FDP5645S62Z [FAIRCHILD]
Power Field-Effect Transistor, 83A I(D), 60V, 0.0095ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN;型号: | FDP5645S62Z |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | Power Field-Effect Transistor, 83A I(D), 60V, 0.0095ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN |
文件: | 总10页 (文件大小:422K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
March 2000
FDP5645/FDB5645
60V N-Channel PowerTrench® MOSFET
General Description
Features
This N-Channel MOSFET has been designed
specifically to improve the overall efficiency of DC/DC
converters using either synchronous or conventional
switching PWM controllers.
· 80 A, 60 V.
RDS(ON) = 0.0095 W @ VGS = 10 V
RDS(ON) = 0.011 W @ VGS = 6 V.
· Critical DC electrical parameters specified at
elevated temperature.
These MOSFETs feature faster switching and lower
gate charge than other MOSFETs with comparable
RDS(ON) specifications.
· Rugged internal source-drain diode can eliminate the
need for an external Zener diode transient
suppressor.
The result is a MOSFET that is easy and safer to drive
(even at very high frequencies), and DC/DC power
supply designs with higher overall efficiency.
· High performance trench technology for extremely
low RDS(ON)
.
· 175°C maximum junction temperature rating.
D
D
G
G
G
S
TO-263AB
FDB Series
TO-220
FDP Series
D
S
S
Absolute Maximum Ratings TA =25oC unless otherwise noted
Symbol
VDSS
VGSS
Parameter
FDP5645
FDB5645
Units
Drain-Source Voltage
60
±20
80
300
125
0.83
V
V
A
Gate-Source Voltage
ID
Maximum Drain Current
– Continuous (note 3)
– Pulsed
PD
W
W/°C
°C
Total Power Dissipation @ TC = 25°C
Derate above 25°C
Operating and Storage Junction Temperature Range
Maximum lead termperature for soldering purposes,
1/8“ from case for 5 seconds
TJ, TSTG
TL
-65 to +175
+275
°C
Thermal Characteristics
RqJC
RqJA
Thermal Resistance, Junction-to-Case
Thermal Resistance, Junction-to-Ambient
1.2
62.5
°C/W
°C/W
Package Marking and Ordering Information
Device Marking
FDB5645
Device
Reel Size
13”
Tape width
Quantity
800 units
FDB5645
FDP5645
24mm
note 2
FDP5645
Ó 2000 Fairchild Semiconductor Corporation
FDP5645/FDB5645 Rev B (W)
Electrical Characteristics
TA = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min Typ Max Units
Drain-Source Avalanche Ratings (Note 1)
WDSS
IAR
Single Pulse Drain-Source
Avalanche Energy
VDD = 40 V,
ID = 80 A
800
80
mJ
A
Maximum Drain-Source Avalanche
Current
Off Characteristics
BVDSS
Drain–Source Breakdown Voltage
60
V
VGS = 0 V, ID = 250 mA
Breakdown Voltage Temperature
Coefficient
DBVDSS
DT
J
ID = 250 mA, Referenced to 25°C
64
mV/°C
IDSS
IGSSF
IGSSR
Zero Gate Voltage Drain Current
Gate–Body Leakage, Forward
Gate–Body Leakage, Reverse
VDS = 48 V,
VGS = 20 V,
VGS = 20 V,
VGS = 0 V
VDS = 0 V
VDS = 0 V
1
100
–100
mA
nA
nA
On Characteristics
(Note 1)
VGS(th)
Gate Threshold Voltage
2
4
V
VDS = VGS , ID = 250 mA
Gate Threshold Voltage
Temperature Coefficient
Static Drain–Source
On–Resistance
DVGS(th)
ID = 250 mA, Referenced to 25°C
-7.8
mV/°C
mW
