊WTT36CDC WTT36CFM ◊WTT36CFMDC

◊ Special order only.

1. See schematic diagrams.

2. “X” dimension of die cast frame jacks may be slightly greater.

3. See Mating Plugs Section.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

BANTAM TYPE^®JACKS

88

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TELEPHONE JACKS BANTAM TYPE^®

SPECIFICATIONS

MOUNTING HARDWARE

Frame: Plated (steel or zinc diecast).

Stack Screws: Steel plated.

Bushing: Plated (brass or steel).

Tip and Ring Springs: Copper alloy.

Contact Spring: Copper alloy.

Contacts: Welded crossbar palladium. Other alloys in

various sizes available on special order.

Insulation: Rigid plastic with plastic tubing through

stack assembly.

Series TT30: #3-48 x 1/4"; mounting screws, P10834,

can be ordered separately.

Series TT30FM: Supplied with one #3-48 x 1⁄4" fil.

head machine screw, steel-plated.

Series TT600: Supplied with one P1975, nickel-plated cop-

per alloy locknut, and one S3997, steel, nickel-plated wash-

er.

NOTE: Dimensional drawings show panels with steel frame

jacks. Overall dimensions for steel or die-cast frame jacks

are the same, except as noted.

2-17/32

[64.3]

REF

0.375

[9.5]

REF

B0.115

[2.9]

REF

0.780 5.015

[19.8]

REF

0.281

[7.1]

REF

0.250

[6.4]

REF

0.590 5.015

[14.9]

REF

B0.251

[6.4]

REF

0.650

[16.51]

REF

B0.176

[4.46]

REF

0.035

[.79]

REF

0.279

[7.1]

REF

Series TT32B

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

BANTAM TYPE^®JACKS

89

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TELEPHONE TWIN JACKS BANTAM TYPE^®

FEATURES

SPECIFICATIONS

• Steel or die-cast frames. (Special order only).

Frame: Plated (steel or diecast zinc).

Stack Screws: Steel-plated.

Bushing: Plated (steel or copper alloy).

Tip, Ring and Contact Springs: Copper alloy.

Contacts: Welded crossbar palladium. Other alloys in

various sizes available on special order.

• Twin, 3-conductor jacks on .312" centers, inter-connected

so circuit is opened when a mating plug is inserted in one

side of the jack. Palladium welded crossbar contacts are

standard in switching circuits.

• Solder lugs or wire-wrapping terminals.

• TT89, TT89C, WTT89 and WTT89DC jacks mount in

Series 1700 jack panels.

• TT89FM, TT89FMDC, WTT89FM and WTT89FMDC

jacks mount in Series TT59, TT60, TT61 and TT62

jack panels.

Insulation: Rigid plastic with plastic tubing through

stack assembly.

Mounting Hardware: #3-48 x 1/4" mounting

screws, P10834, can be ordered separately for TT89,

TT89DC, WTT89 and WTT89DC jacks. Two mounting

screws, P25424, are supplied with TT89FM, TT89MDC,

WTTFM and WTT89FMDC jacks.

NOTE: Dimensional drawings show panels with steel

frame jacks. Overall dimensions for steel or die-cast

frame jacks are the same.

TT89

SCHEMATIC

Solder Lugs

Wire-Wrapping Terminals

Typical Mating

Steel

TT89

Die Cast

TT89DC

Steel

WTT89

WTT89FM

Die Cast

WTT89DC

Conductors

Plug¹

TT263

◊

Twin

3-conductor

TT89FM

◊

TT89FMDC

WTT89FMDC

1. See Mating Plugs Section.

◊ Special order only

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

90 ^{BANTAM TYPE}^®^JACKS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TELEPHONE TRIPLE JACKS BANTAM TYPE^®

FEATURES

• Steel or die-cast frames.

• TT95 Tri-Jax^®Jacks: three, 3-conductor jacks on one

frame. Twin jacks, (on .312" centers, LINE & EQUIPMENT

functions), have strapped shunts installed. The third jack

(MONITOR) is unwired. See TT95 schematic.

• TT96 Tri-Jax Jacks: Same as TT95 jacks, except third

jack (MONITOR) has tip and ring springs, respectively,

TT95 SCHEMATIC

jumpered to tip and ring springs of top (LINE) jack.

• Selection of solder lugs or wire-wrapping terminals.

• Palladium welded crossbar contact are standard in

switching circuits.

• TT95, TT95DC, WTT95 and WTT95DC jacks mount in

Series B1700 jack panels.

• TT95FM, TT95FMDC, TT96FM, TT96FMDC and

wire-wrapping versions mount in Series TT53, TT54,

TT57 and TT58 jack panels.

TT96 SCHEMATIC

TT95 TT95FM TT96FM

TT95DC TT95FMDC TT96FMDC

WTT95 WTT95FM WTT96FM

WTT95DC WTT95FMDC WTT96FMDC

TT253 TT263

◊ Special order only

Mounting Hardware: #3-48 x 1/4" mounting screws,

P10834, can be ordered separately for rear mount jacks.

Two mounting screws, P25424, are supplied with front

mount jacks.

SPECIFICATIONS

Frame: Plated (steel or diecast)

Stack Screws: Stainless Steel Plated.

Bushings: Plated (steel or copper alloy).

Contact Springs: Copper alloy.

Contacts: Welded crossbar palladium. Other precious metal

alloys in various sizes available on special order.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{MINIATURE TELEPHONE JACKS}91

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT

RTT34B02

COVER P286302

CLOSE-UP OF

“Snap-In”

TERMINAL

LOW SILHOUETTE

PERMITS CRITICAL

SPACE-SAVING HIGH

RTT8702

DENSITY PACKAGING

COVER P286402

ORDERING INFORMATION

Right-angle miniature phone jacks provide low-profile

packaging. Single and twin 3-conductor jacks provide

plug-jack access to communication circuits for patching

and/or testing. Tips and rings are shunted. These jacks

mate with Switchcraft miniature TT^®plugs and patch cords.

Jack

Cover

Typical

Part No.

Color

Schem.

Cond. Mating Plug²

RTT34B01 ◊P286301

RTT34B02 P286302

RTT34B04 ◊P286304

RTT34B05 P286305

Red

Black

Blue

Jacks are designed for right-angle mounting on .062"

(1.6 mm) maximum thickness PC boards. Snap-on covers in

colors are available and can be installed or removed in the

field without special tools. Covers and jacks may be

ordered in different colors for color coded circuits.

XII

3

TT-253

White

◊RTT34B07 ◊P286307 Orange

◊RTT34B08 ◊P286308

Yellow

SPECIFICATIONS

ELECTRICAL

Dielectric Withstanding Voltage: 500 V AC

Contact Resistance: .020 Ω maximum (initial),

.030 Ω maximum (after life test).

Insulation Resistance: 10¹⁰Ω at 500 V DC (initial).

RTT8701

RTT8702

RTT8704

RTT8705

◊RTT8707

◊RTT8708

◊P286401

P286402

◊P286404

P286405

Red

Black

Blue

Twin

XII

Twin

3

TT-263

White

◊P286407 Orange

◊P286408 Yellow

MECHANICAL

1. See schematic diagrams on pages 79 and 80.

2. See Mating Plugs Section.

◊ Special order only; contact Switchcraft for price and delivery.

Shock: MIL-STD 202 Method 213.

Vibration: MIL-STD 202 Method 201.

Insertion Force: 7 pounds maximum (31.14 N).

Withdrawal Force: 1.5 pounds minimum (6.67 N).

Life: 10,000 cycles.

ORDERING

1. Order jacks and covers separately from table.

2. Covers can be ordered assembled on special order.

3. To order RTT jack with cover installed, add the letter C

after RTT in part number. Special order only.

4. To order RTT jack with Snap-in terminals, add the

letter S to the end of the part number. Special order only.

5. For all special orders items, contact Switchcraft.

MATERIALS

Housing: Thermoplastic UL 94V-0.

Springs: Copper alloy, plated.

Contacts: Gold alloy (WEco #1) crossbar.

ENVIRONMENTAL

Temperature Limits: -55°C to +85°C

(non-operating).

RTT JACK PART NUMBERING SYSTEM

Thermal Shock: MIL-STD 202 Method 107.

Salt Spray: MIL-STD 202 Method 101.

Humidity: MIL-STD 202 Method 106, less

steps 7A and 7B.

Series

Cover Option

Circuitry

Jack Color

RTT Right

Angle TT Jack

Blank- No Cover

Standard

34B-

XII

01-

02-

Red

Two XII

Circuits

C-

Cover Supplied 87-

Black

04-

05-

07-

08-

Blue

White

Orange

Yellow

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

92

MINIATURE TELEPHONE JACKS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT (continued)

RECOMMENDED

PCBOARD LAYOUT

No. RTT34B (Less cover)

No. P2863 Cover

No. RTT87 (Less cover)

RECOMMENDED

PC BOARD LAYOUT

No. P2864 Cover

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{ENCLOSED JACKS}93

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

.177" ENCLOSED JACKS

Two- and 3-conductor Unijax^®jacks have advanced features

of Hi-D Jax^®jacks including chassis/panel and PC mounting

and .177" bushing that mates with a variety of tini-telephone^®

plugs and patchcords. Bushing diameter is .281" inside

diameter; panel thickness is .125". Mounts in rows or arrays

on .469" centers.

UJ4B

SPECIFICATIONS

MECHANICAL

Insertion/Withdrawal: 2-conductor, 1.25 pounds nominal,

3 pounds maximum insertion. 3-conductor, 1.5 pounds nominal,

3 pounds maximum insertion. 2-conductor, 3 pounds nominal,

1.5 pounds minimum withdrawal. 3-conductor, 3 pound nominal,

1.5 pounds minimum withdrawal.

Life: 10,000 insertion/withdrawal cycles minimum.

ELECTRICAL

Contact Resistance: .10 ohms maximum.

Insulation Resistance: 1,000 MΩ minimum.

Dielectric Withstanding Voltage: 500 V AC maximum.

MATERIAL

Housing: Thermoplastic.

Mounting Bushing: Nickel-plated copper alloy.

Tip and Ring Springs: Copper alloy, silver-plated.

Integral contacts.

Shunt Springs: Copper alloy, silver-plated

integral contacts.

Sleeve Terminal: Steel, tin-plated.

Hardware: Supplied with one, Number P2060

nickel-plated copper alloy locknut, and one,

Number P2061 nickel-plated copper alloy washer.

TWO CONDUCTOR PART NUMBERS

Jack

Typical

Mating

Plug²

Part

Number

Schematic¹

Description

I

Open circuit

UJ1

TT251

III

Single closed circuit

UJ2A

THREE CONDUCTOR PART NUMBERS

TT253

UJ2B

UJ4B

Double Open circuit

Double closed circuit

IV

XII

1. See jack schematics on pages 79 and 80.

2. See Mating Plugs Section.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

94 ^LITTEL-JAX^®2- AND 3- CONDUCTOR

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PREFIX OPTIONS

SERIES

1-Littel Jax^®

CIRCUITRY

1-

1/4" PHONE JACKS

Blank- 1/4" Commercial Jack

I

C-

Accepts Mill Plug

2A- III

2B- IV

PC-12A

14B

FA-

FAL-

.205" Faston Terminals

and .375" Long Bushing

3-

V

L-

.375" Long Bushing

PC Terminals

3A- VI

3B- VII

3E- IX

4B- XII

PC-

S-

Accepts .206 Diameter Plugs

TWO CONDUCTOR PART NUMBERS

11

FAL-11

Typical

Mating

Plug

.205 FASTON

TERMINAL

Jack

Part

Schematic¹

Number

Description

Open circuit

LITTEL-JAX^®COMMERCIAL PHONE JACKS

2- AND 3-CONDUCTOR

I

250

440

250

11

C11

MIL Number M641/6-1

Littel-Jax phone jacks mate with standard commercial phone

plugs and are available with .25" and .21" inside diameter

bushings.

FA11

FAL11

.205 inch FASTON terminal

.375 inch long bushing

.205 FASTON terminal

I

250

440

250

L11

.375 inch long bushing

Tip shunt

MIL LITTEL-JAX^®PHONE JACKS

2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)

MIL jacks mate with MIL-type phone plugs with .25" (6.35mm)

or .21" (5.34mm) diameter bushings. Numbers C11 and C12B

have a non-turn locating pin which keys the jack to the

mounting surface. For low contact resistance applications,

jack number C12A has fine silver contacts on shunts and

tip springs.

III

V

12A

C12A

L12A

MILNumber M641/12-1

.375 inch long bushing

PC12A PC board mount

13

Isolated “make” circuit

Transfer circuit

VI

IX

13A

13E

Isolated “break” circuit

MOUNTING

Chassis/Panel: See Mounting Data drawing below;

smallhole is required only for jacks numbers C11 and C12B

with non-turn locating pin.

Maximum Panel Thickness: .156" (4mm) for standard

.276" (7mm) long bushing; .25" (6.35mm) for .375" (9.5mm)

long bushing.

NOTE: For panels thicker than .25" see Thick Panel Phone Jax.

Insulated Mount: See drawing. S1028 flatwasher and

Part Number S1029 shoulder washer must be ordered

separately for mounting in .437" diameter hole.

NOTE: See Hi-D Jax^®for jack specifically designed for

insulated mounting without additional washers.

PC Board Mounting: See Recommended PC Board Layout

drawing below for jacks with PC terminals. Recommended

PC board thickness is .062".

Mounting Centers: 1.188" (30mm) recommended. Centers

may vary with jack selected, for example, Number

11 mounts on .813" (20.6mm) and 14B mounts on

1.125" (28.6mm) minimum centers.

THREE CONDUCTOR PART NUMBERS

12B

Double open circuit

IV

267

L12B

C12B

.375 inch long bushing

MIL number M641/5-1,

.250 inch inside diameter

IV

VII

XII

480

267

13B

14B

Tip shunt

Double closed circuit

PART NUMBERS

(.210" INSIDE DIAMETER BUSHING)

S11

2 conductor

3 conductor

I

S250

S267

S12A

S12B

S13B

III

IV

VII

1. Refer to jack schematics on pages 79 and 80. Other circuits are available;

contact factory.

STEREO JACK

CONNECTIONS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^LITTEL-JAX^®^{2- AND 3- CONDUCTOR}95

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" PHONE JACKS (continued)

LITTEL-JAX^®COMMERCIAL PHONE JACKS - 2- AND 3-CONDUCTOR AND

MIL LITTEL-JAX^®PHONE JACKS - 2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)

Sleeve Terminal: Copper alloy.

SPECIFICATIONS

Hardware: Supplied with one Number P10001 copper alloy

nickel-plated hex nut, and one Number 51022 steel nickel-plated

washer - except copper alloy nickel-plated washer Number

S10451 supplied on C11, C12A and C12B.

MECHANICAL

Life: Commercial Jacks: 10,000 insertion/withdrawal

cycles, minimum. Military Jacks: 20,000 insertions/

withdrawals, minimum.

*Commercial jacks feature integral contacts. Integral contacts should

not be used where low contact resistance is a requirement.

Mechanical Shock: Military Jacks: Per MIL-STD 202,

method 213, Test Condition H (75g).

Vibration: Military Jacks: Per MIL-STD-202,

method 213, (10-55 Hz).

Littel Jax^®Jacks

Insertion/Withdrawal Forces: (see charts below)

COMMERCIAL JACKS

Plug Diameter (inches)

Insertion (maximum)

Withdrawal (minimum)

.210

7 lb.

1 lb.

.250

7 lb.

1 lb.

MILITARY JACKS

Part Number

Insertion (maximum)

Withdrawal (minimum)

Withdrawal (maximum)

C11

C12A

7 lb.

3 lb.

7 lb.

C12B

6 lb.

2 lb.

7 lb.

1.5 lb.

5 lb.

11, L-11, C-11, S-11

*.276" for No. FA-11

FA-11, FAL-11

S-12A, SC-12A

12 12-A, L-12A

S-12A, SC-12A

12A, L-12A

ELECTRICAL

Contact Resistance: Commercial Jacks - .030 ohms

maximum (initial), .050 ohms maximum (after humidity,

durability exposure). Per MIL-STD-202E. Military Jacks -

.010 ohms maximum (initial), .020 ohms maximum (after life),

.10 ohms maximum (after salt spray).

Insulation Resistance: Commercial Jacks - 10,000 MΩ

minimum (initial), 1,000 MΩ minimum (after humidity). Military

Jacks - 10,000 MΩ minimum (initial), 1,000 MΩ minimum

(after humidity, durability exposure).

Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.

Contact Rating: 1 A, 25 V DC.

PC-12A

12B, C12B

S-12B, SC-12B

13

13A

ENVIRONMENTAL

Thermal Range: Commercial Jacks; -55°C to +85°C

(non-operating); -20°C to +65°C (operating). Military Jacks; -

55°C to +85°C (non-operating); -40°C to+65°C (operating).

Thermal Shock: Commercial Jacks - Per MIL-STD 202,

method 107. Military Jacks - Per MIL-STD 202, method 107.

Humidity: Commercial Jacks - Per MIL-STD 202, method

106. Military Jacks - 0% to 95% operating and non-operating.

Salt Spray: Commercial Jacks - Per MIL-STD 202, method

101. Military Jacks - Per MIL-STD 202, method 101 (48 hours).

Moisture Resistance: Military Jacks - Per MIL-STD 202,

method 106 (240 hours).

13B, S-13B

13E

14B

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Insulation: Rigid plastic.

Springs: Special copper alloy. Integral contacts are standard

in the isolated switching circuits; fine silver contacts

in C12A switching circuit.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

96 ^{ENCLOSED JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" ENCLOSED TELEPHONE JACKS

Series M11*

Series MNS11*

Series MS11*

Series MN11*

Compactly constructed jacks permit direct cross-patching

with Switchcraft, WEco and MIL-type telephone plugs and

patch cords. Series M Hi-D Jax^®offer a choice of solder lugs

or PC terminals. Both insulated and metal bushings can be

specified, as well as .21" inside diameter sleeves for narrow

plug fingers. Maximum contact resistance is .1 ohm. Springs

are made of a special gold-plated copper alloy. Welded cross

bar gold alloy contacts are available on special order.

MECHANICAL

Life: 10,000 insertion/withdrawal cycles, minimum.

Insertion/Withdrawal Forces: Nominal plug retention on

2-conductor jack is .75 pounds with .5 pounds minimum.

Nominal plug retention on 3-conductor jack is 2 pounds with

1.5 pounds minimum. With double tips, the nominal is

1.5 pounds and 1 pound minimum.

Maximum Recommended Mounting Torque: 6" -lb. for

thermoplastic bushing.

Mounting Torque (for Spring Lock PC Terminal):

8" -pound for thermoplastic bushings.

SERIES M-11* HI-D JAX^®

Two- and 3-conductor type mate with .25" diameter finger

plugs. Tip and ring springs are gold-plated. Shunts (if used)

have welded crossbar palladium contacts. Ring springs

(where used with shunts) have welded crossbar palladium

contacts. Tip springs (when used) do not have a contact

welded to the spring. Bushing has 3/8-32-NEF-2 thread;

locknut and flat washer for mounting are supplied.

ELECTRICAL

Contact Resistance: .020 ohms maximum (initial),

.050 ohms maximum (after humidity, durability exposure).

Per MIL-STD-202E.

Insulation Resistance: 10,000 MΩ minimum (initial),

1,000 MΩ minimum (after humidity).

SERIES MN-11* HI-D JAX^®

Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.

Contact Rating: 0.25, 48 VDC make and break, 3A carry only.

Same as Series M-11* except threaded bushing is molded

thermoplastic for insulated mounting. Continuous sleeve

contact assures positive sleeve connection without exposed

metal on front of panel.

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

SERIES M113 AND M114 HI-D JAX^®

Thermal Shock: Per MIL-STD 202, method 107.

Humidity: Per MIL-STD 202, method 106.

Salt Spray: Per MIL-STD 202, method 101.

The versatile 3-conductor M113 and M114 feature springs

which accept a wide variety of 1/4" plug designs. Self-aligning

PC terminals allow for easier insertion into a printed circuit

board. Also feature a metric thread mounting.

SPECIFICATIONS

MATERIALS

Mounting Bushing: Series M11*, MS11* - Nickel-plated

copper alloy. Series MN11*, MNS11* - Molded thermoplastic.

Housing: Molded thermoplastic, UL 94V-0.

Springs: Copper alloy.

Contacts (mil-type): Tip and Ring Springs are gold-plated.

Shuntsprings (where used) are welded crossbar palladium.

Welded crossbar gold alloy contacts are available on

special order.

Contacts (commercial): Tin-plated integral contacts.

Sleeve Terminal: Steel, tin-plated.

Hardware: Supplied with one P10001 copper alloy,

nickel-plated locknut and one S10221 steel,

nickel-plated washer.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{ENCLOSED JACKS}97

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" ENCLOSED TELEPHONE JACKS (CONTINUED)

SERIES MS11* HI-D JAX^®

ORDERING INFORMATION

3-conductor with .21" inside diameter sleeve. Mates with plugs

having .206" diameter finger. Protects against accidental

insertion of .25" diameter finger plugs. Gold-plated tip and

ring springs. Welded crossbar palladium contacts on shunt

springs standard. Bushing has 3/8-32-NEF-2 thread; locknut

and flat washer for mounting are supplied.

◊SERIES MNS11* HI-D JAX^®

Same as Series MS11* except bushing is molded

thermoplastic.

Order by part number from table.

2-CONDUCTOR

Part

Typical

Sche- Mating

matic** Plug*

Number

Solder Lugs PC Terms

Description

.25" I.D. sleeve,

metal bushing.

–

.25 inch I.D. sleeve,

^M1M¹¹111 MN111

.25" I.D. sleeve,

–

.25 inch I.D. sleeve,

I

^MNM¹¹¹112A

molded thermoplastic

bushing.

M112APC

◊TWIN M11* HI-D JAX^®

.25" I.D. sleeve,

◊M112A

.25 inch I.D. sleeve,

MN11^◊2^MA^112APC

metal bushing.

Two Series M11* Hi-D Jax strapped on .625" centers. Mates

with Switchcraft^®Twin Plugs. 411, 412 and 413. MIL-type

Littel-Plug^®phone plugs, 420, 430 and 440 (2-conductor)

and 482 and 483 (3-conductor) are also recommended for

mating with this series.

.25" I.D. sleeve,

◊MN112APC .25 inch I.D. sleeve,

III

420

^MNM¹¹²N^A112APC

molded thermoplastic

bushing.

M113E

.25" I.D. sleeve,

M113E

.25 inch I.D. sleeve,

MN113E^–

metal bushing.

.25" I.D. sleeve,

.25 inch I.D. sleeve,

MN113E

–

IX

molded thermoplastic

bushing.

◊ Special Order only; contact Switchcraft.

* Other mating plugs are contained in this plug section.

** See pages 79 and 80.

3-CONDUCTOR

Part

Number

Part

Number

Typical

Part

Number

Solder Lugs PC Terms

Part

Number

Typical

Sche- Mating

matic¹Plug²

Sche- Mating

1

_SolderM_Lug1_s12_PB_{C T}M_ermL_s112B MN112B M113B

Description

.25 inch I.D. sleeve,

.375 inch long

matic

Plug²

Description

MNL113B

MN113B^–M112BPC MN112BPC

M112B

⋅ M112BPC .25" inch I.D. sleeve,

metal bushing.

482

metal bushing.

MN113BPC M113PPC1M

ML112B

–

.25" inch I.D. sleeve,

.375 inch long

metal bushing.

M114B

⋅ M114BPC .25 inch I.D. sleeve,

MNL113B MNL112B M114B

metal bushing.

VII

MN112B

⋅ MN112BPC .25 inch I.D. sleeve,

molded thermoplastic

bushing.

482

M114

M

B

11

P

4B

C

PC1

M1^.1²⁵4ⁱⁿB^chP^I.C^D.1^sM^leeveM^,N114B

M

metal bushing,

metric hardware.

MN114BPC

IV

XII

MNL112B

–

.25 inch I.D. sleeve,

.375 inch long

MN114B

⋅ MN114BPC .25 inch I.D. sleeve,

molded thermoplastic

bushing.

480,

484

metal bushing.

M113B

–

.25 inch I.D. sleeve,

metal bushing.

◊ Special order only; contact Switchcraft for price and delivery.

1 See schematics, pages 79 and 80.

2 Number(s) specified are not necessarily the only mating plug(s).

See Plugs Section.

MN113B

MN113BPC .25 inch I.D. sleeve,

molded thermoplastic

bushing.

482

VII

M113BPC1M .25 inch I.D. sleeve,

molded thermoplastic

482

bushing, metric hardware

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

98 ^{HI-D JAX}^®^{2- AND 3-CONDUCTOR}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" ENCLOSED PHONE JACKS (continued)

HI-D^®JAX 2- AND 3-CONDUCTOR

TWO CONDUCTOR PART NUMBERS

Solder Lug

Part

Number

Typical

Mating

Plug²

PC Terminals

Part Number

Jack

Schematic¹

Description

Open circuit

111

N111

111PC

N111PC

-

I

250

Insulated bushing

I

NL111

112A

.375 " long insulated bushing

Single closed circuit

.375" long bushing

I

112APC

◊L112APC

N112APC

-

III

V

L112A

N112A

NL112A

113

Insulated bushing

.375" long insulated bushing

Isolated "make" circuit

Insulated bushing

SERIES 11*

PC TERMINAL VIEW

SERIES N11*

113PC

-

Hi-D Jax^®2- and 3-conductor enclosed phone jacks are ideal

for panel/chassis and PC board mounting. Unitized molded

housing protects springs, provides mechanical and electrical

reliability, minimizes leakage and provides low capacity

between springs. Mounts on .625" minimum centers in rows

or arrays. .25" or .21" inside diameter bushing types, metal or

thermoplastic bushings (for insulated mounting). Insulated

Hi-D Jax^®jacks are specifically designed for in-circuit

(insulated) mounting from mounting surface and have fully

protected enclosed internal sleeve feature. Solder lugs or

PC terminals may be selected.

N113

V

◊113D

113E

◊113DPC

113EPC

Transfer circuit (1-C)

Isolated "break" circuit

VI ³

IX

THREE CONDUCTOR PART NUMBERS

112BPC

Double open circuit

.375" long bushing

Insulated bushing

IV

267

S-267

267

-

112B

L112B

N112B

NL112B

-

IV

N112BPC

-

IV

.375" long bushing

.210" inside diameter bushing

Single closed circuit

.375" long bushing

Insulated bushing

IV

S112BPC

113BPC

113BPC1M

-

IV

113B

-

VII

XXVIII

XII

MOUNTING

267

-

L113B

N113B

NL113B

113F

Jacks mount in a single .375" diameter hole on .625"

minimum centers. Series 11*, N11*, NS11* and S11* mount

in panels up to .156" thick. Series L11* and NL11* (long

bushing) mount in panels up to .25" thick. Jacks with PC

terminals mount on PC boards up to .094" thick. Formed

“shoulders” on each terminal provide stable stand-off mount.

Threaded bushing permits mechanical connection to

equipment panel. Mounting hardware is supplied. Also

available is a grounding spur bushing, which allows for

positive grounding of the bushing to the chassis. Contact

factory for details.

N113BPC

-

.375" long bushing

Ring circuit closed

Double closed circuit

.375" long bushing

Insulated bushing

113FPC

114BPC

114BPC1M

◊L114BPC

N114BPC

NL114BPC

114B

267

L114B

N114B

NL114B

.375" long bushing

1 Other circuits available; contact factory. Schematics pages 79 and 80.

2 See Plug Section for other options.

3 Two tip springs.

◊ Special order only. Contact Switchcraft.

SERIES 11* - 2- and 3-conductor types, threaded metal

bushing .276" long. .25" inside diameter bushings.

SERIES L11* - Same as Series 11*, except bushing is

.375" long for mounting in panels up to .25" thick.

SPECIFYING NOTE: Unless otherwise shown in

“Description”, jacks have .276" long threaded bushings

with .25" inside diameter.

SERIES N11* - Same as Series 11*, except bushing is

molded thermoplastic for insulated mounting.

SPECIFICATIONS

SERIES NL11* - Same as Series N11*, except bushing is

.375" long for insulated mounting in panels up to .25" thick.

MATERIAL

Mounting Bushing: Series 11*, L11*, S11* -

Nickel-plated copper alloy.

Series N11*, NL11*, NS11* - Molded thermoplastic

over nickel-plated copper alloy sleeve.

SERIES S11* - Same as Series 11*, except bushing has

.21" inside diameter. Smaller diameter protects against

accidental insertion of plugs with .25" diameter fingers.

◊SERIES NS11* - (SPECIAL ORDER ONLY) - Same as

Series N11*, except bushing is .21" inside diameter.

113BPC1M AND 114BPC1M - Versatile, 3-conductor

113BPC1M and 114BPC1M feature springs which accept

a wide variety of 1/4" plug designs. Self-aligning PC terminals

allow for easier insertion into a printed circuit board. Also

feature a metric thread mounting.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{HI-D JAX}^®^{2- AND 3-CONDUCTOR}99

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" ENCLOSED PHONE JACKS (continued)

HI-D JAX^®2- AND 3-CONDUCTOR

M Series

Hi-D Jax^®with Insulated Bushing

Recommended

PCBoard Layout

Hi-D Jax^®with PC Terminals

Standard (Solder lugs)

.375 (long bushing only)

[9.53]

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

100 ^{HI-D JAX}^®2- AND 3-CONDUCTOR

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SPRING LOCK PC TERMINALS FOR HI-D JAX^®

HI-D JAX^®SHOWING SPRING

LOCK PC TERMINALS

Hi-D Jax^®enclosed 1/4" phone jacks offer spring lock PC

terminals which close during insertion into PC board. Upon

completed insertion, the terminals reopen to securely hold the

jack to the PC board during soldering. Solder “fills” the terminals

which provides an additional security from loosening.

The spring lock terminal is available on all Hi-D Jax^®which

currently offer PC terminals.

NOTE: Tip and ground terminals can be specified with spring

lock terminals (also ring terminal on 3-conductor jacks).

MOUNTING

Jacks mount in a single .375" diameter hole on .625" minimum

centers. Series 11*, N11* and S11* mount in panels up to

.156 " thick. Series NL11* (long bushing) mount in panels up to

.250 " thick. Jacks with PC terminals mount on PC boards up to

.094 " thick. Spring lock PC terminals hold jack securely to PC

board. Threaded bushing permits mechanical connection to

equipment panel. Mounting hardware is supplied. See

“RECOMMENDED PC BOARD LAYOUT” for further details.

CLOSE-UP VIEW OF

SPRING LOCK TERMINALS

SERIES 11* - 2- and 3-conductor types, threaded metal

bushing .276" long. .250 inch inside diameter bushings.

SERIES N11* - Same as Series 11* except bushing is

molded thermoplastic for insulated mounting.

SERIES NL-11* - Same as Series N11* except bushing is .375"

long for insulated mounting in panels up to .250" thick.

SERIES S11* - Same as Series 11* except bushing has .210"

inside diameter Smaller diameter protects against accidental

insertion of plugs with .250" diameter fingers.

SPECIFICATIONS

MATERIAL

Mounting Bushing: Series 11*, S11*: Nickel-plated copper

alloy. Series N11*, NL11*: Molded thermoplastic over plated

copper alloy sleeve.

PARTIAL VIEW SHOWING SPRING LOCK TERMINALS

Tip, ring and sleeve terminals are spring lock type.

ORDERING INFORMATION

TWO CONDUCTOR PART NUMBERS

Typical

Jack

Schematic

Mating

Part Number

Description

Plug¹

◊

111PCS

Open circuit

I

250

N111PCS

112APCS

N112APCS

113PCS

Insulated bushing

Single closed circuit

Insulated bushing

Isolated “make” circuit

Isolated “break” circuit

I

III

V

IX

113EPCS

THREE CONDUCTOR PART NUMBERS

◊

112BPCS

Double open circuit

Insulated bushing

.210" I.D. bushing

Single closed circuit

Insulated bushing

Ring closed circuit

Double closed circuit

Insulated bushing

.375" long bushing

IV

267

S267

267

N112BPCS

S112BPCS

113BPCS

IV

VII

N113BPCS

113FPCS

VII

RECOMMENDED PC BOARD LAYOUT SPRING LOCK

TERMINALS (COMPONENT SIDE)

XXVIII

XII

114BPCS

NOTES:

1. SERIES 110PC––ALL HOLES TO CLEAR .078" X .016" TERMINAL.

2. SERIES 110PCS––TIP, RING & SLEEVE HOLES TO BE .055" DIA. RING SHUNT &

TIP SHUNT HOLES TO CLEAR .078" X .016" TERMINAL.

N114BPCS

NL114BPCS

XII

1 See Jack Section for other mating plugs.

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{RIGHT-ANGLE PHONE JACKS}101

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" RIGHT-ANGLE PHONE JACKS

SERIES SN37, SN49 AND SN70

SN49B12B with cover Number P2994

SN49A12B

SN37A14B with cover Number P2993

SN49C12B

SN70B12A

SN70C14B

These low-profile phone jacks have “snap-in” PC mounting,

right-angle plug insertion and available with 2- and 3-conductor

circuits and plastic or metal bushings. Ideal for telecommunications,

data processing and other high quality audio connecting

applications.

