93-22SURSYGC/S530-A2/TR8 [EVERLIGHT]
High performance SMD LED with Reflector; 高性能SMD LED与反射型号: | 93-22SURSYGC/S530-A2/TR8 |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | High performance SMD LED with Reflector |
文件: | 总11页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High performance SMD LED with Reflector
93-22SURSYGC/S530-A2/TR8
Features
z
z
z
Package in 12mm tape on 7” diameter reels.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder
process.
z
z
z
z
EIA std. package.
IC compatible.
Pb-free.
The product itself will remain within RoHS compliant
version.
Applications
z
Automotive: backlighting in dashboard and switch.
z
Telecommunication: indicator and backlighting in
telephone and fax.
z
z
z
z
z
z
Indicator and backlight for audio and video equipment.
Indicator and backlight for battery driven equipment.
Small indicator for outdoor applications.
Indicator and backlight in office equipment.
Flat backlight for LED, switches and symbol.
General use.
Device Selection Guide
Chip
Lens Color
Type
SUR
SYG
Material
Emitted Color
Brilliant Red
AlGaInP
AlGaInP
Water Clear
Brilliant Yellow Green
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 1 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Package Dimensions
SUR
SYG
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 2 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Absolute Maximum Ratings @Ta=25℃
Parameter
Symbol
Rating
5
Unit
V
Reverse Voltage
VR
SUR
Forward Current
IF
25
mA
SYG
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
-40~ +100
℃
℃
Electrostatic
ESD
2000
60
V
Discharge(HBM)
SUR
SYG
SUR
SYG
Power Dissipation
Pd
mW
mA
Peak Forward Current (Duty
1/10 @ 1KHz)
IFP
60
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 3 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Electro-Optical Characteristics @ Ta=25℃
Parameter
Symbol
Min.
17
Typ.
41
Max.
-----
-----
Unit
mcd
Condition
IF=20mA
SUR
SYG
Luminous Intensity
IV
11
17
Viewing Angle
2θ1/2
-----
-----
130
632
-----
-----
deg
nm
IF=20mA
IF=20mA
SUR
Peak Wavelength
λp
SYG
SUR
SYG
SUR
SYG
SUR
SYG
-----
-----
-----
-----
-----
-----
-----
575
624
573
20
-----
-----
-----
-----
-----
2.4
nm
nm
Dominant Wavelength λd
IF=20mA
IF=20mA
Spectrum Radiation
△λ
Bandwidth
20
2.0
2.0
Forward Voltage
Reverse Current
VF
V
IF=20mA
VR=5V
2.4
IR
-----
-----
10
μA
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 4 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Typical Electro-Optical Characteristics Curves(SUR)
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 5 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Typical Electro-Optical Characteristics Curves(SYG)
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 6 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 7 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel
Note: Tolerances Unless Dimension ±0.1mm Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 8 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Reflow Soldering
22 PCS. 0/1
22 PCS. 0/1
6 Min.
Min. 5 sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
1000 Hrs.
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Temp. : 100℃
Low Temperature
Storage
Temp. : -40℃
IF = 20 mA / 25℃
85℃/85%RH
5
6
7
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
1000 Hrs.
1000 Hrs.
1000 Hrs.
DC Operating Life
High Temperature /
High Humidity
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 9 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
prepared date: 21-Sep-2005
Rev. 2
Page: 10 of 11
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-22SURSYGC/S530-A2/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-932-027
http://www.everlight.com
Rev. 2
Page: 11 of 11
prepared date: 21-Sep-2005
Prepared by: Ray Yuan
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明