GS-12-0974 [FCI-CONNECTOR]
TRX10GDP0310C1 (SFP+ LR Module); TRX10GDP0310C1 ( SFP + LR模块)型号: | GS-12-0974 |
厂家: | FCI CONNECTOR |
描述: | TRX10GDP0310C1 (SFP+ LR Module) |
文件: | 总14页 (文件大小:247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
1 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Product Specification
10 GBd SFP+ 1310 nm Limiting Transceiver
TRX10GDP0310C1
Product Features:
Hot pluggable SFP+ optical transceiver
Data rate transparent from 9.95 to 11.3 Gbps
Low power consumption, 0.8 W typ.
Excellent EMI performance
Transmission distance up to 10 km SM fiber
0 °C to +70 °C case operating temperature
1310 nm DFB laser
Duplex LC connector
Laser Class 1
RoHS 6/6 compliant
Applications:
10G Ethernet 10GBASE-LR/LW
10G Fibre Channel 1200-SM-LL-L
FCI’s SFP+ optical transceiver TRX10GDP0310C1 is compliant with the SFP+ MSA specifications
(SFF-8431 and SFF-8432) and with 10GBASE-LR/LW per IEEE 802.3 as well as 1200-SM-LL-L
per 10G Fibre Channel. It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1
safety compliant per IEC/CDRH. The sub-Watt power consumption and the excellent EMI
performance allow system design with high port density.
Supported Standards
Application
Standard
Data Rate
10G Ethernet LAN/WAN
IEEE 802.3 10GBASE-LR/LW
10.3125 / 9.953 Gbps
10G Fibre Channel
1200-SM-LL-L
10.518 Gbps
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
2 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Table of Contents
Table of Contents ......................................................................................................................................... 2
Functional Description................................................................................................................................. 3
Electrical Characteristics............................................................................................................................. 4
Absolute Maximum Ratings......................................................................................................................... 4
Recommended Operating Conditions.......................................................................................................... 4
Low Speed Characteristics.......................................................................................................................... 4
SFI Module Transmitter Input Characteristics.............................................................................................. 5
SFI Module Receiver Output Characteristics............................................................................................... 5
Optical Characteristics................................................................................................................................. 6
General Parameters.................................................................................................................................... 6
Optical Transmitter...................................................................................................................................... 6
Optical Receiver.......................................................................................................................................... 6
Application Information................................................................................................................................ 7
Connector Pinout......................................................................................................................................... 7
Electrical Pin Definition................................................................................................................................ 7
Application Schematics ............................................................................................................................... 8
Interfacing the Transceiver.......................................................................................................................... 9
Digital Optical Monitoring ............................................................................................................................ 9
Module Outline.......................................................................................................................................... 10
Module Safety & Compliance..................................................................................................................... 11
ESD & Electromagnetic Compatibility....................................................................................................... 11
Eye Safety ................................................................................................................................................... 12
Ordering Information.................................................................................................................................. 13
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
3 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Functional Description
The transmit path is based on an AC coupled 100 ohm differentially terminated driver coupled to a 1310 nm
DFB laser. Laser output may be disabled by pulling the transmitter disable (TX_DIS) line high which is its
default state when leaving the input floating due to an internal pull-up resistor. A fault condition is raised
upon detection of an abnormal laser state.
The receive path consists of a receiver optical sub-assembly (ROSA) for optical to electrical conversion,
followed by a limiting amplifier boosting the electrical signal. A loss of signal (LOS) status line provides
information to facilitate easy link detection.
Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via the
2-wire interface providing real time information about all important module parameters and status
information.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
4 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Electrical Characteristics
Absolute Maximum Ratings
Rating
Conditions
Symbol
Min
Max
Units
Storage Ambient Temperature
Powered Case Temperature
Operating Relative Humidity
Supply Voltage Range
-40
0
+85
+75
95
°C
°C
%
V
ϑstg
ϑc
RH
Non condensing
0
VCCT/R
-0.5
4.0
Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under
recommended operating conditions.