SERIES SN37A - Right-angle PC mount phone jack with molded

plastic housing. Only .375" high, this jack features a plain

(non-threaded) bushing and accepts commercial standard phone

plugs with .25" diameter finger.

Insertion Force: 8 pounds maximum.

Withdrawal Force: 1.5 pounds minimum.

Life: 10,000 cycles minimum.

ELECTRICAL

Insulation Resistance: 2 x 106 MΩ at 500 V DC per

MIL-STD-202, method 302 (initial).

Dielectric Withstanding Voltage: 500 V AC.

ENVIRONMENTAL

Thermal Range: -55°C (-67°F) to +85°C (+185°F) Non

Jack circuit selection:

2-conductor • Single open circuit • Shunted tip

3-conductor • Double open circuit • Shunted tip and ring

operating. -20°C to + 65°C Operating.

Thermal Shock: Per MIL-STD-202d, method 107.

Humidity: Per MIL-STD-202, method 106, less steps 7A and 7B.

Salt Spray: Per MIL-STD-202, method 101.

Jack housing snaps into PC boards (.062" thick) and features

molded tension fingers to provide stable mount. Location pin

polarizes mounting for correct insertion every time. Clearance

between housing facilitates board cleaning without disturbing

internal springs. SN37 without tension fingers available on

special order.

MATERIAL

Housing and Cover: Black thermoplastic, UL 94V-O.

Contact Springs: Copper alloy with tin-plated terminals.

Hardware: Nickel-plated copper alloy.

Metal Bushing: Nickel-plated copper alloy.

Molded housing protects internal parts and allows high density

packaging. Supplied with “Snap-On” cover.

ORDERING

1. Order jacks from tables on page 103.

2. For all special order items, contact Switchcraft.

SERIES SN49A - Similar to Series SN37A, except .492" high and

insulated/plain (non-threaded) bushing. “Snap-On” cover available

on special order only.

SERIES SN49B - Similar to Series SN37A, except .492" high and

insulated threaded bushing. Washer and hex nut for bushing

mount supplied. “Snap-On” cover available on special order only.

SERIES SN49C - Similar to Series SN37A, except .492" high and

threaded metal bushing. Washer and hex nut for bushing mount

supplied. “Snap-On” cover available on special order only.

SERIES SN70B - This series features threaded/insulated

bushing and .708" in height. Circuit selection and housing features

are same as Series SN49B. “Snap-On” cover not available.

SERIES SN70C - Same as Series SN70B, except bushing is

threaded metal type.

SPECIFICATIONS

MECHANICAL

Shock: Per MIL-STD-202, method 213.

Vibration: Per MIL-STD-202, method 201.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

102 ^{RIGHT-ANGLE PHONE JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" RIGHT-ANGLE PHONE JACKS (continued)

SERIES - RA and RN

Series RN110

Series RA

SERIES RA - 2- and 3-conductor RA Jax^®are designed with

split terminals which provide two distinct advantages over

contemporary jacks:

SPECIFICATIONS

Housing: Thermoplastic.

Bushing: Integral with housing.

1. Positive retention of jack in PC board during wave soldering.

2. Split terminal permits additional solder flow paths up the

terminal for better mechanical/electrical connection

Tip spring design facilitates positive retention of differing mating

plug tip shapes (industry standard and others).

Springs: Copper alloy, silver-plated (also available with selectively

gold-plated contact points and selectively tin-plated terminals).

Contacts: Integral, part of shunt springs.

NOTE: Specifications for Mechanical, Electrical and Environmental

are the same for Hi-D^®Jax. (page 98)

SERIES RN - Right-angle Hi-D Jax^®permits space-saving

mounting on PC boards. Available in 2- and 3-conductor

types with or without shunt circuits, which can mate with .25"

diameter COMMERCIAL or TELEPHONE/MIL plug fingers.

Right-angle jack permits tip of mating plug to be inserted

parallel with PC board. Can be mounted on PC boards or

combined PC board and panel/chassis.

Mounted through .375" diameter holes (locknut and washer

supplied) in panels and chassis up to .141" thick. Minimum

mounting centers are .625". If insulated mount is desired,

mounting with flat, non-conductive washer (not supplied) is

recommended.

PC terminals mount on boards up to .125" thick, and hand dip

or wave soldering, is recommended. Three separate standoffs

fit through board to provide stable mounting.Threaded bushing

permits optional fastening to panel or chassis.

SERIES RN110 - 2- and 3-conductor right-angle types mount

in PC boards or panel/chassis. Bushing is .278" long.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{RIGHT-ANGLE PHONE JACKS – SERIES RA, RN AND SN}103

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" RIGHT-ANGLE PHONE JACKS (continued)

ORDERING INFORMATION

Typical

Mating

Plug³

Typical

Mating

Plug³

SERIES SN

Jack²

SERIES RA

Jack²

Part Numbers

SN37A11¹

Description

Schematic

Part Numbers

Description

Schematic

2-cond., open circuit

I

RA49B11

2-cond., open circuit

I

250

267

250

267

SN37A12A¹2-cond., single closed circuit

SN37A12B¹3-cond., double open circuit

SN37A14B¹3-cond., double closed circuit

III

IV

XII

I

RA49B12A

RA49B12B

RA49B14B

RA49C11

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

SN49A11¹

2-cond., open circuit

250

267

250

267

250

267

250

267

250

267

250

267

250

267

250

267

SN49A12A¹2-cond., single closed circuit

SN49A12B¹3-cond., double open circuit

SN49A14B¹3-cond., double closed circuit

III

IV

XII

I

RA49C12A

RA49C12B

RA49C14B

RA70B11

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

SN49B11¹

SN49B12A¹2-cond., single closed circuit

SN49B12B¹

3-cond., double open circuit

SN49B14B¹3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

RA70B12A

RA70B12B

RA70B14B

RA70C11

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

SN49C11

2-cond., open circuit

SN49C12A

SN49C12B

SN49C14B

SN70B11

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

RA70C12A

RA70C12B

RA70C14B

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

III

IV

XII

SERIES RN

Part Numbers

SN70B12A

SN70B12B

SN70B14B

SN70C11

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

2-cond., open circuit

III

IV

XII

I

250

267

RN111PC

RN112APC

RN112BPC

RN113BPC

◊RN113FPC

2-cond., single open circuit

2-cond., single closed circuit

3-cond., double open circuit

3-cond., tip closed, ring open

3-cond., tip open, ring closed

3-cond., double closed circuit

I

III

IV

VII

SN70C12A

SN70C12B

SN70C14B

2-cond., single closed circuit

3-cond., double open circuit

3-cond., double closed circuit

III

IV

XII

XXVIII

XII

RN114BPC

1 Series SN37A supplied with Part Number P2993 cover. Series SN49A and SN49B can

be supplied with Part Number P2994 cover on special order. Contact Switchcraft.

2 See pages 79 and 80.

3 Other mating plugs are available.

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

104

RIGHT-ANGLE PHONE JACKS – SERIES SN

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" RIGHT-ANGLE PHONE JACKS (continued)

JACK SCHEMATICS

SERIES SN

SERIES

SN37A

SERIES

SN49A

SERIES

SN49B

SERIES

SN49C

SERIES

SN70B

SERIES

SN70C

RECOMMENDED PC

BOARD LAYOUT

SERIES SN37A, SN49A & SN49B

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN49C

COVERS, PART NO. P-293 & P-2994

(No. P-2994, special order only)

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

SERIES SN70B

BOARD LAYOUT

SERIES SN70C

(Component Side)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{1/4 RIGHT-ANGLE PHONE JACKS – SERIES RA AND RN}105

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" RIGHT-ANGLE PHONE JACKS (continued)

SERIES RA and RN

SERIES RA49B

SERIES RA49C

SERIES RA70B

SERIES RA70C

RN SERIES

DIMENSIONS

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

RECOMMENDED PC

BOARD LAYOUT

(Component Side)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

106 ^{JACK COVERS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

JACK COVERS

Reliable, spring-loaded covers effectively seal front panel

bushing openings from dust and dirt when mating plugs are

not connected to jack. Series 500 is mounted with conventional

threaded bushing jacks. Special locknut (comes with Series

500 jack covers) seals tightly against rubber washer when

cover is closed. Series 600 is used with certain type tip jacks.

Due to variable jack dimensions, two .031" washers are supplied.

515

SPECIFICATIONS

MATERIAL

Base and Cover: Steel per QQ-S-698; finish per

MIL-F-14072 (Sig. C), enamel, semi-gloss.

Axle: Copper alloy per QQ-W-321, Type 321,

composition B. Plated per QQ-P-416, Type II, Class 3.

Spring: Stainless steel per QQ-W-432, Type 302.

Hex Nut: Copper alloy per QQ-B-626, composition 22.

Same plating as axle.

520

Gasket: Synthetic rubber per MIL-R-6855, Type II,

35-40 Durometer.

Washer (600 only): Steel per QQ-S-698; plated per

QQ-P-416, Type II, Class 3.

Additional Specifications for Numbers 512 and 612:

Same as above, except rivet, base, cover and hex nut

and washer (Number 612 only) are nickel-plated

per QG-N-290.

Part

No.

Part

No.

Part

No.

Part

No.

Color

Black

Olive Drab

Bright Nickel

510

512

◊610

515

520

615

612

Navy Gray

◊620

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

(

)

^{1/4 PHONE JACKS – SERIES E LOCKING AND THICK PANEL PHONE JACKS}107

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" PHONE JACKS (continued)

LOCKING

THICK PANEL PHONE JACKS

PHONE JACKS

151

SERIES E

Jacks are standard 2- and 3-conductor phone jacks with extra long

threaded bushing for mounting in panels/chassis up to 1.25" thick.

Metal bushing virtually eliminates hum pick-up, and is ideal for electric

guitar and speaker connections. Jacks mate with standard

commercial phone plugs. See plug section for mating plugs. Jacks

mount in a single .469" diameter hole. Rugged cable clamp protects

connections from twisting and pulling stresses.

Series E jacks provide stable, secure connections in panels where

shock/vibration or accidental disconnect may occur. Plug locks-in

automatically upon insertion; press “PUSH” tab to unlock and

remove plug. Series E jacks have the same front panel

appearance as Series E Q-G^®audio connectors.

SPECIFICATIONS

MECHANICAL

Life: 10,000 cycles minimum.

SPECIFICATIONS

MATERIAL

ELECTRICAL

Insulation Resistance: 2 x 106 MΩ at 500 V DC per

MIL-STD-202, method 302 (initial).

Dielectric Withstanding Voltage: 1,000 V AC (rms).

Mounting Bushing: Nickel-plated copper alloy with knurled flange.

Insulating Spacer: Rigid plastic.

Insulator/Spring Mount: Thermoplastic.

Springs: Copper alloy.

Terminals: Tip: Copper alloy. Ring: (Number 152B only) copper alloy.

Sleeve: Steel, tin-plated.

Hardware: Supplied with one, Number P10531 nickel-plated copper alloy

hex nut, and one, Number P14761 nickel-plated copper alloy flat washer.

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock: Per MIL-STD-202, method 107.

Humidity: Per MIL-STD-202, method 106.

Salt Spray: Per MIL-STD-202, method 101.

Part

Number

Jack

Typical

Description

Schematic Mating Plug

151

152

152B

153

2-conductor, open circuit, nickel finish

2-conductor, open circuit, brass finish

3-conductor, double open circuit, nickel finish

2-conductor, open circuit, gold-plated springs,

electro-polish brass finish, 9/16-12 UNC wood threads

3-conductor, double open circuit, gold finish,

no cable clamp

I

IV

I

280

297

280

MATERIAL

Shell: Die-cast zinc, with satin nickel-plating. Black chrome over

nickel-plating on special order.

Insert and Latch: Thermoplastic, UL 94V-O.

Latch Release: Nickel-plated die-cast zinc.

Contact Springs: Tin-plated copper alloy.

154

155

IV

297

3-conductor, double open circuit, black satin finish,

no cable clamp

Typical

Part

Number

Jack

Schematic

Mating

1

2

Description

Plug

I

E111L

2-cond., open circuit

250

267

IV

3-cond., double open circuit

E112BL

1. See Jack Schematics, pages 79 and 80

2. See Plugs Section

THICK PANEL PHONE JACKS

RECOMMENDED

PANEL CUTOUT

LOCKING PHONE JACKS, SERIES E

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

108

EXTENSION JACKS AND 1/4 SPEAKER JACKS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" EXTENSION JACKS (IN-LINE)

TWO-CONDUCTOR PART NUMBERS

Part

Mating

Plug¹

Number

Description

80

Black handle; screw terminals

Black handle; solder lugs

250

80

120

121, 131

88

120

121

128

Shielded handle; screw terminals

Shielded handle; solder lugs; cable clamp

Shielded handle; solder lugs

Extension Jax^®jacks are connected to the end of a cable.

2- and 3-conductor jacks mate with standard commercial

phone plugs, and have a sturdy cable clamp strain relief,

knurled shielded or molded black plastic handles, and a

screw type solder terminal. All internal parts are interlocked.

Note: See locking phone plugs section.

THREE-CONDUCTOR PART NUMBERS

Part

Mating

Plug¹

Number

Description

SPECIFICATIONS

MATERIAL

Body, Sleeve and Shielded Handle: Nickel-plated

copper alloy.

Plastic Handles: Molded black thermoplastic.

Springs: Special copper alloy.

Bushing and Flange: Plated copper alloy.

Insulation: Thermoplastic.

131

Shielded handle; solder lugs

Black handle; screw terminals

Similar to No. 830 except, .21" I.D. sleeve

Black handle; solder lugs

267

480

267

830

S830

838

1230

1238

Shielded handle; screw terminals

Shielded handle; solder lugs

1. Other mating plugs are available.

Clamp Terminals: Tin-plated copper alloy.

121, 131

Z15J

1/4" SPEAKER JACKS

High power 2-conductor speaker jack carries 15A (continuous)

audio speaker current levels. Jack Number Z15J has positive

detent for plug retention. Terminations are solder lug; wires

accepted are up to 10 AWG. Red housing indicates high current

rating. Recommended mating plugs: 70, 184, 187 series.

Z15J

SPECIFICATIONS

Housing: Glass reinforced thermoplastic, UL 94V-O.

Tip Spring and Ground Terminals: Copper alloy.

Bushing and Hardware: Nickel-plated copper alloy

(hardware supplied).

Heat Rise: 30°C with 15 A continuous carry.

Life: 10,000 (minimum) with proper plug.

Part Number

Z15J

Description

High power speaker jack

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{SHIELDED PHONE JACKS, SF-JACKS}^®^{SHORT FRAME JACKS, MINI PHONE JACKS}109

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" SHIELDED PHONE JACKS

CN12A

Shield is assembled as part of the jack; cover “snaps” into

place. Shield is designed for Hi Z circuits. Mounting is

through a 3/8" diameter hole in chassis/panel up to

.156" thick with hex nut and flat washer (supplied).

On special order, jacks with .21 inch inside diameter

bushing are available.

TWO CONDUCTOR PART NUMBERS

Part

Number

Jack

1

Description

Schematic

Uses Number 11 Littel-Jax^®jacks

Uses Number 12A Littel-Jax^®jacks

I

◊

CN11

◊

CN12A

III

◊ Special order only. Contact Switchcraft.

SPECIFICATIONS

THREE CONDUCTOR PART NUMBERS

MATERIAL

◊

CN12B

CN13B

Uses Number 12B Littel-Jax^®jacks

Uses Number 13B Littel-Jax^®jacks

IV

Cover and Shield: Copper alloy, nickel-plated.

Cable Entry Insulation: Thermoplastic.

VII

◊

1 See jack schematics on pages 79 and 80.

2 See Plug Section for mating information.

◊ Special order only. Contact Switchcraft.

SF-JAX^®SHORT FRAME JACKS

.141" MINIATURE

PHONE JACKS

Typical

Schematic Mating

Part

No. Cond. Number

Mounting

Plug MIL Type Contacts Rating In. (mm)

125

24B

25

3

2

3

2

3

2

3

XII

XIII

VII

XI

267

250

267

250

267

250

482

-----

MINIATURE EXTENSION JACK,

PHONE JACK NUMBER 125 (EIA STANDARD)

.375 (9.52)

hole,

mounts in

panels up

to .156

◊53B

◊54A

◊54B

◊55

-----

Cable-mounted Tini-Extension Jax^®2-conductor single open

circuit jack has built in cable clamp/sleeve terminal. Mates with

Tini-Plug^®phone plugs and other plugs with .141" diameter

fingers and compatible tip shape. Shielded housing/handle is

knurled for positive fingertip grip; solder lug terminals.

Body and handle: Nickel-plated copper alloy.

Insulation: Rigid plastic.

3A

125V

AC

-----

Fine

XII

XIII

XV

-----

Silver

-----

(3.96) thick

◊C-55B

JJ-095,

M641/14-1

Long spring design reliability with minimum behind-panel

depth. Series 50 same as Series 20, except solder lug

location requires more depth, but less panel space.

Number C55B has MIL type insulation and finish.

Springs: Plated copper alloy.

TINI-EXTENSION JAX JACK

Typical

SERIES 20

SERIES 50

24B

25

Part

Number

Jack

Schematic

Mating

Plug

53B

54A

54B

55

Description

C55B

125

Extension Jack

I

750

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

110 ^{MINIATURE PHONE JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

.141" MINIATURE PHONE JACKS

PC142A

41

42A

142A

TINI-JAX^®MINIATURE PHONE JACKS,

TINI-D-JAX^®MINIATURE ENCLOSED

NUMBERS 41, 42A, 43A

PHONE JACKS, NUMBERS 142A, PC142A

Tini-D Jax uses Hi-D Jax^®construction and mounts on .375"

centers. Weight: 3.6 grams. Number 142A mounts through .25"

diameter hole in chassis/panel up to .125" thick. Four standoff

dimples can be molded into housing to reduce

effective length of bushing to .187" (special order).

Number PC142A has special spring terminals for “snap-in”

mounting to PC boards up to .125" thick - ready for hand,

wave or dip-soldering.

Tini-Jax 2-conductor phone jacks, (for limited space

connecting, mate with miniature phone plugs having .141 "

diameter fingers and compatible tip shape) are 1/3 the size of

Littel-Jax^®and weigh less than 1/8 ounce. Notched insulators

interlock internal parts. Unique tip spring shape mates with

Switchcraft Tini-Plug^®phone plugs. Mounting hole: .250"

diameter in panels up to .125" thick (mounting hardware

supplied). For insulated mount, order two washers separately,

Number S1564 (swedged fiber washer .312" diameter

mounting hole) and number S2207 (flat phenolic washer).

SPECIFICATIONS

MECHANICAL

Life: 5,000 insertion/withdrawal cycles, minimum.

Insertion/Withdrawal: 15 ounce minimum,

40 ounce maximum, insertion. 12 ounce minimum,

25 ounce maximum, withdrawal.

SPECIFICATIONS

MECHANICAL

Life: 5,000 insertion/withdrawal cycles, minimum.

ELECTRICAL

Contact Resistance: .075 ohms maximum.

Insulation Resistance: 5,000 MΩ minimum.

Dielectric Withstanding Voltage: 250 V AC maximum.

Contact Rating: .25A, 48 V DC.

Contact Resistance: .10 ohms maximum.

Dielectric Withstanding Voltage: 250 V AC maximum.

Shunt Tension: 100 grams minimum.

MATERIAL

Housing: Molded plastic.

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Mounting Bushing: Plated copper alloy.

Tip Spring: Plated copper alloy, bifurcated.

Shunt Springs: Plated copper alloy.

Sleeve Bracket: Plated steel.

Insulating Spacers: Rigid plastic.

Springs: Special copper alloy.

Sleeve Terminal: Tin-plated copper alloy.

Hardware: Supplied with one, Number P11501

nickel-plated copper alloy locknut, and one,

Number S17901 nickel-plated steel flat washer.

Insulator: Rigid plastic.

Hardware: Number 142A supplied with one, Number P1975

nickel-plated copper alloy locknut, and one, Number S3997

nickel-plated steel flat washer.

Typical

Part

Number

Jack

Schematic

Mating

1

2

Description

Open circuit

Plug

41

42A

I

III

750

Shunted (closed circuit)

Special transfer circuit

Shunted (closed circuit)

43A

Note 3

III

142A

PC142A

III

1. See jack schematics, pages 79 and 80.

2. See Plugs Section for mating information.

3. When inserted, plug tip contacts “make” tip spring. Further insertion allows

tip to short “make” tip spring and tip spring together. Full insertion opens

tip shunt circuit.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{MINIATURE PHONE JACKS}111

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

.141" MINIATURE PHONE JACKS (continued)

“TINI-JAX” JACKS

142A

“TINI-D” JACKS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

112 ^{3.5MM DUAL STEREO JACK}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5MM DUAL STEREO JACK

UNSHIELDED - 35RAPC7J

SHIELDED - 35RAPC7JS

FEATURES

MATERIALS

• 3-conductor, miniature phone jack mates with 3.5 mm

Housing: Thermoplastic.

finger plugs.

Tip and Ring Springs: Silver-plated copper alloy.

Shunt Terminals: Silver-plated copper alloy.

Sleeve Terminals: Silver-plated copper alloy.

Shield: Pre-tinned copper alloy.

• Saves board space...two jacks in a single vertical

mount footprint.

• Ideally suited for infra-red and convection oven

soldering 235°C (455°F).

PERFORMANCE SPECIFICATIONS

Insertion/Extraction Forces, initial: 0.8 to 6 pounds.

Dielectric Withstanding Voltage: 500 VAC.

Insulation Resistance, initial: 100 Megaohms, min.

Contact Resistance: Between plug and jack:

50 milliohms, maximum Between springs and shunts:

30 milliohms, maximum.

• Board retention pins accommodate PC board thickness

range of .050" to .080".

• Single-screw panel mounting hole is standard.

• EMI-RFI shield, optional.

• Housing UL 94V-0 rated against flammability.

APPLICATIONS

• Multi-media workstations

• Headphones/microphone sets

• Interactive TV

• Audio

• Telecommunications

• Medical

Life: 5000 cycles, minimum.

ORDERING INFORMATION

Part Number:

Shielded - 35RAPC7JS

Unshielded - 35RAPC7J

1. Order by part number.

• Computer

• Instrumentation

2. Contact Switchcraft for special order information.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{3.5MM DUAL STEREO JACK}113

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

3.5MM DUAL STEREO JACK (continued)

NOTES:

1. Shield isolated from terminals 1 and 6.

2. Width of all terminals = 0.032" (0.814 mm).

3. Use Camcar Textron S25 T8 TORX pan head “Duro-PT”

thread cutting fastener of appropriate length or equivalent.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

114 ^{3.5MM SINGLE MONO AND STEREO JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5MM SINGLE MONO AND STEREO JACKS

35RAPC2BHN2

35RAPC4BV4

35RAPC2AV

35RAPC4BH3

35RAPC2BV4

35RAPC2BH3

Insulating Washers: Rigid Plastic

Springs: Copper alloy

FEATURES

MATERIALS

• 2 and 3 conductor 3.5mm phone jacks

• Right angle PC mount, true SMT

versions, and open frame panel mounts

• Wide variety of circuits available

• Mates with all 3.5mm plugs Right angle

PC mount available in low profile,

horizontal styles

Housing: Thermoplastic, UL94V-1

Terminals: Silver-plated, copper alloy

Bushing: Nickel-plated, copper alloy

Performance Specifications:

Contact Resistance: < 50 milliohms

Insulation Resistance: 100 milliohms min.

Dielectric Withstanding Voltage: 250

VAC (35RAPC2BHN2- 500 VAC)

Open Frame Versions Materials:

Housing (35PM2BV2):

Sleeve Terminal: Tin-plated, copper alloy

Hardware: Supplied with one, P11501

nickel-plated brass locknut, and one,

S17901 nickel-plated steel flat washer

Performance Specifications:

Contact Resistance: .075 ohms max.

Insulation Resistance: 5,000 Mohms

min

Dielectric Withstanding Voltage:

250 VAC Life: 5000 cycles, min

Thermoplastic, 94V-1

Life: 5000 cycles, min.

Bushing: Nickel-plated, copper alloy

ORDERING INFORMATION

Part numbers which include the letter “N” designate non-threaded bushings.

Part numbers without the letter “N” designate threaded bushing.

Height vs.

Width

Part Number Description

Width

horizontal

vertical

Bushing

threaded³

Part Number Description

Bushing

threaded³

35RAPC4BH3

35RAPC2AV4

35RAPC2BV4

35RAPC3BV4

35RAPC4BV4

35RAPC2AVN4

35RAPC2BVN4

35RAPC3BVN4

35RAPC4BVN4

stereo

mono

stereo

mono

stereo

35RAPC2AV

35RAPC2AHN2

35RAPC2AHN3

35RAPC2BHN2

35RAPC2BHN3

35RAPC3BHN2

35RAPC3BHN3

35RAPC4BHN2

35RAPC4BHN3

35RAPC2AH3

mono

stereo

mono

stereo

vertical

horizontal

non-threaded

threaded³

non-threaded

Replacement Knurl Nut P3345

35RAPC2BH3

threaded³

35RAPC3BH3

1. Order by part number

2. Contact Switchcraft for special ordering information

3. Mounting hardware included.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

3.5MM SINGLE MONO AND STEREO JACKS

115

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

3.5MM SINGLE, MONO AND STEREO JACKS (continued)

35RAPC2AV – MONO, VERTICAL, THREADED

MATERIALS

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum.

Insulation Resistance:

100 milliohms minimum at 250V DC.

Dielectric Withstanding Voltage: 250V AC.

Life: 5000 cycles, minimum.

Coil Spring: Steel wire.

Bushing: Nickel-plated copper alloy.

Terminal: Silver-plated copper alloy.

Tip Spring: Silver-plated copper alloy.

Shunt Terminal: Plated copper alloy.

Cover: Thermoplastic, transparent UL 94V-2.

Body: Thermoplastic, UL 94V-1 black color.

Insertion Force: 0.88 pounds - 3.5 pounds.

Withdrawal Force: 0.88 pounds - 2.64 pounds.

35RAPC2AV4, 35RAPC2BV4, 35RAPC3BV4, 35RAPC4BV4 - STEREO, VERTICAL, THREADED

MATERIALS

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum,

initial 50 milliohms maximum, after life.

Insulation Resistance: 50 megohms minimum at 500V DC.

Dielectric Withstanding Voltage: 250V AC.

Life: 5,000 cycles, minimum.

Coil Springs: Steel Wire.

Ring Spring: Copper alloy strip, tin alloy plating.

Ground Terminal: Copper alloy strip, tin alloy plating.

Bushing: Nickel-plated copper alloy.

Cover: Thermoplastic, UL 94V-0 black color.

Body: Thermoplastic, UL 94V-0 black color.

Insertion Force: 0.88 lbs. to 3.50 lbs.

Withdrawal Force: 0.88 lbs. to 3.10 lbs.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

116 ^{3.5MM SINGLE MONO AND STEREO JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5MM SINGLE, MONO AND STEREO JACKS (continued)

35RAPC2AHN2, 35RAPC2BHN2, 35RAPC3BHN2, 35RAPC4BHN2 - STEREO, HORIZONTAL, NON-THREADED

MATERIALS

PERFORMANCE SPECIFICATIONS

Cover: Thermoplastic, UL 94V-1 black color.

Ring Spring: Copper alloy.

Tip Spring: Silver-plated copper alloy.

Ground Terminal: Silver-plated copper alloy.

Metal: Copper alloy, nickel plating.

Body: Thermoplastic, UL 94V-0 black color.

Contact Resistance: 30 milliohms maximum, initial

100 milliohms maximum, after life.

Insulation Resistance: 100 megohms minimum

at 500V DC.

Dielectric Withstanding Voltage: 500V AC.

Life: 5000 cycles, minimum.

Insertion Force: 0.88 pounds - 6.6 pounds.

Withdrawal Force: 0.88 pounds - 6.6 pounds.

**Same drawing for jack with non-threaded bushing.

, 35RAPC2BH3, 35RAPC3BH3, 35RAPC4BH3

35RAPC2AH3

- STEREO, HORIZONTAL, THREADED

MATERIALS

PERFORMANCE SPECIFICATIONS

Contact Resistance: 20 milliohms maximum, initial

100 milliohms maximum, after life.

Insulation Resistance: 100 megohms minimum.

Dielectric Withstanding Voltage: 250V AC.

Life: 5000 cycles, minimum.

Coil Springs: Steel wire.

Tip Spring: Silver-plated copper alloy.

Ring Spring: Silver-plated copper alloy.

Ground Terminal: Silver-plated copper alloy.

Bushing: Nickel-plated copper alloy.

Cover: Thermoplastic, transparent UL 94V-2.

Body: Thermoplastic, UL 94V-1 black color.

Insertion Force: 0.88 lbs. - 3.50 lbs.

Withdrawal Force: 0.88 lbs. - 3.10 lbs.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

3.5MM SINGLE MONO AND STEREO JACKS

117

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

3.5MM SINGLE MONO AND STEREO JACKS

Switchcraft introduces a new series of 3.5mm jacks. These

low profile jacks come in a wide variety of circuits, both

2 and 3 conductor versions. Circuits include mono closed,

stereo open, stereo tip closed and ring open, and stereo

closed. The 35RASMT Series is available on tape and reel

only. Contact Switchcraft for exact dimensions of the reels.

They’re designed for use in today’s electronic equipment

that features remote speakers, headsets, and headphones.

While they are more compact than commonly used PC

35RASMT

mount phone jacks, they are still extremely durable. Jacks

come on tape and reel, 1K per reel.

FEATURES AND BENEFITS

3.5MM SINGLE MONO

• SMT mounting

• Tape and reel packaging

AND STEREO JACKS

Part Number/Description

• Wide variety of circuits

35RASMT2AHNTR

Mono, closed circuit, on tape and reel

APPLICATIONS

• Computer

• Video Cameras

• Personal/Portable Audio Devices

• Multimedia

35RASMT2BHNTR

Stereo, dual open circuit,

on tape and reel

SPECIFICATIONS

Electrical Current Rating: 3A

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms (min.)

Dielectric Withstanding Voltage: 250VAC @ 1 minute

35RASMT3BHNTR

Stereo, tip closed and ring open

circuit, on tape and reel

35RASMT4BHNTR

Stereo, dual closed circuit,

on tape and reel

MECHANICAL

Lifecycles: 5,000

Operating Temperature: -25°C to +85°C

MATERIAL

Housing: Black thermoplastic

Sleeve, Ring and Tip Terminals:

Copper Alloy, silver-plated

(See next page for drawings.)

Shunt Terminal: Copper Alloy, Silver-plated

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

118 ^{3.5MM SINGLE MONO AND STEREO JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5MM SINGLE MONO AND STEREO JACKS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{3.5MM SINGLE MONO JACKS}119

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

3.5 mm SINGLE MONO JACKS

35PM1

35PM2A

FEATURES

MATERIAL

Mounting Bushing: Nickel-plated copper alloy.

Insulating Spacers: Rigid plastic.

• 2-conductor phone jacks similar to Littel-Jax^®

phone jacks, but smaller.

• For connecting in limited space

Springs: Copper alloy.

• Mate with 3.5 mm phone plugs

Sleeve Terminal: Tin-plated copper alloy.

Hardware: Supplied with one, Number P11501

nickel-plated brass locknut, and one, Number S17901

nickel-plated steel flat washer.

• Notched insulators interlock internal parts

• Mounting hole: .250" diameter in panels up to .125" thick

(mounting hardware supplied)

• For insulated mount, order two washers separately,

Number S1564 (swedged fiber washer .312" diameter

mounting hole) and number S2207 (flat phenolic washer)

TYPICAL

MATING

PLUG

PART

NUMBER

JACK

SCHEMATIC¹

DESCRIPTION

Open circuit

SPECIFICATIONS

MECHANICAL

Life: 5,000 insertion/withdrawal cycles, minimum

35PM1

I

750

35PM2A

Shunted (closed circuit)

III

ELECTRICAL

1. See jack schematics on pages 79 and 80.

Contact Resistance: .075 ohms maximum

Insulation Resistance: 5,000 MΩ minimum

Dielectric Withstanding Voltage: 250V AC maximum

Contact Rating: .25A, 48V DC

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for more information.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

120 ^{2.5MM SINGLE MONO AND STEREO JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

2.5MM SINGLE MONO AND STEREO JACKS

Switchcraft introduces a new series of 2.5mm jacks. These low

profile jacks come in a wide variety of circuits, both 2 and

3 conductor versions. Circuits include mono closed, stereo open,

stereo tip closed and ring open, and stereo closed. The MDSMT

Series is available on tape and reel only. Contact Switchcraft for

exact dimensions of the reels. They’re designed for use in today’s

electronic equipment that features remote speakers, headsets, and

headphones. While they are more compact than commonly used

PC mount phone jacks, they are still extremely durable.

FEATURES AND BENEFITS

• SMT mounting

• Tape and reel packaging

• Wide variety of circuits

MDSMT4BRATR

APPLICATIONS

• Computer

• Video Cameras

• Personal/Portable Audio Devices

• Multimedia

SPECIFICATIONS

Electrical Current Rating: 3A

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms (min.)

