FSA2267AL10X [FAIRCHILD]

0.35 ohm Low Voltage Dual SPDT Analog Switch; 0.35欧姆的低电压双通道单刀双掷模拟开关
FSA2267AL10X
型号: FSA2267AL10X
厂家: FAIRCHILD SEMICONDUCTOR    FAIRCHILD SEMICONDUCTOR
描述:

0.35 ohm Low Voltage Dual SPDT Analog Switch
0.35欧姆的低电压双通道单刀双掷模拟开关

复用器 开关 复用器或开关 信号电路 光电二极管 输出元件
文件: 总8页 (文件大小:566K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
January 2005  
Revised March 2005  
FSA2267 FSA2267A  
0.35: Low Voltage Dual SPDT Analog Switch  
General Description  
Features  
The FSA2267 and FSA2267A are Dual Single Pole Double  
Throw (SPDT) analog switches. The FSA2267 operates  
from a single 1.65V to 3.6V supply while the FSA2267A  
operates from a single 2.3V to 4.3V supply. Each features  
an ultra-low On Resistance of 0.35 at a 2.7V supply and  
25C. Both devices are fabricated with sub-micron CMOS  
technology to achieve fast switching speeds and is  
designed for break-before-make operation.  
Typical 0.35 On Resistance (RON) for 2.7V supply  
FSA2267A features ICCT when S Input is lower than VCC  
0.25 maximum RON flatness for 2.7V supply  
1.6mm x 2.1mm 10-Lead Pb-Free MicroPak package  
Broad VCC operating range  
Low THD (0.02% typical for 32 load)  
High current handling capability  
(350mA continuous current under 3.3V supply)  
FSA2267A features very low quiescent current even when  
the control voltage is lower than the VCC supply. This fea-  
ture services the mobile handset applications very well  
allowing for the direct interface with baseband processor  
general purpose I/Os.  
Ordering Code:  
Product  
Order  
Package  
Code  
Package Description  
Supplied As  
Number  
Number Top Mark  
FSA2267L10X MAC010A  
FC  
FD  
Pb-Free 10-Lead MicroPak, 1.6 mm x 2.1mm  
Pb-Free 10-Lead MicroPak, 1.6 mm x 2.1mm  
5K Units on Tape and Reel  
5K Units on Tape and Reel  
FSA2267AL10X MAC010A  
(Preliminary)  
Pb-Free package per JEDEC J-STD-020B.  
Analog Symbols  
Truth Table  
Control Input(s)  
Function  
L
B
B
0 Connected to A  
1 Connected to A  
H
H
L
HIGH Logic Level  
LOW Logic Level  
Pin Descriptions  
Pin Names  
1A, 2A, 1B0, 1B1, 2B0, 2B1  
1S, 2S  
Function  
Data Ports  
Control Input  
(Top Through View)  
MicroPak is a trademark of Fairchild Semiconductor Corporation.  
© 2005 Fairchild Semiconductor Corporation  
DS500897  
www.fairchildsemi.com  
Absolute Maximum Ratings(Note 1)  
Recommended Operating  
Conditions  
Supply Voltage (VCC  
)
0.5V to 4.6V  
0.5V to VCC 0.5V  
0.5V to 4.6V  
50 mA  
Switch Voltage (VS) (Note 2)  
Input Voltage (VIN) (Note 2)  
Input Diode Current  
Supply Voltage (VCC  
)
FSA2267  
1.65V to 3.6V  
2.3V to 4.3V  
0V to VCC  
FSA2267A  
Switch Current  
350 mA  
Control Input Voltage (VIN) (Note 3)  
Switch Input Voltage (VIN  
Operating Temperature (TA)  
Peak Switch Current (Pulsed at  
1 ms duration, 10% Duty Cycle)  
)
0V to VCC  
500 mA  
65 C to 150 C  
150 C  
40 C to 85 C  
Storage Temperature Range (TSTG  
)
Note 1: The “Absolute Maximum Ratings” are those values beyond which  
the safety of the device cannot be guaranteed. The device should not be  
operated at these limits. The parametric values defined in the Electrical  
Characteristics tables are not guaranteed at the absolute maximum ratings.  
The “Recommended Operating Conditions” table will define the conditions  
for actual device operation.  
Maximum Junction Temperature (TJ)  
Lead Temperature (TL)  
Soldering, 10 seconds  