DT
J
RDS(on)
VGS = 10 V,
ID = 40 A
8
13
9
9.5
18
11
VGS=10V, ID = 40 A, TJ=125°C
VGS = 6 V,
VGS = 10 V,
VDS = 5 V,
ID = 38 A
VDS = 10 V
ID = 40 A
ID(on)
gFS
On–State Drain Current
60
A
S
Forward Transconductance
88
Dynamic Characteristics
C
Input Capacitance
4468
810
pF
pF
pF
iss
VDS = 30 V,
f = 1.0 MHz
V GS = 0 V,
Coss
Output Capacitance
C
rss
Reverse Transfer Capacitance
198
Switching Characteristics (Note 2)
td(on)
tr
td(off)
tf
Turn–On Delay Time
Turn–On Rise Time
Turn–Off Delay Time
Turn–Off Fall Time
Total Gate Charge
Gate–Source Charge
Gate–Drain Charge
21
13
77
42
76
18
21
30
20
ns
ns
VDD = 30 V,
VGS = 10 V,
ID = 1 A,
RGEN = 6 W
90
ns
50
ns
Qg
107
nC
nC
nC
VDS = 30 V,
VGS = 10 V
ID = 80 A,
Qgs
Qgd
Drain–Source Diode Characteristics and Maximum Ratings
IS
IS
Maximum Continuous Drain–Source Diode Forward Current
Maximum Pulsed Drain–Source Diode Forward Current
80
300
1.3
A
A
V
VSD
Drain–Source Diode Forward
Voltage
VGS = 0 V, IS = 40 A
0.9
Notes:
1. Pulse Test: Pulse Width < 300ms, Duty Cycle < 2.0%
2. TO-220 package is supplied in tube / rail @ 45 pieces per rail.
3. Calculated continuous current based on maximum allowable junction temperature. Actual maximum continuous current limited by package constraints to 75A
FDP5645/FDB5645 Rev. B (W)
Typical Characteristics
100
2
1.8
1.6
1.4
1.2
1
VGS = 10V
7.0V
6.0V
80
60
40
20
0
5.0V
VGS = 4.5V
4.5V
5.0V
6.0V
7.0V
8.0V
10V
4.0V
0.8
0
1
2
3
4
5
0
20
40
60
80
100
VDS , DRAIN-SOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 1. On-Region Characteristics.
Figure 2. On-Resistance Variation with
Drain Current and Gate Voltage.
0.024
2.2
ID = 42A
ID = 42A
VGS = 10V
2
0.02
0.016
0.012
0.008
0.004
0
1.8
1.6
1.4
1.2
1
TA = 125oC
TA = 25oC
0.8
0.6
0.4
-50
-25
0
25
50
75
100
125
150
175
3
4
5
6
7
8
9
10
TJ, JUNCTION TEMPERATURE (oC)
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 3. On-Resistance Variation
withTemperature.
Figure 4. On-Resistance Variation with
Gate-to-Source Voltage.
100
90
VGS = 0V
VDS = 5V
80
70
60
50
40
30
20
10
0
10
TA = 125oC
25oC
1
-55oC
0.1
TA = 125oC
25oC
0.01
-55oC
0.001
0
0.2
0.4
0.6
0.8
1
1.2
1.4
2
3
4
5
6
VSD, BODY DIODE FORWARD VOLTAGE (V)
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 5. Transfer Characteristics.
Figure 6. Body Diode Forward Voltage Variation
with Source Current and Temperature.
FDP5645/FDB5645 Rev. B (W)
Typical Characteristics
10
6000
5000
4000
3000
2000
1000
0
f = 1MHz
VGS = 0 V
ID = 85A
VDS
=
20V
8
6
4
2
0
30V
CISS
COSS
CRSS
0
10
20
30
40
50
60
70
80
0
10
20
30
40
50
60
Qg, GATE CHARGE (nC)
VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 7. Gate Charge Characteristics.
Figure 8. Capacitance Characteristics.
1000
5000
SINGLE PULSE
R
qJC = 1.2oC/W
TC = 25oC
4000
3000
2000
1000
0
100
10
1
100
s
m
RDS(ON) LIMIT
1ms
10ms
100ms
VGS = 10V
SINGLE PULSE
DC
Rq = 1.2oC/W
JC
TC = 25oC
0.1
1
10
100
0.01
0.1
1
10
100
1000
VDS, DRAIN-SOURCE VOLTAGE (V)
SINGLE PULSE TIME (ms)
Figure 9. Maximum Safe Operating Area.
Figure 10. Single Pulse Maximum
Power Dissipation.