Recommended Operating Conditions
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Operating Case Temperature
Power Supply Voltage
0
+70
3.465
4.0
°C
V
ϑCase
VCCT/R
VCM
3.135
-0.5
3.30
DC Common Mode Voltage
SFI Signals
V
Low Speed Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Supply Current Transmitter
Supply Current Receiver
Total Supply Current
@ VCCT
@ VCCR
@ VCCT/R
IVCCTX
IVCCRX
IVCC
150
80
mA
mA
mA
W
300
1.0
0.4
Power Consumption
0.8
VOL
VOH
0
Host Vcc Range 2 V – 3.47 V,
OL_max = 4 mA
Host_
Vcc –
0.5
Host_
Vcc +
0.3
TX_Fault, RX_LOS
TX_Dis, RS0, RS1
I
VIL
VIH
-0.3
0.8
Low Voltage TTL
VccT +
0.5
VccT
* 0.3
VccT +
0.5
2.0
V
VIL
-0.3
VccT
* 0.7
VIH
Host Vcc Range 3.13 V – 3.47 V,
SCL, SDA
I
OL_max = 4 mA
VOL
0.0
0.4
Host_
Vcc –
0.5
Host_
Vcc +
0.3
VOH
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
5 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
SFI Module Transmitter Input Characteristics
Parameter
Nominal Data Rate
Conditions
Symbol
Min
Typ
Max
Units
10.3125
Gbd
Reference Differential Input
Impedance
Zd
100
Ω
Input AC Common Mode Input
Voltage
mV
(RMS)
0
25
Differential Input Voltage Swing
2 x |V(TD+) – V(TD-)|
0.01 – 4.1 GHz
VID
150
900
mV
dB
dB
1
)
2
Differential Input S-parameter
SDD11
4.1 – 11.1 GHz
)
Differential to Common Mode
Conversion 3)
0.01 – 11.1 GHz
SCD11
-10
dB
Total Jitter
TJ
DDJ
UJ
0.28 UI(p-p)
Data Dependent Jitter
Uncorrelated Jitter
0.1
UI(p-p)
RMS
0.023
1) Reflection coefficient given by equation SDD11(dB) < -12 + 2 x SQRT(f), with f in GHz.
2) Reflection coefficient given by equation SDD11(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz.
3) Common mode reference impedance is 25Ω.
SFI Module Receiver Output Characteristics
Parameter
Nominal Data Rate
Conditions
Symbol
Min
Typ
Max
Units
10.3125
Gbd
Reference Differential Output
Impedance
Zd
100
Ω
Termination Mismatch
∆Zd
5
%
mV
(RMS)
Output AC Common Mode Voltage
7.5
R
Load = 100 ohm,
Differential Output Amplitude
Output Rise and Fall Time
VOSPP
tR, tF
350
28
530
800
mV
2 x |V(RD+) – V(RD-)|
20 % to 80 %
ps
1
0.01 – 4.1 GHz
)
dB
Differential Output S-parameter
SDD22
SCC22
2
4.1 – 11.1 GHz
0.01 – 2.5 GHz
2.5 – 11.1 GHz
)
dB
dB
dB
3
)
Common Mode Output Return Loss4)
-3
Deterministic Jitter
Total Jitter
DJ
TJ
0.42 UI(p-p)
0.7 UI(p-p)
See SFP+ MSA
1) Reflection coefficient given by equation SDD22(dB) < -12 + 2 x SQRT(f), with f in GHz.
2) Reflection coefficient given by equation SDD22(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz.