260 C  
ESD  
Note 2: The input and output negative voltage ratings may be exceeded if  
the input and output diode current ratings are observed.  
Human Body Model: FSA2267  
Human Body Model: FSA2267A  
7500V  
7000V  
Note 3: Unused inputs must be held HIGH or LOW. They may not float.  
DC Electrical Characteristics - FSA2267  
(All typical values are @ 25 C unless otherwise specified)  
V
T
25 C  
T
A
40 C to 85 C  
CC  
A
Symbol  
Parameter  
Units  
Conditions  
(V)  
Min  
Typ  
Max  
Min  
Max  
V
Input Voltage High  
2.7 to 3.6  
2.3 to 2.7  
1.65 to 1.95  
2.7 to 3.6  
2.3 to 2.7  
1.65 to 1.95  
1.65 to 3.6  
3.6  
2.0  
1.7  
IH  
IL  
V
0.65 V  
CC  
V
Input Voltage Low  
0.8  
0.7  
V
A
0.35 V  
0.5  
CC  
I
Control Input Leakage  
OFF-Leakage Current  
0.5  
V
0V to V  
CC  
IN  
IN  
I
,
-5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
50.0  
50.0  
50.0  
50.0  
50.0  
50.0  
50.0  
0.6  
nA 0.3V, 3.3V,  
nB or nB 0.3V, 3.3V  
nA 0.3V, 2.4V,  
nB or nB 0.3V, 2.4V or Floating  
nA 0.3V, 1.65V,  
nB or nB 0.3V, 1.65V or Floating  
nA 0.3V, 3.3V  
nB or nB 0.3V, 3.3V or Floating  
nA 0.3V, 2.4V  
nB or nB 0.3V, 2.4V or Floating  
nA 0.3V, 1.65V  
nB or nB 0.3V, 1.65V or Floating  
NO(OFF)  
I
of Port nB and nB  
0 1  
NC(OFF)  
0
1
2.7  
1.95  
3.6  
50.0  
50.0  
50.0  
50.0  
50.0  
nA  
nA  
0
1
0
1
I
ON Leakage Current  
of Port A  
A(ON)  
0
1
2.7  
0
1
1.95  
2.7  
0
1
R
Switch On Resistance  
(Note 4)  
0.35  
0.45  
I
100 mA, nB or nB  
0V,  
ON  
OUT  
0
1
1
1
1
0.7V, 2.0V, 2.7V  
100 mA, nB or nB  
2.3  
0.75  
I
0V,  
OUT  
0
0.7V, 1.6V, 2.3V  
1.65  
2.7  
1.0  
0.04  
0.16  
0.1  
3.9  
0.075  
0.08  
I
I
100 mA, nB or nB  
0.8V  
0.7V  
OUT  
OUT  
0
R
On Resistance Matching  
Between Channels  
(Note 5)  
ON  
2.3  
100 mA, nB or nB  
0
1.65  
2.7  
R
On Resistance Flatness  
(Note 6)  
0.25  
0.3  
FLAT(ON)  
2.3  
I
100 mA, nB or nB  
0V to V  
CC  
OUT  
0
1
1.65  
3.6  
0.3  
I
Quiescent Supply Current  
100  
100  
500  
500  
nA  
V
0V or V , I  
CC OUT  
0V  
CC  
IN  
Note 4: On Resistance is determined by the voltage drop between A and B pins at the indicated current through the switch.  
Note 5: measured at identical V , temperature, and voltage.  
Note 6: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions.  
R
R
R
ONmin  
ON  
ONmax  
CC  
www.fairchildsemi.com  
2
DC Electrical Characteristics - FSA2267A  
(All typical values are @ 25 C unless otherwise specified)  
V
T
25 C  
T
A
40 C to 85 C  
CC  
A
Symbol  
Parameter  
Units  
Conditions  
(V)  
Min  
Typ  
Max  
Min  
Max  
V
Input Voltage High  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
2.3 to 4.3  
4.3  
1.7  
1.5  
1.4  
IH  
V
V
Input Voltage Low  
0.7  
0.5  
0.4  
0.5  
100  
IL  
V
A
I
I
I
Control Input Leakage  
OFF-Leakage Current  
0.5  
V
0V to V  
CC  
IN  
IN  
,
-10.0  
5.0  
10.0  
5.0  
100  
nA 0.3V, 4.0V,  
nB or nB 4.0V, 0.3V  
nA 0.3V, 3.3V,  
nB or nB 0.3V, 3.3V or Floating  
nA 0.3V, 2.4V,  
nB or nB 0.3V, 2.4V or Floating  
nA 0.3V, 4.0V  
nB or nB 0.3V, 4.0V or Floating  
nA 0.3V, 3.3V  
nB or nB 0.3V, 3.3V or Floating  
nA 0.3V, 2.4V  
nB or nB 0.3V, 2.4V or Floating  
NO(OFF)  
NC(OFF)  
of Port nB and nB  
0
1
0
1
3.6  
2.7  
4.3  
3.6  
2.7  
4.3  
3.0  
2.7  
50.0  
50.0  
200  
50.0  
50.0  
200  
50.0  
50.0  
0.6  
nA  
nA  
0
1
5.0  
5.0  
0
1
I
ON Leakage Current  
of Port A  
20.0  
5.0  
