NC7WP04P6X [FAIRCHILD]
TinyLogic ULP Dual Inverter; TinyLogic ULP双变频器
| 型号： | NC7WP04P6X |
| 厂家： | 
FAIRCHILD SEMICONDUCTOR |
| 描述： | TinyLogic ULP Dual Inverter |
| 文件： | 总9页 (文件大小：181K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Preliminary
September 2003
Revised March 2004
NC7WP04
TinyLogic ULP Dual Inverter (Preliminary)
General Description
Features
The NC7WP04 is a dual inverter from Fairchild’s Ultra Low
Power (ULP) Series of TinyLogic . Ideal for applications
where battery life is critical, this product is designed for
ultra low power consumption within the VCC operating
■ 0.9V to 3.6V VCC supply operation
■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V
■ tPD
range of 0.9V to 3.6V.
4.0 ns typ for 3.0V to 3.6V VCC
5.0 ns typ for 2.3V to 2.7V VCC
6.0 ns typ for 1.65V to 1.95V VCC
7.0 ns typ for 1.40V to 1.60V VCC
11.0 ns typ for 1.10V to 1.30V VCC
27.0 ns typ for 0.90V VCC
The internal circuit is composed of a minimum of inverter
stages including the output buffer, to enable ultra low static
and dynamic power.
The NC7WP04, for lower drive requirements, is uniquely
designed for optimized power and speed, and is fabricated
with an advanced CMOS technology to achieve best in
class speed operation while maintaining extremely low
CMOS power dissipation.
■ Power-Off high impedance inputs and outputs
■ Static Drive (IOH/IOL
)
±2.6 mA @ 3.00V VCC
±2.1 mA @ 2.30V VCC
±1.5 mA @ 1.65V VCC
±1.0 mA @ 1.40V VCC
±0.5 mA @ 1.10V VCC
±20 µA @ 0.9V VCC
■ Uses patented Quiet Series noise/EMI reduction
circuitry
■ Ultra small MicroPak leadfree package
■ Ultra low dynamic power
Ordering Code:
Package
Number
MAA06A
MAC06A
Product Code
Top Mark
P04
Order Number
Package Description
Supplied As
NC7WP04P6X
NC7WP04L6X
6-Lead SC70, EIAJ SC88, 1.25mm Wide
6-Lead MicroPak, 1.0mm Wide
3k Units on Tape and Reel
5k Units on Tape and Reel
BF
Battery Life vs. V Supply Voltage
CC
TinyLogic ULP and ULP-A with up to 50% less power consumption can
extend your battery life significantly.
Battery Life = (Vbattery *Ibattery*.9) / (Pdevice) / 24hrs/day
Where, Pdevice = (ICC * VCC) + (CPD + CL) * VCC2 * f
Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and
derated 90% and device frequency at 10MHz, with CL = 15 pF load
TinyLogic is a registered trademark of Fairchild Semiconductor Corporation.
Quiet Series and MicroPak are trademarks of Fairchild Semiconductor Corporation.
© 2004 Fairchild Semiconductor Corporation
DS500855
www.fairchildsemi.com
Preliminary
Logic Symbol
Connection Diagrams
IEEE/IEC
Pin Assignments for SC70
(Top View)
Pin Descriptions
Pin One Orientation Diagram
Pin Names
A1, A2
Description
Data Inputs
Outputs
Y1, Y2
Function Table
Y = A
Inputs
Output
AAA represents Product Code Top Mark - see ordering code
Note: Orientation of Top Mark determines Pin One location. REad the Top
Product Code Mark left to right, Pin One is the lower left pin (see diagram).
A
L
Y
H
L
H
Pad Assignments for MicroPak
H = HIGH Logic Level
L = LOW Logic Level
(Top Thru View)
www.fairchildsemi.com
2
Preliminary
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 3)
−0.5V to +4.6V
Supply Voltage (VCC
DC Input Voltage (VIN
DC Output Voltage (VOUT
HIGH or LOW State (Note 2)
CC = 0V
DC Input Diode Current (IIK) VIN < 0V
DC Output Diode Current (IOK
)
)
−0.5V to +4.6V Supply Voltage
0.9V to 3.6V
0V to 3.6V
)
Input Voltage (VIN
)
−0.5V to VCC +0.5V
−0.5V to 4.6V
±50 mA
Output Voltage (VOUT
)
V
HIGH or LOW State
CC = 0V
Output Current in IOH/IOL
0V to VCC
0V to 3.6V
V
)
V
V
OUT < 0V
−50 mA
+50 mA
± 50 mA
V
V
V
V
V
V
CC = 3.0V to 3.6V
CC = 2.3V to 2.7V
CC = 1.65V to 1.95V
CC = 1.40V to 1.60V
CC = 1.10V to 1.30V
CC = 0.9V
±2.6 mA
± 2.1 mA
OUT > VCC
DC Output Source/Sink Current (IOH/IOL
DC VCC or Ground Current per
Supply Pin (ICC or Ground)
)
± 1.5 mA
± 1 mA
± 50 mA
±0.5 mA
Storage Temperature Range (TSTG
)
−65°C to +150°C
±20 µA
Free Air Operating Temperature (TA)
−40°C to +85°C
Minimum Input Edge Rate (∆t/∆V)
V
IN = 0.8V to 2.0V, VCC = 3.0V
10 ns/V
Note 1: Absolute Maximum Ratings: are those values beyond which the
safety of the device cannot be guaranteed. The device should not be oper-
ated at these limits. The parametric values defined in the Electrical Charac-
teristics tables are not guaranteed at the absolute maximum ratings. The
“Recommended Operating Conditions” table will define the conditions for
actual device operation.