3) Reflection coefficient given by equation SCC22(dB) = -7 + 1.6 x f, with f in GHz
4) Common mode reference impedance is 25Ω.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
6 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Optical Characteristics
General Parameters
Min Modal
Bandwidth
(MHz*km)
Typical
10GBd
Parameter
Conditions
Symbol
Min
Units
Operating Range
SMF
lOP
10
km
Optical Transmitter
Parameter
Center Wavelength
Conditions
Symbol
Min
1290
30
Typ
Max
Units
nm
1310
1330
λTRP
SMSR
Pavg
Side Mode Suppression Ratio
Average Launch Power
Optical Modulation Amplitude
Extinction Ratio
dB
-6.0
-5.2
3.5
-0.5
1
dBm
dBm
dB
POMA
ER
Relative Intensity Noise
RIN
-128
dB/Hz
Optical Receiver
Parameter
Center Wavelength
Conditions
Symbol
λC
Min
Typ
Max
1355
0.5
Units
nm
1260
1310
Average Input Power
Pavg
dBm
PRBS 231-1, BER < 1*10-12
@10.3125GBd
Receiver Sensitivity
PIN(OMA)
-18
-15
-15
dBm
PRBS 231-1, BER < 1*10-12
@ 10.3125GBd
Stressed Receiver Sensitivity
PIN(OMA)
-12
dBm
Assert
Pavg_as
POMA_deas
Hyst
-30
0.5
-21
-19
Loss of Signal
dBm
dB
De-Assert
-15
Loss of Signal Hysteresis
Note: The specified characteristics are met within the recommended range of operating. Unless otherwise noted, typical data are quoted
at nominal voltages and +25°C ambient temperature.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
7 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Application Information
Connector Pinout
Electrical Pin Definition
PIN
Logic
Symbol
Name / Description
Note
1
2
VeeT
Module Transmitter Ground
1
LVTTL-O
LVTTL-I
TX_Fault Module Transmitter Fault
3
TX_Dis
SDA
Transmitter Disable; Turns off transmitter laser output
2-Wire Serial Interface Data Line
4
LVTTL-I/O
LVTTL-I
2
2
5
SCL
2-Wire Serial Interface Clock
6
MOD_ABS (=MOD_DEF0) Module Absent, shorted to module ground
7
LVTTL-I
LVTTL-O
LVTTL-I
RS0
RX_LOS
RS1
Receiver Rate Select
8
Receiver Loss of Signal Indication Active LOW
Transmitter Rate Select
9
10
11
12
13
14
15
16
17
18
19
20
VeeR
VeeR
RD-
Module Receiver Ground
1
1
Module Receiver Ground
CML-O
CML-O
Receiver Inverted Data Output
Receiver Data Output
RD+
VeeR
VccR
VccT
VeeT
TD+
Module Receiver Ground
1
1
1
Module Receiver 3.3 V Supply
Module Transmitter 3.3 V Supply
Module Transmitter Ground
Transmitter Non-Inverted Data Input
Transmitter Inverted Data Input
Module Transmitter Ground
CML-I
CML-I
TD-
VeeT
1. Module ground pins Vee are isolated from the module case.
2. Shall be pulled up with 1k-10k ohms to a voltage between 3.13 V and 3.47 V on the host board.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
8 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Application Schematics
Recommended electrical connections to transceiver are shown below. Pull-ups: 1k – 10k ohms.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
9 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Interfacing the Transceiver
Communication is done by a serial 2-wire interface compatible to the I2C bus protocol. Refer to SFF-8472 for
a more detailed explanation of the registers:
Base Address A2h
Content
Base Address A0h
Content
Register
Register
Alarm & Warnings
Thresholds & Limits
External calibration
constants (not used)
Values from real time
diagnostic monitoring
Customer specific, writable
area
Serial Transceiver ID as
defined in SFP MSA
0 - 55
0 - 95
96 - 127
FCI Specific
Reserved
56 - 95
128 - 255
96 – 119
128 – 247
248 - 255
Reserved
Digital Optical Monitoring
The transceiver offers the ability to monitor important module parameter during operation. All five parameters
listed below are continuously monitored for getting information about the current module status. All data is
calibrated internally; there is no need for external post processing.
Temperature
Internally measured temperature data is represented as two’s complement of a signed 16-bit value in
increments of 1/256 °C over a range of -40 to +100 °C. Accuracy is better than +/-3 °C.
Supply Voltage (VCC)
Internally measured supply voltage. Represented as a 16-bit unsigned integer with the voltage defined as the
full 16 bit value (0 – 65535) with LSB equal to 100 µVolt, which yields to a total range of 0 to +6.55 Volts.
Accuracy is better than +/-3 %.
Laser Bias Current
The DFB laser bias current is represented as a 16 bit unsigned integer with the current defined as the full 16-
bit value (0 – 65535) with LSB equal to 2 µA. Accuracy is better than +/-10 %.
