KBPC3501MW [FCI-CONNECTOR]

Bridge Rectifier Diode, 35A, 100V V(RRM),;


型号：	KBPC3501MW
厂家：	FCI CONNECTOR
描述：	Bridge Rectifier Diode, 35A, 100V V(RRM),
文件：	总3页 (文件大小：287K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

KBPC-PF

Dimensions in mm

Mechanical Data

Feature

▓ Surge overload 400A

▓ Low forward voltage drop

▓ Mounting Position: Any

▓ Electrically isolated base-2000Volts

▓ Solderable 0.25" Faston Terminals

▓ Materials used carries U/L recognition

▓ Case: Molded plastic body over passivated junctions

▓ Polarity: Polarity symbols molded on body

▓ Terminals: Lead Solderable per MIL-STD-750

Method 2026

▓ MountingTorque: 5 in-lbs max

▓ Weight: 19.5 grams(Faston); 14.5grams(Wire Lead)

Max Ratings at Ta=25C Unless Otherwise Specified

Characteristic

KBPC3500~3510

3500 3501 3502 3504 3506 3508 3510

Unit

Symbol

Peak Repetitive Reverse Voltage

working Peak Reverse Voltage

DC Blocking Voltage

Vrrm

Vrwm

Vdc

100

200

140

200

400

280

400

600

420

600

800 1000

560 700

800 1000

Forward Continuous Current

IF(AV)

Peak Forward Surge Current 10ms Sine pulse,

rated Vrrm applied

400

1.0

IFSM

Max Forward Voltage IF=17.5A @25C

Reverse Leakage Current WITH Vr @ 25C/125C

5.0/500

Operating & Storage Temp. Range

Thermal Resistance Junction to Case

Thermal Resistance Case to Heatsink

Rating for fusing(t<8.3ms)

Tj/Ts

Rthja

Rthjc

-40 ~+125

2.6

C/W

2.3

I²t

374

Rating Characteristic Curves KBPC3500~3510(Ta=25C Unless otherwise noted)

FIG.1-MAXIMUM FORWARD SURGE CURRENT

FIG.2- DERATING CURVE OUTPUT

RECTIFIED CURRENT

600

500

400

300

200

100

150

NUMBER OF CYCLES AT 60Hz

CASE TEMPERATURE,

FIG.3-TYPICAL FORWARD CHARACTERISTICS

100

FIG.4-TYPICAL REVERSE CHARACTERISTICS

1.0

0.1

1.0

0.1

0.01

100

120 140

0.01

1.6

0.6

0.8

1.0

1.2

1.4

PERCENT OF RATED PEAK REVERSE VOLTAGE

INSTANTANEOUS FORWARD VOLTAGE,VOLTS

Case - Metal or Molded Plastic

AC In

Terminals - Plated .25" Faston or Plated Copper Wire

Leads .040" Diameter

Weight - 0.706 Ounces, 20 Grams

Mounting Position - Any with Bolt Down with Silicone

Thermal Compound Between Bridge and

Mounting Surface for Optimum Heat

Transfer

DC Out

Mounting Torque - 20 Inch Pound Max

Ordering Information

FCIS KBPC Series of Bridges Can Be Ordered with Options on Terminals and Case Materials.

How To Specify Case Material and Terminal Options:

n For Metal Case, Order Suffix (1) M

n For Plastic Case, Order Suffix (1) P

n For Faston Terminals, Order Suffix (2) F

n For Wire Lead Terminals, Order Suffix (2) W

KBPC Series Examples

To Order a 25 Amp, 400 Volt Bridge with Faston Leads and a Plastic Case:

Specify - KBPC2504PF . . . Where P = Plastic and F = Faston Terminals

To Order a 35 Amp, 800 Volt Bridge with Wire Leads and a Metal Case:

Specify - KBPC3508MW . . . Where M = Metal and W = Wire Leads (Terminals)

To Order a 15 Amp, 200 Volt, UL Recognized Bridge with Wire Leads and a Plastic Case:

Specify - KBPC1502PWU . . . Where P = Plastic and W = Wire Leads (Terminals) and U = UL Recognized

NOTE: Fast Recovery Bridges (Diodes) Are Available; Please Contact FCI Components.

KBPC - S Series Examples

To Order Bridges with the In-Line Pin Configuration, Select the Current and Voltage Desired and Add S as the Suffix, as

shown in the following example.

To Order a 35 Amp, 800 Volt Bridge with In-Line Wire Leads:

Specify - KBPC3508S . . . Where S = In-Line Wire Lead Terminals

相关型号：