Note 2: IO Absolute Maximum Rating must be observed.
Note 3: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
VCC
T
A = +25°C
TA = −40°C to +85°C
Symbol
Parameter
Units
Conditions
(V)
Min
Max
Min
Max
VIH
HIGH Level
0.90
0.65 x VCC
0.65 x VCC
0.65 x VCC
0.65 x VCC
0.65 x VCC
1.6
Input Voltage
1.10 ≤ VCC ≤ 1.30 0.65 x VCC
1.40 ≤ VCC ≤ 1.60 0.65 x VCC
1.65 ≤ VCC ≤ 1.95 0.65 x VCC
V
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0.90
1.6
2.1
2.1
VIL
LOW Level
0.35 x VCC
0.35 x VCC
0.35 x VCC
0.35 x VCC
0.7
0.35 x VCC
0.35 x VCC
0.35 x VCC
0.35 x VCC
0.7
Input Voltage
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0.90
V
0.9
0.9
VOH
HIGH Level
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
VCC − 0.1
Output Voltage
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
I
OH = −20 µA
V
1.10 ≤ VCC ≤ 1.30 0.75 x VCC
0.70 x VCC
0.99
I
I
I
I
I
OH = −0.5 mA
OH = −1 mA
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
1.07
1.24
1.95
2.61
1.22
OH = −1.5 mA
OH = −2.1 mA
OH = −2.6 mA
1.87
2.55
3
www.fairchildsemi.com
Preliminary
DC Electrical Characteristics (Continued)
VCC
T
A = +25°C
Max
TA = −40°C to +85°C
Symbol
Parameter
LOW Level
Units
Conditions
(V)
Min
Min
Max
0.1
VOL
0.90
0.1
0.1
Output Voltage
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0.90 to 3.60
0.1
0.1
0.1
I
OL = 20 µA
0.1
0.1
0.1
0.1
0.1
0.1
V
0.30 x VCC
0.31
0.31
0.31
0.31
±0.1
0.5
0.30 x VCC
0.37
0.35
0.33
0.33
±0.5
0.5
I
I
I
I
I
OL = 0.5 mA
OL = 1 mA
OL = 1.5 mA
OL = 2.1 mA
OL = 2.6 mA
IIN
Input Leakage Current
µA
µA
µA
0 ≤ VI ≤ 3.6V
IOFF
ICC
Power Off Leakage Current
Quiescent Supply Current
0
0 ≤ (VI, VO) ≤ 3.6V
VI = VCC or GND
0.90 to 3.60
0.9
0.9
AC Electrical Characteristics
VCC
T
A = +25°C
TA = −40°C to +85°C
Figure
Number
Symbol
Parameter
Units
Conditions
(V)
Min
Typ
27
11
7
Max
Min
Max
tPHL
tPLH
Propagation Delay
0.90
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0.90
3.5
2.5
2.0
1.5
1.0
27.0
14.8
12.0
9.4
3.0
2.0
1.5
1.0
1.0
34.3
15.0
12.2
9.9
C
L = 10 pF
L = 1 MΩ
Figures
1, 2
ns
ns
ns
6
R
5
4
8.3
9.0
tPHL
tPLH
Propagation Delay
30
11
8
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0.90
4.0
3.0
2.5
2.0
1.5
28.2
15.5
12.6
9.9
3.5
2.5
2.0
1.5
1.0
37.3
16.5
13.6
10.8
9.5
C
L = 15 pF
L = 1 MΩ
Figures
1, 2
6
R
5
4
8.7
tPHL
tPLH
Propagation Delay
32
13
9
1.10 ≤ VCC ≤ 1.30
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
0
5.0
4.0
3.0
2.0
1.5
31.6
17.8
14.4
11.3
9.2
4.0
3.5
2.0
1.5
1.0
46.3
18.2
15.9
12.8
10.7
C
L = 30 pF
L = 1 MΩ
Figures
1, 2
7
R
6
5
CIN
Input Capacitance
Output Capacitance
Power Dissipation
Capacitance
2.0
4.0
pF
pF
COUT
CPD
0
VI = 0V or VCC
f = 10 MHz
,
0.9 to 3.60
8
pF
www.fairchildsemi.com
4
Preliminary
AC Loading and Waveforms
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
VCC
Symbol
3.3V ± 0.3V
1.5V
2.5V ± 0.2V
1.8V ± 0.15V
VCC/2
1.5V ± 0.10V
1.2V ± 0.10V
VCC/2
0.9V
VCC/2
VCC/2
Vmi
VCC/2
VCC/2
VCC/2
VCC/2
Vmo
1.5V
VCC/2
VCC/2
5
www.fairchildsemi.com
Preliminary
Tape and Reel Specification
TAPE FORMAT for SC70
Package
Tape
Section
Number
Cavities
125 (typ)
3000
Cavity
Status
Empty
Filled
Cover Tape
Status
Designator
Leader (Start End)
Carrier
Sealed
P6X
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
www.fairchildsemi.com
6
Preliminary
Tape and Reel Specification (Continued)
TAPE FORMAT for MicroPak
Package
Tape
Section
Number
Cavities
125 (typ)
5000
Cavity
Status
Empty
Filled
Cover Tape
Status
Designator
Leader (Start End)
Carrier
Sealed
L6X
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
REEL DIMENSIONS inches (millimeters)
Tape
Size
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165 0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(W1 + 2.00/−1.00)
8 mm
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00)
(14.40)
7
www.fairchildsemi.com
Preliminary
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
www.fairchildsemi.com
8
Preliminary
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak, 1.0mm Wide
Package Number MAC06A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
9
www.fairchildsemi.com
相关型号：
©2020 ICPDF网 联系我们和版权申明