FLUKE-123B_技术文档

TECHNICAL DATA

Fluke 120B Series Industrial

®

ScopeMeter Hand-Held Oscilloscopes

Simplified testing, more insight and faster

electro-mechanical troubleshooting

The compact ScopeMeter^®120B Series, is the rugged oscilloscope

solution for industrial electrical and electro-mechanical equip-

ment troubleshooting and maintenance applications. It’s a truly

integrated test tool, with oscilloscope, multimeter and high-speed

recorder in one easy-to-use instrument. The ScopeMeter 120B

Series also integrates with Fluke Connect^®mobile app and

FlukeView^®for ScopeMeter software to enable further collabora-

tion, data analysis and archiving of critical test information.

The 120B Series Industrial ScopeMeter Test Tools include innova-

tive functions designed to help technicians troubleshoot faster and

get the answers they need to keep their systems up and running.

Display waveforms with Connect and View™ trigger and setup

technology and automatically view related numerical measure-

ments using Fluke IntellaSet™ technology, all without making

manual measurement adjustments. With Recorder Event Detect

capabilities, elusive intermittent events are captured and logged

for easy viewing and analysis.

• Dual-input digital oscilloscope and multimeter

• 40 MHz or 20 MHz oscilloscope bandwidth

• Two 5,000-count true-rms digital multimeters

• Connect-and-View™ trigger simplicity for hands-off operation

• IntellaSet™ technology automatically and intelligently adjusts

numerical readout based on the measured signal

• Dual-input waveform and meter reading recorder for

KEY MEASUREMENTS

Voltage, current and power waveforms

with numerical values including harmonics,

resistance, diode, continuity and

capacitance measurements.

trending data over extended periods

• Recorder Event Detect captures elusive intermittent signals on

repetitive waveforms up to 4 kHz

AUTOMATICALLY CAPTURE, VIEW AND

ANALYZE COMPLEX WAVEFORMS

Fluke Connect and View_™triggering

automatically displays waveforms without

having to adjust amplitude, timebase and

trigger settings, while Intellaset_™technology

analyzes the signal and automatically

displays critical numerical readings, making

troubleshooting faster than ever.

FLUKE CONNECT^®COMPATIBLE*

View data locally on the instrument,

or via Fluke Connect mobile app.

*Not all models are available in all countries.

Check with your local Fluke representative.

• Shielded test leads for oscilloscope, resistance and

continuity measurements

• Resistance, continuity, diode and capacitance meter

measurements

• Power measurements (W, VA, VAR, PF, DPF, Hz)

• Voltage, current and power harmonics

• Check Industrial networks with BusHealth physical layer tests

against defined reference levels

• Save or recall data and instrument setups

• Store instrument setups defined by a test sequence for routine

maintenance or most often used test procedures.

• External optically isolated USB interface to transfer, archive

and analyze scope or meter data

• Optional WiFi adapter connected to internal USB port to

wirelessly transfer information to the PC, laptop or

Fluke Connect^®mobile app*

• FlukeView^®ScopeMeter^®Software for Windows^®

• Rugged design to withstand 3g Vibration, 30g shock, and

rated IP51 according to EN/IEC60529

• Highest safety rating in the industry: safety rated for

CAT IV 600 V

• Li-Ion rechargeable battery, seven-hours operation (with

four-hour charge time)

*Not all models are available in all countries. Check with

your local Fluke representative.

™

Connect-and-View™

IntellaSet /AutoReading

triggering for an instant,

The Auto Readings function

with Fluke IntellaSet™ technol-

ogy uses proprietary algorithms

to intelligently analyze the

measured waveform and auto-

matically displays the most

appropriate numerical measure-

ments on screen, so you can get

the data you need easier than

ever before. As an example,

when the measured wave-

form is a line voltage signal,

the Vrms and Hz readings

stable display

Oscilloscope users know how

difficult triggering can be.

Using the wrong settings can

lead to unstable waveform

captures, and sometimes the

wrong measurement data.

Fluke’s unique Connect-and-

View™ triggering technology

recognizes signal patterns, and

automatically sets up the correct

triggering to provide a stable,

reliable and repeatable display.

