3GV8B-150T-200.00 [EUROQUARTZ]

LVCMOS Output Clock Oscillator, 200MHz Nom, ROHS COMPLIANT, DIP-8/4;


型号：	3GV8B-150T-200.00
厂家：	EUROQUARTZ LIMITED
描述：	LVCMOS Output Clock Oscillator, 200MHz Nom, ROHS COMPLIANT, DIP-8/4
文件：	总1页 (文件大小：125K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

QUARTZ

EURO

GV8 VCXO

8 pin Dual-in-Line VCXO

50.01MHz ~ 200.0MHz

Frequency range 50.01MHz to 200MHz

LVCMOS Output

Supply Voltage 3.3 VDC

High Q fundamental mode crystal

Low jitter multiplier circuit

Low unit cost

DESCRIPTION

GV8 VCXOs, are packaged in an industry-standard, 8 pin Dual in Line

package. The VCXO incorporates a high Q fundamental mode crystal

and a low jitter multiplier circuit.

SPECIFICATION

Frequency Range:

Supply Voltage:

50.01MHz to 200.0MHz

3.3 VDC ±5%

Output Logic:

LVCMOS

Integrated Phase Jitter:

2.3ps typical, 4.0ps maximum

(for 155.250MHz)

Period Jitter RMS:

Period Jitter Peak to peak:

Phase Noise:

4.0ps typical (for 155.250MHz)

27.0ps typical (for 155.250MHz)

Initial Frequency Accuracy:

Tune to the nominal frequency

with Vc= 1.65 ±0.2VDC

90% Vdd minimum

10% Vdd maximum

From ±30ppm to ±150ppm

Output Voltage HIGH (1):

Output Voltage LOW (0):

Pulling Range:

Temperature Stability:

Output Load:

15pF

Start-up Time:

Duty Cycle:

Rise/Fall Times:

Current Consumption:

Linearity:

Modulation Bandwidth:

Input Impedance:

Slope Polarity:

10ms maximum, 5ms typical

50% ±5% measured at 50% Vdd

1.2ns typical (15pF load)

25mA maximum (15pF load)

10% maximum, 6% typical

25kHz minimum

PHASE NOISE

2 MW minimum

Monotonic and Positive. (

Offset

Frequency 155.25MHz

(Transfer function)

10Hz

100Hz

1kHz

10kHz

100kHz

1MHz

10MHz

-65dBc/Hz

-95dBc/Hz

-120dBc/Hz

-128dBc/Hz

-122dBc/Hz

-120dBc/Hz

-140dBc/Hz

Storage Temperature:

Ageing:

Enable/Disable (Tristate):

RoHS Status:

-50° to +100°C

±5ppm per year maximum

Not available (

Fully compliant

)

PART NUMBER SCHEDULE

Example: 3GV8B-80N-155.25

FREQUENCY STABILITY

Supply Voltage

3 = +3.3V

Temp. Range

Stability Code Stability ±ppm

Series Designator

100

0°~+70°C

-40°~+85°C

GV8

Stability over temperature range

(

)

Pullability in ±ppm

Pullability determinator

N = minimum

100

If non-standard frequency stability is required

Use ‘I’ followed by stability, i.e. I20 for ±20ppm

M = maximum

T = Typical

Frequency in MHz

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE

Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk

相关型号：