GHC-YR1S1 [EVERLIGHT]
Chip LED (1.1 mm Height); 贴片LED （1.1 mm高度）
| 型号： | GHC-YR1S1 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Chip LED (1.1 mm Height) |
| 文件： | 总10页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LED (1.1 mm Height)
15-21/GHC-YR1S1/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant
version.
Descriptions
․The 15-21 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
PART No.
Lens Color
Material
Emitted Color
15-21/GHC-YR1S1/2T
InGaN
Brilliant Green
Water Clear
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 1 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 2 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
5
Unit
Reverse Voltage
V
mA
℃
Forward Current
IF
25
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
-40~ +90
260
℃
Soldering Temperature
Tsol
℃
(for 5 second)
150
Electrostatic Discharge
Power Dissipation
ESD
Pd
V
110
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
100
mA
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Iv
Min.
112
-----
-----
Typ.
Max.
225
Unit Condition
Luminous Intensity
Viewing Angle
-----
140
518
mcd
deg
nm
2θ1/2
λp
-----
-----
Peak Wavelength
Dominant Wavelength
IF=20mA
nm
λd
520
-----
35
535
Spectrum Radiation
Bandwidth
△λ
VF
-----
-----
nm
V
Forward Voltage
Reverse Current
-----
-----
3.5
3.7
50
VR=5V
IR
-----
μA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 3 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Bin Range Of Dom. Wavelength
Group
Bin
Min
Max
Unit
nm
Condition
X
Y
Z
520
525
530
525
530
535
Y
IF=20mA
Bin Range Of Luminous Intensity
Bin
R1
R2
S1
Min
112
140
180
Max
Unit
mcd
Condition
IF=20mA
140
180
225
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 4 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Typical Electro-Optical Characteristics
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 5 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 6 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 7 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Reflow Soldering
22 Pcs. 0/1
22 PCS. 0/1
6 Min.
5 sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
1000 Hrs.
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Temp. : 100℃
Low Temperature
Storage
Temp. : -40℃
IF = 20 mA
5
6
7
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
1000 Hrs.
1000 Hrs.
1000 Hrs.
DC Operating Life
High Temperature /
High Humidity
85℃/85% RH
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 8 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 9 of 10
Prepared by: Aihua hong
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/GHC-YR1S1/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No: SZDSE-151-G01
http://www.everlight.com
Prepared date: 07-27-2005
Rev
3
Page: 10 of 10
Prepared by: Aihua hong
相关型号：
©2020 ICPDF网 联系我们和版权申明