Connect-and-View™ triggering

is designed to work with virtu-

ally any signal, including motor

drives and control signals—

without adjusting parameters,

or even touching a button.

Signal changes are instantly

recognized and settings are

automatically adjusted, provid-

ing a stable display even when

measuring multiple test points

in quick succession.

are automatically displayed,

whereas if the measured

waveform is a square wave, the

Vpeak-peak and Hz readings

are automatically displayed.

Using IntellaSet™ technology

in conjunction with Connect-

and-View™ automatic triggering

you can be sure you’re seeing

not only the correct wave-

form, but the appropriate

Fluke Connect-and-View™ triggering

with Auto Reading function using Fluke

IntellaSet™ technology gives you quick

access to the data you need.

numerical reading as well. All

without touching a button.

2 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Industrial equipment needs a reliable power supply to

operate properly, use the dual input to obtain key power

measurements.

For single phase or 3-phase balanced systems, the dual inputs

of the Industrial ScopeMeter^®120B Series can measure ac+dc

rms voltage on channel A and ac+dc rms current on channel

B. The Fluke 125B can then calculate; frequency, phase angle,

active power (kW), reactive power (VA or var), power factor (PF)

or displacement power factor (DPF) and can also calculate the

power values for a 3-phase system where all phases have equal

voltage and currents. This applies to both balanced system and

resistive loads.

Easily obtain key power characteristics to validate a system

power.

Harmonics measurements

Harmonics are periodic distortions of voltage,

current, or power sine waves. Harmonics in

power distribution systems are often caused

by non-linear loads such as switched mode

dc power supplies and adjustable speed motor

drives. Harmonics can cause transformers,

conductors, and motors to overheat. In the

Harmonics function, the Test Tool measures

harmonics to the 51st. Related data such as dc

components, THD (Total Harmonic Distortion),

and K factor are measured to provide a com-

plete insight in to the electrical state of health

of your loads.

®

FlukeView ScopeMeter

®

Software for Windows

Get more out of your ScopeMeter

120B with FlukeView^®Software:

• Store instrument’s screen

copies on the PC, in color

Harmonic spectrum overview with cursors

to measure the distortion as a percentage

of the fundamental.

• Copy screen images into your

reports and documentation

• Capture and store waveform

data from your ScopeMeter

on your PC

• Create and archive wave-

form references for easy

comparison

• Copy waveform data into

your spreadsheet for detailed

analysis

One test lead to measure multiple

electrical parameters

High frequency waveform, meter, capacitance and

resistance measurements as well as continuity

checks are all covered by single set of shielded

test leads. No time is wasted finding or swapping

leads.

• Use cursors for parameter

measurement

• Add user text to instrument

setups and send them to the

instrument for operator refer-

ence and instructions

A single test tool measures volts, ohms,

amps or capacitance, in addition to

displaying waveforms.

3 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Quickly step through recorded events

to identify and troubleshoot intermittent

faults.

Quickly understand industrial ﬁeld bus

signal physical layer analog characteristics.

Fluke Connect mobile app

compatibility

Use the comprehensive

Industrial Bus Health Test

verifies electrical signal

recorder modes to help find

intermittent faults with ease quality on industrial buses

Automated industrial machinery

is harder than ever to trouble

shoot. It’s not enough to just

know where you have to test,

you also have to know what to

look for—and that can be hard

without baseline measurement

data or access to subject matter

experts. The Fluke Connect^®

Assets wireless system of

software and wireless test tools

enables technicians to reduce

maintenance costs and increase

uptime with accurate equip-

ment records and maintenance

data that is easy to interpret,

and share. Compare and

The toughest faults to find are

those that happen only once

in a while—intermittent events.