Dielectric Withstanding Voltage:

250VAC @ 1 minute

MECHANICAL

Lifecycles: 5,000

Operating Temperature: -25°C to +85°C

MATERIAL

Housing: Black thermoplastic

Sleeve, Ring and Tip Terminals:

Copper Alloy, silver-plated

Shunt Terminal: Copper Alloy, Silver-plated

2.5MM SINGLE MONO

AND STEREO JACKS

Part Number/Description

MDSMT2BRATR

Stereo, dual open circuit

MDSMT2ARATR

Mono, closed circuit

MDSMT3BRATR

Stereo, tip closed and

ring open circuit

MDSMT4BRATR

Stereo, dual closed circuit

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

121

SUBMINIATURE PHONE JACKS

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

.101" SUBMINIATURE PHONE JACKS

TR2A

TR1PC

MDPC2A

MDSL2A

MDSL2ARA

MDPC2ARA

SUBMINIATURE PHONE JACKS, TR2A AND TR1PC

Extremely small, rugged, shunted Micro-Jax^®2-conductor jack is 1/4 the

size of a standard phone jack and weighs less than 1/20 ounce. Can be

wired for open or closed circuit operation. Internally keyed insulators

interlock all parts and tip springs grip mating plugs positively. Mates

with Switchcraft Micro-Plug^®phone plugs. Jacks mount through

.190" diameter hole in chassis/panels up to .093" thick. For insulated

mounting, a .281" diameter hole and .050" maximum panel thickness

applies. Order insulating washer separately. Number P1617

(flat phenolic washer) and Number P1618 (swedged fiber washer).

MECHANICAL - TR1PC:

Life: 10,000 insertion/withdrawal cycles, minimum.

Insertion/Withdrawal Forces: 11 ounces insertion,

11 ounce minimum withdrawal.

ENVIRONMENTAL - TR1PC:

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock: Per MIL-STD-202, method 107.

Humidity: Per MIL-STD-202, method 106.

Salt Spray: Per MIL-STD-202, method 101.

Number TR1PC: 2-conductor closed circuit jack with PC

terminals. Open frame and enclosed versions available. Mates with

Switchcraft^®Micro Plug^®numbers 850, 855, and 880.

SPECIFICATIONS - MICRO-D JAX

MECHANICAL:

Life: 10,000 insertion/withdrawal cycles minimum.

Insertion/Withdrawal Forces: 11 ounce insertion,

11 ounce minimum withdrawal.

SUBMINIATURE ENCLOSED PHONE JACKS

Micro-D Jax^®2-conductor jacks have insulated box construction and

subminiature size.

Number MDPC2A: 2-conductor closed circuit jack with PC

terminals. Mounts to single-, double-sided or multilayer boards either

singly or in rows as close as .344" centers (+/- .01 inches). Bushing is

.10" inside diameter.

ELECTRICAL:

Contact Resistance: .010 ohms maximum (initial), .020 ohms

maximum (after humidity, durability exposure), .10 ohms

maximum (after salt spray).

Insulation Resistance: 10,000 MΩ minimum (initial),

1,000 MΩ minimum (after humidity, durability exposure).

Dielectric Withstanding Voltage: 500 V AC maximum.

Contact Rating: .125 A, 125 V AC.

Number MDSL2A: Same as MDPC2A except, 1. solder lugs, 2.

bushing is #10-48 threaded (nut and washer supplied), and 3. mount

ing centers are .35" or .313". When mounted on .313" centers, sleeves

or adjacent jacks may be in intimate contact. Mounts through a .203"

diameter hole in chassis/panels up to .063" thick.

ENVIRONMENTAL:

SUBMINIATURE RIGHT-ANGLE PHONE JACKS

2-conductor jacks have molded housing which protects all internal

parts. Panel/chassis or PC boards mounting in rows, if desired, on

.351" centers. PC terminals need only .382" behind-panel clearance.

Thermal Range: -55°C to +85°C (non-operating);

-20°C to +65°C (operating).

Thermal Shock: Per MIL-STD-202, method 107.

Humidity: Per MIL-STD-202, method 106.

Salt Spray: Per MIL-STD-202, method 101.

Number MDPC2ARA: PC terminals mount/terminate directly to PC

or multilayer boards. Bushing clears a .156" diameter panel hole.

MATERIAL:

Number MDSL2ARA: Right-angle solder lugs and #10-48 threaded

bushing for chassis/panel mount. Mounts in .203" diameter hole in

chassis/panels up to .063" thick.

Housing: Glass reinforced plastic. Insulation: Rigid plastic.

Mounting Bushing (Micro-D): Nickel-plated copper alloy.

Mounting Bracket (Right-Angle Micro-D):

Nickel-plated copper alloy.

SPECIFICATIONS - MICRO-JAX^®ELECTRICAL:

Contact Resistance: .10 ohms maximum (spring to plug).

Shunt Resistance: .10 ohms maximum.

Dielectric Withstanding Voltage: 250 V AC.

Shunt Tension: 60 grams minimum.

Tip Spring: Silver-plated copper alloy.

Shunt Terminal: Silver-plated copper alloy.

Sleeve Terminal (Micro-D): Steel, tin-plated.

Sleeve Terminal (Right-Angle Micro-D): Silver-plated

copper alloy.

Hardware (Micro-D): Same as Micro-Jax (MDSL2A).

Hardware (Right-Angle Micro-D): Hex nut, nickel-plated

copper alloy, Number P15331; flat washer, nickel-plated

copper alloy S29571; not supplied with MDPC2A.

MATERIAL:

Mounting Bushing: Nickel-plated copper alloy.

Insulating Spacers: Rigid plastic.

Springs: Nickel-plated copper alloy. Integral contacts are plated.

Tip, Shunt and Sleeve Terminals: Silver-plated copper alloy.

Hardware: Supplied with one, P15331 nickel-plated copper alloy

hex nut, and one S29571 nickel-plated copper alloy flat washer.

Part

No.

Jack

Typical

Part

Jack

Typical

Schem.¹Mating Plug²No.

Schem.¹Mating Plug²

TR2A

TR1PC

MDPC2A

MDSL2A

MDPC2ARA

MDSL2ARA

MATERIAL - TR1PC

Threaded Bushing: Nickel-plated copper alloy.

Tip Spring: Copper alloy.

III

850

III

850

}

All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79

and 80. Note 2.: See Plugs Section for mating information.

Sleeve/Ground Terminal: Copper alloy tin-lead with nickel underplate.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

122 ^{SUBMINIATURE PHONE JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

.101" SUBMINIATURE PHONE JACKS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

PHONO JACKS

123

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

BULKHEAD PHONO JACKS

3501F

3501FP

3501FR

BPJF01

3514PC

3515PC

3517PC

BPJR01

BPJJ01

3505F

3503

FEATURES AND BENEFITS

SPECIFICATIONS

• Front or rear mount configurations

• Durable plated machined brass construction

• All mounting hardware is included

Material and Platings Housing:

Nickel or Gold-plated Brass

Contact: Nickel-plated Brass Insulator: ABS

Hardware: Nickel-plated Brass. Switchcraft introduces a

complete line of bulkheadmount phono (RCA) jacks to meet the

most critical audio, audio/video, and general-purpose electronic

applications. These jacks are offered in front and rear mount

solder type as well as jack to jack bulkhead configurations.

These jacks are available with black, white, blue, green, red,

and yellow insulators and nickel or gold plated bodies. All

mounting hardware is included.

Housing: Nickel or gold plated, copper alloy

(3514PC, 3515PC, 3517PC: Nickel plated, steel)

Terminals: Nickel plated, copper alloy (3515PC: Tin plated,

copper alloy)

APPLICATIONS

• Audio

• Video

• General Purpose Electronics

OPTIONS

• Front or rear mount solder type receptacles

• Jack to jack bulkhead configuration

• Insulator colors

• Gold or nickel plating

Bushing: Nickel-plated, copper alloy (3515PC: Ceramic)

Insulators: Thermoplastic

(See next page for drawings.)

(3517PC: Ceramic and glass filled thermoplastic)

Part Number

BPJR01

BPJR01AU

BPJR02

Description

Rear mount, black insulator

Part Number

BPJF05

BPJF05AU

BPJF06

Description

Front mount, blue insulator

Front mount, blue insulator, gold plated

Front mount, green insulator

Rear mount, black insulator, gold plated

Rear mount, red insulator

BPJR02AU

BPJR03

BPJR03AU

BPJR04

Rear mount, red insulator, gold plated

Rear mount, white insulator

BPJF06AU

3501FP

3505F

Front mount, green insulator, gold plated

Front Mount, natural insulator

RF version, uses low-loss nylon insulation

Rear mount, white insulator, gold plated

Rear mount, yellow insulator

For insulated mounting, order S2207 and S1564 insulating washers

BPJR04AU

BPJR05

BPJR05AU

BPJR06

BPJR06AU

3501F

3501FR

Rear mount, yellow insulator, gold plated

Rear mount, blue insulator

BPJJ01

BPJJ01AU

BPJJ02

BPJJ02AU

BPJJ03

BPJJ03AU

BPJJ04

BPJJ04AU

BPJJ05

Feed through, black insulator

Feed through, black insulator, gold plated

Feed through, red insulator

Rear mount, blue insulator, gold plated

Rear mount, green insulator

Feed through, red insulator, gold plated

Feed through, white insulator

Rear mount, green insulator, gold plated

Rear mount, rigid plastic mounting flange

Rear mount, natural insulator

Feed through, white insulator, gold plated

Feed through, yellow insulator

For insulated mounting, order S1028 and S1029 insulating washers

Feed through, yellow insulator, gold plated

Feed through, blue insulator

BPJF01

BPJF01AU

BPJF02

BPJF02AU

BPJF03

BPJF03AU

BPJF04

BPJF04AU

Front mount, black insulator

Front mount, black insulator, gold plated

Front mount, red insulator

BPJJ05AU

BPJJ06

BPJJ06AU

Feed through, blue insulator, gold plated

Feed through, green insulator

Feed through, green insulator, gold plated

Front mount, red insulator, gold plated

Front mount, white insulator

3503

Extension jack, shielded handle

Front mount, white insulator, gold plated

Front mount, yellow insulator

Front mount, yellow insulator, gold plated

3514PC

3515PC

Vertical PC mount, nickel plated steel bushing

Vertical PC mount, ceramic bushing

3517PC

Horizontal PC mount, nickel plated steel bushing

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

PHONO JACKS

124

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{PHONO JACKS AND PHONO JACK SETS}125

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS AND PHONO JACK SETS

PJRAS1X1S04

PJRAS1X2S02

PJRAN2X1U02

PJRAS2X1S01

PJRAN1X1U03

PJRAN3X1U03

PJRAS3X1S01

PJRAS3X2S01

PJRAS2X2S01

PJRAS4X2U01

PJRAS1X3S01

PJRAN3X1U02

PJRAS1X3U01

Switchcraft, the industry recognized leader in audio-video • Shielding and grounding

connectivity, introduces the addition of a comprehensive line of • Bulkhead mounting screw

PCB Mount RCA Jacks and Jack Sets. Switchcraft’s newest • Colors

product family addresses the requirements of the most critical • Plating

audio and audio/video applications. 1, 2, 3, 4, 6, and 8 position

SPECIFICATIONS

ELECTRICAL

jack sets are offered in a variety of color combinations with

numerous plating, grounding, shielding, mounting, and

Temperature Range: -25 to +80°C

Rated Voltage: 34V DC or AC

Withstand Voltage: 500V

justification options.

FEATURES AND BENEFITS

• High temperature plastic housings and long life contacts

• Snap fit PCB contacts and housings

• Low profile footprint

Rated Current: 2A DC or AC

Dielectric Strength: 500V AC @ 1 minute

Contact Resistance: <30 mohms

Insertion Force*: <29.4N

• Numerous options and configurations

Extraction Force*: 1N to 29.4N

* Depends Upon Mating Plug

APPLICATIONS

• Audio

• Video

MATERIAL AND PLATINGS

Housing: UL94-HB Rated, ABS

Insulators: ABS

Ground Shell and Terminal: Nickel or Gold Plated, Copper Alloy

Terminals: Tin Plated Copper Alloy

• General Purpose Electronics

OPTIONS

• Right angle and straight PCB mount

• Horizontal and vertical justification

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

126 ^{PHONO JACKS AND PHONO JACK SETS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS AND PHONO JACK SETS (continued)

2 POSITION PCB MOUNT

1 POSITION PCB MOUNT

Part Number

PJRAN1X1U01

PJRAN1X1U02

PJRAN1X1U03

PJRAN1X1U04

Call factory

Color

Black

White

Red

Part Number

Color

PJRAN2X1U01

PJRAN2X1U02

PJRAS2X1S01

PJRAS2X1S02

PJRAS1X2S01

Red/White

White/Red

Red/White

White/Red

Yellow

Green

Blue

Red

White

Call factory

PJRAS1X2S02

White

Red

PJRAS1X1S01

PJRAS1X1S02

PJRAS1X1S03

PJRAS1X1S04

Call factory

Black

White

Red

4, 6, & 8 POSITION PCB MOUNT

Yellow

Green

Blue

Part Number

Color

PJRAS2X2S01

White x 2

Red x 2

Call factory

PJRAS3X2S01

PJRAS3X2S02

PJRAS4X2U01

White x 3

Red x 3

3 POSITION PCB MOUNT

Red/White/Yellow

Part Number

Color

PJRAN3X1U01

PJRAN3X1U02

PJRAS3X1S01

PJRAS3X1U03

PJRAS1X3S01

Red/Yellow/White

Red/Green/Blue

Red/White/Yellow

Red/Green/Blue

Red

White x 4

Red x 4

COMBINATION PHONO AND S-VIDEO PCB MOUNT

Part Number

Color

White

Yellow

PJRAN3X1U02

PJRAS1X3U01

Red/White/Yellow

PJRAS1X3S02

Green

Blue

Red

Yellow

White

Red

Ordering Information (Contact factory for color, shielding, grounding, justification options.)

PJ

RA

S

#

X

#

S

01

AU

Phono Jack

RA - Right Angle

ST - Straight

S - Screw(s)

N - No Screws

1,2,3, or 4

By

1,2, or 3

S - Shielded

U - Unshielded

AU/Gold

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{PHONO JACKS AND PHONO JACK SETS}127

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS AND PHONO JACK SETS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

128 ^{PHONO JACKS AND PHONO JACK SETS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS AND PHONO JACK SETS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{PHONO JACKS AND PHONO JACK SETS}129

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PHONO JACKS AND PHONO JACK SETS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

130 ^{RIGHT ANGLE MINIATURE POWER JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RIGHT ANGLE MINIATURE POWER JACKS

RASM 722

RASM 732P

RASM 712

RASM752STR

RAPC742

RAPC732OF

RASM752TR

RASM742TR

Pin Size* Description

SPECIFICATIONS:

Part Number

RAPC712

RASH712

0.100"/2.5mm

Right Angle, PC mount

Right Angle, hybrid mount

Materials: Housing: Thermoplastic

Terminals:

RAPC700:

Sleeve: Silver plated copper alloy

Tip: Nickel plated, copper alloy

RAPC742, RASM742TR, RAPC732OF, RAPC742OF,

RAPC752, RAPC752S, RASM752TR, RASM752STR:

Sleeve and tip: Silver plated tin

Shunt: Silver plated copper alloy

RASM700, RASH700:

Sleeve: Tin plated copper alloy

Tip: Nickel plated copper alloy)

RASM712

RAPC722

RASH722

RASM722

RAPC732

RAPC732OF

RASH732

0.100"/2.5mm

0.080"/2.0mm

0.050"/1.3mm

0.040"/1.0mm

Right Angle, SMT mount

Right Angle, PC mount

Right Angle, hybrid mount

Right Angle, SMT mount

Right Angle, PC mount

Right Angle, PC mount¹

Right Angle, SMT mount

Right Angle, hybrid mount

Right Angle, PC mount

Right Angle, PC mount¹

Right Angle, SMT mount²

RASM732

RAPC742

RAPC742OF

RASM742TR

RAPC752

RAPC752S

RASM752TR

ELECTRICAL

Current Rating: 3A

(RAPC700, RASH700, RASM700: 5A)

Contact Resistance: <50 mohms

Insulation Resistance: 100 mohms min.

(RAPC700, RASH700, RASM700: 30 megohms

@100V DC)

0.025"/0.65mm Right Angle, PC mount

0.025"/0.65mm Right Angle, PC mount³

0.025"/0.65mm Right Angle, SMT mount²

RASM752STR 0.025"/0.65mm Right Angle, SMT mount⁴

Note: Contact factory for specific information on tape and reel options. *Pin Size

(in/mm) 1. Open Frame 2. Tape and Reel. 3. Shielded 4. Tape and Reel, Shielded.

Note: Available with P locating post as an option.

Dielectric Withstanding Voltage: 250 VAC@ 1 minute

Note: Available with tin-plating as a special order.

Note: Available with Hi-temp material, contact factory for details.

MECHANICAL:

Lifecycles: 5,000 min.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

RIGHT ANGLE MINIATURE POWER JACKS

131

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

RIGHT ANGLE MINIATURE POWER JACKS (continued)

RAPC 712/722/732

RASM 712/722/732

RASH 712/722/732

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

132 ^{RIGHT ANGLE MINIATURE POWER JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RIGHT ANGLE MINIATURE POWER JACKS (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{RIGHT ANGLE MINIATURE POWER JACKS}133

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

RIGHT ANGLE MINIATURE POWER JACKS (continued)

RAPC752

RASM752TR

PC BOARD LAYOUT

COMPONENT SIDE

PC BOARD LAYOUT

COMPONENT SIDE

RAPC752S

RASM752STR

PC BOARD LAYOUT

COMPONENT SIDE

PC BOARD LAYOUT

COMPONENT SIDE

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

134 ^{STRAIGHT MINIATURE POWER JACKS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

STRAIGHT MINIATURE POWER JACKS

712A

PC712A

L722A

2C1072

L712RA

Insulators: Rigid Plastic

Hardware: Supplied with one P2439 nickel plated copper

alloy hex nut, and one P2441 nickel plated steel flat washer

FEATURES:

• Automatic switch over from AC to DC

permitted by sleeve shunt spring.

• Split center pin shaped to hold mating plug firmly.

• Bushing length available as 0.219" or extended

0.319" to permit use in thicker panels.

• Non-turn mounting possible using standard

“D” shape bushing.

• Insulated mounting hardware available.

• Right angle versions offer “kinked” PC

terminals for added board retention.

ELECTRICAL:

Current Rating: 5A, 12V DC resistive

Contact Resistance: 0.01 Ohms max. (initial),

0.02 Ohms max. (after humidity, durability exposure),

0.10 Ohms max. (after salt spray)

Insulation Resistance: 10,000 Mohms min. (initial),

1,000 Mohms min. (after humidity, durability exposure)

Dielectric Withstanding Voltage: 500 VAC max.

MATERIALS:

Housing: Thermoplastic

Bushing: Plated copper alloy

Terminals: Plated copper alloy

MECHANICAL:

Lifecycles: 10,000 cycles min.

Part Number

Pin Size*

Description

Typical Mating Plug

712A

712RA

L712A

L712RA

PC712A

PCL712A

722A

722RA

L722A

L722RA

PC722A

PCL722A

732A

732RA

PC732A

2C1072

0.100"/2.5mm

0.080"/2.0mm

0.050"/1.3mm

Solder lugs

760

761K

760

761K

S760

S761K

S760

S761K

860

Right angle PC terminals

Solder lugs, long bushing

Right angle PC terminals, long bushing

Straight PC terminals

Straight PC terminals, long bushing

Solder lugs

Right angle PC terminals, long bushing

Solder lugs, long bushing

Right angle PC terminals, long bushing

Straight PC terminals

Straight PC terminals, long bushing

Solder lugs

Right angle PC terminals

Straight PC terminals

Jack covers for 712A and 722A

860

Note: For insulated mounting order P2442 phenolic flat washer and S4263 swedged fiber washer.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

STRAIGHT MINIATURE POWER JACKS

135

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

STRAIGHT MINIATURE POWER JACKS (continued)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

136 ^{VJ SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

See page 193 for Patch panel information.

VJ SERIES

VJHD*75TX

Ordering–Individual Jacks

Part Number

VJHD*75TX

VJHD*NTX

VJSD*75TX

VJSD*NTX

Type

HD

SD

Description

Terminated

Non-terminated

Terminated

VPP24K3HD75T

SD

Non-terminated

*Add “N” for non-normalled version

FEATURES AND BENEFITS

• HD Series meets SMPTE 292M Specifications

• SD Series has a bandwidth from DC to 1.75GHz

• Jacks feature rugged heavy duty housings

SMITH CHART

(TYPICAL)

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts:

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

NON-NORMALLED

TERMINATED

NORMALLED

TERMINATED

NORMALLED

NON-TERMINATED NON-TERMINATED

NON-NORMALLED

ENVIRONMENTAL

Operating Temperature: – 40ºC to 65ºC

Storage Temperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202,

Method 107

Moisture and Humidity:

Per MIL-STD-202, Method 106.

The HD Series meets SMPTE 292M

specifications for high definition video

signaling, covering a bandwidth range

from DC to 2.4GHz. The SD Series is

perfect for serial digital, with a bandwidth

from DC to 1.75GHZ.

FREQUENCY (MHz)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

MVJ SERIES

137

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

See page 196 for Patch panel information.

MVJ*75T

MVJ SERIES

FEATURES AND BENEFITS

• Midsize video jacks rated from DC to 3 GHz

• Available in terminated or non-terminated configurations

MIDSIZE VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 3.0 GHz

MVP32K3*75T

Characteristic Impedance: 75 ohms

Return Loss: See Typical Return Loss Chart

Insertion Loss: See Typical Insertion Loss Chart

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .048 pin diameter

MECHANICAL

Ordering Information

Part

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

Number

MVJ*75T

MVJ*NT

Jack

HD

Description

Terminated

Non-terminated

*Add “N” for non-normalled version

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts: Copper alloy,

gold plated

BNC Insulators: Teflon

Actuators: Thermoplastic, UL94V-0 rated

ENVIRONMENTAL

Operating Temperature: – 40ºC to 65ºC

Storage Temperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202,

Method 107

Moisture and Humidity:

Per MIL-STD-202, Method 106

SMITH CHART (TYPICAL)

RETURN LOSS (TYPICAL)

FREQUENCY (MHz)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

138 ^{MIL-TYPE 1/4 PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MIL-TYPE 1/4" PHONE PLUGS

3-CONDUCTOR

2-CONDUCTOR

482, 483

420, 425

430

480 (.206")

440, 445

484 (.206")

FEATURES

SPECIFICATIONS

Designed for high quality communication equipment to meet

military requirements, This series features one-piece tip rod

and one-piece sleeve and plug body, assembled together into

a mode as inserts, providing a finished plug with complete

continuity of thermoplastic insulation between top rod and

plug sleeve. Internal (invisible externally) interlock mechanically

engages the metal and plastic components providing a

realistic lock to prevent parts shifting. Design and material in

accordance with MIL-P-642(A), MIL part number molded or

stamped on handle, manufacturer’s trademark (as required

by MIL specification) appears on plug body.

Tip Rod, Body and Screws: Copper alloy, natural finish.

Terminals: Tinned copper alloy.

Insulation: Thermoplastic, per MIL-P-22985, Type II, Class 1.

Handles: Thermoplastic, Type 6, per MIL-M-20693, Type II.

Shielded; machined from copper alloy, nickel-plated.

STRAIN RELIEF CLAMP

For MIL-type Littel-Plug phone plugs. P2380 conforms to

Specification SC-A-7674-F - supplied with Plug Numbers 430, 440,

445 and 470. P2381 meets Specification MS-35762 - supplied with

Plug Number 480 and Extension-Jax^®phone jack, Number 820.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

LITTEL PLUG^®PHONE PLUGS

139

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LITTEL PLUG^®PHONE PLUGS

Number

483NCP

Number

482NCP

Number

485NC

FEATURES AND BENEFITS

• 3 conductor plug

• Designed for high quality communication

equipment

• One-piece tip rod ensures electrical continuity

• Brass plug finger versions meet MIL specifications

• ‘N’ and ‘NC’ suffix versions have nickel-plated

plug fingers, excellent for audio applications

• ‘NC’’ suffix option has rugged, heavy duty

cable clamp, solder terminals for easier

solderability and assembly. Metal shielded handle

• ‘NCP” - plastic handle

SPECIFICATIONS

Plug Finger: Brass, natural finish or nickel-plated

Terminals: Brass, electro-tinned

Insulation: Ethyl cellulose, per MIL-P-22835, Type II,

Class 1, or acetal resin

Handles: Plastic-nylon molding plastic, Type 6,

per MIL-M-20693, Type II. Shielded metal handle with red,

black or nickel finish

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for more information.

3. Mating jacks available.

PART NO. 482NC, 482NCP, 483NC, 483NCP, 485NC

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

140 ^{LITTEL PLUG}^®^{PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LITTEL PLUG^®PHONE PLUGS

MIL

Part Number

None

Part Number

482N

Conductors

Terminals

Screw

Handle

Red

Notes

Plastic handle, nickel

plated plug finger

3

482NC

482NCP

483N

3

Cable Clamp

Screw

Shielded

Red

None

Red metal handle, nickel

plated plug finger

Plastic handle,nickel

plated plug finger

Plastic handle, nickel

plated plug finger

Black metal handle,nickel

plate plug finger

Black plastic handle, nickel

plated plug finger

Nickel plated handle,nickel

plated plug finger

Black

483NC

483NCP

485NC

Cable Clamp

Shielded

Black

Shielded

480 SERIES PART NUMBERING CHART

Part

number

480

206" dia. 1/4" dia.

Brass

Nickel

finger

Handle

Material

Plastic

Metal

Red

Black

handle

•

Nickel

Standard

Large

finger

handle

cable clamp

•

482

•

482N

•

482NC

482NCP

483

•

Plastic

Metal

•

483N

•

483NC

483NCP

484

•

Plastic

Metal

•

485NC

•

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{MIL-TYPE 1/4 PHONE PLUGS}141

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MIL-TYPE 1/4" TWIN PHONE PLUGS

Number 411

Number 414

Number 412

Number 415

Fingers of 414 are .25" diameter and mate with Switchcraft

type MT389 Twin-Jax^®, MT333B, MT336 MT-Jax^®, and other

jacks having .25" inside diameter sleeves and mounted

on .625" centers. 415 has a .25" diameter finger and a .206"

diameter finger to provide automatic polarization. Fingers mate

with Switchcraft MT332B and MT342B MT-Jax, respectively.

FEATURES

Design and material strictly in accordance with Specification

MIL-P-642(A), MIL part number molded or stamped on

handle, manufacturer’s trademark (as required in MIL

Specification) appears on plug body. Ideal for use in broadcast

and recording studios, military, industrial and telephone

switchboard applications, instrumentation and telemetry.

STRAIN RELIEF CLAMP

Individual plugs, featuring one-piece tip rod and one-piece

sleeve and plug body, with complete continuity of

thermoplastic insulation between plug elements, are placed

into handles to provide a double Twin-Plug^®plug (two

electrically-independent 2-conductor plugs spaced .625"

center-to-center, with self-alignment feature). 411, 414 and

415 Twin-Plug plugs have provision for use of Cord Clamp

Number S2674. 412 Twin-Plug has external Cord Anchor.

Natural brass. For use only with 411, 414, 415 Twin-Plug,

S2674.

SPECIFICATIONS

Tip, Rod, Ring Sleeve, Body, Screws: Copper alloy, natural

finish. Number 412 Handle Screws - iridescent iridite overplating.

Terminals: Tinned copper alloy. (Latest MIL Specifications

no longer specify terminals; terminal furnished is the type

referenced as TM-89).

6-conductor Twin-Plug, 414 and 415, provide two

electrically-independent 3-conductor plug fingers spaced on

.625" centers. Fingers are insulated from each other and each

provides tip, ring and sleeve connections. Black plastic handle

is notched to indicate polarity. Accepts standard 6-conductor

cables. Handle has provision for use of Cord Clamp, S2674.

Insulation: Thermoplastic; per MIL-P-22985, Type II, Class 1.

Handle: Thermoplastic on 411, 412, 414 and 415, per

MIL-P-22985, Type II, Class 4. Molded black thermoset

plastic per MIL-M-14F.

Part No. Conductors

Terminals "Typical Mating Jack1"

Mil No.

Notes

411

412

414

2

3

Screw

MT388

MT389

M642/9-1

Provision for internal cord clamp (not included)

MILPJ289. Similar to WECo289B

---

6-circuit plug, 2 electrically-independent 3 conductor

fingers, .25" fingers. Provision for internal cord clamp

(not included) Similar to WECo 338A. 425A-3

415

3

Screw

MT332B &1, MT342B

---

6-circuit plug, 2 electrically-independent 3 conductor

fingers, one .25" finger, one .206" finger. Provision for

internal cord clamp (not included)

1. Switchcraft Part Numbers. See Jacks Section for other mating jacks.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

142 ^{MIL-TYPE 1/4 EXTENSION JACKS AND TELEPHONE PATCH ADAPTERS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MIL-TYPE 1/4" EXTENSION JACKS

Number 820

FEATURES

Cable jack meets requirements of Specification MIL-J-641(A), Type

Number JJ-026. Mates only with MIL-type plugs PJ-054 and PJ-540.

Switchcraft 430.

SPECIFICATIONS

Body and Terminal Screws: Copper alloy, natural finish.

Springs: Punched from special copper alloy.

Stack Insulation: Rigid plastic spacers Rigid plastic tubing.

Handle: Same as plug handle above.

Stack Screws: Stainless steel.

Part

Number

820

Typical Mating

Plug¹

Handle

Part Number

M1015

MIL

Part Number

M641/4-1

Conductors

Terminals

Screw^{2, 3}

Handle

Black

2

430

1. Switchcraft Part Number See Jacks Section for mating jacks. 2. Switchcraft replacement screw. P1070, Terminal P1069 (2 each required)

3. See previous page for strain relief clamp.

TELEPHONE PATCH ADAPTERS

TAD3

TAD2

3-conductor

2-conductor

FEATURES

SPECIFICATIONS

Compact patch adapters convert standard full-size phone jacks to Tip Rod, Ring, Sleeve Body and Screws: Copper alloy,

standard miniature phone jack connections with maximum natural finish.

convenience and reliability at a minimum cost. Eliminates

cross-patching problems and need for combination patch cords with

standard phone plug on one end and a miniature phone plug on the

other. Adapters are 100% compatible with Switchcraft^®

telephone type and military phone jacks and miniaturized

tini-telephone patching system components, as well as equivalent

industry standard phone plugs.

Insulation: Injection-molded plastic.

Jack Springs: Formed copper alloy.

Screw, Spring Retaining:

TAD2 - #2-64, steel. Part Number P1616 (one required).

TAD3 - #2-64, brass. Part Number P1070 (two required).

Ring Insulations (TAD3 only): Kraft paper sleeve.

Handle: Molded blue thermoplastic with die-stamped

identification legend. TAD2 Handle, (Part Number M1487),

and Retaining Screw, (Part Number T1677), one required.

TAD3 Handle, (Part Number M1488), and Retaining Screw,

(Part Number T1990), one required.

TAD2 – 2-conductor adapter. Plug finger meets specifications for

MIL plug PJ-047 (MIL-P-642). Fits Switchcraft T-Jax^®, M-Jax^®,

MIL-approved MT-Jax^®, and other industry-standard phone jacks

with .250" inside diameter sleeves. The .552" diameter handle

accommodates jacks on .625" centers. For quick identification,

TAD-2 is stamped on the blue handle - will not wear off with

constant use. Miniature 2-conductor jack built into plug body,

accepts miniature phone plugs with .173" diameter fingers, such

as Switchcraft tini-telephone^®plugs, Series TT200 and TT250,

and other standard miniature telephone plugs. TAD3 is a

3-conductor version of TAD2. Finger configuration meets

requirements of PJ-051 (MIL-P-642). Finger incorporates dead

ring to minimize plug and jack wear. Blue handle has diameter

of .444".

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{MINIATURE TELEPHONE PLUGS}143

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MINIATURE TELEPHONE PLUGS

TT253NC

TT253 and TT254

TT251 and TT252

Removing handle from plug body can be

easily accomplished by lightly squeezing

the knurled area of the handle and

twisting 30° counter-clockwise.

Patch cords such as Switchcraft Series TT700 (or other .216"

diameter cable) are easily attached to Series TT250 by screw

terminals.

.173" MINIATURE PHONE PLUGS FEATURES

2- and 3-conductor miniature non-shorting telephone plugs

designed for use with TT-Jax^®, Unijax^®, and other phone jacks

with a .176" inside diameter bushing. Approximately 1/2 the

size of standard phone plugs, yet retains the uniformity,

dependability and quality of MIL-type phone plugs.

FEATURES AND BENEFITS

• Designed for pro audio applications

• 3 Conductor

TT-Plug^®Miniature Telephone Plugs are the first to offer

2- and 3-conductors in an attachable type with twist handles

for quick assembly. Series TT250 phone plug is available with

red or black handles. Other color handles available on special

order. Also available with nickel-plated plug fingers. (Add “N” to

part number: 253N, 254N).

