H11L3S(TA).(TB)-V [EVERLIGHT]

6 PIN DIP PHOTO COUPLER; 6引脚DIP光电耦合器
H11L3S(TA).(TB)-V
型号: H11L3S(TA).(TB)-V
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

6 PIN DIP PHOTO COUPLER
6引脚DIP光电耦合器

光电
文件: 总11页 (文件大小:276K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Features:  
High data rate, 1MHz typical (NRZ)  
Free from latch up and oscilliation throughout voltage and  
temperature ranges.  
Microprocessor compatible drive  
Logic compatible output sinks 16mA at 0.4V maximum  
Guaranteed on/off threshold hysteresis  
Wide supply voltage capability, compatible with all popular logic  
systems  
High isolation voltage between input and output (Viso=5000 V rms )  
Compact dual-in-line package  
Pb free and RoHS compliant.  
UL approved (No. E214129)  
VDE approval (No.132249 )  
SEMKO approved  
NEMKO approved  
DEMKO approved  
FIMKO approved  
CSA approved (No. 2007798)  
Description  
Schematic  
The H11LX series of devices each consist of a GaAs infrared  
emitting diode optically coupled a high speed integrated circuit  
detector. The output detector incorporates a Schmitt trigger, which  
provides hysteresis for noise immunity and pulse shaping.  
The devices are in a 6-pin DIP package and available in  
wide-lead spacing and SMD option.  
Applications  
1. Anode  
z Logic to logic isolator  
2. Cathode  
z Programmable current level sensor  
3. No Connection  
4. VO  
5. GND  
6. VCC  
z Line receiver eliminate noise and transient problems  
z AC to TTL conversion square wave shaping  
z Digital programming of power supplies  
z Interfaces computers with peripherals  
Truth Table  
Input  
Output  
H
L
L
H
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
1
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Absolute Maximum Ratings (Ta=25°C)  
Parameter  
Symbol  
IF  
Rating  
60  
Unit  
mA  
V
Forward current  
Input  
VR  
Reverse voltage  
6
mW  
V
PD  
Power dissipation  
V45 Allowed Range  
120  
Vo  
0 to 16  
3 to 16  
50  
V
V65 Allowed Range  
VCC  
I0  
Output  
mA  
mW  
Output Current  
power dissipation  
Total power dissipation  
Isolation voltage *1  
PD  
150  
Ptot  
Viso  
Topr  
Tstg  
Tsol  
250  
mW  
V rms  
°C  
5000  
-55~+100  
-55~+150  
260  
Operating temperature  
Storage temperature  
°C  
Soldering temperature *2  
°C  
Notes  
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6  
are shorted together.  
*2 For 10 seconds.  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
2
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Electrical Characteristics (Ta=25°C unless specified otherwise)  
Input  
Parameter  
Symbol  
Min.  
Typ.*  
Max.  
Unit  
Condition  
IF = 10mA  
Forward voltage  
-
-
-
1.15  
1.5  
10  
V
VF  
IR  
Reverse Leakage current  
Capacitance  
-
-
µA  
pF  
VR = 5V  
100  
V=0, f=1MHz  
CJ  
Output  
Parameter  
Symbol  
VCC  
Min.  
Typ.*  
Max.  
15  
5
Unit  
V
Condition  
Operation Voltage Range  
Supply Current  
3
-
1.6  
-
-
-
mA  
µA  
Ω
ICC(off)  
IOH  
IF=0mA, Vcc=5V  
IF=0mA, Vcc=Vo=15V  
VI-O=500VDC  
Output Current, High  
Isolation Resistance  
100  
-
1011  
-
RISO  
Transfer Characteristics  
Parameter  
Symbol  
ICC(on)  
Min.  
-
Typ.*  
1.6  
Max.  
5
Unit  
mA  
Condition  
Supply Current  
IF=10mA, Vcc=5V  
Vcc=5V, IF=IFon(max.),  
Output Voltage .low  
-
-
-
0.4  
1.6  
VOL  
V
RL=270Ω  
H11L1  
-
Turn on Threshold  
Current 1  
H11L2  
Vcc=5V, RL=270Ω  
10  
5
IFon  
mA  
mA  
-
-
-
-
H11L3  
Vcc=5V, RL=270Ω  
Vcc=5V, RL=270Ω  
Turn off Threshold Current  
-
1
-
IFoff  
Hysteresis Ratio  
Turn on Time  
Fall Time  
0.5  
-
-
0.9  
4
-
I
Fon/IFoff  
-
-
-
-
-
μS  
μS  
μS  
μS  
MHz  