They can be caused by bad

connections, dust, dirt, corro-

sion or simply broken wiring

or connectors. Other factors,

like line outages and sags or

the starting and stopping of

a motor, can also cause inter-

mittent events resulting in

Bus Health Test analyzes the

electrical signals on the indus-

trial bus or network and gives

a clear “Good”, “Weak” or “Bad”

indication mark for each of the

relevant parameters, presented

next to the actual measurement

value. Measured values are

compared to standard values

based on the selected bus types

(CAN-bus, Profi-bus, Foundation

Field, RS-232 and many more),

or, unique reference values

equipment shutdowns. When

these events happen, you may

not be around to see it. But,

your Fluke ScopeMeter^®Test

Tool will. You can either plot the

minimum and maximum peak

measurement values or record

the waveform trace. And, with

expandable micro SD memory,

recording sessions can be done

for up to 14 days. This recorder

is even more powerful with

the addition of Recorder Event

Detect, which makes detect-

ing and logging intermittent

can be set if different toler-

ances are required. The Fluke

125B can validate the quality

of the electrical signals as soon

as they are passed along the

network, without looking at the

data content. Additionally, the

125B checks the signal levels

and speed, transition times and

distortion, and compares these

to the appropriate standards

to help you find errors such as

improper cable connections, bad

contrast test point measure-

ment data and trends so you

can better understand signal

characteristics and changes

over time. And, by storing

maintenance data on the Fluke

™

Cloud you can enable team

members to access it from

wherever and whenever they

need to so you can get advice

or approvals in the field and

get your systems up and run-

ning faster than ever before.

faults easier than ever. Just set a contacts, incorrect grounding or

threshold on a meter reading or

scope trace and deviations are

tagged as unique events. You no

longer need to search through

masses of data to pinpoint faults,

and can quickly step from one

tagged event to the next, while

still having access to the full

data set.

improper terminators.

4 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Specifications

Oscilloscope mode

Vertical

Frequency response - dc coupled without probes and test leads (with BB120)

123B: dc to 20 MHz (-3 dB)

124B and 125B: dc to 40 MHz (-3 dB)

with STL120-IV 1:1 shielded test leads

with VP41 10:1 Probe

DC to 12.5 MHz (-3 dB) / dc to 20 MHz (-6 dB)

123B: dc to 20MHz (-3 dB)

124B and 125B: dc to 40 MHz (-3 dB)

Frequency response - ac coupled

(lf roll off)

without probes and test leads

with STL120-IV 1:1 shielded test leads

with VP41 10:1 Probe

<10 Hz (-3 dB)

Rise time, excluding probes,

test leads

123B <17.5 ns

124B and 125B <8.75 ns

Input impedance

without probes and test leads

with BB120

1 MΩ//20 pF

1 MΩ//24 pF

1 MΩ//230 pF

5 MΩ//15.5 pF

with STL120-IV 1:1 shielded test leads

with VP41 10:1 Probe

5 mV to 200 V/div

Sensitivity

Analog bandwidth limiter

Display modes

10 kHz

A, -A, B, -B

Max. input voltage A and B

direct, with test leads, or with VP41 Probe

with BB120

600 Vrms CAT IV, 750 Vrms maximum voltage.

600 Vrms

Max. floating voltage, from any

terminal to ground

600 Vrms CAT IV, 750 Vrms up to 400Hz

Horizontal

Scope modes

Ranges (Normal)

Normal, Single, Roll

Equivalent sampling

123B: 20 ns to 500 ns/div,

124B and 125B: 10 ns to 500 ns/div

1 μs to 5 s/div

Real time sampling

Single (real time)

1 μs to 5 s/div

Roll (real time)

1s to 60 s/div

Sampling rate (for both channels

simultaneously)

Equivalent sampling (repetitive signals)

Real time sampling 1 μs to 60 s/div

up to 4 GS/s

40 MS/s

Trigger

Screen update

Source

Free run, on trigger

A, B

Sensitivity A and B

@ DC to 5 MHz

@ 40 MHz

0.5 divisions or 5 mV

123B: 4 divisions

124B and 125B: 1.5 divisions

123B: N/A

@ 60 MHz

124B and 125B: 4 divisions

Slope

Positive, negative

Normal

Advanced scope functions

Display modes

Captures up to 25 ns glitches and displays

analog-like persistence waveform.

Smooth

Suppresses noise from a waveform.

Glitch off

Envelope

Does not capture glitches between samples

Records and displays the minimum and

maximum of waveforms over time.

Auto set (Connect-and-View™)

Continuous fully automatic adjustments of amplitude, time base, trigger levels, trigger gap, and

hold-off. Manual override by user adjustment of amplitude, time base, or trigger level.