20.0  
5.0  
A(ON)  
0
1
50.0  
50.0  
0
1
5.0  
5.0  
0
1
R
Switch On Resistance  
(Note 7)  
0.35  
0.35  
0.35  
I
100 mA, nB or nB  
0V,  
0V,  
0V  
ON  
OUT  
0
1
1
1
0.7V, 3.6V, 4.3V  
100 mA, nB or nB  
0.6  
I
OUT  
0
0.7V, 2.3V, 3.0V  
I 100 mA, nB or nB  
OUT  
0.6  
0
0.7V, 2.0V, 2.7V  
R
On Resistance Matching  
Between Channels  
(Note 8)  
4.3  
3.0  
2.7  
4.3  
3.0  
2.7  
4.3  
4.3  
0.04  
0.04  
0.04  
0.15  
0.15  
0.15  
0.075  
0.075  
0.075  
0.25  
0.25  
0.25  
500  
ON  
I
100 mA, nB or nB  
0.7V  
OUT  
OUT  
0
1
R
On Resistance Flatness  
(Note 9)  
FLAT(ON)  
I
100 mA, nB or nB  
0V to V  
0
1
CC  
I
I
Quiescent Supply Current  
100 80.0  
7.0  
100  
10.0  
2.0  
500  
nA  
A
V
V
V
0V or V , I  
CC OUT  
0V  
CC  
CCT  
IN  
IN  
IN  
Increase in I per Input  
15.0  
7.0  
1.8V  
2.6V  
CC  
0.5  
Note 7: On Resistance is determined by the voltage drop between A and B pins at the indicated current through the switch.  
Note 8: measured at identical V , temperature, and voltage.  
Note 9: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions.  
R
R
R
ONmin  
ON  
ONmax  
CC  
3
www.fairchildsemi.com  
AC Electrical Characteristics - FSA2267  
(All typical value are @ 25 C unless otherwise specified)  
V
T
25 C  
T
A
40 C to 85 C  
Figure  
CC  
A
Symbol  
Parameter  
Units  
Conditions  
(V)  
Min Typ Max  
30.0 38.0  
29.0 37.0  
27.0 35.0  
13.0 16.0  
14.0 18.0  
15.0 21.0  
17.0  
Min  
Max  
42.0  
40.0  
38.0  
18.0  
20.0  
25.0  
Number  
t
t
t
Turn ON Time  
2.7 to 3.6  
2.3 to 2.7  
1.65 to 1.95  
2.7 to 3.6  
2.3 to 2.7  
1.65 to 1.95  
nB or nB  
1
1.5V,  
35 pF  
ON  
0
ns  
R
50 , C  
Figure 1  
Figure 1  
Figure 2  
Figure 4  
Figure 3  
L
L
L
L
Turn OFF Time  
nB or nB  
1
1.5V,  
35 pF  
OFF  
B-M  
0
ns  
ns  
R
50 , C  
L
Break-Before-Make 2.7 to 3.6  
2.0  
2.0  
2.0  
nB or nB  
1.5V,  
35 pF  
0
1
Time  
2.3 to 2.7  
1.65 to 1.95  
2.7 to 3.6  
15.0  
R
50 , C  
L
12.0  
Q
Charge Injection  
9.0  
C
C
C
100 pF, V  
100 pF, V  
100 pF, V  
0V, R  
0
0
0
L
L
L
GEN  
GEN  
GEN  
GEN  
GEN  
GEN  
2.3 to 2.7  
9.0  
pC  
dB  
0V, R  
0V, R  
1.65 to 1.95  
2.7 to 3.6  
9.0  
OIRR  
Xtalk  
OFF-Isolation  
Crosstalk  
80.0  
2.3 to 2.7  
80.0  
f
f
100kHz, R  
50 , C  
5 pF (Stray)  
5 pF (Stray)  
L
L
L
1.65 to 1.95  
2.7 to 3.6  
80.0  
80.0  
2.3 to 2.7  
80.0  
dB  
MHz  
%
100kHz, R  
50  
50 , C  
Figure 3  
Figure 6  
L
1.65 to 1.95  
1.65 to 3.6  
2.7 to 3.6  
80.0  
BW  
3db Bandwidth  
Total Harmonic  
Distortion  
45.0  
R
R
R
R
L
L
L
L
THD  
0.024  
32 , V  
2V P.P, f 20Hz to 20kHz  
IN  
2.3 to 2.7  
0.015  
32 , V  
32 , V  
1.5V P.P, f 20Hz to 20kHz Figure 7  
1.2V P.P, f 20Hz to 20kHz  
IN  
IN  
1.65 to 1.95  
0.35  
AC Electrical Characteristics - FSA2267A  
(All typical value are @ 25 C unless otherwise specified)  
V
T
25 C  
T
A
40 C to 85 C  
Figure  
CC  
A
Symbol  
Parameter  
Units  
Conditions  
Number  
(V)  
Min Typ Max  
37.0 46.0  
37.0 50.0  
60.0  
Min  
Max  
48.0  
57.0  
t
t
t
Turn ON Time  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
nB or nB  
1
1.5V,  
35 pF  
ON  
0
ns  
R
50 , C  
Figure 1  
Figure 1  
Figure 2  
Figure 4  
Figure 3  
L
L
L
L
Turn OFF Time  
15.0 23.0  
16.0 28.0  
50.0  
25.0  
30.0  
nB or nB  
1
1.5V,  
35 pF  
OFF  
B-M  
0
ns  
ns  
R
50 , C  
L
Break-Before-Make 3.6 to 4.3  
8.0  
2.0  
2.0  
2.0  
nB or nB  
1.5V,  
35 pF  
0
1
Time  