• .173" (4.40mm) plug finger diameter

• One-piece tip rod ensures high reliability

• Complete continuity of thermoplastic insulation

between conductors

• Internal keying of all parts preventing shifting

and shorting

• Solder terminals for easier termination and assembly

• Large cable clamp for shield termination and strain relief

• Black or red handles

The TT253NC and TT254NC offer the same nickel-plated plug

fingers as the ‘N’ versions, but also includes cable clamps and

solder terminals for easy assembly.

Plugs feature a one-piece tip rod, ring and a one-piece sleeve

with integral plug body, assembled together into a mold as

inserts. Providing complete continuity of thermoplastic insula-

tion between tip rod, ring and sleeve. Internal interlock of all

parts prevents shifting and shorting under extreme rugged

usage.

Internal 12-24 threads in end of plug body are intended for

threading over outer jacket of a patch cord to provide a supe-

rior cable anchor.

SPECIFICATIONS

Tip Rod, Ring, Sleeve and Body: Copper alloy,

natural finish.

Terminals and Terminal Screws: Copper alloy,

natural finish.

Insulation: Thermoplastic. Handle: Molded plastic

Part

Handle

Number

Conductors

Terminals

Color

Part Number

Description

TT251

TT252

TT253

TT253N

TT253NC

2

3

Screw

Solder

Black

Red

Black

T2302

T2315

T2307

T2324

Mil-type M642/13-1

Nickel-plated plug

Nickel-plated plug,

tinned solder terminals

Mil-type M642/13-2

Nickel-plated plug

Nickel-plated plug,

tinned solder terminals

TT254

TT254N

TT254NC

3

Screw

Solder

Red

T2301

T2325

2P2003

3

Screw

None

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

144

.173 MINIATURE TELEPHONE PLUGS BANTAM TYPE

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

.173" MINIATURE TELEPHONE PLUGS BANTAM TYPE

FEATURES

Miniature telephone twin plugs with two 2-conductor or two

3-conductor fingers, designed to mate with TT Twin-Jax^®,

TT-Jax^®, and other phone jacks with a .176" inside diameter

TT263

bushing and compatible tip and ring springs. Approximately

TT261

1/2 the size of standard phone plugs; yet retains uniformity,

dependability of high-quality phone plugs. The phone plugs

are exceptionally light, small and rugged. Plug fingers can

easily be removed and replaced.

• Minimum Space: Plugs fit .313" centers, horizontally

or vertically.

• Self-Aligning: Plug fingers compensate for minor

variations in jack spacing.

TT261

• Polarizing: Handle notches identify location of each finger.

• Tip Monitoring: Handle ports permit probe insertion to

monitor tip circuits.

• Terminating and Looping Plugs: OEMs can fabricate

cross-wired plugs, i.e., tip-to-sleeve, tip-to-ring, etc.,

according to individual requirements. OEMs can also

wire-in resistors, RCL networks, etc. for standard and

special terminating applications. Switchcraft will build

looping and terminating TT-Twin Plugs on special order,

where quantities warrant.

TT263

• Sleeve Plugs: For looping, terminating and single cable

applications, sleeve plugs seal off unused handle open-ing(s).

Sleeve plugs also make a bridged (common) sleeve

connection by holding braided shield in place in second

plug.On special order, TT-Twin Plugs can be supplied

with one 2-conductor finger and one 3-conductor finger.

TT263: 6-circuit plug consists of two electrically-independent

3-conductor fingers with black handle. Can use single or dual

cables for two electrically-independent 3-conductor fingers or

common tip, ring and/or sleeve circuits.

• Ease of Assembly/Disassembly: Refer to illustration below

for assembly/disassembly procedure; no handle retaining

screws required. Tip and ring terminations are screw-type

screws supplied).

Typical

Mating

Handle

Part

Number

T2300-2

T2316

Part

MIL Type

Number

–

Number¹Cond. Terminals Jack²

Handle

Black

TT261

TT263

2

3

TT31

TT32B

Screw³

M642/13-3

SPECIFICATIONS

1. TT-Twin Plug plugs can be supplied with one, 2-conductor plug finger and

one, 3-conductor plug finger in the same handle (on special order).

2. Switchcraft Part Numbers. See additional mating jacks in this section.

3. Switchcraft Replacement screw P2240, Terminal P2642. 2 each required

with 2-conductor twin plugs; 4 each required with 3-conductor twin plugs.

4. Replacement Hole Plug Switchcraft T2318 (Black) T2319 (Red).

Tip Rod, Ring, Sleeve and Body: Copper alloy,

natural finish.

Terminals and Terminal Screws: Copper alloy,

natural finish.

Insulation: Thermoplastic.

Handle, Sleeve Plugs: Molded plastic.

LIP

NOTCH

BRAIDED

SHIELD

1.

2. & 3.

1. DISASSEMBLY: Place plug on edge as shown. Push down

and back on metal lip on finger (inside notch) with small

screwdriver and slip plug finger out of handle. Turn plug

over and repeat for other finger.

FINGER

4. LIP ON

NOTCH

FINGER

2. CABLE INSTALLATION: Fold braided shield on cable back

over insulation. Insert leads through rear of plug finger, and

screw finger (clockwise) onto cable with twisting motion

until lead terminations lineup with threaded tip and/or ring

openings. Fasten terminals on both fingers with screws

provided.

GROOVE

INTERNAL RIB

3. To bridge sleeves (common connection), place free end of

braided shield in remaining finger sleeve opening. Press

sleeve plug firmly in place.

4. ASSEMBLY: Align grooves in fingers with internal handle

ribs and insert fingers into rear of handle. Push fingers in

until lips or rear of fingers snap into notches on handle.

TT261: Two electrically-independent 2-conductor fingers in a black

handle. Can be used with single or dual cables for independent tip

circuits with common sleeve or separate sleeve circuits.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

®

"

^{1/4 COMMERCIAL PHONE PLUGS – LITTEL-PLUG PLUGS}145

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" COMMERCIAL PHONE PLUGS

2-CONDUCTOR LITTEL-PLUG^®PLUGS

3-CONDUCTOR LITTEL-PLUG^®PLUGS

Numbers 240, 245,

250, 255 (typical)

Numbers 280, 281,

285, 285L, 288 (typical)

Number 260 (typical)

Number 290 (typical)

2-CONDUCTOR PLUGS PART NUMBERS

FEATURES

• Heavy duty machined copper alloy handle (shielded

versions), tip and body for unsurpassed ruggedness.

• Bright nickel plating on exterior surfaces will not chip

or corrode.

• Solder terminals are tin electroplated for ease of soldering.

• One-piece tip rod staked into tip terminal ensures

electrical continuity

• Heavy duty cable clamp provides secure strain relief.

• The proven industry standard phone plug for audio

applications. Beware of imitations!

• Shielded handle versions recommended for applications

where electromagnetic interference and physical abuse

may occur.

Part

Number

Typical

Mating Jack²

Handle Part

Number

Handle*

Black

Terminals

Screw³

Screw³with

240

◊M1002

◊C240

Black

Cable Clamp

Screw³

Screw³with

245

Red

◊C245

◊M1003

Cable Clamp

Solder Lug &

Cable Clamp

250

255

Black

Red

◊M1002

◊M1003

11

Screw³

Screw³with

270

Shielded

◊C270

Handle:

T10581

Insulator:

A10071

Cable Clamp

SPECIFICATIONS

Shielded¹

Shielded⁴

Shielded^{4, 5}

Shielded¹

Shielded^{4, 5, 6}

280

281

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug - Tinned copper alloy.

Screw: Tin-plated (screws size 3-48).

Handles: Molded - black or red plastic. Shielded - machined

Nickel-plated copper alloy. Tubular insulator inside handle.

Solder Lug &

Cable Clamp

285

288

T2323

285L

2P1298

Solder Lug &

Cable Clamp

Without Handle

Screw³

◊2P1495

3-CONDUCTOR PLUGS PART NUMBERS

260

267

269

290

Screw

Black

◊M1002

◊M1003

Solder Lug &

Cable Clamp

Screw³

Red

Shielded

Handle:

T10581

Insulator:

A10071

12B

Solder Lug &

Cable Clamp

No. 280 typical – shown with solder lug terminals,

cord clamp and shielded handle.

297

Solder Lug &

Cable Clamp

◊2P1248

Without Handle

* Additional plug handle colors available (P2714) green, (M1111) blue,

(M1235) gray. Fits any plug on which Numbers M1002, M1003 are standard.

1. Wide insulator between tip and sleeve allows use of 2-conductor plug in

3-conductor jack without shorting.

2. Switchcraft Part Numbers. See Mating Jacks Section.

3. Replacement Screw Part Number P10292 (2-conductor plugs require

2 screws; 3-conductor plugs require 3 screws).

4. Unassembled.

5. Larger cable clamp to accommodate larger diameter cables.

6. Handle has .375" (9.53mm) diameter hole to accommodate larger

diameter cables.

◊ Special order only. Contact Switchcraft.

No. 280 typical – shown with screw-type terminals,

plastic handle.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

146 ^{1/4 COMMERCIAL PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" COMMERCIAL PHONE PLUGS (continued)

Switchcraft^®commercial 2- and 3-conductor phone plugs are

available with a logo handle in addition to the plain handle. The

Switchcraft^®name appears prominently on the shielded handle

so the plugs can no longer be easily confused with “copycat”

plugs found on the market today. Knurling on handles provides a

convenient, positive fingertip grip for connect and disconnect.

Plugs are available in the following popular variations:

1. 1/4" diameter finger, 2-conductors.

2. 1/4" diameter finger, 3-conductors.

3. .206" diameter finger, 2-conductors.

Plug handles accept cable up to .290" diameter.

SPECIFICATIONS

Sleeve: Tip and Body: Plated copper alloy.

Terminals: Solder lug: Copper alloy, electro-tinned;

Screw: Tin-plated (screw size #3-48).

Handles: Nickel-plated zinc (tubular insulator inside handle).

PART NUMBERS

NOTE: Plugs have 1/4" finger diameter unless otherwise specified.

Logo

Plain

Typical

Handle Handle

Description

Mating Jack

2-CONDUCTORS

570

580

581

585

270

280

281

285

Screw terminals. Shielded handle.

Solder lug & cable clamp. Shielded handle.

Solder lug & cable clamp. Shielded handle. Unassembled.

Solder lug & cable clamp. Shielded handle. Unassembled. Larger cable clamp

accommodates larger cables.

11

588

288

Solder lug & cable clamp. Shielded handle. Wide insulator between tip and sleeve

makes possible use as a 2-conductor plug in 3-conductor jack without shorting.

S580

S280

Solder lug & cable clamp. Shielded handle. Plug finger has .206" diameter.

S11

3-CONDUCTORS

590

597

598

290

297

298

Screw terminals. Shielded handle.

Solder lug & cable clamp. Shielded handle.

Solder lug & cable clamp. Shielded handle. Locking feature.

12B

12B, 133

1. Other mating plugs are available.

2. Replacement screw, Part Number P10292 (2-conductor requires 2 screws; 3-conductor requires 3 screws).

No. 590 (Typical)

No. 570 (Typical)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{1/4 COMMERCIAL PHONE PLUGS}147

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" COMMERCIAL PHONE PLUGS (continued)

2-CONDUCTOR/PLASTIC OR

SHIELDED HANDLES

Popular general purpose plug fits all standard jacks. Available

in both 2- and 3-conductor types. Two-conductor plugs

available with black or red molded plastic, or 3 different

lengths of brass nickel-plated (shielded) handles. 2-Conductor

Special Military Plugs are also available.

Numbers 70, 184

Number 170, 181

FEATURES

• 1-piece tip rod staked into tip terminal insures tightness

of plug.

• All essential conducting members are brass with external

parts nickel-plated.

Number 40

Number 160

• Terminal screws: broad-headed. In production quantities,

screws may be eliminated and terminals hot-tinned for

easier soldering of wire leads to terminals (special order).

• Screw terminals have grooves which accommodate

1 or 2 cord tips.

• Thermoplastic handle insert for greater insulation.

• Plugs accept up to .25" maximum diameter cable

(parallel or shielded cable).

SPECIFICATIONS

Number 40

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug: copper alloy, electro-tinned.

Screw: steel, tin-plated.

Handles: Shielded: Nickel-plated copper alloy.

Molded: black or red plastic.

Part

Number

Typical

Mating Jack²

Handle Part

Number

Terminals

Handle

40

Black

M1001

Screw

Handle: T10141

70³

Shielded

Insulator: A10063

Number 160

(Replacement

Screw Part No.

P10013)

Handle: T10451

160

Insulator: A10061

11 or

Z15J

Without

Handle

_

2 required

◊2P1251

170¹

182QB

182QBD

Handle: T11231¹

Insulator: A10064

Shielded

Handle: T10141

184³

Shielded

Solder Lug &

Cable Clamp

Insulator: A11372

184L⁴

T2322

Number 170

1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.

Handles: Number T11231, handle; Number T11241, cap; see above for

insulating tube; Number T1125, rubber washer.

2. Other mating plugs are available.

3. Handle has .380" (9.65mm) diameter hole to accommodate

.375" diameter cable.

4. Handle has .451" (11.51mm) diameter hole to accommodate

larger diameter cables.

Number 184

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

148 ^{SILENT-PLUG AND LUG}^®^{PLUG PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

SILENT-PLUG PHONE PLUGS

2-CONDUCTOR PLUGS

Part

Number

Typical

Mating Jack

Handle Part

Number

No. 172

Terminals

Handle

Screw

Silent-Plug plugs have unique circuit-closing device—

stops hums, squeals and pops when plug is removed

from jack. One-piece tip rod assembly insures plug

quality. Utilizes cables up to .25" diameter (parallel or

shielded cable). U.S. Patent No. 2,664,475.

(Replacement

Screw Part No.

P-1011-3)

Two-Piece¹Ins.

Tube A-1006-3

172

Shielded

2 required

11

Two-piece¹Ins.

Tube A-1137-1

SPECIFICATIONS

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Copper alloy, tin-plated.

Shielded²

181

182

Solder Lug and

Cable Clamp

T-1014-1 Handle,

A-1137-2 Ins. Tube

Screw: Cadmium plated (screws size 3-48).

Handles: Shielded machined copper alloy nickel-plated.

Tubular insulator inside handle.

1. 2-piece shielded handle with built-in cable clamp for .25" diameter

cable. Handles: Number T1123-1, handle; Number T1124-1, cap; Number

T-1125, rubber washer. 2. Mylar tube insulation for greater protection.

2-Conductor “Silent Plug”, No. 172

No. 181

No. 182

LUG^®-PLUG PHONE PLUGS

2-CONDUCTOR PLUGS

Part

Number

Typical

Mating Jack¹

Handle Part

Number

M-1002

Terminals

Handle

350

Black

2P-1216

Solder Lug

11

No. 380

Nos. 350, 351, 355

Handle: T-1060-1

380

Shielded

Insulator: A-1007-2

Similar to Littel-Plug phone plug. Same molded handles as

used on Littel-Plug; metal handle, bright nickel-plated, only

1" long. Fits all standard jacks. See drawing for details.

1 Switchcraft part numbers. See Jacks Section for additional mating jacks.

INSULATING

TUBE ON #380

SPECIFICATIONS

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lug: copper alloy, tin-plated.

Screw: plated steel.

Handles: Shielded: Nickel-plated copper alloy.

Molded: black or red plastic.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{AUDIO LOUDSPEAKER PLUGS AND HEAVY DUTY 1/4 PHONE PLUGS}149

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

AUDIO LOUDSPEAKER PLUGS

SERIES 187

Number 187BL (Typical)

The 187 series 1/4" phone plugs are similar to the

Switchcraft^®184 plugs, except that they offer an attractive

tapered handle with a snap-in flex relief. Other features include:

• Larger tip terminal to accommodate wire sizes up to 14 AWG.

• Choice of Satin nickel or black finish.

• Black flex relief bushing can be specified in three different

cable diameter openings for maximum reliability of cable.

• Plug is rated at 15A rms (maximum) for use with audio

loudspeaker applications.

Part Number

Cable

Relief

Bushing

Typical

Mating

Jack¹

Nickel

Finish

187

Black

Finish

187B

SPECIFICATIONS

diameter (inch)

.3 to .33 (regular)

.3 to .355 (large) 11 or Z15J

.2 to .30 (small)

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Solder lugs: tinned copper alloy;

Screw: tin-plated.

Handles: Die-cast zinc. Satin nickel or black finish.

Cable Relief Bushing: Black (thermoplastic elastomer).

187L

187D

187BL

187BD

1. Other mating plugs are available. See Jacks Section.

HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS

• Switchcraft’s 188 is more heavy-duty than

our competitor's biggest 1/4" commercial

phone plugs.

• Large curved tip solder terminal makes it

easier to solder to heavy gauge wires.

• Longer sleeve terminal allows more room

to make sleeve solder connections.

• Extra-large cable clamp securely grips

cable of up to .450" in diameter.

SERIES 188 Plug

• Will easily accommodate some varieties of

four conductor 14 gauge wire and parallel

two conductor 12 gauge wire.

• Bendable tab on sleeve terminal makes

termination easier by holding down cable

while soldering. In addition, such mechanical

retention makes for a superior solder

connection.

• Will handle up to 15 A. rms (maximum).

(continued on next page)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

150 ^{HEAVY DUTY 1/4 COMMERCIAL PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS (continued)

SPECIFICATIONS

SERIES 299 PLUG

Contact Resistance (typical *D.O.M.J.):< 0.020 ohms.

Dielectric Withstand Voltage: 500 VAC (minimum).

Insulation Resistance @ 500 VDC: 2,000 megohms

(minimum).

Insulation Resistance (after MIL-STD-202 Salt Spray):

1,000 megohms (minimum).

Working Voltage: 250 VAC, 140 VDC.

Current Carry @ Working Voltage For 188 Plug

(typical *D.O.M.J.): 15.0 AMPS.

Current Carry @ Working Voltage For 299 Plug

(typical *D.O.M.J.): 6.0 AMPS.

Insert/Withdrawal Force: *D.O.M.J..

Soldering Requirement: ANSI/J-STD-001.

Temperature Range: -40° to + 85° Centigrade

U.L. Component Recognition File No.: E118169.

Life: *D.O.M.J.

Maximum Cable Size For 188 Plug:

12 AWG stranded, up to .450" diameter.

Maximum Cable Size For 299 Plug: .290" diameter.

Part

Number

Maximum

Cable Size

Mating

Jack

299

.290" Diameter

Z15J

MATERIALS

Tip: Nickel-plated copper alloy.

Sleeve: Nickel-plated copper alloy.

Handle: Nickel-plated copper alloy.

Tip Terminal: Copper alloy, electro tin-plated.

Cable Clamp: Copper alloy, electro tin-plated.

Insulators For 188 Plug: Thermojet plastic,

thermoplastic, thermoplastic film, P.P.O.

Insulators For 299 Plug: Thermoplastic,

thermoplastic film, glass epoxy.

*D.O.M.J. – Dependent On Mating Jack

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{1/4 AND .206 COMMERCIAL PHONE PLUGS}151

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" COMMERCIAL PHONE

PLUGS (continued)

.206" COMMERCIAL

PHONE PLUGS

3-CONDUCTOR/PLASTIC OR

SHIELDED HANDLES

PHONE PLUGS FOR

POLARIZED CONNECTIONS

.206" Diameter

Numbers S250, S255

Number 190

Number 60

FEATURES

For applications requiring polarization (use of plugs of different

sizes) to prevent insertion of incorrect equipment Littel-Plug^®

phone plugs featuring a sleeve and tip diameter of .206" are

available. Mate with Number S128 Extension Jax^®and S11

Littel Jax^®jacks. Number S260 used interchangeable with

Military Type M642/51 (Switchcraft Number 480) plugs. Mate

with jacks S12B, S13B, M444, MT342B, MT344B and others.

Number 190A

Part

Number

Typical

Mating Jack²

Handle Part

Number

Terminals

Handle

◊60

◊90

190

Black

M1001

2-CONDUCTOR PLUGS PART NUMBERS

Shielded

T10451

Part

Number

Typical Mating

Jack¹

Handle Part

Number

Solder Lug

12B

Handle: T10141

Shielded

Handle

Terminals

Insulator: A10063

S250

Black

M1002

T10581

A10071

190A,190B

& 190BL

2-piece¹

Solder Lug &

Cable Clamp

S11

S280

Shielded

1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable.

Handles: Number T11231, handle; Number T11241, cap; Number

A10064, insulating tube; Number T1125, rubber washer.

2. Other Mating Plugs are available.

3-CONDUCTOR PLUGS PART NUMBERS

◊ Special order only. Contact Switchcraft.

Screw

(Replacement

Screw Part No.

P10292)

S260

S267

S12B

Black

M1002

2 required

Solder Lug &

Cable Clamp

1. Switchcraft^®mating jacks.

Number 60

Number S260

Number 90

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

®

"

152 ^{1/4 MITI-PLUG AUDIO PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

1/4" MITI-PLUG^®AUDIO PLUGS

Number 174S

FEATURES

• 2-conductor phone plug with full shielding and resistance to

extremely rough usage for electrified audio instruments such

as amplifiers, synthesizers power heads and speaker systems

requiring high-quality audio plugs.

• 3-WAY CABLE STRAIN/STRESS RELIEF: For hours of

trouble-free operation under heavy and abusive use. Plug body

internally threaded for screw-on strain relief for cables from .29"

to .30" diameter, and an additional clamp for additional relief

(and for smaller cables). A heavy copper alloy-plated steel

spring at point of entry to plug keeps cable from folding and

pinching. Flex relief spring recommended for cables with

diameters of .265" maximum only.

• TERMINATING: Tip wire soldered to tip–braid folded back

and secured with cable clamp.

• IDENTIFICATION: Customer or OEM name of logo can be

applied to plastic handles for a minimal charge for personalization.

(Contact Switchcraft for details).

• SPECIAL HANDLE COLORS: Plastic handles molded in

custom colors on special order. Contact Switchcraft for details.

No. 174S

SPECIFICATIONS

Tip Rod & Body: Copper alloy.

Handle: Copper alloy or plastic (black).

Flex Relief Spring: Plated spring steel.

(Part No. P2848).

Strain Relief Clamp: Plated steel.

(Part No. P2380).

Insulation: Thermoplastic, glass reinforced.

No. 176S

2-CONDUCTOR PLUGS

Typical

Mating Jack¹

Part

Number

Handle Part

Number

Handle

Flex Relief

U-Clamp

Spring

None

◊173

Black plastic

Copper Alloy

Black Plastic

Red Plastic

Black Plastic

Red Plastic

M1483

T2313

M1483

◊174S

◊175

◊176S

◊177S

◊178

Spring

None

11

M1483

◊179

None

1. Other mating plugs are available.

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{1/4 FLAT PLUG PHONE PLUGS}153

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

2- OR 3-CONDUCTOR/SHIELDED HANDLE

1/4" FLAT PLUG PHONE PLUGS

Part

Typical

Handle

No. Terminal Mating Jack^{1, 2}Conductor Handle Part No.

228

238

Solder

Lug

11

2

3

Shielded S3067

12B

1. Nickel plated steel handle. Two screws (Part Number P15823) required to

mount handle.

2. Other mating plugs are available.

Series 230

Series 220

3. Accommodates cables from .219" outside diameter to .250" outside

diameter Ideal for music equipment use.

3-CONDUCTOR/PLASTIC HANDLE

.206" DIAMETER SLEEVE AND TIP

Part

No.

Typical

Handle

Terminals

Screw³

Mating Jacks¹

Handle

Part No.⁴

No. 238

Series S230

◊230

Black

M1005

◊235

◊237

◊239

Screw

Solder

Red

Black

Red

FEATURES

12B

• Ideal where conventional long handled plugs are not

suited to design of equipment. “Chassis-hugging” phone

plugs allow cables to be brought out at right angles to

equipment.

◊S230 Screw³

S12B²

Black

1. Switchcraft Part Number Other mating plugs are available.

• Removable plastic cap for easy assembly of wire leads

to either screw or solder lug terminals. Adapter clips on

types 220 and 225 make it convenient to clamp standard

phone tips to terminals.

• Terminals and body of plug mechanically interlocked,

eliminating probability of any shifting.

2. Part Number S230 is the commercial version of military Type PJ068

(Switchcraft Number 480) plug. Mates with S12B, S13B, M444, MT342B,

MT344B Jacks and others. Other mating plugs are available.

For applications where it is desirable to polarize, use plugs of different sizes

to prevent insertion of incorrect equipment. Sleeve and tip diameter of these

plugs is .206" Mates with S830, S1230 Extension-Jax^®jacks and S12B,

S13B Littel-Jax^®phone jacks.

3. Switchcraft Replacement Part Number P10292. 3 screws required.

4. Three screws (Number P1039) required to mount handle.

◊ Special order only. Contact Switchcraft.

• Cover is black or red plastic; plug body is a rugged

assembly of all metal parts.

• One-piece tip rod staked into tip terminal to insure

tightness, no disassembly of tip during use of plug.

• High grade insulation.

• Terminal identification permanently stamped into base

plate adjacent to each terminal. Letter “T” denotes tip

connection; “R” denotes ring sleeve; “S” terminal is the

sleeve or body connection (no identification on types

228, 238).

• Cover molds designed so customer’s name or trademark

inserts can be added. Call for details.

SPECIFICATIONS

Tip Rod and Sleeve: Nickel-plated copper alloy.

Terminals: Tinned copper alloy.

2-CONDUCTOR/PLASTIC HANDLE

Part

No.

Typical

Handle

Terminals

Mating Jack¹

Handle

Part No.³

220

225

Screw

Black

Red

M1005

M1006

227

229

Solder Lug

Black

M1005

M1006

–

11

Red

2P1509 Screw

Less Handle

1. Switchcraft Part Number; see jack section for additional mating jacks.

2. Switchcraft replacement Part Number P10292. 2 screws required per plug.

Clips for phone tips. Part Number S1832.

3. Three screws (Number P1039) required to mount handle.

Handle: Black or red plastic. Numbers 228 and 238,

steel,nickel-plated.

Series 220

Series 230

No. S-230

No. 238 (typical)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

154 ^{RIGHT-ANGLE AUDIO PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RIGHT-ANGLE AUDIO PHONE PLUG

FEATURING 3-PIECE CONSTRUCTION

AND FAST TERMINATION/ASSEMBLY

Switchcraft's 2- or 3-conductor right-angle audio phone plugs

are designed for OEMs and users of commercial phone plugs.

The plugs offer large terminals for easy wiring, and only three

pieces to assemble - handle, insulator and finger/housing

assembly and rugged reliability for stable, long-term,

trouble-free operation.

FEATURES

226

• Easy Termination: Large terminals accept up to 16 AWG

wiring (cables up to .25 inch diameter)

• 3-Piece Assembly: Screw on the handle for quick and

easy assembly; minimizes labor costs.

• Rugged: All metal exterior construction.

• Low Profile: Only 1/2 inch wide. Ideal for crowded,

multi-channel panels. Right-angle handle minimizes

space required behind equipment.

• Knurled Handles: Positive grip during connect/disconnect.

• Rugged Cable Clamp: Isolates pulling and twisting strains.

Typical

Mating

Jack

Part

Number

Description

236

226

3-conductor 1/4" right-angle

commercial plug.

12B, 13B

112B, 113B

SPECIFICATIONS

Tip, Rod and Handle: Nickel-plated copper alloy.

2-conductor 1/4" right-angle

commercial plug

11, 12A

111, 112A

Housing/Sleeve: Nickel-plated.

Tip Terminal: Tin-plated copper alloy.

Sleeve (Clamp) Terminal: Tin-plated steel.

Insulation: Thermoplastic.

Dielectric Withstanding Voltage: 500 Vac.

Insulation Resistance: 50,000 Megaohms minimum (initial).

Operating Temperature: -20°C to +65°C.

No. 236

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{1/4 LOCK-EXTENSION JACKS AND PLUGS}155

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

1/4" LOCK-EXTENSION JACKS AND PLUGS

Number 133

Number 298

FEATURES

SPECIFICATIONS

Lock-Plug Tip Rod, Body, Handle and Coupling Ring:

Nickel-plated copper alloy.

Terminals: Brass, electro-tinned. Solder lug design,

cable clamp part of sleeve terminal.

Insulation: Rigid plastic.

Modified Littel-Plug^®phone plug, 2- or 3-conductor, with

coupling ring that can be threaded to thread projection of

mating panel jack or to threaded end of the Lock-Extension

Jax^®. Locks connection after plug has been fully inserted

into its mating panel jack or Extension Jax^®.

LOCK-EXTENSION JAX^®

Housing (or Sleeve) and Handle:

Nickel-plated copper alloy.

Lock-Plug^®makes proper contact to mating jack without

tightening or attaching coupling ring, when rapid disconnect

may be desired. Lock-Plug fits any standard jack with 3/8".-32

thread bushing with .094" of the bushing exposed. Lock-

Extension Jax also will mate properly with standard phone

plugs, where no “lock” requirement exists.

TERMINALS:

Sleeve: Plated steel. Tip and Ring:

integral part of tip and ring springs.

Springs: Spring tempered copper alloy.

Insulation: Molded thermoplastic insert.

Rigid plastic terminal washer.

LOCK-PLUG

Typical

Part

Mating

Handle

Number

282

Cond.

2

Terminals

Jack

12A

Part Number

Notes

Solder

Lug &

Cable

Clamp

T10581

A10071

Similar to Switchcraft Number 297 Littel-Plug

except with coupling ring.

298

3

12B, 133

LOCK-EXTENSION JAX^®

Typical

Mating

Plug

Part

Handle

Number

Cond.

Terminals

Part Number

Notes

Solder

Lug &

Cable

Clamp

Sleeve terminal has cable clamp. Similar to

®

133

3

298

T1485

Switchcraft Number 131 Extension-Jax^®.

133

282

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

156 ^{3.5MM HEAVY DUTY STEREO PLUG}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5 MM HEAVY DUTY STEREO PLUGS

RIGHT ANGLE

35HDBAU

3.5MM STEREO PLUGS

SPECIFICATIONS

Contact Resistance: <0.020 ohms

FEATURES

Dielectric Withstand Voltage: - 250 VAC (min.)

Insulation Resistance @ 500 VDC: 2,000 megohms (min.)

Working Voltage: - 250 VAC, 140 VDC

Current Carry @ Working Voltage: 4 AMPS

Insert/Withdrawal Force: - Typical 2.5/2 pounds

Temperature Range: 0° to 66° Centigrade (operating)

Passed MIL-STD-202F Method 107G (Thermal Shock), and

Method 201 (Vibration)

• Heavy duty 3.5mm plugs for audio, instrument,

other applications.

• Large cable clamps for rugged use.

• Available in straight or right angle.

• One piece tip rods for added durability.

• Available in nickel, gold, and black finishes.

• Large solder terminals for easy assembly.

• Standard handle accommodates cable sizes up to 0.290"

Optional ‘S’ versions accommodate cable sizes up to 0.175"

35HDBN - Black Handle, Nickel Plug

35HDBAU - Black Handle, Gold Plug

35HDNAU - Nickel Handle, Gold Plug

35HDNN - Nickel Handle, Nickel Plug

Life: - 5000 cycles

Maximum Cable Size: - .250? dia.

MATERIALS

Tip Rod: Copper alloy, tin, or gold-plated

Ring: Copper alloy, nickel, or gold-plated

Sleeve: - Copper alloy, nickel, or gold-plated

Handle: Copper alloy, nickel, or gold-plated

Cable Clamp: - C.R.S., tin-plated

Solder Terminal: Copper alloy, tin-plated

Tubular Insulator: Clear plastic

BENEFITS

• One piece tip rod with flat for easy solderability.

• Compliments current line of 3.5 mm jacks.

• Insert molded plug finger.

• Heavy Duty cable clamp provides better strain relief

for larger cables

• Longer cable clamp for easier plug assembly and more

room for solder connections

• Knurl on the back of handle provides ergonomic gripping

surface to tighten plug

ORDERING INFORMATION

1. Order by part number

2. Contact Switchcraft for more information

• Tubular insulator included to prevent solder joints

from contacting handle

• Longer handle for improved gripping surface

and easy plug withdrawal from jack

Part

Number

35HDNN

35HDNNS

35HDBN

35HDBNS

35HDNAU

35HDNAUS

35HDBAU

35HDBAUS

35HDRANN

Description

Plug Finger Handle Notes

Nickel

Gold

Nickel

Black

Nickel

Black

Nickel

Black

Nickel

0.175" handle opening

• Large solder terminal for easy solderability

MARKETS

• Audio

• Consumer electronic equipment

• Broadcast studios

• Home recording equipment

• Audio cable assembly manufacturers

• Instrumentation

0.175" handle opening

Right angle

35HDRABAU Gold

35HDRAAU

Gold

Right angle

• Test equipment

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

"

^{.141 MINIATURE PHONE PLUGS}157

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

FEATURES

.141" MINIATURE PHONE PLUGS

• Miniature 2-conductor Phone Plug for use with Switchcraft

Tini-Jax^®miniature phone jacks. About 1/2 the size of

Switchcraft Littel-Plug^®phone plug. Average net weight,

1/8 ounce.