ton  
tr  
toff  
tr  
0.1  
-
Vcc=5V, IF=IFon, RL=270Ω  
Turn off Time  
Rise Time  
4
-
0.1  
1
Data Rate  
-
* Typical values at Ta = 25°C  
1. Max. IF(ON) is the maximum current required to trigger the output. For examples, a 1.6mA maximum trigger  
current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on.  
A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum  
allowable LED drive current is 60mA.  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
3
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Typical Performance Curves  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
4
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Figure. 7 Switching test circuit and waveform  
Order Information  
Part Number  
H11LXY(Z)-V  
Note  
X
Y
Z
V
= Part No. for 1, 2 or 3  
= Lead form option (S, S1, M or none)  
= Tape and reel option (TA, TB or none).  
= VDE (optional)  
Option  
None  
Description  
Packing quantity  
Standard DIP-6  
65 units per tube  
65 units per tube  
1000 units per reel  
1000 units per reel  
1000 units per reel  
1000 units per reel  
M
Wide lead bend (0.4 inch spacing)  
S + TA  
S + TB  
S1 + TA  
S1 + TB  
Surface mount lead form + TA tape & reel option  
Surface mount lead form + TB tape & reel option  
Surface mount lead form (low profile) + TA tape & reel option  
Surface mount lead form (low profile) + TB tape & reel option  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
5
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Package Drawings  
(Dimensions in mm)  
Standard DIP Type  
Option M Type  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
6
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Option S Type  
Option S1 Type  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
7
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Recommended pad layout for surface mount leadform  
Device Marking  
EL  
H11L3  
YWWV  
Notes  
EL  
denotes Everlight  
H11L3  
Y
WW  
V
denotes Device Number  
denotes 1 digit Year code  
denotes 2 digit Week code  
denotes VDE (optional)  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
8
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Tape & Reel Packing Specifications  
Option TA  
Option TB  
Direction of feed from reel  
Direction of feed from reel  
Tape dimensions  
Dimension No.  
A
B
Do  
D1  
E
F
10.4±0.1  
7.52±0.1  
1.5±0.1  
1.5+0.1/-0  
1.75±0.1  
7.5±0.1  
Dimension (mm)  
Po  
P1  
P2  
t
W
K
Dimension No.  
4.0±0.15  
1.6±0.1  
2.0±0.1  
0.35±0.03  
16.0±0.2  
4.5±0.1  
Dimension (mm)  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
9
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
Solder Reflow Temperature Profile  
Temperature  
260 °C (peak)  
>255 °C (30s Max)  
217°C  
1-3 °C/Sec Max  
200°C  
60 – 140 Sec  
150°C  
70 – 170 Sec  
1-3 °C/Sec Max  
TIME (S)  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
10  
http://www.everlight.com  
January 7, 2009  
Rev. 1  
6 PIN DIP PHOTO COUPLER  
Schmitt Trigger  
H11Lx Series  
DISCLAIMER  
1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority  
on material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for use as  
outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of the  
product which does not comply with the absolute maximum ratings and the instructions included in this  
datasheet.  
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in  
any form is prohibited without the specific consent of EVERLIGHT.  
Everlight Electronics Co., Ltd.  
Document NoDPC-0000022  
11  
http://www.everlight.com  
January 7, 2009  
Rev. 1  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY