E64-3F4-A3150-E [FERROXCUBE]
Planar E cores and accessories; 平面E型磁芯及配件
| 型号： | E64-3F4-A3150-E |
| 厂家： | 
FERROXCUBE INTERNATIONAL HOLDING B.V. |
| 描述： | Planar E cores and accessories |
| 文件： | 总6页 (文件大小：53K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
E64/10/50
Planar E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
Planar E cores and accessories
E64/10/50
CORES
Effective core parameters of a set of E cores
64.0 1.3
53.8 1.1
handbook, halfpage
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
0.156
mm−1
40700 mm3
10.2
0.2
Σ(I/A)
Ve
effective volume
effective length
effective area
5.1 0.13
10.2
0.13
Ie
79.9
519
mm
mm2
mm2
g
Ae
R0.25 max. typ.
Amin
m
minimum area
mass of core half
519
≈ 100
50.8
1
CBW415
R0.64 ref. typ.
R0.81 ref. typ.
Dimensions in mm.
Fig.1 E64/10/50.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
0.136
mm−1
35500 mm3
Σ(I/A)
Ve
effective volume
effective length
effective area
minimum area
mass of plate
handbook, halfpage
64 1.3
Ie
69.7
519
519
≈ 78
mm
mm2
mm2
g
Ae
5.08 0.13
Amin
m
Ordering information for plates
GRADE TYPE NUMBER
3C90 PLT64/50/5-3C90
50.8
1
3C92
3C93
3C94
3C95
3F3
PLT64/50/5-3C92
PLT64/50/5-3C93
PLT64/50/5-3C94
PLT64/50/5-3C95
PLT64/50/5-3F3
PLT64/50/5-3F4
CBW416
R0.64 ref. typ.
3F4
Dimensions in mm.
Fig.2 PLT 64/50/5.
2008 Sep 01
2
Ferroxcube
Planar E cores and accessories
E64/10/50
Core halves for use in combination with an E core
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 100 30 N,
unless stated otherwise.
AL
(nH)
630 3%(1)
1000 3%(1)
1600 5%
TOTAL AIR GAP
GRADE
3C90
µe
≈ 78
TYPE NUMBER
(µm)
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C90-E630-E
E64/10/50-3C90-E1000-E
E64/10/50-3C90-A1600-E
E64/10/50-3C90-A2500-E
E64/10/50-3C90-A3150-E
E64/10/50-3C90
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1820
≈ 1390
≈ 1650
≈ 78
2500 10%
3150 10%
14640 25%
11200 25%
13300 25%
630 3%(1)
1000 3%(1)
1600 5%
3C92
3C93
3C94
≈ 0
E64/10/50-3C92
≈ 0
E64/10/50-3C93
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C94-E630-E
E64/10/50-3C94-E1000-E
E64/10/50-3C94-A1600-E
E64/10/50-3C94-A2500-E
E64/10/50-3C94-A3150-E
E64/10/50-3C94
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1820
≈ 2190
≈ 78
2500 10%
3150 10%
14640 25%
17890 25%
630 3%(1)
1000 3%(1)
1600 5%
3C95
3F3
≈ 0
E64/10/50-3C95
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F3-E630-E
E64/10/50-3F3-E1000-E
E64/10/50-3F3-A1600-E
E64/10/50-3F3-A2500-E
E64/10/50-3F3-A3150-E
E64/10/50-3F3
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1650
≈ 78
2500 10%
3150 10%
13300 25%
630 3%(1)
1000 3%(1)
1600 5%
3F4
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F4-E630-E
E64/10/50-3F4-E1000-E
E64/10/50-3F4-A1600-E
E64/10/50-3F4-A2500-E
E64/10/50-3F4-A3150-E
E64/10/50-3F4
≈ 124
≈ 199
≈ 310
≈ 391
≈ 860
2500 10%
3150 10%
6960 25%
Note
1. Measured in combination with an equal-gapped core half, clamping force for AL measurements, 100 30 N.
2008 Sep 01
3
Ferroxcube
Planar E cores and accessories
E64/10/50
Core halves for use in combination with a plate (PLT)
AL measured in combination with a plate (PLT), clamping force for AL measurements, 100 30 N.