1
0.5
D = 0.5
0.3
0.2
R
(t) = r(t) * R
JC
q
JC
JC
q
0.2
R
= 1.2 °C/W
q
0.1
0.1
P(pk)
0.05
0.05
t
1
0.02
0.01
t
2
0.03
0.02
T
- T = P * R
(t)
JC
J
q
C
Duty Cycle, D = t / t
1
Single Pulse
2
0.01
0.01
0.05
0.1
0.5
1
5
10
50
100
500
1000
t
,TIME (ms)
1
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in Note 1c.
Transient thermal response will change depending on the circuit board design.
FDP5645/FDB5645 Rev. B (W)
TO-220 Tape and Reel Data and Package Dimensions
TO-220 Tube Packing
Configuration: Figur e 1.0
Packaging Description:
TO-220 parts are shipped normally in tube. The tube is
made of PVC plastic treated with anti-static agent.These
tubes in standard option are placed inside
plastic bag, barcode labeled, and placed inside
a
dissipative
box
a
45 units per Tube
made of recyclable corrugated paper. One box contains
two bags maximum (see fig. 1.0). And one or several of
these boxes are placed inside
a labeled shipping box
whic h comes in different sizes dependi ng on the number
of parts shipped. The other option comes in bulk as
described in the Packaging Information table. The units in
this option are placed inside
static bubble sheet. These smaller boxes are individually
labeled and placed inside larger box (see fig. 3.0).
These larger or intermediate boxes then will be placed
finally inside a labeled shipping box which still comes in
different sizes depending on the number of units shipped.
a small box laid with anti-
a
12 Tubes per Bag
530mm x 130mm x 83mm
Intermediate box
2 bags per Box
Conduct ive Plastic Bag
TO-220 Packaging
Information: Figure 2.0
FSCINT Label sample
FAIRCHILD SEMICONDUCTOR CORPORATION
HTB:B
QTY:
1080
LOT:
CBVK741B019
1080 units maximum
quantity per box
TO-220 Packaging Information
NSID:
D/C1:
SPEC:
FDP7060
Standard
(no flow code)
Packaging Option
S62Z
SPEC REV:
QA REV:
D9842
B2
Packaging type
Rail/Tube
BULK
300
Qty per Tube/Box
Box Dimension (mm)
Max qty per Box
45
FSCINT Label
(FSCINT)
530x130x83 114x102x51
1,080
1,500
Weight per unit (gm)
1.4378
1.4378
Note/Comments
TO-220 bulk Packing
Configuration: Figure 3.0
Anti-static
530mm x 130mm x 83mm
Intermediate box
Bubbl e Sheets
FSCINT Label
1500 units maximum
quantity per intermediate box
300 units per
EO70 box
5 EO70 boxes per per
Intermediate Box
114mm x 102mm x 51mm
EO70 Immediate Box
FSCINT Label
TO-220 Tube
Configuration: Figure 4.0
0.123
+0.001
-0.003
0.165
0.080
Note: All dim ensions are in inches
0.275
0.450
±.030
9852
9852
9852
9852
9852
9852
9852 9852 9852 9852 9852
F F F F F
NDP4060L NDP4060L NDP4060L NDP4060L NDP4060L NDP4060L
9852
F
F
F
F
F
F
F
NDP4060L NDP4060L NDP4060L NDP4060L NDP4060L NDP4060L
1.300
±.015
0.160
0.032
±.003
20.000
+0.031
-0.065
0.800
0.275
August 1999, Rev. B
TO-220 Tape and Reel Data and Package Dimensions, continued
TO-220 (FS PKG Code 37)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 1.4378
September 1998, Rev. A
TO-263AB/D2PAK Tape and Reel Data and Package
Dimensions
TO-263AB/D2PAK Packaging
Configuration: Figure 1.0
Packaging Description:
TO-263/D2PAK parts are shipped in tape. The carrier tape
ELECTROSTATIC
SENSITIVE DEVICES
is made from
a dissipative (carbon filled) polycarbonate
DO NO
T
S
M
HI
P
OR
S
TO
RE
N
E
AR
S
T
RO NG
E
L
E
CTROS
T
ATIC
E
L
E
CTRO
AGN
E
TI
C,
M
AG NE
T
IC
O
R R ADIO ACTIVE FI ELD S
TNR DATE
PT NUMB E
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
800 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). This and some other options are further
described in the Packaging Information table.
