F4P3225VT-100 [FENGJUI]

EMI SOLOTION PRODUCTS-RoHS;


型号：	F4P3225VT-100
厂家：	FENGJUI TECHNOLOGY CO., LTD.
描述：	EMI SOLOTION PRODUCTS-RoHS
文件：	总2页 (文件大小：158K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS

F4P3225VT TYPE

●FEATURE

1. For automobile signal line

2. Same as TDK ADL3225VT type

●Applications

1. Inductor for use with separate signal and power lines in in-vehicle PoC (Power Over Coax), etc

●Shape and Dimension and Schematics and Land Patterns(mm)

F4P3225VT (1210)

●Specification

Dimension in m/m

DC Resistance

(max.)

Isat Current

(mA) typ.

Irms Current

(mA) typ.

INDUCTANCE

(uH) ±20%

PART NO.

(ohm)

F4P3225VT-4R7

F4P3225VT-100

4.7uH at 100KHz

10uH at 100KHz

720

450

1500

1300

0.1

0.15

Note1. Measurement ambient temperature of electrical : at 20℃

Note2. Isat: DC current at which the inductance drops 30%(typ) from its value without current

Note3. Irms: Average current for 40℃ temperature rise from 25℃ ambient(typical)

Note4. Test equipment: HP4291A

Your Perfect Inductor

Rev.1801

FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS

GENERAL CHARACTERISTICS

1. Operating temperature range: -40 TO + 125℃(Includes temperature when the coil is heated)

2. External appearance: On visual inspection, the coil has no external defects.

3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y

withstanding at below conditions.

Terminal should not peel off. (refer to figure at right) 0.5kg Min –F4P3225VT.

4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core.

5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core.

6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃).

7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95%

relative humidity at 40 ±2℃and 1 hour drying under normal condition.

8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations

at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes.

9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock

attitude upon a rubber block method shock testing machine, in three different orientations.

10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow)

11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃)

Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range:

-35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH

12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use.

13. Reflow profile recommend:

Lead-free heat en duran ce test

Lead-free the recommended reflow condition

T( ℃ )

T(℃)

3 0 0

2 5 0

2 0 0

1 5 0

300

26 0 ℃

23 0℃

245℃ Peak

250

230℃

200

150

6 0

170±10℃,60-120S

1 0 0

5 0

100

T(s

T(s)

6 0

1 20

18 0

24 0

3 0 0

120

180

240

300

Your Perfect Inductor

Rev.1801

相关型号：