93-23/R6SGHB7C-A02/2T [EVERLIGHT]
Luminosity Full Color LED; 亮度全彩LED型号: | 93-23/R6SGHB7C-A02/2T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Luminosity Full Color LED |
文件: | 总12页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet (Preliminary)
Luminosity Full Color LED
93-23/R6SGHB7C-A02/2T
Features
․Super-luminosity chip LED.
․White SMT package.
․Built in Red, Green, and Blue chips.
․Lead frame package with individual 6 pins.
․Wide viewing angle.
․Soldering methods: IR reflow soldering.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․Due to the package design, 93-23 has low power
consumption and adjusting each color is possible
thanks to serial connection by 6 terminal
connection (Individual driving by each terminal)
in case of using several number of LED. And
makes it ideal for light pipe application.
Applications
․Amusement equipment.
․Information boards.
․Flashlight for digital camera of cellular phone.
Device Selection Guide
Chip
Lens Color
Type
R6S
GH
Material
AlGaInP
InGaN
Emitted Color
Brilliant Red
Brilliant Green
Blue
Water Clear
B7
InGaN
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 1 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Package Outline Dimensions
3.5
1
3
5
1
3
5
R
G
B
2
4
6
2
4
6
Cathode Mark
3.5
2.7
2.95
3.0
0.3
0.8
3.5
0.5
Notes: 1.All dimensions are in millimeters.
2.Tolerances unspecified are ±0.1mm.
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 2 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
5
Unit
V
Reverse Voltage
VR
R6S
GH
B7
50
25
Forward Current
Peak Forward Current (Duty 1/10 @ 1KHZ)
Power Dissipation
IF
IFP
mA
mA
mW
V
30
R6S
GH
B7
100
100
100
120
110
110
2000
150
150
R6S
GH
B7
Pd
R6S
GH
B7
Electrostatic Discharge(HBM)
ESD
℃
℃
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
-40~ +90
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 3 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
R6S
Min.
180
Typ.
265
Max.
-----
Unit
mcd
deg
nm
Condition
IF=20mA
Luminous Intensity
Viewing Angle
Peak Wavelength
Iv
GH
B7
715
140
1010
240
-----
-----
IF=20mA
IF=20mA
2θ1/2
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
120
632
518
468
624
525
470
20
IF=20mA
-----
-----
R6S
GH
B7
λp
λd
IF=20mA
-----
-----
-----
-----
-----
-----
-----
-----
2.4
R6S
GH
B7
Dominant
Wavelength
nm
IF=20mA
R6S
GH
B7
Spectrum Radiation
Bandwidth
35
△λ
nm
V
IF=20mA
IF=20mA
35
2.0
R6S
GH
B7
Forward Voltage
Reverse Current
3.3
3.7
VF
3.3
3.7
-----
-----
-----
10
R6S
GH
B7
μA
IR
VR=5V
50
50
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 4 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Typical Electro-Optical Characteristics Curves (Red)
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 5 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Typical Electro-Optical Characteristics Curves (Green)
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 6 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Typical Electro-Optical Characteristics Curves (Blue)
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 7 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 8 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is ±0.1mm Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 9 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Reflow Soldering
22 PCS. 0/1
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
3
4
5
6
7
Temperature Cycle
Thermal Shock
22 PCS. 0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
1000 Hrs.
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Temp. : 100℃
Temp. : -40℃
1000 Hrs.
1000 Hrs.
Low Temperature
Storage
DC Operating Life
IF = 20 mA
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 10 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260 °C Max
10 Sec. Max.
Pre-heating
180~200°C
1~5 °C / Sec.
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 11 of 12
Prepared by: Ya_Hui Fang
EVERLIGHT ELECTRONICS CO.,LTD.
93-23/R6SGHB7C-A02/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and
do soldering of each terminal. Be careful because the damage of the product is often started at the
time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No.:
http://www.everlight.com
Prepared date: 5-Sep-2006
Rev. 1
Page: 12 of 12
Prepared by: Ya_Hui Fang
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明