Optical Transmitter Power
TX output power measurement is based on internal monitor diode feedback. Represented as a 16-bit
unsigned integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 µW.
Accuracy is better than +/-3 dB over a range of Pavgmin to Pavgmax
.
Receiver Optical Power
RX input power measurement is based on photodiode average current. Represented as a 16-bit unsigned
integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 µW. Accuracy is
better than +/-3 dB over a range of -15 dBm to 0.5 dBm.
Note: The specified characteristics are met within the recommended range of operating conditions regarding temperature and voltage.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
10 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Module Outline
All dimensions shown are in millimeters.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
11 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Module Safety & Compliance
FCI’s SFP+ LR module is designed to meet international standards and requirements. The module is RoHS
compliant according to the European Parliament requirements on the restriction of the use of hazardous
substances in electrical and electronic equipment (RoHS). The module optical output power meets Class 1
requirements for laser safety.
Requirements
Standard
IEC 60950-1:2001
EN 60950-1:2001
Module Safety
RoHS 6/6 Directive 2002/95/EC
Amendment 4054 (2005/747/EC)
RoHS Compliance
CDRH 21 CFR 1040.10 and 1040.11 (according FDA)
IEC 60825-1 Rev2 2007 (according IEC)
Laser Safety (Class 1)
ESD & Electromagnetic Compatibility
Requirements
Standard
Value
FCC Part 15 B
EN 55022 Class B
CISPR 22
At least 6 dB
margin to
Class B limit
EMI (Emission)
30 MHz … 40 GHz
No bit errors
at sensitivity
limit
EMI (Immunity)
IEC 61000-4-3, 10 MHz … 1 GHz
≥ 2 kV
≥ 1 kV (SFI
signals)
EIA/JESD22-A114-B
MIL-STD 883C Method 3015.7
ESD (Electrical connector)
Air Discharge
EN61000-4-2, Criterion B
ESD (Module case)
ESD (Module case)
≥ 15 kV
≥ 8 kV
Contact Discharge
EN61000-4-2, Criterion B
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
12 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Eye Safety
This laser based singlemode transceiver is a Class 1 product. It complies with IEC 60825-1 Edition 2 and
FDA performance standards for laser products (21 CFR 1040.10 and 1040.11) except for deviations
pursuant to Laser Notice 50, dated July 26, 2001.
CLASS 1 LASER PRODUCT
To meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings.
Note: All adjustments have been made at the factory prior to shipment of the devices. No maintenance or
alteration to the device is required. Tampering with or modifying the performance of the device will result in
voided product warranty. Failure to adhere to the above restrictions could result in a modification that is
considered an act of “manufacturing”, and will require, under law, recertification of the modified product with
the U.S. Food and Drug Administration (ref. 21 CFR 1040.10 (i)).
LASER EMISSION DATA
Rx
Product Top View
Laser
Emission
Tx
Wavelength
1310 nm
Maximum total output power
15.6 mW / 11.9 dBm
(as defined by IEC: within 7 mm aperture at 70 mm distance)
Beam divergence (full angle) / NA (half angle)
11° / 0.1 rad
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
13 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
Ordering Information
Application
Standard
Part Number
TRX10GDP0310C1
TRX10GDP0310C1
10G Ethernet LAN/WAN
10G Fibre Channel
IEEE 802.3 10GBASE-LR/LW
10GFC 1200-SM-LL-L
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
NUMBER
TITLE
TYPE
GS-12-0974
Product Specification
PAGE
REVISION
DATE
14 of 14
A
AUTHORIZED BY
TRX10GDP0310C1 (SFP+ LR Module)
J. Blank
11 July 2011
CLASSIFICATION
UNRESTRICTED
REVISION RECORD
Rev Page
A
Description
EC#
Date
11 July 2011
Initial version.
PDS: RevC:oApyright © 2011 FCI Deutschland GmbH. FCI Deutschland GmbH reserves the right to make changes to this docuPmernitnatteandy t:imeJwaithnout0n3ot,ice2. 012
STATUS:Released
Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.
相关型号:
©2020 ICPDF网 联系我们和版权申明