2.7 to 3.6  
2.3 to 2.7  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
2.3 to 4.3  
3.6 to 4.3  
2.7 to 3.6  
2.3 to 2.7  
8.0  
R
50 , C  
L
8.0  
Q
Charge Injection  
24.0  
C
C
C
100 pF, V  
100 pF, V  
100 pF, V  
0V, R  
0
0
0
L
L
L
GEN  
GEN  
GEN  
GEN  
GEN  
GEN  
24.0  
pC  
dB  
0V, R  
0V, R  
24.0  
OIRR  
Xtalk  
OFF-Isolation  
Crosstalk  
75.0  
75.0  
f
f
100kHz, R  
50 , C  
5 pF (Stray)  
5 pF (Stray)  
L
L
L
75.0  
70.0  
70.0  
dB  
MHz  
%
100kHz, R  
50  
50 , C  
Figure 3  
Figure 6  
L
70.0  
BW  
3db Bandwidth  
Total Harmonic  
Distortion  
45.0  
R
R
R
R
L
L
L
L
THD  
0.02  
32 , V  
2V P.P, f 20Hz to 20kHz  
IN  
0.02  
32 , V  
32 , V  
1.5V P.P, f 20Hz to 20kHz Figure 7  
1.2V P.P, f 20Hz to 20kHz  
IN  
IN  
0.02  
www.fairchildsemi.com  
4
Capacitance  
V
T
25 C  
Typ Max  
T
40 C to 85 C  
Min Max  
CC  
A
A
Symbol  
Parameter  
Units  
Conditions  
(V)  
0.0  
3.3  
3.3  
Min  
C
Control Pin Input Capacitance  
B Port OFF Capacitance  
A Port ON Capacitance  
1.5  
30.0  
126  
pF  
pF  
pF  
f
f
f
1MHz (see Figure 5)  
1MHz (see Figure 5)  
1MHz (see Figure 5)  
IN  
C
C
OFF  
ON  
AC Loading and Waveforms  
Logic Input Waveforms Inverted  
for Switches that have the Opposite Logic Sense  
C
L includes Fixture and Stray Capacitance  
FIGURE 1. Turn-On/Turn-Off Timing  
C
L Includes Fixture and Stray Capacitance  
FIGURE 2. Break-Before-Make Timing  
FIGURE 3. OFF Isolation and Crosstalk  
5
www.fairchildsemi.com  
AC Loading and Waveforms (Continued)  
Q
( VOUT)(CL)  
FIGURE 4. Charge Injection  
FIGURE 5. ON/OFF Capacitance Measurement Setup  
FIGURE 6. Bandwidth  
FIGURE 7. Harmonic Distortion  
www.fairchildsemi.com  
6
Tape and Reel Specification  
Tape Format For Micropak 10  
Package  
Tape  
Section  
Number  
Cavities  
125 (typ)  
5000  
Cavity  
Status  
Empty  
Filled  
Cover Tape  
Status  
Designator  
Leader (Start End)  
Carrier  
Sealed  
L10X  
Sealed  
Trailer (Hub End)  
75 (typ)  
Empty  
Sealed  
REEL DIMENSIONS inches (millimeters)  
Tape  
Size  
A
B
C
D
N
W1  
W2  
W3  
7.0  
0.059  
0.512  
0.795  
2.165 0.331 0.059/ 0.000  
0.567  
W1 0.078/ 0.039  
(W1 2.00/ 1.00)  
8 mm  
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 1.50/ 0.00)  
(14.40)  
7
www.fairchildsemi.com  
Physical Dimensions inches (millimeters) unless otherwise noted  
Pb-Free 10-Lead MicroPak, 1.6 mm x 2.1mm  
Package Number MAC010A  
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and  
Fairchild reserves the right at any time without notice to change said circuitry and specifications.  
LIFE SUPPORT POLICY  
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT  
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD  
SEMICONDUCTOR CORPORATION. As used herein:  
1. Life support devices or systems are devices or systems  
which, (a) are intended for surgical implant into the  
body, or (b) support or sustain life, and (c) whose failure  
to perform when properly used in accordance with  
instructions for use provided in the labeling, can be rea-  
sonably expected to result in a significant injury to the  
user.  
2. A critical component in any component of a life support  
device or system whose failure to perform can be rea-  
sonably expected to cause the failure of the life support  
device or system, or to affect its safety or effectiveness.  
www.fairchildsemi.com  
www.fairchildsemi.com  
8