• Various terminal combinations: (a) Dual purpose sleeve

terminal may be clamped over metal braid or shielded

cables; provides cable anchor. Easily soldered for perfect

electrical connection. (b) Screw terminal design (no cable

clamp) for cable. Terminals that can be more suitably

connected by screws.

• 1-piece tip rod staked into mating terminals; no disassembly

of tip during use of plug. Terminals and body of plug

interlocked mechanically.

• Available in black or red plastic handles or brass nickel-

plated handles for shielding. Can be used with cables up

to .188" outside diameter.

Number 750

SPECIFICATIONS

Sleeve, Tip and Body: Nickel-plated copper alloy.

Terminals: Copper alloy, electro-tinned. Solder lug or

screw type (Screws #0-80).

Handle: Molded black or red plastic.

Copper alloy, nickel-plated.

Part

Number

740

745

750

755

2P1384

770

780

Typical

Terminals

Mating Jack¹Handle

Part No.

M1055

M1056

M1055

M1056

–

Black

Red

Screw²

Black

Solder Lug &

Cable Clamp

41

Red

Less Handle

Shielded

Screw²

T13631

Solder Lug &

Cable Clamp

Number 780

No. 740

No. 750

1. Other mating plugs are available.

2. Switchcraft replacement Part Number P1153. 2 screws required per plug.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

"

158 ^{.097 SUBMINIATURE PHONE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

.097" SUBMINIATURE PHONE PLUGS

Numbers 850, 880

Number 851

FEATURES

MICRO-PLUG

Part

• Subminiature, 2-conductor phone plugs are 1/3 the size

of standard phone plugs, with the uniformity,

dependability, and quality construction of Switchcraft

Littel-Plug^®and Tini Plug^®phone plugs. 50 W soldering

with 60/40 solder recommended for terminating.

Mating

Jacks¹

Handle

Part No.

Number

Terminals

Handle

Black

850

852

T18623

T18622

T18621

–

Black

855

857

Red

• Switchcraft’s 852, 853, 857, 858, 882 and 883 have a

wider insulator between the tip and the sleeve. The wide

insulator prevents the tip of the plug from shorting out

between the tip spring and the sleeve of the jack

during insertion.

Solder Lug

TR2A

Red

880

882

2P1419

Natural

Less Handle

Micro-Plug^®PLUG - Sleeve terminal incorporates cable

clamp. May be clamped over mated braid to anchor

shielded cable; solders readily for perfect electrical

connection. Terminals and plug body interlocked

mechanically. Accommodates cable up to .125"

Combined length, handle and tip: 1.106" outside diameter,

.250" outside diameter handle.

LOCK Micro-Plug^®PLUG - Similar to Micro-Plug plug,

with addition of integral threaded collar that fastens to

bushing of mating jack to prevent accidental disconnect.

Requires at least .05" of exposed and usable thread on

jack bushing to lock securely. Ideal for secure connections

in critical medical and sensitive scientific instruments.

Combined length, handle and tip: 1.046". Various molded

cable assemblies incorporating Micro-Plug Subminiature

phone plugs with plastic handles are available.

LOCK MICRO-PLUG

Part

Mating

Jacks¹

Handle

Part No.

Number

Terminals

Handle

Black

851

853

T23123

T23122

T23121

Black

856

858

Red

Solder Lug

TR2A

Red

881

883

Natural

1. Switchcraft Part Numbers. Other mating plugs are available.

SPECIFICATIONS

MATERIALS

Tip, Rod and Body (also integral Coupling Collar on

Lock Micro-Plug): Nickel-plated copper alloy.

Insulation: Molded thermoplastic.

Sleeve Termination and Cable Clamp:

Tinned copper alloy.

Handle: Anodized aluminum; red, black or natural finish.

No. 850 (typical)

No. 851 (typical)

MECHANICAL

Life rating: 5,000 insertion/withdrawals.

Insertion/Withdrawal Force: 1 pound (depending on

mating jack).

ELECTRICAL

Insulation Resistance: > 100 megohms

Dielectric Withstanding Voltage: 250V AC.

ENVIRONMENTAL

Thermal Range: -55°C to +85°C (non-operating);

-20°C to 65°C (operating).

Thermal Shock: Mil-Std 202, Method 107.

Humidity: Mil-Std 202, Method 106.

Salt Spray: Mil-Std 202, Method 101.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

^{AUDIO ADAPTERS}159

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Part Number 332A (Not shown): 2-cond. phone jack input

to old MC1M-style microphone connector output. Coupling

ring can be screwed back to convert female microphone

connector to male type. Shielded.

AUDIO ADAPTERS

Part Number 336A: 2-conductor phone jack input to a

phono plug output. Shielded.

336B

Part Number 336B: 2-conductor phone jack input to phono

jack output. Shielded.

336A

Part Number 340: Two 2-conductor phone jack inputs

connected in parallel to a 2-conductor phone plug output.

Shielded.

Part Number 345A: Phono plug input to a standard

2-conductor phone plug output. Shielded.

Part Number 349A: Phono plug coupler. Phono Extension

340

Jax^®input to phono Extension Jax output. Shielded.

◊Part Number 352A: Stereo to monaural adapter.

3-conductor phone jack input to 2-conductor phone plug

output. Extra-wide insulator prevents accidental damage

should wrong connection be made. Shielded.

349A

Part Number 361A: Phone plug coupler. Standard 1/4"

inside diameter phone jack input to standard 1/4" inside

diameter phone jack output. Ideal for connecting two

cables terminated with 2-conductor phone plugs. Shielded.

345A

Part Number 362A (Not shown): Phone plug coupler.

Standard 3-cond. phone jack input to standard 3-cond.

phone jack output. Ideal for connecting two cables terminated

with 3-conductor phone jacks. Shielded.

361A

352A

Part Number 363: Phone jack coupler. Standard 1/4"

2-conductor phone plugs at each end to connect two

cables terminated with phone Extension Jax. Shielded.

Part Number 364A: EIA Standard 2-conductor Tini-Jax^®

phone jack input to a standard 1/4" 2-conductor phone

plug output. Shielded.

Part Number 365: EIA Standard 2-conductor Tini-Jax^®

phone jack input to a phono plug output. Shielded.

Part Number 370A: 2-conductor EIA Standard Tini-Plug^®

phone plug (.141" diameter finger) output to phono jack

input. Adapts standard phono plug to small Tini-Plug.

Shielded.

364A

370A

363

Part Number 374: 2-conductor phone jack input to a

2-conductor EIA Standard Tini-Plug (.141" diameter finger)

phone plug output. Adapts standard phone plug to small

Tini-Plug.

365

Part Number 376: EIA Standard Tini-Jax phone jack input

to a 2-conductor Micro-Plug (.097" diameter finger) phone

plug output. Adapts a Tini-Plug phone plug to a Micro-Plug

phone plug.

Part Number 377: Micro-Jax phone jack input to a

2-conductor EIA Standard Tini-Plug (.141" diameter

finger) phone plug output. Adapts a Micro-Plug phone plug

to a Tini-Plug phone plug.

376

374

377

◊ Special order only. Contact Switchcraft.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

160 ^{PHONO PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

PHONO PLUGS

3502RABAU

35581

35585

3502A

3501M

3501MC

3502AAU

3502RAAU

3502

35582

3507

3502ABAU

3504M

3502RA

FEATURES

• Wide variety of styles for a wide range of applications.

• 3502A and 3502RA Series offer solid pin, large solder cups.

• 3558 Series utilize plastic handles for low cost applications.

• 3507 and 3504M have low-loss nylon insulators for

RF applications. Can be used at 1 kW at 30 MHz.

• 3501M and 3501MC have the handle removed for tight spaces

• Options include nickel and gold plated, or black epoxy finishes.

SPECIFICATIONS

MATERIALS

Pin: Nickel or gold plated, copper alloy

Sleeve: Nickel or gold plated, copper alloy

Handle: Nickel or gold plated, or black epoxy finish, copper alloy

(3558 Series: Thermoplastic)

Cable Clamp: Tin, copper alloy

Insulator: Rigid Plastic

ELECTRICAL

Current Carry @ Working Voltage (typical *D.O.M.J.): 6A

Contact Resistance (typical *D.O.M.J.): < 0.20 Ohms

Dielectric Withstanding Voltage: 500 VAC min.

Insulation Resistance @ 500VDC: 2,000 megohms min

Working Voltage: 250VAC, 140VDC

MECHANICAL

Life: *D.M.O.J

Temperature Range: -40∞ C to +85∞ C

*D.M.O.J. –Dependent On Mating Jack

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACKS AND PLUGS

PHONO PLUGS

161

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PHONO PLUGS (continued)

3501M & 3504M

35581, 33582, 33585

3501MC

3502

3502A

3507

3502RA

Part

Number

3502A

3502AAU

3502ABAU

3502RA

3502RABAU

3502RAAU

35581

35582

35585

3502

3501M

3501MC

3504M

3507

330F1

330F2

Description

Nickel

Gold

Nickel

Gold

Typical

Handle

Nickel

Black

Notes

Mating Jack

BP Series

3505F

Nickel

Black

Right angle

Red handle

Black handle

White handle

Gold

Nickel

Plastic

Nickel

Same as 3501M except with cable clamp

Same as 3507 less cable clamp and handle

For RF applications

2 inline jacks to 1 male plug, 4" gray shielded cable

1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable

Nickel

3505F

BP Series

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACKS AND PLUGS

162 ^{MINIATURE POWER PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MINIATURE POWER PLUGS

760

860

760K

S760K

761K

FEATURES AND BENEFITS

• 2-conductor power jacks.

• Hollow center pin available in 3 pin diameters and 2 finger lengths

(See chart below).

• Locking option available for added security in critical applications.

• Molded plastic handles available in black or red.

• Sleeve terminal serves as cord clamp.

INSIDE DIAMETER TOLERANCES (PLUGS)

.050" (.050 - .053)

1.27mm (1.27 - 1.35)

.080" (.080 - .084)

2mm (2.03 - 2.13)

.100" (.099 - .103)

2.5mm (2.52 - 2.61)

860/865:

SPECIFICATIONS

Plug Sleeve and Pin: Nickel-plated copper alloy.

Lockring: Nickel-plated copper alloy.

Lockring Thread Size: 5/16 - 32 UNEF 2B.

Finger Insulator: Molded plastic.

Insulating Washers: Rigid plastic.

Sleeve Terminal: Copper alloy, electro-tinned.

Handle: Molded plastic.

S760/S765*:

760/765*:

OUTSIDE DIAMETER TOLERANCES (PLUGS)

.150" (.149 - .153)

860/865:

Handle Thread Size: 5/16 - 24 UNF 2B.

Electrical: Current (Carry): 5 amps.

3.81mm (3.78 - 3.89)

.218" (.217 - .221)

S760/S765*:

5.5mm (5.51 - 5.61)

ORDERING INFORMATION

1. Order by part number. 2. Contact Switchcraft for more information.

3. ◊ Indicates “special order” only.

.218" (.217 - .221)

760/765*:

5.5mm (5.51 - 5.61)

*includes locking (k) versions

PART NUMBERING and MATING CHART (Power plugs/Power jacks)

Inside

Outside Length Length Locking

Number Diameter Diameter

Tip

Handle

Color

Handle

Part Number

Switchcraft^®

Mating Jack¹

Part

“L1”

.375"

.475"

.375"

.475"

.375"

.475"

.375"

.475"

.375"

“L2” Feature

Insulator

1.42

1.7

No

M1055

M1056

M1055

M1056

No Handle

M1055

M1056

M1055

M1056

No Handle

M1055

M1056

760

765

.100"

.080"

.050"

.218"

.150"

Black

White

Black

White

Black

Red

712A, RAPC712, RASH712, RASM712, PC712A, RA712A

712A, PC712A

Yes

No

Black

Red

760K

761K

1.8

L712A, PCL712A

765K

1.7

712A, PC712A

1.8

Red

766K

L712A, PCL712A

1.42

1.7

No Handle

Black

Red

◊2P1515

S760

712A, PC712A

No

722A, RAPC722, RASH722, RASM722, PC722A, RA722A

722A, PC722A

S765

No

Yes

No

Black

Red

S760K

S761K

S765K

S766K

2P1624

860

1.8

L722A, PCL722A

1.7

722A, PC722A

1.8

Red

L722A, PCL722A

1.42

No Handle

Black

Red

722A, PC722A

No

RAPC 732, RASH 732, RASM 732

865

No

¹See pages 130-134.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

PROFESSIONAL PUNCHDOWN TERMINAL

163

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

PROFESSIONAL PUNCHDOWN TERMINAL (PPT)

Our Patchbays Now Feature the New Professional

Punchdown Terminal (PPT) Our Patchbays Have Just

Rounded A New Corner

Actually, the corners we rounded belong to our patchbays’

revolutionary, new Professional Punchdown Terminal (PPT),

making it perfectly compatible with the industry standard. We

realized that achieving a new industry standard meant we

couldn’t cut any corners to get there.

The PPT design incorporates a split-barrel design and a more

rugged, thicker housing to minimize the impact of repeated

punchdowns. The split-barrel design eliminates the problems

associated with the old “V-shaped” terminal designs. The PPT

design distributes pressure evenly across both sides of the

terminated wire, causing improved wire retention plus more

reliable connections. The serrated teeth in the plastic housing

firmly grip the wires, which also greatly improves wire

retention. With the PPT, multiple wires can be terminated to a

single contact, and a wide range of wire gauges can be used.

Look for Switchcraft’s PPT in our MTP and TTP Series of

audio patchbays, and in our new Backpanel Series.

All Switchcraft audio patchbays incorporate heavy gauge

materials and our high quality nickel-plated, steel framed

jacks. Gold-plated, crossbar contacts come standard!

MATERIALS

Housing: Thermoplastic (UL 94V-0)

Contacts: High strength copper alloy, tin plated

Wire size: Accommodates #22, 24, or 26 AWG,

stranded or solid

Accessories

Part Number

Description

K459

PPT replacement kit consists of

15 of each color* (IDC/IDC)

K460

PPT replacement kit consists of

15 of each color (IDC/wirewrap)

PT1LA

PT2B

PPT impact punchdown tool

Replacement bit for PT1LA tool

*Colors consist of red, black, white, yellow, blue, and orange.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

164 ^{FRONT ACCESS MTPFA/TTPFA SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

FRONT ACCESS MTPFA/TTPFA SERIES

TTPFA96K1NS

The Front Access Series offers the end user the ease of

re-terminating patchpoints from the front of the rack as

opposed to the back. A slide out tray allows the user to slide

out the punchdown terminals, and reconfigure the unit. An

easy release mechanism on either side of the unit allows it to

be pushed back into place and easy to grip locking nuts tighten

the unit in place.

SPECIFICATIONS

MATERIALS (JACKS)

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with welded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

PANEL

FEATURES AND BENEFITS

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Thermoplastic 94V-0

• Easy slide-out tray slides forward for

easy re-termination from the front of the rack

• Available with either 48 MT style or 96 TT style

jacks in a 1RU space

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improves reliability

• Extra wide designation strips for easy channel

identification

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: -20°C to +65°C

ELECTRICAL

Jack Contact Resistance: 30 milliohms

• Rugged, attractive black epoxy-finished

steel chassis

• Configurations available include normals

strapped and normals brought out

initial maximum; 50 milliohms after life

Jack Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500V at 60 Hz AC

Working Voltage: 100 milliamps or less; maximum 56.5 VDC

Ordering Information

Part

Type of No. of

Number

Jack Jacks Description

TTPFA96K1NS TT

TTPFA96K1NO TT

MTPFA48K1NS MT

MTPFA48K1NO MT

96 1.75" High, normals strapped

96 1.75" High, normals brought out

48 1.75" High, normals strapped

48 1.75" High, normals brought out

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{FRONT ACCESS MTPFA/TTPFA SERIES}165

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

FRONT ACCESS MTPFA/TTPFA SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

166

MTP48K WIRED AUDIO SERIES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MTP48K WIRED AUDIO SERIES

The MTP Series were developed with the AES/EBU digital

standard in mind. All versions are made with 110 Ohm cabling

inside as a standard. Available in a wide variety of configurations.

MTP48K3NO

FEATURES AND BENEFITS

• Unit features 48 MT style jacks in either

1RU (1.75"H) or 2RU (3.5"H) spaces

• All versions utilize AES/EBU wiring for

complete digital compatibility

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improve reliability

• Rugged, attractive black epoxy-finished

steel chassis

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working Voltage: 140 VDC maximum

Current Rating: 100 milliamps

• Extra wide designation strips for easy

channel identification

• 1RU version configurations include normals

strapped and normals brought out

• 2RU version configurations include normals

strapped, normals brought out, and sleeve

normals brought out

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver

with welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

Ordering Information

Part

Type of No. of

Number

Jack

Jacks Description

MTP48K1NS

MTP48K3NS

MTP48K1NO

MTP48K3NO

MT

48

1.75" High, normals strapped

3.5" High, normals strapped

1.75" High, normals brought out

3.5" High, normals brought out

3.5" High, sleeve normals out

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Thermoplastic polyester

MTP48K3SNO MT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{MTP48K WIRED AUDIO SERIES}167

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MTP48K WIRED AUDIO SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

168 ^{TTP96K WIRED AUDIO SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TTP96K WIRED AUDIO SERIES

TT96K3NS

The TTP96K Series was developed with the AES/EBU

digital standard in mind. As a standard the TTP96K utilizes

110 Ohm cabling inside.

FEATURES AND BENEFITS

MECHANICAL

• Unit features 96 TT style jacks in 2RU

(3.5"H) space

• Utilizes AES/EBU wiring for complete

digital compatibility

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

• Attractive, corrosion resistant nickel-plated,

steel frame jacks

• Gold-plated switching contacts reduce

contact resistance, improve reliability

• Rugged, attractive black epoxy-finished

steel chassis

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working Voltage: 140 VDC maximum

Current Rating: 100 milliamps

• Extra wide designation strips for easy

channel identification

SPECIFICATIONS

MATERIALS

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with

welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Thermoplastic polyester

Ordering Information

Part

Number

Type of No. of

Jack Jacks

Description

TTP96K3NS

TT

96

3.5" High, normals strapped

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

TTP96K WIRED AUDIO SERIES

169

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TTP96K WIRED AUDIO SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

170 ^{MTPH/TTPH HARNESS AUDIO SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MTPH/TTPH HARNESS AUDIO SERIES

The MTPH and TTPH Harness Series utilize

standard front panel assemblies, a 4 foot cable

harness, and our standard back panel assemblies.

Available in a wide variety of configurations, all

are terminated to our PPT’s on the back panel.

Primarily used where the back panels must either

be mounted into a rack, or brought back to the

front for easier access. Custom cable lengths can

also be supplied. Contact the factory for details.

MTPH48K3NO

FEATURES AND BENEFITS

PANEL

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Thermoplastic polyester

• Units feature either 48 MT style jacks or 96 TT style jacks on

the front panels, to a 4 foot harness, out to a backpanel with

PPT’s

• All versions utilize AES/EBU wiring for complete digital compati-

bility

• Attractive, corrosion resistant nickel-plated, steel frame jacks

• Gold-plated switching contacts reduce contact resistance,

improve reliability

• Rugged, attractive black epoxy-finished steel frame chassis

• Extra wide designation strips for easy channel identification

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: O°C to +50°C

SPECIFICATIONS

MATERIALS

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500 VAC at 60 Hz

Working Voltage: 140 VDC maximum

Current Rating: 100 milliamps

JACKS

Frame: Nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver with

welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

MTPH/TTPH HARNESS AUDIO SERIES

171

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MTPH/TTPH HARNESS AUDIO SERIES (continued)

Ordering Information

Part Number

Type of Jack

No. of Jacks

Description

MTPH48K1NS

MT

48

1.75" High front panel, 4' Harness,

3.5" High back panel, normals strapped

1.75" High front panel, 4' Harness,

3.5" High back panel, normals brought out

3.5" High front panel, 4' Harness,

3.5" High back panel, normals strapped

3.5" High front panel, 4' Harness,

3.5" High back panel, normals brought out

3.5" High front panel, 4' Harness,

3.5" High back panel, sleeve normals brought out

1.75" High front panel, 4' Harness,

3.5" High back panel, normals strapped

1.75" High front panel, 4' Harness,

5.25" High back panel, normals brought out

3.5" High front panel, 4' Harness,

MTPH48K1NO

MTPH48K3NS

MTPH48K3NO

MTPH48K3SNO

TTPH96K1NS

TTPH96K1NO

TTPH96K3NS

TTPH96K3NO

MT

TT

48

96

3.5" High back panel, normals strapped

3.5" High front panel, 4' Harness,

5.25" High back panel, normals brought out

See Page 172 for Mechanical Drawings

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

172

MTPH/TTPH HARNESS AUDIO SERIES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MTPH/TTPH HARNESS AUDIO SERIES (continued)

TTPH96K1 SERIES

FRONT VIEW

TTPH96K3 SERIES

FRONT VIEW

MTPH48K1 SERIES

FRONT VIEW

MTPH48K3 SERIES

FRONT VIEW

TOP ROW

BOTTOM ROW

NORMALS AT JACKS

NORMALS OUT

FULL SLEEVE NORMALS OUT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{MTPH/TTPH HARNESS AUDIO SERIES}173

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MTPH/TTPH HARNESS AUDIO SERIES (continued)

MTPH48K1NS & MTPH48K3NS

REAR VIEW

MTPH48K1NO & MTPHK3NO

REAR VIEW

MTPH48K1SNO & MTPH48K3SNO

REAR VIEW

TTPH96K1NS & TTPH96K3NS SERIES

REAR VIEW

TTPH96K1NO & TTPH96K3NO SERIES

REAR VIEW

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

174 ^{MTPBP/TTPBP BACKPANEL SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MTPBP/TTPBP BACKPANEL SERIES

MTPH48K3BPNS

The Backpanel Series offers the end user the flexibility of configuring

their own patchbay, or to use as a central patchpoint location.

The backpanels utilize the PPT punchdown and come with

a rugged cable tray.

FEATURES AND BENEFITS

• Allows for custom patchbay configurations

or central patching points

• PPTs have IDCs on both sides for easy

installation

MATERIALS

Housing: Thermoplastic (UL 94V-0)

Contacts: High strength copper alloy

Backpanels: Black Epoxy coated C.R.S.

Cable Tray: Black Epoxy coated C.R.S.

• Rugged, attractive black epoxy-finished

steel chassis

• Cable trays allow for mounting and

securing terminated cable

Ordering Information

SPECIFICATIONS

Part

Sets of

Panel thickness: .093"

Number

PPT Terminals

Height

3.5"

7.0"

Description

T, R, S

T, R, S, TN, RN

+, -, S

Mounting hole diameter: .187"

Mounting hole spacing (48 IDCs/row):

.340" (Horizontal) x .275" (Vertical)

Mounting hole spacing (52 IDCs/row):

.320" (Horizontal) x .275" (Vertical)

Wire size: #22, 24, 26 AWG Stranded

or Solid (IDC termination)

MTP48K3BPNS

MTP48K3PBNO

MTP52K3BPNO

MTP24K7

TTP96K3BPNS

TTP96K5BPNS

48

52

24 x 2

96

96 x 2

3.5"

5.25"

T, R, S

T, R, S, TN, RN

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{MTPBP/TTPBP BACKPANEL SERIES}175

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MTPBP/TTPBP BACKPANEL SERIES (continued)

NOT ALL IDC CONNECTORS SHOWN

FIGURE A

(MTP48K3BPNN SHOWN)

NOT ALL IDC CONNECTORS SHOWN

FIGURE B

(TTP96K5BPNO SHOWN)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

176 ^{EZ NORM PATCHBAY SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

EZ NORM PATCHBAY SERIES

Center Strip Removes For

Normalling Access

Easily Normal The

Jacks By Rotating To

“Full”, “Non”, Or “Half”

Positions

The EZ Norm offers a simplified method for setting up and

ELECTRICAL:

changing normals to a Bantam/TT patchbay. Simply remove

the middle designation strip, and rotate the center cam, using

a standard screwdriver. An audible”click” can be heard as

you rotate from full normals to no normals to half normals.

An opaque marking strip is included to conceal the normal

position, if needed.

Jack Spring Contact Resistance: 30 milliohm Maximum

Cam Switch Contact Resistance: 30 milliohm Maximum

Insulation Resistance: 10,000 Megaohms

Dielectric Withstanding Voltage:

500 VAC (rms) at 60 Hz

Insertion Loss: -0.5dB up to 10 MHz

EZ NORM JACK SPECIFICATIONS

MATERIALS:

Housing & Cover: 94V-0 rated thermoplastic

Sleeve Collar: Nickel plated copper alloy

Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver with

welded contacts

Welded Contacts: Gold

Cam Switching Springs: Silver plated copper alloy

Cam Switching Contacts: Silver plated copper alloy

EZ NORM PATCHBAY OPTIONS

• 1RU can be terminated to EDAC or Cannon DL,

solder terminals, or wire-wrap terminals

• 1.5RU can be terminated to EDAC/Cannon DL, solder

terminals, wire-wrap terminals, plus 3 pin connectors,

or our own PPT Professional Punchdown Terminal

• 2RU Same as above

• All units will be offered with or w/o docking connector

• Unwired units will be offered with either cable tie bar

or cable tray

MECHANICAL

Jack Mechanical Life: 30,000 cycles

Cam Contact Mechanical Life: 30,000 cycles

Insertion - Withdrawal Forces: 1 - 4 lbs.

Moisture resistance: MIL-STD 202 Method 106

Thermal shock: MIL-STD 202 Method 107

Salt spray: MIL-STD Method 101 (48 hrs.)

Vibration: MIL-STD 202 Method 213

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{EZ NORM PATCHBAY SERIES}177

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

EZ NORM PATCHBAY SERIES (continued)

Racks

The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU.

Harness Assembly

The EZ Norm is also offered as a

harness assembly, with a standard

harness of 4 ft. Custom lengths are

available, call Switchcraft^®for details.

TT EZN

_

H

10

15

20

_

P

_

D

E90

E56 3PIN CDL

E38 WW FA

IDC

SL

_

T

B

Front Access

The Front Access option offers a

slide-out tray, allowing the end

user to re-terminate the patchbay

from the front of the rack.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

178 ^{TT96 EDAC SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT96 EDAC SERIES

TT96EDACNS

The TT96EDAC Series offers the convenience of EDAC^®connectors on

the back of the panel for easy installation. Available in normals strapped

and normals brought out, both wired to the SAC code of wiring. We also

offer custom wiring configurations. Contact the factory for details.

FEATURES AND BENEFITS

• Attractive, corrosion-resistant, nickel-plated jacks

• Steel frame jacks for superior jack life

• Extra wide labeling strips provide maximum space

and two vertical strips, one at each side

• Rugged, attractive black anodized

aluminum face will not break

EDAC CONNECTOR

Housing: Thermoplastic, UL94V-0

Contacts: Gold plated phosphor bronze

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: -20°C to +65°C

• Two configurations available:

- Normals brought out

- Normalled at jacks

ELECTRICAL

• Gold switching contacts for long-term reliability

• Jacks paired for easy identification of left and

right channels

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance:10,000 megohms

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC

• Connectorized by EDAC^®connectors for ease of

termination by customer

Current Rating: 100 milliamps

SPECIFICATIONS

MATERIALS

JACKS

EDAC Mating Plugs

Part Number

Frame: Nickel-plated steel

Description

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs:

Nickel silver with welded contacts

Assembly Screws: Zinc-plated steel

Welded Contacts: Gold alloy

516-090-000-301

516-090-000-302

516-120-000-101

516-120-000-102

516-290-500

90 Pin male w/screw

90 Pin male w/nut

120 Pin male w/screw

120 Pin male w/nut

Terminal solder-style

Terminal crimp-style

PANEL

516-290-590

Front Channel: Black anodized aluminum

Frame & Cover: C.R.S. black epoxy painted

Designation Strips: Black

polycarbonate 94V-0

Designation Strip Covers: Clear

polycarbonate

Jack Inserts: Polyester

Ordering Information

Part

Type of No. of

Number

TT96EDACNO

TT96EDACNS

Jack

TT

Jacks

96

Description

Normals Brought Out (120 pin EDAC)

Normals Strapped (90 pin EDAC)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{TT96 EDAC SERIES}179

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT96 EDAC SERIES (continued)

Standard Audio Configuration Wiring (S.A.C.)

90 Pin Plug Connector

(Normals at jacks)

Standard Audio Configuration Wiring (S.A.C.)

120 Pin Plug Connector

(Normals brought out)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

180 ^{TT96K PATCHKIT SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TTP96K PATCHKIT SERIES

TTP96K1FN

The TTP96K Patchkit Series offers the end user a rugged cable tray

to support rear cabling. Heavy duty construction takes weight off the

back of the jacks for increased reliability. Available in 1.75" or 3.5"

height versions.

FEATURES AND BENEFITS

PANEL

• Kit features 96 TT jacks in one rack space

(1.75" high) or two rack spaces (3.5" high)

• Jack blocks can be removed from the front

for easy soldering

• Dust tray limits dirt, dust and contamination

of jack terminals

• Wire management straps are adjustable and reusable

• Attractive, corrosion resistant nickel-plated jacks

• Steel frame jack for superior jack life

• Extra wide labeling strips provide maximum space

• Rugged, attractive black anodized aluminum

face will not break or rust

• Three jack configurations available for the exact

switching arrangement you need: full normal,

half normal, and non-normal (open circuit)

• Fanned solder terminals for easier solder

connections

Front Channel: Black anodized aluminum

Frame: C.R.S. black epoxy painted

Designation Strips: Black polycarbonate 94V-0

Designation Strip Covers: Clear polycarbonate

Jack Inserts: Thermoplastic polyester

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Environmental: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC maximum

Current Rating: 100 milliamps

• Gold switching contacts for long-term reliability

in normal-through connections

SPECIFICATIONS

MATERIALS

JACKS

Ordering Information

Part

Number

Type of

Jack

No. of

Jacks

Description

1.75" High, full normals

Frame: Nickel-plated steel

TTP96K1FN

TTP96K1HN

TTP96K1NN

TTP96K3FN

TTP96K3HN

TTP96K3NN

TT

96

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs: Nickel silver

with welded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

1.75" High, half normal

1.75" High, no normals

3.5" High, full normals

3.5" High, half normals

3.5" High, no normals

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{TT96K PATCHKIT SERIES}181

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TTP96K PATCHKIT SERIES (continued)

TTP96K1 SERIES

TTP96K3 SERIES

TOP ROW

BOTTOM ROW

TTP96K1FN

TTP96K3FN

TTP96K1HN

TTP96K3HN

TTP96K1NN

TTP96K3NN

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

182 ^{MT48K/MT52K PATCHKIT SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MT48K/MT52K PATCHKIT SERIES

MT52K1FN

The MT48/52K Patchkit Series offers the end user a rugged

cable tray to support rear cabling. Heavy duty construction

takes weight off the back of the jacks for increased reliability.

Available in 1.75" or 3.5" height versions.

FEATURES AND BENEFITS

MECHANICAL

• Kit features 48 1/4" longframe jacks in one rack

space (1.75" high) or in two rack spaces (3.5" high) or

52 1/4" longframe jacks in one rack space (1.75" high)

• Allows user to add cable and termination panel

• Removable jack panel from the front allows

easy soldering of wire connections

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC maximum

Current Rating: 100 milliamps

• Jacks have gold switching contacts

• Fanned solder terminals for easier soldering

• Offset ground lugs allow easy bussing of

ground with one wire

• Jacks have a nickel-plated frame and

assembly screws

• Wire management straps are reusable and adjustable

Ordering Information

Part

Type of No. of

SPECIFICATIONS

MATERIALS

JACKS

Frame: Stamped nickel-plated steel

Bushing: Nickel-plated brass

Tip, Ring and Shunt Springs:

Nickel silver with welded contacts

Assembly Screws: Nickel-plated steel

Welded Contacts: Gold alloy

Number

Jack Jacks Height Description

MT48K1NS

MT48K1FN

MT48K1HN

MT48K1NN

MT52K1NS

MT52K1FN

MT52K1HN

MT52K1NN

MT48K3FN

MT48K3HN

MT48K3NN

MT52K3FN

MT52K3HN

MT52K3NN

MT

48

52

48

52

1.75"

3.5"

Normals strapped

Full normals

Half normals

No normals

Normals strapped

Full normals

Half normals

No normals

Full normals

Half normals

No normals

Full normals

Half normals

No normals

PANEL

Front Panel: Thermoplastic

Frame: C.R.S. black epoxy paint

Designation Strips: Black

polycarbonate 94V-0

Designation Strip Covers:

Clear polycarbonate

3.5"

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{MT48K/MT52K PATCHKIT SERIES}183

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MT48K/MT52K PATCHKIT SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

184

MT48/MT52 PATCHBAY SERIES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MT48/MT52 PATCHBAY SERIES

MT48FN

The MT48/52 Series patchbays offer a rugged cable tie bar

to support rear cabling. Also available is the normals strapped

configuration which has the shunts or normals tied together, top

to bottom jacks.

