P22-3F3-A250 [FERROXCUBE]
P cores and accessories; P内核及配件型号: | P22-3F3-A250 |
厂家: | FERROXCUBE INTERNATIONAL HOLDING B.V. |
描述: | P cores and accessories |
文件: | 总4页 (文件大小:49K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FERROXCUBE
DATA SHEET
P22/13/I
P cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
P cores and accessories
P22/13/I
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
core factor (C1)
VALUE UNIT
15 0.4
handbook, halfpage
Σ(I/A)
Ve
0.450
2460
33.3
73.4
58.1
≈ 13
mm−1
mm3
mm
mm2
mm2
g
effective volume
effective length
effective area
minimum area
mass of set
Ie
0
0.8
18.2
0.3
3.8
0.6
0
0.3
Ae
22
9.4
Amin
m
0.6
0.13
9.2
13.4
+0.4/−0 0.2
MGB576
Dimensions in mm.
Fig.1 P22/13/I core set.
Core sets for general purpose transformers and power applications
Clamping force for AL measurements, 40 10 N.
AL
(nH)
AIR GAP
(µm)
GRADE
µe
≈ 90
TYPE NUMBER
3C81
250 3%
315 3%
400 3%
630 3%
≈ 420
≈ 320
≈ 250
≈ 145
≈ 85
P22/13/I-3C81-A250
P22/13/I-3C81-A315
P22/13/I-3C81-A400
P22/13/I-3C81-A630
P22/13/I-3C81-A1000
P22/13/I-3C81
≈ 114
≈ 144
≈ 227
≈ 361
≈ 1920
≈ 1920
≈ 90
1000 5%
5330 25%
5330 25%
250 3%
315 3%
400 3%
630 3%
≈ 0
3C91
3F3
≈ 0
P22/13/I-3C91
≈ 420
≈ 320
≈ 250
≈ 145
≈ 85
P22/13/I-3F3-A250
P22/13/I-3F3-A315
P22/13/I-3F3-A400
P22/13/I-3F3-A630
P22/13/I-3F3-A1000
P22/13/I-3F3
≈ 114
≈ 144
≈ 227
≈ 361
≈ 1470
1000 5%
4070 25%
≈ 0
2008 Sep 01
990
Ferroxcube
P cores and accessories
P22/13/I
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
B = 200 mT;
T = 100 °C
f = 100 kHz;
B = 100 mT;
T = 100 °C
f = 100 kHz;
B = 200 mT;
T = 100 °C
f = 400 kHz;
B = 50 mT;
T = 100 °C
GRADE
ˆ
ˆ
ˆ
ˆ
3C81
3C91
3F3
≥320
≥315
≥315
≤ 0.57
−
−
≤ 0.92(1)
−
−
−
−
−
≤ 0.13(1)
≤ 0.27
≤ 0.47
Note
1. Measured at 60 °C.
BOBBINS AND ACCESSORIES
Coil formers, winding data and mounting parts are equal to those of “P22/13”, but “area product” is different.
Winding data and area product (for P22/13/I) for CP-P22/13 coil former
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
AVERAGE
LENGTH OF
TURN
AREA
PRODUCT
Ae x Aw
(mm4)
NUMBER OF
SECTIONS
TYPE NUMBER
(mm)
(mm)
1
2
3
26.2
7.5
44.5
44.5
44.5
1920
CP-P22/13-1S
2 × 12.2
3 × 7.6
2 × 3.45
3 × 2.1
2 x 895
3 x 558
CP-P22/13-2S
CP-P22/13-3S
Winding data and area product (for P22/13/I) for 6-pins P22/13 coil former for PCB mounting
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
AVERAGE
LENGTH OF LENGTH OF PRODUCT
MINIMUM
AREA
NUMBER
OF
SECTIONS
TYPE NUMBER
TURN
(mm)
PINS
(mm)
Ae x Aw
(mm4)
(mm)
1
1
2
2
3
3
25.2
7.8
44.5
44.5
44.5
44.5
44.5
44.5
4.4
6.8
4.4
6.8
4.4
6.8
1850
1850
CPV-P22/13-1S-6PD
CPV-P22/13-1S-6PDL
CPV-P22/13-2S-6PD
CPV-P22/13-2S-6PDL
CPV-P22/13-3S-6PD(1)
CPV-P22/13-3S-6PDL(1)
25.2
7.8
2 × 11.7
2 × 11.7
3 × 7.03
3 × 7.03
2 × 3.6
2 × 3.6
3 × 2.2
3 × 2.2
2 x 859
2 x 859
3 x 516
3 x 516
Note
1. In accordance with “UL 94-HB”.
2008 Sep 01
991
Ferroxcube
P cores and accessories
P22/13/I
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Prototype
Design-in
Preferred
These products are recommended for new designs.
These products are recommended for use in current designs and are available via our
sales channels.
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
Support
2008 Sep 01
992
相关型号:
©2020 ICPDF网 联系我们和版权申明