S2C-FM2P1VY [EVERLIGHT]
Chip LED (0.4mm Height); 贴片LED (0.4mm间距高)型号: | S2C-FM2P1VY |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | Chip LED (0.4mm Height) |
文件: | 总10页 (文件大小:170K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.4mm Height)
19-217/S2C-FM2P1VY/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 19-217 SMD Taping is much smaller than
lead frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Material
Lens Color
Emitted Color
19-217/S2C-FM2P1VY/3T
AlGaInP
Brilliant Orange
Water Clear
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 1 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 2 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
Rating
Unit
VR
5
25
V
mA
℃
Forward Current
IF
Operating Temperature
Storage Temperature
Electrostatic Discharge(HBM)
Power Dissipation
Topr
Tstg
ESD
Pd
-40 ~ +85
-40 ~ +90
2000
℃
V
60
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol Min.
Typ. Max. Unit Condition
Luminous Intensity
Peak Wavelength
mcd
nm
Iv
22.5
----
-----
611
57.0
----
λp
Dominant Wavelength
603.0
----
605.0
17
609.0
----
λd
nm
Spectrum Radiation
Bandwidth
IF=5mA
△λ
nm
Viewing Angle
Forward Voltage
Reverse Current
2θ1/2
----
120
----
deg
VF
V
1.70
----
----
----
2.20
10
VR=5V
IR
μA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Prepared date: 16-Nov-2006
Rev. 1.1
Page: 3 of 10
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Bin Range Of Dom. Wavelength
Group
Bin
EE1
EE2
Min
603.0
606.0
Max
606.0
609.0
Unit
nm
Condition
=5mA
F
IF
Bin Range Of Luminous Intensity
Bin
M2
Min
22.5
Max
Unit
mcd
Condition
28.5
36.0
45.0
57.0
N1
N2
P1
28.5
36.0
45.0
IF=5mA
Bin Range Of Forward Voltage
Group
Bin
19
20
21
22
23
Min
1.70
1.80
1.90
2.00
2.10
Max
Unit
V
Condition
1.80
1.90
2.00
2.10
2.20
V
IF=5mA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 4 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 5 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 6 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Prepared date: 16-Nov-2006
Rev. 1.1
Page: 7 of 10
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Hours/Cycles
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
Low Temperature
Storage
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 8 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Rev. 1.1
Page: 9 of 10
Prepared date: 16-Nov-2006
Prepared by: Ashley Kuo
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/S2C-FM2P1VY/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-197-
http://www.everlight.com
Prepared date: 16-Nov-2006
Rev. 1.1
Page: 10 of 10
Prepared by: Ashley Kuo
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明