Kwik-change® Designation Strip: Extruded aluminum, black

anodized

FEATURES AND BENEFITS

• Units feature either 48 or 52

Marking Strip:

MT Jax®

White plastic, matte finish

Marking Strip Cover:

Clear, extruded plastic

• Steel frame jacks for superior jack life

• Attractive, corrosion resistant nickel-plated jacks

• Gold switching contacts for long-term reliability in normal-

through connections

• Offset ground terminal for ease in making common ground

buss connections

• Fanned solder terminals for

easier solder connections

• Cable tie bar takes the weight

of cables off the jacks

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lb. minimum

Operating: 0˚C to +50˚C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC

maximum

Current Rating: 100 milliamps

• Four jack configurations

available for the exact switching arrangement: full normal,

half normal, non-normal, and normals strapped

SPECIFICATIONS

MATERIALS

JACKS

Frame: Steel, nickel-plated

Bushing: Brass, nickel-plated

Springs: Nickel silver, solder lugs

Ground Terminal: Nickel silver,

solder lugs

Switching Contacts: Welded, gold alloy

Insulation: Phenolic spacers, rigid PVC tubing through stack

Screws: Steel, nickel-plated

Ordering Information

Part

Type of

Jack

MT

No. of

Jacks

48

52

Number

MT48FN

MT48HN

MT48NN

MT48NS

MT52FN

MT52HN

MT52NN

MT52NS

Description

Full normals

Half normals

No normals

Normals strapped

Full normals

Half normals

No normals

MT

PANEL

Jack Panel: Thermoplastic

Cable Support Bracket: 5/16”

diameter black epoxy painted steel rod

Screws (designation strip): Steel, black zinc-plated

Screws (mounting jack): Steel, nickel plated

MT

52

Normals strapped

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

MT48/MT52 PATCHBAY SERIES

185

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MT48/MT52 PATCHBAY SERIES (continued)

MT52 SERIES

MT48 SERIES

YMT332BN

YMT334BN

YMT389N

JACK SCHEMATICS

“N” SUFFIX DENOTES WELDED GOLD CONTACTS

AND NICKEL-PLATED FRAME

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

186 ^{TTP96AS PATCHBAY SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TTP96AS PATCHBAY SERIES

TTP96AS

The TTP96AS Series of patchbays offer a rugged

cable tie bar to support rear cabling.

FEATURES AND BENEFITS

PANEL

• Unit features 96 TT jacks

Frame: Black anodized aluminum

Inserts: Polyester, glass filled, 94V-0

Cable Support Bar: Cold rolled steel, nickel-plated

Designation Strips: Thermoplastic, 94V-0

Designation Strip Covers:

• Attractive, corrosion resistant nickel-plated jacks

• Steel frame jack for superior jack life

• Extra wide labeling strips provide maximum space

• Rugged cable tie bar takes the weight of

cables off the jacks

Clear thermoplastic, SE-1

• Rugged, attractive black anodized aluminum

face will not break

Marking Strip: Rigid vinylite

Jack Mounting Screws: Steel, plated

Screws: Steel, black plated

• Three jack configurations available for the exact

switching arrangement you need: full normal,

half normal, and open circuit panel

• Fanned solder terminals for easier solder

connections

• Offset ground terminal for ease in making

common ground buss connections

• Gold switching contacts for long-term reliability

in normal-through connections

MECHANICAL

Life: 30,000 cycles

Insertion Force: 7 lbs. maximum

Withdrawal Force: 1 lbs. minimum

Environmental: 0°C to +50°C

ELECTRICAL

Contact Resistance: 30 milliohms maximum initial

Insulation Resistance: 10,000 megohms maximum

Dielectric Withstanding Voltage: 500VAC at 60 Hz

Working Voltage: 140VDC maximum

SPECIFICATIONS

MATERIALS

JACKS

Current Rating: 100 milliamps

Frame: Steel, nickel-plated

Bushing: Nickel-plated copper alloy

Springs: Copper alloy solder lugs

Ground Terminal: Steel, tin electrodeposited

Switching Contacts: Welded, gold alloy inlay

over palladium base

Insulation: Rigid plastic spacers, rigid PVC

tubing through stack

Screws: Steel, plated

Ordering Information

Part

Number

TTP96ASFN

TTP96ASHN

TTP96ASNN

Type of

Jack

TT

No. of

Jacks

96

Description

Full normals

Half normals

No normals

TT

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{TTP96AS PATCHBAY SERIES}187

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TTP96AS PATCHBAY SERIES (continued)

TOP ROW

BOTTOM

ROW

BOTTOM

ROW

BOTTOM

ROW

TTP96ASHN

TTP96ASNN

TTP96ASFN

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

188 ^Q-G^®^®^{PATCHBAY SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®PATCHBAY SERIES

QGPK332MFB

The QG Patchbay features a 19" rack unit loaded with E Series QG

connectors. These XLR’s have the same panel cut-out, male or female,

silver-plated pins or contacts, and a black finish. All connectors have

solder cup terminals for easy soldering and the inserts are removable

from the back, allowing for easy changes. The one rack unit height

version comes with 16 male, or 16 female, or 8 male and 8 female

connectors. The two rack unit version comes with 16 male and

16 female connectors.We also offer the unit without connectors, but with

the panel cut-outs already punched out. All versions have

a rugged cable tie bar, which takes the weight of the cabling away

from the solder connections.

FEATURES AND BENEFITS

Latch Release: Steel, nickel-plated

Insert Locking Cam: Die-cast zinc

• Available in 1RU or 2RU versions

• Available with or without the connectors

• E Series connectors are silver-plated,

3 pins/contacts with black finish

• Cable tie bar takes the weight of the cables off

the solder terminations

FRAME

Aluminum, black anodized

CABLE TIE BAR

Steel, black epoxy

• Rugged aluminum channel

increases durability

• Silk-screen designation area makes

it easy to re-label channels

SPECIFICATIONS

MATERIALS

CONNECTORS

Housing: Die-cast, black velvet finish

Inserts: Glass-filled thermoplastic

Pin/Contacts: Copper alloy, silver-plated

Ordering Information

Part Number

QGPK116FB

QGPK116MB

QGPK18M8FB

QGPK332MFB

QGPK1B

Height

1.75"

3.5"

Description

16 female

16 male

8 male, 8 female

16 female( top), 16 male (bottom)

Blank panel

1.75"

3.5"

QGPK3B

Blank panel

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

Q-G^®^®PATCHBAY SERIES

189

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

Q-G^®PATCHBAY SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

190

HPC PATCHBAY SERIES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

HPC PATCHBAY SERIES

The HPC Patchbay features a 19” rack unit loaded with HPC

Series connectors. Available with either 0.250” Faston terminals

or 0.187” Faston terminals. One rack unit height versions come

with 12 HPC connectors, two rack unit height versions come

with 24 HPC connectors. All versions have a rugged cable

tie bar, which takes the weight of the cabling away from the

connections.

FEATURES AND BENEFITS

• Available in 1RU or 2RU versions

• Available with or without connectors

• HPC Series connectors are compatible with Neutrik

Speakon^®connectors

• Cable tie bar takes weight of the cables off the terminations

• Rugged aluminum channel

• Silk-screen designation area makes it easy to re-label chan-

nels

HP CONNECTOR SPECIFICATIONS

See page 38 for details

MATERIALS

Housing: Thermoplastic UL 94V-O rated

Contacts: Silver-plated over copper alloy

FRAME

Aluminum, black anodized

CABLE TIE BAR

Steel, black epoxy

Part

Number

Height

Description

HPCPK112F

HPCPK112F1

HPCPK1B

HPCPK324F

HPCPK324F1

HPCPK3B

1.75"

3.50"

12 connectors, 0.250" Fastons

12 connectors, 0.187" Fastons

Blank panel

24 connectors, 0.250" Fastons

24 connectors, 0.187" Fastons

Blank panel

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Neutrik

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{DATA PATCHBAY SERIES}191

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

RS 422 DATA PATCHBAY SERIES

FEATURES AND BENEFITS

• Unit Features either 8,16, 24, or 32 TT style

jacks on the front Panels, to a 9 pin D-Sub

or PPT back Plane.

• All version utilize low capacitance internal wiring

for maximum performance of transferring data

• All standard units are available 1 or 2 rack

units high (1.5 RU available by request)

• Rugged, attractive black epoxyfinished steel

frame chassis

Our standard RS data jackfield series offer a

multiple combination of ports, rack heights, and

back panel terminations which will easily fit into

any television broadcast or video production

where custom data patching is required. Custom

ports and rack height combinations can be

supplied. Contact the factory for details.

RS422 Ordering Information

Part

Number*

No. of

Jacks

Front Panel Back

Layout

Rack

Height

Plane

RS422H48N081 2 x 8

Horizontal

Vertical

Horizontal

Vertical

Horizontal

Vertical

9 Pin D-Sub

PPT Punchdown

1

2

1

2

1

2

1

2

RS422V4N081

RS422H4N161

RS422H4N162

RS422V4N161

RS422V4N162

RS422H4N242

RS422V4N242

RS422V4N322

2 x 8

2 x 16

2 x 24

2 x 32

SPECIFICATIONS

ELECTRICAL

Internal Wiring:

24 AWG Solid TC, foils shield

Nom Capacitance: 11.5 pF/ft between conductors

21.3 pF/ft between one conductor and conductor

connected to the shield

Vertical

RS422PH4N081 2 x 8

RS422PV4N081 2 x 8

RS422PH4N161 2 x 16

RS422PH4N162 2 x 16

RS422PV4N161 2 x 16

RS422PV4N162 2 x 16

RS422PH4N242 2 x 24

RS422PV4N242 2 x 24

RS422PV4N322 2 x 32

Horizontal

Vertical

Horizontal

Vertical

Horizontal

Vertical

Nom. Impedance: 110 Ohms

Vertical

*Add "N" for non-normalled version

See Page 267 for Patchcord Information

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

192 ^{DATA PATCHBAY SERIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

RS 422 DATA PATCHBAY SERIES

RS422V4N322

32 Vertical Paired Jacks

Front and Back Views

RS422H4N242

24 Horizontal Paired Jacks

Front and Back Views

Ordering Information

Part

Number

No. of

Jacks

Front Panel

Layout

Back

Plane

Rack

Height

RS422H4N081

RS422V4N081

RS422H4N162

RS422V4N162

RS422H4N242

RS422V4N242

RS422V4N322

RS422PH4N081

RS422PV4N081

RS422PH4N162

RS422PV4N162

RS422PH4N242

RS422PV4N242

RS422PV4N322

2 x 8

Horizontal

Vertical

9 Pin D-Sub

1

9 Pin D-Sub

2 x 16

2 x 24

2 x 32

2 x 8

Horizontal

Vertical

9 Pin D-Sub

1, 2

2

9 Pin D-Sub

Horizontal

Vertical

9 Pin D-Sub

2

Vertical

9 Pin D-Sub

2

Horizontal

Vertical

PPT Punchdown

1

2 x 8

1

2 x 16

2 x 24

2 x 32

Horizontal

Vertical

1, 2

2

Horizontal

Vertical

2

Vertical

2

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{VPP VIDEO PATCHBAY SERIES}193

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

VPP VIDEO PATCHBAY SERIES

VPP24K3HD75T

VJHD*75TX

The VPP Series video patchbays offer a wide variety of options for video patching.

The HD Series meets SMPTE 292M specifications for high definition video signaling,

covering a bandwidth range from DC to 2.4GHz. The SD Series is perfect for serial

digital, with a bandwidth from DC to 1.75GHZ. Both come in either terminated or

non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights.

FEATURES AND BENEFITS

ENVIRONMENTAL

• HD Series meets SMPTE 292M Specifications

• SD Series has a bandwidth from DC to 1.75GHz

• Black thermoplastic modules insulate

jacks from chassis

Operating Temperature: – 40ºC to 65ºC

Storage Temperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity:

• Jacks feature rugged heavy duty housings

Per MIL-STD-202, Method 106

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Ordering Information

Part

Number

Type of No. of

Jack Jacks Height Description

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

VPP24K1HD*75T HD

VPP24K1HD*NT HD

VPP24K1SD*75T SD

VPP24K1SD*NT SD

VPP26K1HD*75T HD

VPP26K1HD*NT HD

VPP26K1SD*75T SD

VPP26K1SD*NT SD

VPP24K3HD*75T HD

VPP24K3HD*NT HD

VPP24K3SD*75T SD

VPP24K3SD*NT SD

VPP26K3HD*75T HD

VPP26K3HD*NT HD

VPP26K3SD*75T SD

VPP26K3SD*NT SD

24

26

24

26

1.75"

3.5"

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

Terminated

Non-term

MECHANICAL

Mechanical Shock: Per MIL-STD-202, Method 213,

Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts:

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

3.5"

*Add “N” for non-normalled version

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

VPP VIDEO PATCHBAY SERIES

194

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

VPP VIDEO PATCHBAY SERIES (continued)

NON-NORMALLED

TERMINATED

NORMALLED

TERMINATED

NORMALLED

NON-TERMINATED

NON-NORMALLED

NON-TERMINATED

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

195

VPP VIDEO PATCHBAY SERIES

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

VPP VIDEO PATCHBAY SERIES (continued)

Ordering–Individual Jacks

Part Number

VJHD*75TX

VJHD*NTX

VJSD*75TX

VJSD*NTX

Type

HD

SD

Description

Terminated

Non-terminated

Terminated

SMITH CHART

(TYPICAL)

SD

Non-terminated

*Add “N” for non-normalled version

FREQUENCY (MHz)

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

MVP MIDSIZE VIDEO PATCHBAY SERIES

196

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MVP MIDSIZE VIDEO PATCHBAY SERIES

MVP32K3*75T

MVJ*75T

The MVP Series video patchbays offer outstanding

performance and high density. Patchbays consist of

32 jacks in either 1RU or 2RU heights, jacks come either

terminated or non-terminated. These jacks are rated

from DC to 3 GHz, and are rated at 30,000 lifecycles.

FEATURES AND BENEFITS

MATERIAL

Housing: Zinc alloy, nickel plated

• Midsize video jacks rated from DC to 3 GHz

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

Grounding Contacts: Copper alloy, gold plated

BNC Insulators: Teflon

• 32 midsize jacks mounted either 1RU, 1.5RU or 2RU panel

• Available in terminated or non-terminated configurations

SPECIFICATIONS

MATERIAL

Frame: Aluminum, black anodized

Actuators: Thermoplastic, UL94V-0 rated

Designation Strips: Vinylite, white

ENVIRONMENTAL

Designation Strip Covers: Lexan, transparent

Jack Inserts: Thermoplastic, UL 94V-0 rated

Operating Temperature: – 40ºC to 65ºC

Storage Temperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity: Per MIL-STD-202, Method 106

MIDSIZE VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 3.0 GHz

Characteristic Impedance: 75 ohms

Return Loss: See Typical Return Loss Chart

Insertion Loss: See Typical Insertion Loss Chart

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Ordering Information

Part

Type

Number

of Jack Height

Description

Terminated

Non-terminated

Terminated

Center Conductor: Accepts .048 pin diameter

MVP32K1*75T

MVP32K1*NT

MVP32K3*75T

MVP32K3*NT

Midsize

1.75"

3.5"

MECHANICAL

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

3.5"

Non-terminated

* Add “N” for non-normalled version

Note: For 1.5RU (2.62" height), use K2

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

197

MVP MIDSIZE VIDEO PATCHBAY SERIES

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

MVP MIDSIZE VIDEO PATCHBAY SERIES

198

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MVP MIDSIZE VIDEO PATCHBAY SERIES (continued)

SMITH CHART (TYPICAL)

Ordering Information

Part

Number

MVJ*75TX

MVJ*NTX

Description

Terminated

Non-terminated

*Add “N” for non-normalled version

RETURN LOSS (TYPICAL)

I

N

S

E

R

T

I

R

E

T

U

R

N

0

G

O

D

-1

-2

-3

-4

-5

-10

-15

-20

-25

-30

-35

O

N

L

O

S

(dB)

G

O

D

L

O

S

(dB)

0

600

1200

1800

2400

3000

0

600

1200

1800

2400

3000

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

199

VAP VIDEO/AUDIO PATCHBAY SERIES

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

VAP VIDEO/AUDIO PATCHBAY SERIES

VJHD*75TX

VAPK3HD*75T

The VAP Series combines audio and video in one convenient

patchbay. Standard versions consist of 13 video jacks and 26

long-frame audio jacks into one unit. Options include HD Series

video jacks which are rated from DC to 2.4GHz or SD Series

rated from DC to 1.5GHz. Both come in either terminated or

non-terminated jacks. The MT Style audio jacks all have

nickel-plated steel frames and gold-plated switching contacts.

Flared terminals make soldering easier. All audio jacks are

T,R,S, TN, and RN. Individual modules are useful for custom

configurations.

Grounding Contacts:

FEATURES AND BENEFITS

HD Series - Copper alloy, gold plated

SD Series - Copper alloy, nickel plated

Insulators: Thermoplastic, UL 94V-0 rated

• Combines 13 video jacks and 26 long-frame

audio jacks into one patchbay

• Available with either HD Series or SD Series

video jacks

• All audio jacks are nickel-plated with steel frames

and gold-plated switching contacts

• Audio modules consist of 4 YMT334BN jacks,

video modules consist of 2 dual video jacks

ENVIRONMENTAL

Operating Temperature: – 40ºC to 65ºC

Storage Temperature: – 55ºC to 85ºC

Thermal Shock: Per MIL-STD-202, Method 107

Moisture and Humidity: Per MIL-STD-202, Method 106

VIDEO JACK SPECIFICATIONS

ELECTRICAL

Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD)

Characteristic Impedance: 75 ohms

Return Loss: Better than –15 dB

Insertion Loss: Better than –.5 dB

Contact Resistance: Less than 20 milliohms

Termination Resistance: 75 W, ±1%

Center Conductor: Accepts .090 pin diameter

Ordering Information

Part

Type of

Number

Jack Height Description

VAPK1HD*75T HD

1.75"

3.5"

3.5”

Terminated

Non-terminated

Terminated

Non-terminated

Terminated

Non-terminated

Terminated

VAPK1HD*NT

VAPK1SD*75T

VAPK1SD*NT

HD

SD

MECHANICAL

VAPK3HD*75T HD

Mechanical Shock: Per MIL-STD-202,

Method 213, Test condition I

Vibration: Per MIL-STD-202, Method 201

Insertion Force: 12 lbs. maximum

Withdrawal Force: 3 lbs. minimum

Life Cycle: 30,000

VAPK3HD*NT

VAPK3SD*75T

VAPK3SD*NT

Modules

HD

SD

Non-terminated

VMAFN

MT

HD

SD

4- YMT334BN jacks

VMVHD*75T

VMVHD*NT

VMVSD*75T

VMVSD*NT

2- HD terminated jacks

2- HD non-terminated jacks

2- SD terminated jacks

2-SD non-terminated jacks

MATERIAL

Housing: Zinc alloy, nickel plated

Center Contacts: Copper alloy, gold plated

Switching Springs: Copper alloy, gold plated

*Add “N” for non-normalled version

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

200

VAP VIDEO/AUDIO PATCHBAY SERIES

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

VAP VIDEO/AUDIO PATCHBAY SERIES (continued)

VAPK3HD*75T

VAPK1HD*75T

VJ SERIES

MT SERIES

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{MBPK VIDEO/AUDIO PATCHBAY SERIES}201

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MBPK VIDEO/AUDIO PATCHBAY SERIES

MBPK175T

The MBPK Series combines audio and video in one

convenient patchbay. The patchbay consists of 16 midsize

video jacks and 48 TT bantam jacks. Options include 75 Ohm

terminated or non-terminated video jacks. All TT bantam jacks

have T, R, S, TN and RN solder terminals. Audio jacks have

nickel-plated steel frames, gold-plated crossbar switching

contacts and flared terminals for easier soldering.

VIDEO JACK SPECIFICATIONS

See page 196 for details

AUDIO JACK SPECIFICATIONS

See page 164 for details

FEATURES AND BENEFITS

Combines 16 midsize video jacks and

48 TT bantam audio jacks

MATERIALS

FRAME

Aluminum, black anodized

Video jacks are rated from DC to 3.0 GHZ

All audio jacks are nickel-plated with steel frames and gold-

plated crossbar switching contacts

For non-terminated version, use part no. MBPK1NT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

202

"

LONG FRAME 1/4 TELEPHONE JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") TELEPHONE JACK PANELS

STANDARD SINGLE ROW JACK PANELS

SERIES 1200 AND 1400

SERIES 1200

Panels accomodate 24 T-Jax^®jacks in standard 1.75 inch x

19 inch racks. Jack openings are on alternate .625 inch and

.750 inch spacing; twin plugs cannot be cross-connected

between adjacent jack pairs. Includes designation strips

(marking strips and transparent plastic covers).

Series 1200

*Shown with optional

SERIES 1300

jacks. See next page for

Same as Series 1200, except MT-Jax^®are used in panel

specific part numbers.

assemblies.

SERIES 1400

Mounts 26 T-Jax^®. Openings are on continuous .625 inch

centers. Twin plug can be used on any two adjacent jacks.

Single designation strip (marking strip, and plastic cover).

WEco equivalent is 230B.

SERIES 1400300

Same as Series 1400, except designation strip is

Kwik-Change^®type which is easier to install and remove and

provides larger vertical designation marking area. Strip holder

is recessed into top of panel for additional panel strength.

1400301 has single height Kwik-Change^®designation strip.

1400315 has a single height Kwik- Change^®designation strip

along bottom of panel and double height strips above jacks.

Top designation strip has .188 inch overhang above 1.75 inch

panel height, to help seal small opening between adjacent

panels. CAUTION: Because of this overhang, 1400315

cannot be mounted one above another in a rack.

Series 1400

*Shown with optional

jacks. See next page for

specific part numbers.

SERIES 1500

Same as Series 1400 except MT-Jax^®are used in panel

assemblies.

1400301

*Shown with optional

jacks. See next page for

specific part numbers.

SPECIFICATIONS

Jack Panel: General purpose black phenolic resin

Frame (except 1400300): Plated, steel

End Bracket and Side Strip (1400300 only): Cold rolled

plated steel

Designation Strip (except 1400300): Clear plastic.

"Kwik-Change" Designation Strip (1400300): Extruded

aluminum, black anodized and black thermoplastic

UL 94V-0.

Marking Strip: White plastic, matte finish.

Marking Strip Cover: Clear extruded plastic.

Screws: #6-32 x .25 inch phillips RHMS (for mounting jacks).

1400315

*Shown with optional

jacks. See next page for

specific part numbers.

ORDERING

Part number table lists blank panels and popular jack panel

assemblies. If you wish to mount components on basic panels,

order jacks, lamp jacks, and switches separately. (See

appropriate section in this catalog.) For other panel assemblies,

provide complete details with your inquiry or order. Switchcraft

can build special assemblies to your requirements in small

or large quantities. See wire wrapping data. Series 1200

and 1400 are available with holes pre-drilled for vertical

designation strips (Series DS320). Add prefix "D" to part

numbers for pre-drilled panels: D1200, D1400301, etc.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

"

^{LONG FRAME 1/4 TELEPHONE JACK PANELS}203

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") TELEPHONE JACK PANELS (continued)

Part Numbers

Assembly with Jacks

With Solder Lugs

Part Numbers

Description

Assembly with Jacks

With Wire-Wrapping

Terminals

Number

of Jacks

Type of

Jacks Installed

Panel Only

Straight

Offset

-

1200

-

None

24

-

1332A

◊X1332A

MT332A , XMT332A or WMT332A MT-Jax^®

MT332B or XMT332B MT-Jax^®

◊W1332A

-

◊1332B

◊X1332B

24

-

◊1334B

◊X1334B

24

MT334B,XMT334B or WMT334B MT-Jax^®

◊W1334B

-

1400

-

None

26

-

1400301

-

◊1400315

-

1532A

◊1532A301

◊1532B

◊1532B301

◊1534B

-

MT332A or XMT332A MT-Jax^®

MT332A or WMT332A MT-Jax^®

MT332B MT-Jax^®

MT332B, XMT332B or WMT332B MT-Jax^®

MT334B, XMT334B or WMT334B MT-Jax^®

WMT334B MT-Jax^®

-

X1532A

◊W1532A301

-

26

-

26

◊W1532B301

◊W1534B

◊W1534B301

-

◊X1532B301

◊X1534B

-

26

-

◊X1542B315

26

XMT342B MT-Jax^®

◊ Special order only; contact factory for price and delivery.

1. Prefix “X” denotes offset lugs for buss wiring.

Jack Mounting Screws: #6-32, P10725, can be ordered separately.

Contact Switchcraft.

Legend Cards (Series 1200, 1300) - A1029

Legend Windows (Series 1200, 1300) - A1030

Series 1200

Series 1400

Series 1400-301

Series 1400-315

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

"

204

LONG FRAME 1/4 TWIN ROW JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") TWIN ROW JACK PANELS

Series 2400

Series 2600301

*Shown with optional jacks,

See next page for specific

part numbers.

*Shown with optional jacks,

See next page for specific

part numbers.

Series 2600

*Shown with optional jacks,

See next page for specific

part numbers.

strength. 2600301 has single height designation strips (one

above and below each row of jacks).

STANDARD TWIN ROW JACK PANELS

SERIES 2400, 2600, 2600300, 2700300 – PHENOLIC

2600310

Twin row jack panels offer greater jack density - up to 52 jacks

per panel. All panels fit standard 19" wide racks. Blank panels

or standard assemblies can be ordered from Switchcraft.

Series 2600 panels are direct equivalent to WEco #230A.

Has a double height strip above top row and a steel reinforcing

strip below bottom row. Top strip has .188" overhang above

1.75" panel height, helping seal the small opening between

adjacent panels. Note: overhang prevents mounting panel one

above another in a rack.

SERIES 2400

Twin row panel accommodates 48 T-Jax^®. Openings are on

alternate .625" and .75" centers. Panel is 2.125" high and fits

standard 19" racks. Twin plug cannot be cross-connected

between jacks in adjacent quads, but may be connected either

horizontally or vertically in the same quad. Single designation

strip.

SERIES 2700

Same as Series 2600 except MT-Jax^®are used in panel

assemblies. The series is available with cable tie bar.

ORDERING

1. Order basic panels and popular assemblies by part number

from table.

SERIES 2500

Same as Series 2400 except MT-Jax^®are used.

2. For special panels provide complete details with your inquiry

or order.

3. Series 2600 is available with hole pre-drilled for vertical

designation strips, Series DS320. Add prefix “D” to part

number (D2600301, etc.).

SERIES 2600

Twin row panel accommodates 52 T-Jax^®in standard 1.75" x

19" racks. Jack openings are on continuous centers. Twin plug

can be connected to any two adjacent jacks, either horizontally

or vertically. Two designation strips. WEco equivalent is #230A.

4. Jack Mounting Screws: #6-32, P10725, can be ordered

separately. Contact Switchcraft.

SERIES 2600300

Same as Series 2600, except designation strips are

Kwik-Change^®type, providing larger vertical marking area. Top

strip holder is recessed into top of panel to provide additional

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

"

LONG FRAME 1/4 TWIN ROW JACK PANELS – PART NUMBERS

205

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") TWIN ROW JACK PANELS (continued)

Part Numbers

Description

Assembly with Jacks Having

Solder Lugs

Assembly with Jacks

Having Wire-

Wrapping Terminals

Number

of Jacks

Panel Only

Straight

Offset¹

Type of Jack Installed

-

None

48

2400

-

◊2432A

◊2432B

◊2434B

◊2532A

◊2532B

◊2533

◊2533B

◊2534B

◊2542B

◊2544B

◊2588

◊2589

-

T332A

T332B

-

◊X2432A

-

48

-

◊X2432B

-

48

T334B or XMT334B T-Jax^®

MT332A, XMT332A or WMT332A MT-Jax^®

MT332B or XMT332B MT-Jax^®

MT333 MT-Jax^®

MT333B or WMT333B MT-Jax^®

MT334B or XMT334B MT-Jax^®

MT342B MT-Jax^®

MT344B, MT-Jax^®

MT388, Twin MT-Jax^®

MT389 Twin MT-Jax^®

-

◊X2434B

◊W2532A

48

-

◊X2532A

-

48

-

◊X2532B

-

48

-

◊W2533B

48

-

48

-

X2534B

-

48

-

48

-

24

-

24

-

None

52

2600

-

(WEco equivalent #230A)

2600301

-

2600310

-

MT332A or XMT332A MT-Jax^®

MT332A, XMT332A or WMT332A MT-Jax^®

MT332B, XMT332B or WMT332B MT-Jax^®

MT333B, MT-Jax^®

MT334B or XMT334B MT-Jax^®

MT334B, XMT334B or WMT334B MT-Jax^®

MT389 or WMT389 Twin MT-Jax^®

XT332A

-

◊2732A

◊2732A301

◊2732B

◊2732B301

◊2733B

◊2734B

◊2734B301

◊2789

-

◊X2732A

◊X2732A301

◊X2732B

◊X2732B301

-

◊W2732A301

52

◊W2732B

52

◊W2732B301

52

-

52

-

52

◊X2734B

◊X2734B301

-

◊W2734B301

52

◊W2789

26

-

48

◊X2832A

◊X2932A

48

XMT332A

-

1. Prefix “X” denotes offset lugs for buss wiring.

◊ Special order only; contact factory for price and delivery.

Series 2600300 and 2700301

Series 2400 and 2500

Series 2600 and 2700

Series 2600310 and 2700310

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

"

206 ^{LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS

SERIES JP072S32A

*Shown with optional jacks, See next

page for specific part numbers.

SERIES JP122S34B

*Shown with optional jacks, See next page

for specific part numbers.

SERIES JP032S32B

*Shown with optional jacks, See next page

for specific part numbers.

SERIES JP012000 THROUGH JP122000

SERIES JP052000

Series JP^®Modular Jack Panels feature a modular packaging

concept. Jacks are mounted on inserts then complete

modular insert assemblies are mounted to the panel from the

rear. Mounting and wiring are quick and easy. Individual jacks

or complete inserts can be removed from the panel with

minimum disturbance to wiring and adjacent jacks. JP panels

offer three mounting styles (standard rack mount, flush

mount, and extension mount), staggered or continuous-center

panel openings, two panel lengths (19" and 23"), WEco

equivalents, Kwik-Change^®designation strips, precision

manufactured modular parts, rugged black anodized

aluminum frames and quick and easy module or jack

removal/installation.

Same as JP012000, except designed for flush mounting or standoff

mounting. Switchcraft Bracket Kit K107; Contact Switchcraft.

SERIES JP062000

Same as JP052000, except 23" wide (includes 14 inserts

which accommodate 56 MT-Jax^®).

SERIES JP072000

Same as JP012000, except mounts 52 MT-Jax^®and includes

13 black module inserts. Modular equivalent of WEco #230A.

SERIES JP082000

Same as JP072000, except 23" wide (includes 16 inserts which

accommodate 64 MT-Jax^®). Modular equivalent to WEco #231A.

SERIES JP092000

Each module insert has four holes which mount four MT-Jax^®

or two Twin-Jax^®. Each modular jack panel is supplied with

two Kwik-Change^®designation strips. Mounting strips are

integral with panel, and marking strips and clear covers snap

into place quickly and easily.

Same as JP072000, except with 5.375" extension brackets

which permit access to rear of jacks from front of panel.

Brackets are supplied mounted to panel.

SERIES JP102000

Same as JP092000, except 23" wide (includes 16 inserts

which accommodate 64 MT-Jax^®).

SERIES JP012000

Standard 1.75" x 19" size for console, rack or control panel

mounting. Mounts 48 MT-Jax^®. Openings are on alternate

.625" and .75" centers in each row. A twin plug fits jacks

horizontally or vertically in the same quad, but cross-connecting

between quads is not possible. Includes 12 black module

inserts, insert mounting screws and two Kwik-Change^®

designation strips.

SERIES JP112000

Same as JP072000, except designed for flush mounting or standoff

mounting. Switchcraft Bracket Kit K107; Contact Switchcraft.

SERIES JP122000

Same as JP112000, except 23" wide (includes 16 inserts

which accommodate 64 MT-Jax^®).

SPECIFICATIONS

SERIES JP022000

Same as JP012000, except 23" wide (includes 14 inserts

Panel and Integral Designation Mounting Strips:

Aluminum alloy, extruded. Black anodized per MIL-A-8625

Module Insert: Molded plastic, matte finish. Black standard;

white, red, green, blue or yellow available on special order

Marking Strip: White matte finish plastic

Designation Strip Cover: Extruded clear plastic

Screws: #6-32 x 5/15", PHMS, for jack mounting;

#4-40 x 1/2" phillips PHMS, for module insert mounting

Brackets: 5.375", aluminum alloy black anodized finish

(JP032000, JP042000, JP092000, JP102000)

Screws, Mounting Bracket: #6-32, self-tapping supplied.

which accommodate 56 MT-Jax^®).

SERIES JP032000

Same as JP012000, except with 5.375" extension brackets

which permit access to rear of jacks from front of panel.