AL
(nH)
AIR GAP
(µm)
GRADE
3C90
µe
≈ 78
TYPE NUMBER
630 3%
1000 3%
1600 5%
2500 10%
3150 10%
16540 25%
12700 25%
15050 25%
630 3%
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C90-A630-P
E64/10/50-3C90-A1000-P
E64/10/50-3C90-A1600-P
E64/10/50-3C90-A2500-P
E64/10/50-3C90-A3150-P
E64/10/50-3C90
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1790
≈ 1370
≈ 1630
≈ 78
3C92
3C93
3C94
≈ 0
E64/10/50-3C92
≈ 0
E64/10/50-3C93
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3C94-A630-P
E64/10/50-3C94-A1000-P
E64/10/50-3C94-A1600-P
E64/10/50-3C94-A2500-P
E64/10/50-3C94-A3150-P
E64/10/50-3C94
1000 3%
1600 5%
2500 10%
3150 10%
16540 25%
20150 25%
630 3%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1790
≈ 2150
≈ 78
3C95
3F3
≈ 0
E64/10/50-3C95
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F3-A630-P
E64/10/50-3F3-A1000-P
E64/10/50-3F3-A1600-P
E64/10/50-3F3-A2500-P
E64/10/50-3F3-A3150-P
E64/10/50-3F3
1000 3%
1600 5%
2500 10%
3150 10%
15050 25%
630 3%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 1630
≈ 78
3F4
≈ 1100
≈ 660
≈ 385
≈ 225
≈ 170
≈ 0
E64/10/50-3F4-A630-P
E64/10/50-3F4-A1000-P
E64/10/50-3F4-A1600-P
E64/10/50-3F4-A2500-P
E64/10/50-3F4-A3150-P
E64/10/50-3F4
1000 3%
1600 5%
2500 10%
3150 10%
7920 25%
≈ 124
≈ 199
≈ 310
≈ 391
≈ 860
2008 Sep 01
4
Ferroxcube
Planar E cores and accessories
E64/10/50
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
f = 100 kHz; f = 100 kHz;
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 100 kHz;
f = 400 kHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 100 mT;
= 200 mT;
= 200 mT;
= 50 mT;
B
B
B
B
T = 100 °C
T = 25 °C
T = 100 °C
T = 100 °C
E+E64-3C90
E+PLT64-3C90
E+E64-3C92
E+PLT64-3C92
E+E64-3C93
E+PLT64-3C93
E+E64-3C94
E+PLT64-3C94
E+E64-3C95
E+PLT64-3C95
E+E64-3F3
≥320
≥320
≥370
≥370
≥320
≥320
≥320
≥320
≥320
≥320
≥300
≥300
≥250
≥250
≤ 4.8
≤ 4.2
≤ 3.6
≤ 3.2
≤ 3.6(1)
≤ 3.2(1)
≤ 3.6
≤ 3.2
−
−
−
−
−
−
−
−
≤ 25
≤ 23
≤ 25(1)
≤ 23(1)
≤ 25
≤ 23
≤ 24.4
≤ 21.3
−
−
−
−
−
−
−
−
−
−
−
−
−
≤ 25.6
−
≤ 22.4
−
≤ 4.8
≤ 4.2
−
−
−
−
−
≤ 7.8
≤ 6.8
−
E+PLT64-3F3
E+E64-3F4
−
−
E+PLT64-3F4
−
−
−
1. Measured at 140 °C.
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 500 kHz;
f = 500 kHz;
f = 1 MHz;
f = 3 MHz;
GRADE
ˆ
ˆ
ˆ
ˆ
= 10 mT;
B
= 50 mT;
= 100 mT;
= 30 mT;
B
B
B
T = 100 °C
T = 100 °C
T = 100 °C
≤ 12
T = 100 °C
E+E64-3F4
≥250
≥250
−
−
−
−
≤ 20
E+PLT64-3F4
≤ 10.5
≤ 17
2008 Sep 01
5
Ferroxcube
Planar E cores and accessories
E64/10/50
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
6
相关型号：
©2020 ICPDF网 联系我们和版权申明