相关型号:

FSA2267AMUX

0.35 ohm Low Voltage Dual-SPDT Analog Switch
FAIRCHILD

FSA2267AMUX

0.35Ω 低压双 SPDT 模拟开关
ONSEMI

FSA2267L10X

0.35 ohm Low Voltage Dual SPDT Analog Switch
FAIRCHILD

FSA2267L10X

0.35Ω 低压双 SPDT 模拟开关
ONSEMI

FSA2267L10X_NL

SPDT, 2 Func, 1 Channel, CMOS, 1.60 X 2.10 MM, LEAD FREE, MO-255UABD, MICROPAK-10
FAIRCHILD

FSA2267MUX

0.35 ohm Low Voltage Dual-SPDT Analog Switch
FAIRCHILD

FSA2267_0703

0.35ヘ Low-Voltage Dual-SPDT Analog Switch
FAIRCHILD

FSA2267_12

0.35 Low-Voltage Dual-SPDT Analog Switch
FAIRCHILD

FSA2268

Low-Voltage Dual-SPDT (0.4OHM) Analog Switch with 16kV ESD
FAIRCHILD

FSA2268L10X

Low-Voltage Dual-SPDT (0.4ヘ) Analog Switch with 16kV ESD
FAIRCHILD

FSA2268L10X

低电压双 SPDT (0.4Ω) 模拟开关,带 16kV ESD
ONSEMI

FSA2268T

Low-Voltage Dual-SPDT (0.4ヘ) Analog Switch with 16kV ESD
FAIRCHILD