Brackets are supplied mounted to panel.

SERIES JP042000

Same as JP032000, except 23" wide (includes 14 inserts

which accommodate 56 MT-Jax^®).

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

"

^{LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS}207

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

ORDERING

Order popular assemblies by part number from table. If you

wish to mount components on the panels, order blank panels

and refer to MODULE INSERTS below. On special order,

various combinations of colored inserts mounted in basic

panels, as well as many different types of complete

assemblies are possible. Provide complete details with your

inquiry or order. Standard mount panels are available with holes

pre-drilled for vertical designation strips, Series DS320. Add

prefix “D” to part number (JPD012000, JPD022000,

JPD072000, JPD082000, etc.).

Part Numbers*

# of

Jacks

Assembly with Jacks

Having Solder Lugs

MT-Jax^®

Installed

Assembly with Jacks

Having Solder Lugs

MT-Jax^®

Installed

Panel Only

Jacks

None¹

52

Panel Only

JP012000

-

◊JP012S32A

◊JP012S32B¹

JP012S34B¹

-

None

48

◊JP072000

-

◊JP072S32A

◊JP072S32B

JP072S34B

-

MT332A

MT332B

MT334B

-

MT332A

MT332B

MT334B

-

52

-

48

-

52

None²

-

48

-

◊JP022000

None

56

◊JP082000

64

MT332A

MT332B

MT334B

-

◊JP022S32A

◊JP022S32B

◊JP022S34B

-

MT332A

MT332B

MT334B

-

◊JP082S32A

◊JP082S32B

◊JP082S34B

-

64

-

56

-

64

-

56

-

None

52

◊JP032000

None

48

◊JP092000

MT332A

MT332B

MT334B

-

◊JP032S32A

◊JP032S32B

◊JP032S34B

-

MT332A

MT332B

MT334B

-

◊JP092S32A

◊JP092S32B

◊JP092S34B

-

52

-

48

-

52

-

48

-

None

64

◊JP042000

None

56

◊JP102000

MT332A

MT332B

MT334B

-

◊JP042S32A

◊JP042S32B

◊JP042S34B

-

MT332A

MT332B

MT334B

-

◊JP102S32A

◊JP102S32B

◊JP102S34B

-

64

-

56

-

64

-

56

-

None

52

JP052000

None

48

◊JP112000

MT332A

MT332B

MT334B

-

◊JP052S32A

◊JP052S32B

◊JP052S34B

-

MT332A

MT332B

MT334B

-

◊JP112S32A

◊JP112S32B

◊JP112S34B

-

52

-

48

-

52

-

48

-

None

64

◊JP062000

None

56

◊JP122000

MT332A

MT332B

MT334B

-

◊JP062S32A

◊JP062S32B

◊JP062S34B

MT332A

MT332B

MT334B

-

◊JP122S32A

◊JP122S32B

◊JP122S34B

64

56

64

56

1. Add a “1” to the part number to specify a cable tie bar.

Mounting Screws: #6-32, P10725 for jack mounting and #4-40,

P2435 for insert mounting, can be ordered separately.

* Panels with jacks having wire-wrapping terminals are approximately 10%

higher in price. Contact Switchcraft.

1. Non-modularized equivalent is WEco #230A.

2. Non-modularized equivalent is WEco #231A.

◊ Special order only; contact Switchcraft.

MODULE INSERTS

JP9942

JP9922

JP9902

Part Number

JP9942

Description

Black module insert with four jack openings

(less jacks). Includes two, #4-40 machine

screws for mounting.

JP9922

JP9902

Black module insert with two jack openings

(less jacks). Includes two, #4-40 machine

screws for mounting.

Standard color is black, matte finish plastic. Contact

Switchcraft. Inserts are ideal for mounting directly in control

panels and chassis where convenient jack connections are

required. Applications include test outlets, remote equipment

connections and headsets such as those used in telephone

and telecommunications equipment.

Black module insert without holes. Includes

two, #4-40 machine screws for mounting.

Used where no jacks are needed.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

"

( )

208

LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

Series JP01-2000, JP02-2000, JP07-2000, JP08-2000

Series JP03-2000, JP04-2000, JP09-2000, JP010-2000

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

"

^{LONG FRAME 1/4 MODULAR TWIN ROW JACK PANELS}209

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued)

Series JP052000, JP062000, JP112000, JP122000

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

"

( )

210

LONG FRAME 1/4 MODULAR 3 ROW JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

LONG FRAME (1/4") MODULAR 3 ROW JACK PANELS

Four series of cross-connect jack panels are available in 19"

and 23" widths. Individual modules are easily dismounted

from the front. On special order, panels can be supplied with

a variety of standard telephone jacks.

SERIES JP312000 AND JPD312000

2.655" x 19" size for console, rack or control panel mounting.

Mounts 24 twin jacks and 24 single jacks. Openings are on

.625" centers in each row. A twin plug fits jacks horizontally

or vertically in same quad. Bottom row has 24 single jacks.

Two Kwik^®-Change designation strips are supplied. Series

SPECIFICATIONS

JPD31 has pre-drilled and countersunk holes for mounting

vertical designation strips. See “ORDERING”.

Panel and Designation Strips: Aluminum alloy,

extruded. Black anodized per MIL-A-8625.

SERIES JP322000 AND JPD322000

Same as JP312000 and JPD312000, except 23" wide

(includes 14 inserts which accommodate 28 twin jacks and

28 single jacks).

Module Insert: Molded plastic, matte finish. Black standard;

white, red, green, blue or yellow available on special order.

Marking Strip: White matte finish plastic.

Designation Strip Cover: Extruded clear plastic.

Screws: #6-32 x 5/16" PHMS, for jack mounting;

#4-40 x 1/2" phillips FHMS, for module insert mounting.

MODULE INSERTS

Available with 6 holes or blank faces. See “ORDERING”

for colored modules.

ORDERING

Part Number

JP312000

Description

Order basic assemblies by part number from table. On

special order, various combinations of colored inserts

mounted in basic panels, as well as many types of

complete assemblies are possible. Provide complete

details with your inquiry or order.

19" wide x 2.625" high panel with 12 black modules

installed. Two, full width Kwik^®-Change designation

strips are included.

JPD312000

JP322000

Same as JP312000, except holes pre-drilled for

mounting vertical designation strips at each side.

Standard mount panels are available with holes pre-drilled

for vertical designation strips, Series DS320. Add prefix “D”

to part number (JPD312000, JPD322000, etc.). Refer to

“DESIGNATION STRIPS”.

23" wide x 2.625" high panel with 14 black modules

installed. Two, full width Kwik^®-Change designation

strips are included.

JPD322000

Same as JP322000, except holes pre-drilled for

mounting vertical designation strips at each side.

Mounting Screws: #6-32 P10725 for jack mounting and

#4-40 P2435 for insert mounting can also be ordered

separately. Contact Switchcraft.

Series JP312000, JPD312000, JP322000, JPD322000

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

( ")

TT-JAX .173 ^{JACK PANELS}211

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") JACK PANELS SERIES 1600, A1600, B1600, C1600

SERIES 1600 and A1600

SERIES B1600 and C1600

Jack Panels with optional jacks.

(See next page for specific part numbers.)

Jack Panels with optional jacks.

(See next page for specific part numbers.)

SERIES 1700

Series B1700

Jack Panel

with optional jacks.

(See next page for specific part numbers.)

with optional jacks.

(See next page for specific part numbers.)

Black thermoplastic UL 94V-0.

SERIES 1600 DOUBLE ROW JACK PANELS

Panel Insert: Thermoplastic polyester, UL 94V-0.

Marking Strip: White matte finish plastic.

Designation Strip Cover: Extruded clear plastic.

Black anodized panel has four inserts (24 single jacks). Double

row configuration accommodates 96 total jacks (48 pairs). Jack

spacing eliminates cross-patching of adjacent circuits when

twin plugs are used. Panel size: 1.75" x 19". Four, Kwik-

Change^®designation strips for circuit identification supplied.

ORDERING

1. Part number tables list jack panels with the most commonly

used jack circuits. Custom jack panels can be built on

special order to OEM requirements. Typical special

order features are:

• Lamp jack with incandescent or LED lamps.

• Solder lug or wire-wrapping terminals.

• Pre-printed designation strips.

SERIES A1600 DOUBLE ROW JACK PANELS

Similar to Series 1600, except mounts 104 jacks. Jacks

are spaced on .312" centers for maximum jack density. Four,

Kwik-Change^®designation strips supplied.

SERIES B1600 THREE ROW JACK PANELS

2.625" x 19" panel size yields high density (144 jacks). Jacks

are paired for single or twin plugs without cross-patching. Six,

Kwik-Change^®designation strips supplied.

• TT-Switch® switches with wide switching selection.

2. Contact Switchcraft for all special order items.

SPECIFYING NOTE:

SERIES C1600 THREE ROW JACK PANELS

Similar to B1600, except maximum jack density (156 jacks).

Six, Kwik-Change^®designation strips supplied.

Prefix letter “D” on part number indicates panels are drilled for

mounting vertical designation strips on both ends. EXAMPLE -

D1600, AD1632B, WCD1634B (vertical designation strips not

included). Order DS321 for 1.734" high panels; DS350 for

2.069" high panels. See “Designation Strips” section.

The most commonly-used combinations of panels and jacks

are listed on following page. 1600, A1600, B1600, C1600 panels

can be assembled with many different “bantam type” jacks.

SERIES 1700 TWIN ROW JACK PANELS

Standard 1.75" x 19" panel accepts 48 TT-Twin-Jax^®jacks.

Two, Kwik-Change^®designation strips supplied.

SERIES B1700 THREE ROW JACK PANELS

Accepts 48 Tri-Jax^®with alternate mounting centers to

eliminate cross-patching between adjacent circuits. Panel size:

1.75" x 19". Two, Kwik-Change^®designation strips supplied.

SPECIFICATIONS

Bussing type terminals which allow

you to buss jacks quickly and easily

are available on special order.

SERIES 1600, A1600, B1600, 1700, B1700

Panel and Designation Strip: Aluminum alloy, extruded.

Per QQ-A-200/8. Black anodized per MIL-A-8625C.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

212 ^TT-JAX.173 JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") JACK PANELS – SERIES 1600, A1600, B1600, C1600

(continued)

Jack Data¹

Panel Data

Jack Data

Panel Data

SERIES 1600 AND A1600

SERIES C1600

Part Number Part Number Quantity

Dimensions

Mount

Part Number Part Number Quantity

Dimensions

Mount

1600

w/o Jacks¹

TT32A

C1600

w/o Jacks¹

TT34B

D1600

CD1600

19"

x

1632A

C1634B

156

Standard

D1632A

1632B

TT32A

CD1634B

WC1634B

WCD1634B

TT34B

2.609"

TT32B

WTT34B

D1632B

W1632B

WD1632B

1634B

TT32B

96

Standard

19"

x

1.734"

WTT32B

TT34B

SERIES 1700

Part Number Part Number Quantity

Dimensions

Mount

1700

w/o Jacks⁴

TT89

D1634B

W1634B

WD1634B

A1600

TT34B

D1700

1789

WTT34B

w/o Jacks¹

TT32B

19"

x

1.734"

48

Standard

Twin-Jax^®

D1789

W1789

WD1789

TT89

WTT89

AD1600

A1632B

AD1632B

A1634B

AD1634B

WA1634B

WAD1634B

TT32B

104

SERIES B1700

TT34B

Part Number Part Number

Quantity

Dimensions

Mount

WTT34B

B1700

w/o Jacks⁵

TT95

BD1700

B1795

BD1795

WB1795

WBD1795

B1796

TT95

SERIES B1600

19"

x

1.734"

WTT95

TT96

48 Tri-Jax^®

Standard

Part Number Part Number Quantity

Dimensions

Mount

B1600

w/o Jacks¹

TT32B

BD1600

B1632B

BD1632B

B1634B

BD1634B

WBD1634B

B1650

BD1796

WB1796

WBD1796

TT96

WTT96

TT32B

TT34B

19"

x

2.609"

Standard

TT34B

144

PANEL INSERTS

WTT34B

Note 2

Part Number

TT505

Insert Description

For Panels

Without jacks, 24 holes

Blank

A1600, B1600

1600, B1600, C1600

1700

BD1650

WB1650

WBD1650

Note 2

◊TT506

◊TT507

◊TT508

◊TT509

◊TT511

Note 3

Without jacks, 48 holes

Blank

Note 3

1700

1. Accepts indicated number of single TT-Jax^®, TT-Switches^®,

TT-Lamp-Jax^®or any combination.

2. Three-row panel assembly with 96 TT34B Jax (top 2 rows);

and 48 TT32B Jax (bottom row).

Without jacks, 26 holes

Without jacks, 72 holes

A1600, C1600

B1700

3. Same as Note 2 above, except jacks have wire-wrapping terminals.

4. Accepts 48 TT Twin-Jax^®.

5. Accepts 48 TT Tri-Jax^®.

◊ Special order only; contact Switchcraft.

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

"

( )

TT-JAX .173 JACK PANELS

213

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") JACK PANELS –SERIES 1600, A1600,

B1600, C1600 (continued)

Series 1600 & A1600

Series B1600 & C1600

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

214 ^TT-JAX.173 JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") JACK PANELS – SERIES 1600, A1600,

B1600, C1600 (continued)

Series 1700

Series B1700

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

"

( )

MODULAR TT-JAX .173 PANELS

215

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MODULAR TT-JAX^®(.173") PANELS - BLANK SERIES TT51, TT53, TT56, TT59

SERIES TT56

SERIES TT51

SERIES TT59

SERIES TT53

Ten series of blank panels are available in 19" and 23"

widths, standard or flush mounting, and double, twin or three

row configurations. OEM’s can order blank components and

individual modules, jacks, switches and lamp jacks for

production line assembly according to standard or special

front panel configurations. Kwik-Change^®designation strips

are supplied with panels for custom legend marking.

Flush mounting styles can use extension legs (on special

order), for stand-off mounting from front of rack. Contact

Switchcraft for Mounting Bracket Kit K107.

Series

Number¹

Description²

19" double row standard mount panel. Mounts 96 single

jacks on 24 modules.

19" three row standard mount panel. Mounts 48 Tri-Jax^®

jacks on 24 modules.

23" three row standard mount panel. Mounts 56 Tri-Jax^®

jacks on 28 modules.

TT51

TT53

TT54

TT55

TT56

TT58

TT59

TT60

TT61

TT62

19" double row flush mount panel. Mounts 96 single

jacks on 24 modules.

SPECIFICATIONS

Panel and Designation Mounting Strip: Aluminum alloy,

extruded per QQ-A-200/8. Black anodized per MIL-A-8265C.

Marking Strip: Matte finish white plastic.

23" double row flush mount panel. Mounts 112 single

jacks on 28 modules.

23" three row flush mount panel. Mounts 56 Tri-Jax^®

jacks on 28 modules.

Designation Strip Cover: Extruded clear plastic.

SPECIFYING NOTE: Part numbers in table are for

blank panels only.

19" twin row standard mount panel. Mounts 48 TT

Twin-Jax^®jacks on 24 modules.

ORDERING

23" twin row standard mount panel. Mounts 56 TT

Twin-Jax^®jacks on 28 modules.

1. Order by part number from table

2. Refer to jack section to specify other jacks

and components.

19" twin row flush mount panel. Mounts 48 TT

Twin-Jax^®jacks on 24 modules.

23" twin row flush mount panel. Mounts 56 TT

Twin-Jax^®jacks on 28 modules.

◊ Special order only. Contact Switchcraft.

1. Prefix TTD for standard mounting panels indicates predrilled holes for

mounting “X Wide” vertical designation strips. See “Designation Strips” section.

2. Each panel includes integral designation mounting strip, marking strips

and clear plastic covers.

3. Contact Switchcraft for any special order items.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

216 ^{TT MODULE INSERTS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT MODULE INSERTS – SERIES TT91, TT92 AND TT93

SERIES TT92

SERIES TT-93

SERIES TT91

TT91402

TT91202

TT91002

TT92402

TT92202

TT92002

TT93602

TT93302

TT93002

(black, 4 hole) (black, 2 hole) (black, blank) (black, 4 hole) (black, 2 hole) (black, blank) (black, 6 hole) (black, 3 hole) (black, blank)

Module colors are black or gray (standard); red, green, blue,

white and yellow available on special order. Each module has

a matte finish front surface and includes two mounting screws

(Switchcraft P2348).

SERIES TT91 (For Double Row Panels)

Color

Openings

2

4

Blank

SERIES TT91

Red

Black

Green

Blue

◊TT91401

◊TT91402

◊TT91403

◊TT91404

◊TT91405

◊TT91408

◊TT91411

◊TT91201

◊TT91202

◊TT91203

◊TT91204

◊TT91205

◊TT91208

TT91211

◊TT91001

◊TT91002

◊TT91003

◊TT91004

◊TT91005

◊TT91008

◊TT91011

Choice of blank, two- or four-hole modules for double row

panels Series TT51, TT55 and TT56. The following

components are used with Series TT91 modules:

1. Front mount TT-Jax^®jacks.

White

Yellow

Gray

2. Front mount TT-Switch^®switches Series TT300FM

and WTT420FM.

3. Front mount TT Lamp Jax^®lamp jacks TT420FM

and WTT420FM.

SERIES TT92 (For Twin Row Panels)

SERIES TT92

Openings

2

Color

Blank, two- or four-hole modules for twin row panels Series

TT59, TT60, TT61 and TT62. TT Twin-Jax^®jacks are used

with these modules.

4

Blank

Red

Black

Green

Blue

◊TT92401

◊TT92402

◊TT92403

◊TT92404

◊TT92405

◊TT92408

◊TT92411

◊TT92201

TT92202

◊TT92203

◊TT92204

◊TT92205

◊TT92208

TT92211

◊TT92001

◊TT92002

◊TT92003

◊TT92004

◊TT92005

◊TT92008

◊TT92011

SERIES TT93

Blank, three- or six-hole modules for three row panels

Series TT53, TT54, TT57 and TT58. Tri-Jax^®jacks are

used with these modules.

White

Yellow

Gray

SPECIFICATIONS

Module: Precision molded thermosetting plastic in colors.

Mounting Screws: Black zinc, #3-48 x .312" flat head

machine screws.

SERIES TT93 (For Three Row Panels)

ORDERING

1. Order by part number from tables.

2. Contact Switchcraft for any special order items.

Color

Openings

2

4

Blank

Red

Black

Green

Blue

TT93601

TT93602

TT93603

TT93604

TT93605

TT93608

TT93611

◊TT93301

TT93302

◊TT93303

◊TT93304

◊TT93305

◊TT93308

TT93311

TT93001

TT93002

TT93003

TT93004

TT93005

TT93008

TT93011

SPECIFYING NOTE: The part numbers listed on this

page are for modules only. Refer to following page for

specifying panel assemblies with components installed.

White

Yellow

Gray

◊ Special order only; contact factory for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

"

( )

MODULAR TT-JAX .173 ^{JACK PANELS}217

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MODULAR TT-JAX^®(.173") JACK PANELS –

SERIES TT5102000, TT5202000, TT5502000, TT5602000

Series TT5102000,

TT5202000 (Typical)

Series TT5502000,

TT5602000 (Typical)

Shown w/mounting bracket K107

(not supplied).

SERIES TT5102000*

Jack Data

Panel Data

Modular double row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Mounts 96 TT-Jax^®single jacks, lamp jacks and/or

switches.

Part Number

Qty. Width Mount Modules

Part Number

TT5102000

◊TT5102S31

◊TT5102W31

TT5102S32A

TT5102W32A

TT5102S32B²

TT5102W32B

◊TT5102S33B

◊TT5102W33B

TT5102S34B²

TT5102W34B

TTD5102000

TTD5102S31

Through

0

without jacks

TT31FM

WTT31FM

TT32AFM

SERIES TT51020001*

Modular double row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Mounts 96 TT-Jax^®single jacks, lamp jacks and/or

switches. Comes supplied with cable tie bar.

WTT32AFM

TT32BFM

96

19"

Stan-

dard

24

(Black)

WTT32BFM

TT33BFM

SERIES TT5202000*

WTT33BFM

TT34BFM

Similar to TT5102000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 112

TT-Jax^®single jacks, jack lamps and/or switches.

WTT34BFM

without jacks

0

SERIES TT5502000

Modular double row, 1.75" high x 19" wide, flush mount.

Supplied with 24 black modules, designation strips, and

covers. Panels can be mounted flush with rack/control panel

surface, or use with extension legs for standoff mounting with

easy access to rear of jacks for testing/monitoring. Mounts

96 TT-Jax^®single jacks, lamp jacks and/or switches.

Note¹

without jacks

Note¹

96

TTD5102W34B

TT5202000

TTD5202000

TT5202S31

Through

0

SERIES TT5602000

Stan-

dard

28

(Black)

TT5202W34B

TTD520231

Through

Similar to TT5502000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 112

TT-Jax^®single jacks, jack lamps and/or switches.

112

23"

Note¹

without jacks

Note¹

TTD5202W34B

TT552000

ORDERING

1. Order part number from table

2. Contact Switchcraft for any special order items.

3. Separate components can be ordered.

* Prefix TTD indicates panel is pre-drilled with countersunk

holes for mounting “X-Wide” vertical designation strips.

See “DESIGNATION STRIPS” section.

0

96

0

TT5502S31

Through

24

(Black)

19"

23"

Flush

TT5502W34B

TT5602000

TT5602S31

Through

without jacks

Note¹

28

(Black)

112

TT5602W34B

◊ Special order only; contact Switchcraft for price and delivery.

1 Complete panel part number with jacks installed can be constructed as

shown for Series TT51.

2. Add a “1” to part number to specify cable tie bar.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

218 ^{MODULAR TT-JAX}.173 JACK PANELS

®

"

( )

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MODULAR TT-JAX^®(.173") JACK PANELS –

SERIES TT5102000, TT5202000,

TT5502000, TT56020000 (continued)

Series TT51-02000, TT52-02000 (Typical)

Series TT55-02000, TT56-02000 (Typical)

Jack Panel Dimensions - inch (mm)

Series

Number

TT51

◊TT52

TT55

A

B

C

D

-

19 (482.6)

23 (584.2)

19 (482.6)

23 (584.2)

18.3 (465.1) 1.013 (25.7)

22.3 (566.7) 1.648 (41.9)

18.3 (465.1) 1.013 (25.7)

17.125 (435)

TT56

22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

◊ Special order only; contact Switchcraft for price and delivery.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

TT-JAX .173 ^{TWIN ROW AND THREE ROW JACK PANELS}219

®

"

( )

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TWIN ROW AND THREE ROW JACK PANELS

Series TT5902000

Jack Data

Panel Data

Series TT6102000

Part Number

Qty. Width Mount Modules

Part Number

TT5902000

TT5902S89

TT5902W89

TTD5902000

TTD5902S89

TTD5902W89

TT6002000

TTD6002000

TT6002S89

TT6002W89

TTD6002S89

TTD6002W89

TT6102000

TT6102S89

TT6102W89

TT6202000

TT6202S89

TT6202W89

TT5302000

◊TT5302S95

TT5302W95

◊TT5302S96

TT5302W96

TTD5302000

TTD5302S95

Through

0

without jacks

TT89FM

48

WTT89FM

without jacks

TT89FM

19"

0

Series TT5302000, TT5402000 (Typical)

48

WTT89FM

Stan-

dard

24

(Black)

0

without jacks

Note¹

SERIES TT5902000*

Modular twin row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Mounts 48 TT Twin-Jax^®twin jacks.

56

23"

Note¹

None

56

0

SERIES TT6002000*

Similar to TT5902000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 56 TT

Twin-Jax^®twin jacks.

19"

23"

Note¹

48

0

Flush

28

(Black)

without jacks

Note¹

SERIES TT6102000

56

0

Modular twin row, 1.75" high x 19" wide, flush or standoff

mount. Supplied with 24 black modules, designation strips,

and covers. Mounts 48 TT Twin-Jax^®twin jacks.

without jacks

TT95FM

SERIES TT6202000

WTT95FM

TT96FM

48

Similar to TT6102000, except 23" wide. Supplied with 28

black modules, designation strips, and covers. Mounts 56 TT

Twin-Jax^®twin jacks.

19"

Stan-

dard

24

(Black)

WTT96FM

without jacks

0

SERIES TT5302000*

Note²

Modular three row, 1.75" high x 19" wide, standard mount.

Supplied with 24 black modules, designation strips, and

covers. Designed for LINE, EQUIP and MONITOR patch

connections. Mounts 48 Tri-Jax^®triple jacks.

48

TTD5302W96

TT5402000

TTD5402000

TT5402S95

Through

0

without jacks

Note²

SERIES TT5402000*

Similar to TT5302000, except 23" wide. Supplied with

28 black modules, designation strips, and covers. Mounts 56

Tri-Jax^®triple jacks.

TT5402W96

TTD5402S95

Through

56

23"

Stan-

dard

28

(Black)

Note²

SERIES TT5702000

TTD5402W96

TT5702000

TT5702S95

Through

Modular three row, 1.75" high x 19" wide, flush or standoff

mount. Supplied with 24 black modules, designation strips,

and covers. Mounts 48 Tri-Jax^®triple jacks.

without jacks

Note²

0

48

19"

23"

Flush

24

(Black)

SERIES TT5802000

TT5702W96

TT5802000

TT5802S95

Through

Similar to TT5702000, except 23" wide. Supplied with

28 black modules, designation strips, and covers. Mounts

56 Tri-Jax^®triple jacks.

without jacks

Note²

0

56

28

(Black)

ORDERING

TT5802W96

1. Order part number from table

◊ Special order only; contact Switchcraft for price and delivery.

1. Complete panel part number with jacks installed can be constructed as

shown for Series TT59 or TTD59.

2. Complete panel part number with jacks installed can be constructed as

shown for series TT53.

2. Contact Switchcraft for any special order items.

*Prefix TTD indicates panel is pre-drilled with countersunk

holes for mounting “X-Wide” vertical designation strips.

See “DESIGNATION STRIPS” section.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

220 ^TT-JAX.173 TWIN ROW AND THREE ROW JACK PANELS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") TWIN ROW AND THREE ROW JACK PANELS (continued)

Series TT5902000 and

TT6002000 (Typical)

Jack Panel Dimensions - inch (mm)

Series

Number

TT59

TT60

TT61

TT62

A

B

C

D

-

19 (482.6)

23 (584.2)

19 (482.6)

23 (584.2)

18.3 (465.1) 1.013 (25.7)

22.3 (566.7) 1.648 (41.9)

22.3 (566.7) 1.013 (25.7)

17.125 (435)

22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

Series TT6102000 and

TT6202000 (Typical)

Series TT5302000 and

TT5402000 (Typical)

Jack Panel Dimensions - inch (mm)

Series

Number

TT53

TT54

TT57

A

B

C

D

-

Series TT5702000 and

19 (482.6)

23 (584.2)

19 (482.6)

23 (584.2)

18.3 (465.1) 1.013 (25.7)

TT5802000 (Typical)

22.3 (566.7) 1.648 (41.9)

22.3 (566.7) 1.013 (25.7) 17.125 (435)

22.3 (566.7) 1.648 (41.9) 21.125 (536.6)

◊TT58

Series TT5702000 and

TT5802000 (Typical)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

TT-JAX .173 ^{CONNECTORIZED JACKFIELDS}221

®

"

( )

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS –

SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE

2-wire TT-Connectorized Jackfield

TT2W48VCF1

6-wire TT-Connectorized Jackfield

4-wire TT-Connectorized Jackfield

TT4W24MCF1

2-WIRE TT-CONNECTORIZED JACKFIELDS, SERIES TT

Contains 48, 2-wire circuits. Arrangements include:

LINE-DROP or Signal E/M, or LINE-DROP-MON. Available

with MONITOR jack row. On rear panel, LINE connectors are

receptacles and DROP connectors are plugs. LINE and DROP

circuits may be isolated from each other for separate monitoring.

On special order, 48 circuits LINE/COMBINATION DROP/MON

or 96 circuits, LINE/DROP or Signal E/M may be specified.

6-WIRE TT-CONNECTORIZED JACKFIELDS,

SERIES TT

6-Wire jackfields contain 48, 6-wire circuits for MOD-DEM/EQ

IN EQ OUT/MON/SIG LINE/SIG EQ patching with toll test

boards. Available with or without MONITOR jack row. On rear

panel, MOD, EQ IN and SIG LINE connectors are receptacles

and DEM, EQ OUT and SIG EQ connectors are plugs. The

following can be specified on special order: 12 circuits,

DEM-MOD/EQ IN-EQ OUT/MON/SIG E/M; 48 circuits, signal

E/M leads separated; 48 circuits for D3 channel banks.

2-WIRE TT-CONNECTORIZED PC JACKFIELD,

SERIES TTPC

ORDERING

Same as 2-Wire TT-connectorized jackfields above, except all

connections are machine-soldered on a double-sided PC 1. Order by part number from tables.

board instead of hand wired.

2. Contact Switchcraft for any special order items.

4-WIRE TT-CONNECTORIZED JACKFIELDS,

SERIES TT

4-Wire jackfields have 24, 4-wire circuits for MOD-DEM/EQ

IN-EQ OUT/MON patching, or may be used for other 4-wire

patching applications. Can be supplied with or without

MONITOR jack row. On rear panel, MOD AND EQ IN

connectors are receptacles and DEM and EQ OUT

connectors are plugs.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

222 ^TT-JAX.173 CONNECTORIZED JACKFIELDS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS –

SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE (continued)

Back Frames: Cold rolled steel, zinc-plated with iridescent

tarnish-resistant finish.

Screws, Nuts and Lockwashers: Steel, clear iridite

tarnish-resistant finish over zinc-plating.

Connectors: 50-pin micro/pierce plugs and receptacles.

Cable Tie Bar: Aluminum hexagon alloy. 6061-T6, clear iridite

finish per MIL-C-5541 (not hinged versions only).

Cables: 25 pair, 24 AWG solid copper wire, tinned and

annealed, covered with insulating grade thermoplastic jacket.

Cable Ties: Thermoplastic, locking-non-releaseable,

30 pounds minimum loop tensile strength.

SPECIFICATIONS

Panel and Integral Designation Strip: Aluminum alloy,

extruded per QQ-A-200/8. Black anodized per MIL-A-8265.

Modules: Precision-molded thermosetting plastic. Black

standard. Other colors on special order.

Mounting Screws: Black zinc, #3-48 x 312" flat head

machine screw.

TT-Jax^®Jacks: See jacks section for TT-Jax^®specifications.

Marking Strip: Matte finish white plastic.

Vertical Designation Strip: Extruded aluminum, black

anodized.

2- & 4-Wire Connectorized Jackfields

(4-Wire Style Shown)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

"

( )

TT-JAX .173 CONNECTORIZED JACKFIELDS – PART NUMBERS

223

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS (continued)

PART NUMBERS

1. Compose part numbers from data below to specify your

jackfield...or use the table to order popular jackfields.

SPECIFYING NOTE: Any jackfield can be manufactured

with AMP CHAMP connectors. Contact Switchcraft.

2

4

V

C

F

1

T

2 W

UNIT TYPE

NUMBER OF

CIRCUITS

RACK MOUNTING

1 - 19 inch

JACK TYPE

TT - .173"

JP - LONG FRAME (1/4")

2W - 2 WIRE

4W - 4 WIRE

6W - 6 WIRE

12

24

48

96

2 - 23 inch

TYPE OF HINGE

F - FRONT PANEL HINGED

R - REAR PANEL HINGED

N - NON-HINGED

MONITOR JACK

V - WITHOUT

M - WITH

WIRE TERMINATION

C - AMPHENOL BLUE RIBBON

B - AMP CHAMP

W - TERMINAL BLOCK

TYPICAL PART NUMBERS

2-WIRE JACKFIELDS

Part Number

Description

TT2W48VCF1

TT2W48VCN1

TT2W48MCF1

TT2W48MCN1

Hinged front panel.

Front panel NOT hinged.

Same as TT2W48VCF1, except with MONITOR jack row.

Same as TT2W48VCN1, except with MONITOR jack row.

4-WIRE JACKFIELDS

Part Number

Description

TT4W24MCF1

TT4W24MCN1

TT4W24VCF1

TT4W24VCN1

Hinged front panel with MONITOR jack row.

Front panel NOT hinged with MONITOR jack row.

Same as TT4W24MCF1, except no MONITOR jack row.

Same as TT4W24MCN1, except no MONITOR jack row.

6-WIRE JACKFIELDS

Part Number

TT6W48MCF1

16J1055

TT6W48MCN1

TT6W48VCF1

TT6W48VCN1

Description

Hinged front panel with MONITOR jack row.

Front panel NOT hinged with MONITOR jack row.

Same as TT6W48MCF1, except no MONITOR jack row.