R
PEEL STRENGTH MIN ______________gms
MAX _____________gms
Antistatic Cover Tape
ESD Label
These full reels are individually barcode labeled, dry
packed, and placed inside
a standard intermediate box
(illustrated in figure 1.0) made of recyclable corrugated
brown paper. One box contains one reel maximum. And
these boxes are placed inside a barcode labeled shipping
box which comes in different sizes depending on the
number of parts shipped.
Static Dissipative
Embossed Carrier Tape
Moisture Sensitive
Label
F63TNR
Label
Customized
Label
A 3 L 0 B 6 D F
3 5 9 F 8
A 3 L 0 B 6 D F
3 5 9 F 8
A 3 L 0 B 6 D F
3 5 9 F 8
A 3 L 0 B 6 D F
3 5 9 F 8
TO-263AB/D2PAK Packaging Information
Standard
(no flow code)
L86Z
Packaging Option
TO-263AB/D2PAK Unit Orientation
Packaging type
TNR
800
Rail/Tube
Qty per Reel/Tube/Bag
Reel Size
45
-
13" Dia
Box Dimension (mm)
Max qty per Box
Weight per unit (gm)
Weight per Reel
359x359x57 530x130x83
800
1,080
1.4378
-
359mm x 359mm x 57mm
Standard Intermediate box
1.4378
1.6050
ESD Label
Note/Comments
Moisture Sensitive
Label
F63TNR Label sample
F63TNR Label
LOT: CBVK741B019
QTY: 800
SPEC:
FSID: FDB6320L
DRYPACK Bag
D/C1: D9842
D/C2:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
TO-263AB/D2PAK Tape Leader and Trailer
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Components
Trailer Tape
Leader Tape
400mm minimum or
25 empty pockets
1520mm minimum or
95 empty pockets
September 1999, Rev. B
TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued
TO-263AB/D2PAK Embossed Carrier Tape
Configuration: Figure 3.0
P0
D0
T
E1
E2
F
W
K0
Wc
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
A0
B0
W
D0
D1
E1
E2
F
P1
P0
K0
T
Wc
Tc
Pkg type
TO263AB/
D2PAK
(24mm)
10.60
+/-0.10
15.80
+/-0.10
24.0
+/-0.3
1.55
+/-0.05
1.60
+/-0.10
1.75
+/-0.10
22.25
min
11.50
+/-0.10
16.0
+/-0.1
4.0
+/-0.1
4.90
+/-0.10
0.450
+/-0.150
21.0
+/-0.3
0.06
+/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
0.9mm
maximum
10 deg maximum
Typical
component
cavity
center line
0.9mm
maximum
B0
10 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
Component Rotation
Sketch C (Top View)
Component lateral movement
A0
Sketch B (Top View)
Component Rotation
TO-263AB/D2PAK Reel Configuration:
Figure 4.0
W1 Measured at Hub
Dim A
Max
B Min
Dim C
Dim A
max
Dim D
min
Dim N
DETAIL AA
See detail AA
W3
13" Diameter Option
W2 max Measured at Hub
Dimensions are in inches and millimeters
Reel
Option
Tape Size
Dim A
Dim B
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.961 +0.078/-0.000
24.4 +2/0
1.197
30.4
0.941 – 0.1.079
23.9 – 27.4
24mm
13" Dia
August 1999, Rev. B
TO-263AB/D2PAK Tape and Reel Data and Package Dimensions, continued
TO-263AB/D2PAK (FS PKG Code 45)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 1.4378
August 1998, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench
QFET™
SyncFET™
TinyLogic™
UHC™
CROSSVOLT™
E2CMOSTM
VCX™
FACT™
FACT Quiet Series™
QS™
FAST®
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GTO™
HiSeC™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Obsolete
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. D
相关型号:
FDP5680S62Z
Power Field-Effect Transistor, 40A I(D), 60V, 0.02ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN
FAIRCHILD
FDP5690S62Z
Power Field-Effect Transistor, 32A I(D), 60V, 0.027ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN
FAIRCHILD
FDP5N50NZ
Power Field-Effect Transistor, 4.5A I(D), 500V, 1.5ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, ROHS COMPLIANT, TO-220, 3 PIN
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明