Y2C-AP2R2L [EVERLIGHT]
Technical Data Sheet Top View LEDs; 技术数据表顶视图的LED![Y2C-AP2R2L](http://pdffile.icpdf.com/pdf1/p00198/img/icpdf/Y2C-AP_1119334_icpdf.jpg)
型号: | Y2C-AP2R2L |
厂家: | ![]() |
描述: | Technical Data Sheet Top View LEDs |
文件: | 总10页 (文件大小:242K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
Top View LEDs
67-21/Y2C-AP2R2L/2T
Features
․P-LCC-2 package.
․White package.
․Optical indicator.
․Colorless clear window.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow
and wave solder processes.
․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS
compliant version
Descriptions
․The 67-21 series is available in soft orange, green, blue and
yellow. Due to the package design, the LED has wide
viewing angle and optimized light coupling by inter reflector.
This feature makes ideal for light pipe application. The low
current requirement makes this device ideal for portable
equipment or any other application where power is at a
premium.
Applications
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Emitted Color
Material
Resin Color
AlGaInP
Brilliant Yellow
Water Clear
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 1 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Package Dimensions
Note: The tolerances unless mentioned is ± 0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 2 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
VR
Rating
5
Unit
V
Reverse Voltage
Forward Current
IF
25
mA
mA
mW
V
Peak Forward Current (Duty 1/10 @1KHz)
Power Dissipation
IFP
60
Pd
60
Electrostatic Discharge(HBM)
Operating Temperature
ESD
Topr
Tstg
Tsol
2000
-40 ~ +85
-40 ~+90
℃
Storage Temperature
℃
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Viewing Angle
Symbol
Min.
Typ.
-----
120
591
-----
15
Max.
180
Unit
mcd
deg
nm
nm
nm
V
Condition
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V
Iv
57
2θ1/2
λp
-----
-----
585.5
-----
1.70
-----
-----
-----
594.5
-----
2.30
10
Peak Wavelength
Dominant Wavelength
Spectrum Radiation Bandwidth
Forward Voltage
λd
△λ
VF
-----
-----
Reverse Current
IR
μA
Notes:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3. Tolerance of Forward Voltage: ±0.1
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Prepared date: 20-Nov-2007
Rev. 1
Page: 3 of 10
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Bin Range of Luminous Intensity
Bin
Min.
Max.
Unit
Condition
P2
Q1
Q2
R1
R2
57.0
72.0
72.0
90.0
mcd
IF=20mA
90.0
112.0
140.0
180.0
112.0
140.0
Bin Range of Dominant Wavelength
Group
Bin Code
Min.
585.5
588.5
591.5
Max.
588.5
591.5
594.5
Unit
Condition
D3
A
nm
IF=20mA
D4
D5
Bin Range of Forward Voltage
Group
Bin
19
20
21
22
23
24
Min.
1.70
1.80
1.90
2.00
2.10
2.20
Max.
1.80
1.90
2.00
2.10
2.20
2.30
Unit
Condition
L
V
IF=20mA
Notes:
1. Tolerance of Luminous Intensity: ±11%
2. Tolerance of Dominant Wavelength: ±1nm
3. Tolerance of Forward Voltage: ±0.1V
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Prepared date: 20-Nov-2007
Rev. 1
Page: 4 of 10
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Typical Electro-Optical Characteristics Curves
Forward Current vs.
Forward Voltage
Ta=25°C
Spectrum Distribution
Ta=25°C
100
50
40
30
75
50
25
20
10
0
500
0
1.6 1.8 2.0
2.2 2.4 2.6
550
600
650
700
Wavelength λ (nm)
Forward Voltage V (V)
F
Relative Luminous Intensity vs.
Relative Luminous Intensity vs.
Ambient Temperature
Forward Current
Ta=25°C
1000
100
10
1000
f=1KHz
Duty=1/1
0
100
10
1
1
3
10
2
0
1
-60 -40 -20
0
20 40
80 100
60
10
10
10
Forward Current I (mA)
Ambient Temperature T (°C)
a
F
Radiation Diagram
0° 10° 20°
Ta=25°C
Forward Current Derating Curve
50
40
30
20
10
0
30°
40°
50°
1.0
0.9
0.8
60°
70°
0.7
80°
90°
0.5 0.3 0.1 0.2 0.4 0.6
0
20
Ambient Temperature T (°C)
40
60
80
100
a
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 5 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Label Explanation
Pb
EVERLIGHT
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
CPN :
P
N : XXXXXXXXXXXXX
RoHS
XXXXXXXXXXXXX
QTY : XXX
CAT : XXX
HUE : XXX
REF : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 6 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel.
Note: The tolerances unless mentioned is ±0.1mm Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Prepared date: 20-Nov-2007
Rev. 1
Page: 7 of 10
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
6 Min.
22 PCS
22 PCS.
22 PCS.
22 PCS.
22 PCS.
22 PCS.
22 PCS.
Min. 5 sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
2
Temperature Cycle
Thermal Shock
300 Cycles
300 Cycles
1000 Hrs.
1000 Hrs.
1000 Hrs.
1000 Hrs.
0/1
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
3
0/1
Temp. : 100℃
Temp. : -40℃
4
High Temperature Storage
Low Temperature Storage
DC Operating Life
0/1
5
0/1
IF = 20 mA / 25℃
85℃/85%RH
6
0/1
High Temperature / High
Humidity
7
0/1
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 8 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
Pre-heating
180~200°C
1~5 °C / Sec.
60 Sec. Max.
Above 220°C
120 Sec. Max.
.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Rev. 1
Page: 9 of 10
Prepared date: 20-Nov-2007
Prepared by: Ryan Chen
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet - Preliminary
Top View LEDs
67-21/Y2C-AP2R2L/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-671-615
http://www.everlight.com
Prepared date: 20-Nov-2007
Rev. 1
Page: 10 of 10
Prepared by: Ryan Chen
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00199/img/page/Y2EDV2_1126028_files/Y2EDV2_1126028_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00199/img/page/Y2EDV2_1126028_files/Y2EDV2_1126028_2.jpg)
Y2EDV2F105A150P
AVX Multilayer Ceramic Transient Voltage Suppressors TVS Protection and EMI Attenuation in a Single Chip
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明