Same as TT6W48MCN1, except no MONITOR jack row.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

224 ^TT-JAX.173 CONNECTORIZED JACKFIELDS SCHEMATICS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS (continued)

TYPICAL CIRCUIT ARRANGEMENTS - 2-WIRE

TYPICAL CIRCUIT ARRANGEMENTS - 4-WIRE

TYPICAL CIRCUIT ARRANGEMENTS - 6-WIRE

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

"

( )

TT-JAX .173 CONNECTORIZED JACKFIELDS SCHEMATICS

225

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

®

TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued)

No. TT2W48VCF1 (hinged)

No. TT2W48VCN1 (not hinged)

(Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

No. TT2W48MCF1 (hinged)

No. TT2W48MCN1 (not hinged)

(Non-Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

226 ^TT-JAX.173 CONNECTORIZED JACKFIELDS SCHEMATICS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS (continued)

No. TT4W24VCF1 (hinged)

No. TT4W24VCN1 (not hinged)

(Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

No. TT4W24MCF1 (hinged)

No. TT4W24MCN1 (not hinged)

(Non-Hinged version shown)

TYPICAL CIRCUIT ARRANGEMENT

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

TT-JAX .173 ^{CONNECTORIZED JACKFIELDS SCHEMATICS}227

®

"

( )

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

®

TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued)

No. TT6W48MCF1 (hinged)

No. TT6W48MCN1 (not hinged)

(Hinged version shown)

No. TT6W48VCF1 (hinged)

No. TT6W48VCN1 (not hinged)

TYPICAL CIRCUIT ARRANGEMENT

No. TT6W48MCF1 (hinged)

No. TT6W48MCN1 (not hinged)

(with Monitor Jacks)

No. TT6W48VCF1 (hinged)

No. TT6W48VCN1 (not hinged)

(no Monitor Jacks)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

"

( )

228 ^TT-JAX.173 CONNECTORIZED JACKFIELDS SCHEMATICS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT-JAX^®(.173") CONNECTORIZED JACKFIELDS

REAR VIEW —ROTATED

No. 16J-1055

TYPICAL CIRCUIT ARRANGEMENTS

Inch

(mm)

DIMENSIONS ARE FOR REFERENCE ONLY

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^TT-JAX^®^{(.173”) CONNECTORIZED JACKFIELDS}229

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT-Jax^®(.173") CONNECTORIZED JACKFIELDS

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

TT^®LAMPS AND JEWEL ASSEMBLIES

230

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

TT^®LAMPS AND JEWEL ASSEMBLIES

Steady “On” Lamp

Series TT450

Blinking/Steady

“On” Lamp

SCHEMATIC

SERIES TT-450 LAMPS

Red LED and series dropping resistor are molded into

compact cartridge with bi-pin terminals for use with TT

Lamp-Jax^®lamp jacks. Colored bezels are molded in for color

coding of functions; colors are black, red, green, white and

yellow. On special order, blue or other colors are available.

TT-LED Lamps

Installed

Standard voltages are 6, 24 and 48 V (DC only). No tools are

required for lamping/relamping. Simply slip TT-LED into lamp

jack with (+) terminal up. If it doesn’t light, remove it, rotate it

180°, and reinsert it into jack.

FLASHING/STEADY ON LEDS

Yellow, green and red LEDs are 2-pin cartridge plug-ins which

operate from a 48 VDC supply. When 48 V is applied, LED

flashes for 30 seconds, then changes to steady “On” condition.

SPECIFICATIONS

Body: Thermoplastic, UL 94V-0 rated.

LED Colors: Yellow, green or red.

Housing: Molded black plastic.

Bezel: Molded plastic in colors.

LED: Red illumination.

Pins: T-1 3/4 bi-pin configuration.

Part Number

15J9068

Description

Red flashing/continuous

Yellow flashing/continuous

Green flashing/continuous

Amber flashing/continuous

Part

Number

Bezel

Voltage Color

Part

Number

Bezel

Voltage Color

6

15J9076

TT45106 TT45124 TT45148 TT45206 TT45224

48 TT45306 TT45324 TT45

TT45406 TT45424 TT45448edTT4506 TT45524

15J9077

TT

T

4

T

5

4

1

5

0

2

6

24

◊3

T

4

T8

45406

R

Blue

White

Yellow

TT45124

◊TT45424

24

48

6

24

48

6

15J9078

TT45548 TT45806 TT45824 TT45848

TT45148

TT45206

TT45224

TT45248

TT45306

TT45324

TT45348

48

6

◊TT45448

TT45506

TT45524

TT45548

TT45806

TT45824

TT45848

TT-JEWEL ASSEMBLY

Black

24

48

6

24

48

Green

24

48

ORDERING

1. Order by part number from table.

2. For special order items, such as other LED colors,

Panel with TT-Jewel Assemblies

and TT-Switches installed

voltages, lamps with 25% reduced power consumption,

etc., contact Switchcraft.

Jewel assemblies use bi-pin lamp and act as lighted jewel and

lamping/relamping tool. Simply slip bi-pin lamp in brass collar

and insert lamp with pins in vertical plane. Lamp automatically

seats properly. Jewel is molded plastic in colors; sleeve is brass.

Part Number

TT401

TT403

Color

Red

Green

Blue

Part Number

TT408

Color

Yellow

Amber

Black*

TT413

TT510

TT404

TT405

White

*Used as hole plug where

no jack is installed.

Series TT-450 TT-LED Lamps

LAMPS

Part Number

P2290

Description

6.3 V, GE No. 7377.

P2315

P2316

P2456

6.3 V, GE No. 7381. Avg. life: 50K hrs. @ 200 mA.

28 V, GE No. 7387. Avg. life: 25K hrs. @ 40 mA.

24 V, GE No. 7001.

Flashing/Steady “On” Lamps

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{LONGFRAME SWITCHBOARD SWITCHES}231

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

LONGFRAME SWITCHBOARD SWITCHES

SERIES 11000 and 11200

Premium quality, long frame switches, designed especially for

jack panel mounted switching. Standard actuations are

push-lock/pull-release, 2-position turn button and 3 position turn

button. Many contact forms available. Mounts in Switchcraft

Jack Panels Series 1200, 1400, 2400, 2600, 2800, modular JP^®

jack panels, and other standard telephone jack panels. Part

numbers in table indicate “A” frame. For same switch with “C”

frame, add prefix “C” to part number. Many circuit forms not

shown in tables are available on special order. Long leaf springs

have no forms at point of flexing, which insures long life. Welded

crossbar palladium contacts rated at 2A 200W maximum are

standard. Fine silver (for higher currents) or gold alloy (dry circuit

to 1A) contacts are available on special order. Contact Switchcraft.

W11012L

11206L

Part Numbers

Locking Momentary

Circuit

PUSHBUTTONS - SERIES 11000

◊11001L

◊11002L

11003L

◊11001

◊11002

11003

◊W11003

◊11003D

◊11004

◊11005

11006

◊W11006

◊11006D

◊11008

◊11009

11012

1-A

1-B

SPECIFICATIONS

Frame, Screws and Twin Nut: Steel, plated.

Springs, Pressure Plate and Terminals: Copper alloy.

Solder lugs are tin-dipped.

Contacts: Welded crossbar palladium are standard. Fine sil-

ver or gold alloy are available on special order.

Insulation: Rigid plastic. Extruded plastic tubing through

stack.

1-C

◊W11003L

◊11003DL

◊11004L

◊11005L

11006L

◊W11006L

◊11006DL

◊11008L

◊11009L

◊11012L

◊W11012L

1-D

2-A

2-B

2-C

2-D

4-A

3-C

Knob: Molded black plastic. Turn-key type faced with white

arrow.

Bushing: Copper alloy, nickel-plated.

4-C

◊W11012

ORDERING

1. Order by part number from table.

2. For special order items, contact Switchcraft.

TURN BUTTONS - SERIES 11200

◊11201L

◊11202L

11203L

◊11201

◊11202

11203

◊W11203

◊11203D

◊11204

◊11205

11206

◊W11206

◊11206D

◊11208

◊11209

11212

1-A

1-B

1-C

◊W11203L

◊11203DL

◊11204L

◊11205L

11206L

◊W11206L

◊11206DL

◊11208L

◊11209L

◊11212L

◊W11212L

1-D

2-A

2-B

2-C

2-D

4-A

3-C

4-C

◊W11212

◊ Special order only; contact Switchcraft.

Mounting Screws: #6-32, P10725, can be ordered separately.

Contact Switchcraft. (Screws not supplied with switches.)

“T-Switch” Switches

A

B

C

D

E

F

Basic Schematic Circuits

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

232

DUMMY PLUGS AND HOLE PLUGS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DUMMY PLUGS AND HOLE PLUGS

491

492

493

When inserted into a standard size telephone jack, the dummy

plug actuates springs like a normal plug, except no signal is

conducted through since the plug is made of non-conducting

plastic. Dummy plugs can also be used to plug-up unused jacks

to prevent accidental insertion of an incorrect plug.

Description

Interchangeable

with

Part

Number

Part No. Conductors

Color

Red

WEco

–

Trimm

–

49101

49102

49105

49201

49202

49205

49301

49302

49305

3

2

Black

White

Red

Black

White

Red

–

SERIES 491: 3-conductor with .206" diameter finger. Mates

with MT342B and MT344B MT-Jax^®, Series M Hi-D Jax^®, and

other standard telephone jacks having .21" inside diameter

sleeves.

258F

258C

258E

165F

165C

165E

558D

558C

558E

556D

556C

–

Black

White

SERIES 492: 3-conductor with .25" diameter finger. Mates with

3-conductor MT-Jax^®and Series M Hi-D Jax^®, and other

standard telephone jacks have .25" inside diameter sleeves.

SERIES 493: 2-conductor with .25" diameter finger. Mates with

2-conductor MT-Jax^®, Series M Hi-D Jax^®, and other standard

telephone jacks having .25" inside diameter sleeves.

No. 491

No. 492

No. 493

PLASTIC HOLE PLUG

Hole Plug P1801

Used to seal off unused holes in jack

panels, Series 1200, 1400, 2400, 2600

and JP012000 through JP122000.

Constructed of dimensionally stable

molded black plastic.

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

®

(

)

TT ^{BANTAM CIRCUIT GUARD PLUGS}233

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

TT^®(BANTAM) CIRCUIT GUARD PLUGS

APPLICATION

Circuit guard plugs snap into TT-Jax^®(bantam)

jacks eliminating accidental or unauthorized

insertion of a plug into a critical circuit. The circuit

guards plugs do not actuate the jack springs.

These plugs seal the jack bushing and provide

an additional means of circuit identification.

Circuit guard plugs are available in three

different designs: Series TT512, Series TT513

and Series TT514. All three designs are molded

thermoplastic and are available in the following

colors: red, black, green, blue, white or yellow.

Base

SERIES TT512

TT512 circuit guard plugs cover an individual

jack opening and insert to an virtually flush

position with the front panel.

Marking Strip

Cover

Series

514

SERIES TT513

TT513 circuit guard plugs are similar to the

Series TT512 except the button extends

.219" from the front of the panel for easier

removal.

Series TT512

Series TT513

SERIES TT514

TT514 circuit guard plugs cover both the IN and

OUT jacks of two adjoining circuits while leaving

the monitor jacks exposed for circuit testing.

The four jack circuit guard plugs also include a

matte finish white plastic marking strip and

a clear extruded plastic window for additional

designation.

Part Number

TT5121

TT5122

TT5123

TT5124

Part Number

TT5131

Part Number

TT5141*

TT5142*

TT5143*

TT5144*

TT5145*

TT5148*

Color

Red

Black

Green

Blue

TT5132

TT5133

TT5134

TT5135

TT5125

TT5128

White

Yellow

TT5138

*Includes base, marking strip & cover.

SPECIFICATIONS

TT512 and TT513: Molded thermoplastic in colors.

TT514: Base: Molded thermoplastic in colors.

Marking Strip: Matte finish white plastic.

Cover: Clear extruded plastic.

ORDERING

1. Order by part number from table.

2. Contact Switchcraft for any special order items.

Series TT-512

Series TT-513

Series TT-514

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

234 ^{MINIATURE, DUMMY PLUGS, HOLE PLUGS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

MINIATURE, DUMMY PLUGS, HOLE PLUGS

TT5152 or TT206

TT203

TT-Terminating

Plug

TT510

Hole

Plug

TT205

TT-Dummy

Plug

TT515

TT-Dummy

Plugs

TT207 TT-Twin

Looping Plug

TT210

ORDERING

1. Order by part number from table.

2. Contact Switchcraft for any special order items.

Terminating, dummy and looping plugs are designed for

use with Tini-Telephone^®Jacks. TT-Phone Plugs are also

recommended for use on other miniature telephone jacks

with same bushing inside diameter and compatible tip

and/or ring spring configurations.

SPECIFICATIONS

Series TT200 Tip Rod, Ring and Sleeve:

Brass per QQ-B-626.

TT-TERMINATING PLUGS

TT-Phone Plug terminating plugs are used to terminate a

circuit with a specific resistive load. A precision 1/2 watt, ± 1%

resistor is molded into the handle of each terminating plug.

See “PLUG SCHEMATICS” for resistor wiring. Resistance

value is marked on plug handle. Other resistance values are

available on special order.

Handle: Molded PVC, ivory or black.

Series TT515: Molded of dimensionally stable plastic

in black, red or white.

Part No.

◊TT201

◊TT202

TT203

Description

2-conductor terminating-135Ω

2-conductor terminating-600Ω

3-conductor terminating-135Ω

3-conductor terminating-600Ω

2-conductor dummy

Schematic Color

1

2

5

6

3

4

5

6

–

Gray

Ivory

Black

Red

TT-DUMMY PLUGS

TT-Phone Plug dummy plugs are designed to be inserted into

phone jacks to actuate shunt and isolated switching circuits.

TT204

TT205

TT-LOOPING PLUGS

TT-Phone Plug looping plugs are used to loop or patch

adjacent jack circuits. See “PLUG SCHEMATICS” for wiring.

TT206

3-conductor dummy

◊TT207

TT208

TT209

TT210

TT510

2-conductor twin looping

3-conductor twin looping

2-conductor twin dummy

3-conductor twin dummy

Hole Plug

TT-HOLE PLUG

TT-Hole Plugs are used to close off unused openings in all

Switchcraft TT-Jack Panels. Molded of black plastic with brass

sleeve.

TT5151

TT5152

TT5155

2- or 3-conductor dummy

Black

White

◊ Special order only; contact Switchcraft for price and delivery.

Plug Schematics

1

2

3

4

5

6

Nos. TT-201, TT-202, TT-205

Nos. TT-207, TT-209

Nos. TT-515-1, -2

Nos. TT-203, TT-204, TT-206

Nos. TT-208, TT-210

Nos. TT-510

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^{DESTINATION STRIPS}235

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DESIGNATION STRIPS

Designation strips with protective covers are supplied with all

tini-telephone^®jack panels, jackfields and certain standard

jack panels. Replacement kits and individual parts are also

available. Legends can be marked in pencil, ink, or lettering

transfers. Kwik-Change^®is the name of all horizontal strips.

See illustration.

Three types of designation strips are available as accessories:

1. Kwik-Change single height.

2. Kwik-Change double height.

3. X-Wide vertical.

KWIK-CHANGE^®DESIGNATION STRIPS

(SINGLE HEIGHT)

Two types of single height designation strips are available:

1. SERIES 1600, A1600, B1600, C1600, 1700, B1700,

1400300, 2600300, JP012000 through JP122000

• Extruded aluminum mounting strip

• Four mounting screws

• Marking strips

• Clear plastic strip covers

Kwik-Change Designation Strip

Kit Number DS301 (single height)

Mounting strips are fastened with four mounting screws

provided. Marking strip slides into the clear plastic cover, and

cover is snapped into place on the mounting strip. Legends

can be marked in pencil, ink, lettering transfers, typewriter, etc.

SPECIFICATIONS

(Used on panels 1600, A1600, B1600, C1600, 1700, B1700)

Mounting Strip: Extruded aluminum black anodized

Cover: Clear extruded plastic.

Marking Strip: White matte finish plastic.

Screws: Copper alloy, plated.

(Used on panels 1400300, 1600300)

Mounting Strip: Aluminum alloy, extruded, black anodized.

Cover: Clear extruded plastic.

Kwik-Change Designation Strip

Kit Number DS318 (single height)

Marking Strip: White matte finish plastic.

Screws: Steel, plated.

SERIES TT51 through TT62, TT-Connectorized (2-, 4- and

6-Wire), JP012000 through JP122000, TTPC and DSX

panels. Mounting strips are extruded as part of the panel.

Otherwise, use is the same as above.

ORDERING

Order by part number from table.

Kwik-Change Designation Strip

Kit Number TT501 (single height)

Kwik-Change Designation Strip

Kit Number TT516 (single height)

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

236

DESIGNATION STRIPS

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

DESIGNATION STRIPS (continued)

SINGLE HEIGHT DESIGNATION STRIPS

Part No.

TT501

Description

For Panels

Part No.

DS301

Description

For Panels

Kits (single height) includes:

1-mounting strip (8.375" long)

1-cover

1600, 1700

(Alternate

spacing)

Kit (single height) includes:

1-mounting strip (17" long)

1-cover

1400301,

2600301

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

TT502

TT503

TT504

Marking Strip sheet (used with

Kit TT501 & TT521)

–

DS302

DS303

Cover (used with Kit DS301)

–

Marking strip sheet (used with

Kit DS301 and DS316).

Cover (used with Kit

TT501 and TT504)

–

DS306

DS307

Marking strip sheet (used with

Kit DS307 and DS308).

Kits (single height) includes:

1-mounting strip (8.375" long)

1-cover

1-marking strip sheet

(5 strips per sheet)

4-mounting screws

A1600, C1600

(Continuous

spacing)

Kit (single height) includes:

2-covers (16.5" long)

1-marking strip sheet

(5 strips per sheet)

JP012000,

JP032000,

JP052000

DS308

DS316

Kit (single height) includes:

2-covers (19.5" long)

1-marking strip sheet

(5 strips per sheet)

JP022000,

JP042000,

JP062000

TT519

Kit (single height) includes:

2-covers (9.61" long)

1- marking strip sheet

(5 strips per sheet)

TT52, TT54

TT56, TT58

TT60, TT62

(23" Panels)

Kit (single height) includes:

2-covers (16.25" long)

1- marking strip sheet

(5 strips per sheet)

JP072000

JP092000,

JP112000

TT520

TT521

Marking strip sheet (used with

Kit TT519)

–

Kit (single height) includes:

2-covers (8.25" long)

1- marking strip sheet

(5 strips per sheet)

TT51, TT53

TT55, TT57

TT59, TT61,

Connectorized

Jackfields

DS317

DS318

Marking strip sheet (used with

Kit DS318).

–

Kit (single height) includes:

2-covers (20" long)

1- marking strip sheet

(5 strips per sheet)

JP082000

JP102000,

JP122000

(2-, 4- and 6 wire)

KWIK-CHANGE^®DESIGNATION STRIPS

(DOUBLE HEIGHT)

Double height strips allow larger legends. Can be factory

installed on Series 1600, B1600, 1700 and B1700 panels, or

may be ordered separately for customer installation.

• Series 1600/B1600: Four strips can be mounted, two

above each row of jack openings.

Single Height Kwik-Change^®

Designation Strip, TT501

Series B1600

• Series 1700: Two strips can be mounted, two above or

two below (special order) the double row of jack openings.

• Series B1700: Two strips can be mounted (side-by-side)

above top row of jacks.

NOTE: When TT516 kits are mounted above top row of jacks on

Series 1600, B1600 and B1700, strips will overhang top edge

of panel by .156 inches For most applications, the strips help

seal the normal opening between adjacent panels. Series

B1700 panel mounting screws may have to be loosened to

facilitate removal of the panel above it in this type of installation.

Double Height Kwik-

Change Designation

Strip, TT516

SPECIFICATIONS

Mounting Strip: Black thermoplastic UL 94V-0.

Series 1700

Cover: Clear plastic.

Marking Strip: Matte finish white plastic.

Mounting Screws: Copper alloy, plated.

ORDERING

1. Order by part number from table.

2. To order double height strips installed on panels,

contact Switchcraft.

Series B1700

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

JACK PANELS

^KWIK-CHARGE^®^{DESIGNATION STRIPS – DOUBLE HEIGHT}237

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

®

KWIK-CHANGE DESIGNATION STRIPS (DOUBLE HEIGHT)

Kwik-Change^®Designation Strip

DS311 (double height)

DOUBLE HEIGHT DESIGNATION STRIPS

Part No.

DS311

Description

Kit (double height) includes:

1-mounting strip (17" long)

1-cover

For Panels

2600310,

1400315

Part No.

TT516

Description

Kit (double height) includes:

1-mounting strip (8.375" long)

1-cover

For Panels

1600, B1600,

1700, B1700

1-marking strip sheet

(3 strips per sheet)

1-marking strip sheet

(3 strips per sheet)

4-mounting screws

DS312

DS313

Cover (used with Kit DS311)

Marking strip sheet (used with

Kit DS311)

–

TT517

TT518

Marking strip sheet (used with

Kit TT516)

Cover (used with Kit TT516)

–

X-WIDE^®VERTICAL DESIGNATION STRIPS

X-Wide designation strips mount on either side (or both) of

standard 19" and 23" wide panels and do not interfere with

horizontally mounted strips. Each kit contains two mounting

brackets which easily fasten with mounting screws provided.

Marking strips and clear plastic covers slide into place. Each

kit fits onto both sides of a jack panel. X-Wide strips are used

on the following panels:

UNDRILLED

PREDRILLED

3-row Jack Panels Assembly

with DS323 X-Wide

Designation Strip installed

1600, A1600, 1700 B1700, TT51

through TT62, 2-, 4- & 6-Wire

TT-Connectorized Jackfields, 2- & 6-Wire TT-Connectorized

D1600, D1700, BD1700,

TTD51 through TTD62, 2- 4 &

4-Wire TTPC Connectorized

Jackfields, 1200, 1400, 1400320,

2600,and 2600320.

Jackfields, 2 & 4-Wire TTPC

Connectorized Jackfields.

SPECIFYING NOTES: Each kit fits both sides of a jack panel (Standard

height 1.75". Also available in 3.5 inch and 5.25 inch heights.

Prefix letter“D” indicates panels have been predrilled countersunk holes to

facilitate mounting X-Wide strips. Series 1200, 1400, & 2600 can be predrilled

on special order.

Assembly sequence

of DS323 X-Wide

Designation Strip

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

JACK PANELS

®

-

238 ^{X WIDE VERTICAL DESIGNATION STRIPS}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

X-WIDE^®VERTICAL DESIGNATION STRIPS

DS351

DS353

X-WIDE VERTICAL DESIGNATION STRIPS

Part No.

DS321

Description

For Panels

Kit (.75 x 1.75 inches) includes:

2-mounting brackets

2-marking strips

2-covers

4-mounting screws, nuts and

lockwashers

1600, A1600

1700, B1700

TT51 thu TT54,

TT59 thru TT62,

2- & 4-Wire

TTConnectorized

Jackfields, 2-, 4-

& 6-Wire TTPC

Conntectorized

Jackfields

DS322

DS323

DS350

DS351

Kit (.75 x 3.5 inches) includes:

2-mounting brackets

2-marking strips

2-covers

8-mounting screws, nuts and

lockwashers

Kit (.75 x 5.25 inches) includes:

2-mounting brackets

2-marking strips

2-covers

12-mounting screws, nuts and

lockwashers

Kit (.75 x 2.265 inches) includes: B1600, C1600

2-mounting brackets

2-marking strips

2-covers

4-mounting screws, nuts and

lockwashers

Kit (.75 x 1.75 inches) includes:

1-marking strip

1-cover

(Used on all 1.75 inch height

connectorized jackfields

except next to hinge)

Kit same as DS351except

narrow width. To be used next

to hinge.

Same as DS321

(Mounted in

pairs)

6-Wire TT-

Connectorized

and panels for

DS321

ORDERING

1. Order by part number from table.

2. To order X-Wide^®strips installed on panels,

contact Switchcraft.

2-, 4- & 6-Wire

Connectorized

Jackfields, TTPC

Connectorized

Jackfields

DS352

DS353

Same as DS351

Kit (.75 x 5.25 inches) includes:

1-marking strip

1-cover

6-Wire TT-

Connectorized

Jackfields

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

PATCH CORDS & MOLDED CABLE ASSEMBLIES

^{MOLDED CABLE ASSEMBLIES}239

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

DESIGN MATERIALS AND FEATURES

Molded cable assemblies offer many advantages over

conventionally-fabricated cables:

WIRE AND CABLE

Switchcraft provides over 100 types of wire and cable from

which molded cable assemblies are manufactured. Basically,

30 different cables are used for standard tooling. There are no

additional charges where standard tooling exists.

• Improved wiring strain relief.

• Proper match of cable diameter to handle.

• Sealed junction: Less exposed area; less contamination

due to moisture, dust, dirt.

• Lower weight and smaller size.

• 100% shielding on selected types.

• Color to match/complement equipment decor.

• Legends, color codes, ribs, dot, customer logo/indicia

can be added.

• All molded cables are 100% tested for continuity, shorts

and voltage breakdown (250 or 500V).

• All Switchcraft^®molded assemblies are UL recognized.

Tooling is designed so cable entry openings on molded plastic

handles fit tightly to the outside diameter of the cable. The

tighter fit holds cable secure and is more resistant to abuse

than if a larger opening were used.

DESIGN AND FABRICATING TECHNIQUES

Switchcraft’s engineering staff is supported by a complete tool

and die making facility, as well as a fully equipped and staffed

molding department to fill all of Switchcraft’s plastic molding

requirements.

OEM COST SAVINGS

The molding department uses injection molders of

semi-automatic, multiple-cavity type to obtain high production

rates.

Molded cable assemblies generally cost less than your

in-house conventionally-fabricated assemblies. Specific

advantages are elimination of:

1.Your evaluation, ordering, incoming inspection, and

stocking of individual parts.

2.Your plant/equipment needs for in-house fabrication.

3. Your tooling/labor costs

MANUFACTURING SEQUENCE (EXAMPLE)

Step 1: The 1-piece tip rod is firmly staked into the phone plug

finger assembly, making a complete and mechanically secure

assembly. (Refer to Figure 1) The staking process, using precision

manufactured parts, keeps the tip rod assembly from working

loose and causing mechanical and electrical problems later.

4. Your production line QA/QC.

MOLDED CABLE RELIABILITY

In a series of OEM-conducted tests of Switchcraft versus

non-molded, fabricated cables, Switchcraft cables were shown

to be superior.

Step 2: Cable center conductor is soldered to tip rod; then the

tubular bridge sleeve is slid forward, bringing the cable shield in

contact with the circular notch around rear of tip rod assembly.

1. Fabricated cables broke at lower pull forces: OEM types – 24

to 34 pounds, molded cables – 37.5 to 41 pounds

(molded cables did not break at terminations; the cable itself

broke about one to two feet back from the connector).

2. Fabricated cables suffered broken wires at low pull-out force

limits. Molded cables had cable breaks before cable pulled

out of the handle, in most instances. And this failure

occurred, as previously noted, at higher pull-out forces.

Strengthened molded cable assemblies out-performed

fabricated assemblies, and in fact, the crimp molding process

makes it stronger than the wire itself.

Step 3: Bridge sleeve is crimped tightly to tip rod assembly and

cable. Center conductor is completely isolated from potential

pulling strains, and shield makes a firm, low resistance

connection with plug sleeve.

Step 4: A dimensionally stable plastic handle/body of the

proper color, size and shape is molded into place. Features are

depressions for finger grip, cable entry opening customized to

cable diameter to minimize wear on cable, and handle/body

molded in one place.

From start to finish, Switchcraft’s molded cables are designed

and built with maximum quality and reliability. There is virtually

no limit to the type and characteristics of special molded cables

that Switchcraft can build to special order. For all special

orders, consult Switchcraft.

SPECIAL ORDER ITEMS

• Customer Iogo

• Panel Relief Bushing. Specify panel thickness and exact

point on cable where bushing is to be installed. Standard

panel opening is .50" (12.7 mm) diameter. Double

flatted in panels up to .125" (3.18 mm) thick.

• Molded Cable Clamp Bands or Y-Junctions.

(Refer to page 258.)

FIGURE 1: MOLDED CABLE MANUFACTURING STEPS

FOR 1/4" LITTEL PLUG^®

• Special Termination (see separate chart). Contact

Switchcraft for specials and provide complete details.

1. One Pc. Tip Rod

Assembly

2. Center

Conductor

Termination

Bridge

Sleeve

TYPES OF PLASTICS

Thermoplastics used for molded cable assemblies, have

excellent electrical and mechanical properties, are economical,

convenient for molding, and can be provided in an array of

colors. They have electrical characteristics far higher than

required, and provide dimensional stability, abrasion and

abuse resistance, and can be molded with a smooth mirror-like

finish or matte or semi-matte finishes.

3. Crimped Bridge Sleeve

4. Complete

Body/Handle

Molded in Place

Cable Entry Opening - Custom

Selected to fit Cable Used

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630

PATCH CORDS & MOLDED CABLE ASSEMBLIES

240 ^{3.5MM MOLDED CABLE ASSEMBLIES}

-

PHONE: 773 792 2700

* Please visit the product pages on our website for the most up-to-date product information

3.5MM MOLDED CABLES

35HRXXX35

36HRXXX36

35HRXXX84

SPECIFICATIONS

PLUGS

Tip, Ring and Sleeve: Brass with nickel-plate

Flex Life: 5000 cycles minimum

Plug Insulator: ACETAL

FEATURES AND BENEFITS

• Choose plug-to-plug or plug-to-stripped and tinned leads

• 3.5 mm plugs available as straight or right-angle

• Available in mono and stereo

• NOM.29 GA jacketed conductors (red and white)

with copper spiral shield

• Cable O.D. 3.0 mm nom./.118" nom.

• Black cable

PART NUMBERING SYSTEM

ORDERING INFORMATION

1. Order by part number.

2. Contact Switchcraft for custom requirements.

32 - Mono

33 - RA Mono

35 - Stereo

H - Black R - 3.0 mm nom.

2-conductor wire

with spiral copper

shield

Length (feet)

036 (3)

072 (6)

32 - Mono

33 - RA Mono

35 - Stereo

36 - RA Stereo

84 - Stripped

and tinned

36 - RA Stereo

144 (12)

90 - Straight

Cut Off

END CODE: 35

END CODE: 36

END CODE: 84

3.5 mm STRAIGHT PLUG

3.5 mm RIGHT-ANGLE PLUG

STRIP and TIN

Inch

DIMENSIONS ARE FOR REFERENCE ONLY

(mm)

® Registered trademark of Switchcraft, Inc.

Note: Contact your Switchcraft Representative for price and delivery

w w w . s w i t c h c r a f t . c o m

PATCH CORDS & MOLDED CABLE ASSEMBLIES

POWER PLUGS AND JACKS

241

-

FAX: 773 792 2129

* Please visit the product pages on our website for the most up-to-date product information

MOLDED CABLE ASSEMBLIES

With Power-Plug Battery Charger Plugs and Jacks

ST760, ST765 – Termination Code: 47, 48

SPECIFICATIONS

PLUG

Sleeve: Copper alloy, nickel-plated.

Pin: Silver-plated copper alloy.

Finger Insulator: Plastic.

Insulating Washers: Rigid plastic.

Sleeve Terminal: Steel, tin-plated.

Molded Handle: Plastic.

JACK

.080-.084 DIA x .328 DEEP

(2.03-2.13) DIA x (8.33) DEEP

ST-760

ST-765

Bushing: Brass, nickel-plated copper alloy.

Washers: Rigid plastic.

.099-.103 DIA x .328 DEEP

(2.52-2.61) DIA x (8.33) DEEP

Pin, Springs, and Terminals: Plated copper alloy.

Housings: Thermoplastic.

NOTE: ST760 is a molded version of S760; ST765 is a molded version of 765.

CABLE

RA760, RA765 – Termination Code: 52, 53

We will build assemblies on cable furnished by you,

.156" (3.96 mm) outside diameter, or on cable we purchase to

your specifications. Jacket must have temperature rating of

60° C minimum. Optional mold available for larger cable; order

as ST760L or ST765L.

DESIGN FEATURES

• ST760, ST760L, RA760 – accepts .08" (2.03 mm)

diameter pin.

• ST765, ST765L, RA765 – accepts .099" (2.54 mm)

diameter pin.

• RA712A:

• Mates with ST765, ST765L, and RA765.

• 2 conductor.

• Mounts in .313" diameter hole in panels up to .125" thick.

• Pin outside diameter is .108" - .112" split pin.

• Automatic switchover from AC to DC.

• RA722A:

• Mates with ST760, ST760L, and RA760.

• Pin outside diameter is .086" - .090" split pin.

• Molded-in cable clamp sleeve terminal (RA plugs only).

• For use with sockets similar to those used on portable

radios, tape recorders, television receivers and appliances

which feature AC adapters and/or battery chargers.

• Available with terminations of another ST760, RA760

stripped and tinned ends, spade lugs, alligator clips, and


型号：	VMP4PX
厂家：	ETC
描述：	PATCHCORD VIDEO MIDSIZE 4' PUR
文件：	总333页 (文件大小：18125K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VMP4PX [ETC]

相关型号：

VMP4RX

VMP4YX

VMP5BK

VMP5BKX

VMP5BL

VMP5BLX

VMP5GN

VMP5GNX

VMP5GYX

VMP5OX

VMP5PX

VMP5RX