5 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Dual input meter

The accuracy of all measurements is within (% of reading + number of counts) from 18 °C to 28 °C.

Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage measurements with 10:1 probe, add probe

uncertainty +1 %. More than one waveform period must be visible on the screen.

Input A and input B

DC voltage (VDC)

Ranges

500 mV, 5 V, 50 V, 500 V, 750 V

(0.5 % +5 counts)

Accuracy

Common mode rejection (CMRR)

Full scale reading

>100 dB @ dc, >60 dB @ 50, 60, or 400 Hz

5000 counts

True-rms voltages (V ac and V ac+dc)

Ranges

500 mV, 5 V, 50 V, 500 V, 750 V

Accuracy for 5 % to 100 % of

range (DC coupled)

DC to 60 Hz (V ac+dc)

1 Hz to 60 Hz (V ac)

60 Hz to 20 kHz

(1 % +10 counts)

(2.5 % +15 counts)

Accuracy for 5 % to 100 % of

range (AC or dc coupled)

DC rejection (only VAC)

>50 dB

Common mode rejection (CMRR)

>100 dB @ dc

>60 dB @ 50, 60, or 400 Hz

Full scale reading

Peak

5000 counts, reading is independent of any signal crest factor.

Modes

Max peak, Min peak, or pk-to-pk

500 mV, 5 V, 50 V, 500 V, 2200 V

Ranges

Accuracy

Accuracy Max peak or Min peak

Accuracy Peak-to-Peak

500 counts

5 % of full scale

10 % of full scale

Full scale reading

Frequency (Hz)

Ranges

123B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz,1 MHz, 10 MHz, and 50 MHz

124B and 125B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz, 10 MHz, and 70 MHz

15 Hz (1 Hz) to 50 MHz in continuous autoset

Frequency range

Accuracy @1 Hz to 1 MHz

Full scale reading

RPM

(0.5 % +2 counts)

10 000 counts

Max reading

50.00 kRPM

Accuracy

(0.5 % +2 counts)

Duty cycle (PULSE)

Range

2 % to 98 %

Frequency range

Pulse width (PULSE)

Frequency range

15 Hz (1 Hz) to 30 MHz in continuous autoset

1000 counts

Full scale reading

Amperes (AMP)

With current clamp

Ranges

same as V dc, V ac, V ac+dc, or PEAK

Scale factors

0.1 mV/A, 1 mV/A, 10 mV/A, 100 mV/A, 400 mV/A,

1 V/A, 10 mV/mA

Accuracy

same as V dc, V ac, V ac+dc, or PEAK

(add current clamp uncertainty)

6 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Temperature (TEMP) with optional temperature probe

Range

200 °C/div (200 °F/div)

Scale factor

Accuracy

1 mV/°C and 1 mV/°F

as V dc (add temp. probe uncertainty)

Decibel (dB)

0 dBV

1 V

0 dBm (600 Ω /50 Ω)

dB on

1 mW referenced to 600 Ω or 50 Ω

V dc, V ac, or Vac+dc

1000 counts

Full scale reading

Crest factor (CREST)

Range

1 to 10

Full scale reading

Phase

90 Counts

Modes

A to B, B to A

0 to 359 degrees

1 degree

Range

Resolution

Power (125B only)

Configurations

1 phase / 3 phase 3 conductor balanced loads (3 phase: fundamental component only, AUTOSET

mode only)

Power factor (PF)

Watt

Ratio between watts and VA range - 0.00 to 1.00

RMS reading of multiplying corresponding samples of input A (volts) and input B (amperes)

Full scale reading

Vrms x Arms

999 counts

VA

Full scale reading

√((VA)²-W²)

VA reactive (var)

Full scale reading

Vpwm

Purpose

Principle

to measure on pulse width modulated signals, like motor drive inverter outputs

readings show the effective voltage based on the average value of samples over a whole number of

periods of the fundamental frequency

Accuracy

as Vrms for sinewave signals

Input A to common

Ohm (Ω)

Ranges

123B and 124B

500 Ω , 5 kΩ, 50 kΩ, 500 kΩ, 5 MΩ, 30 MΩ

125B

50 Ω, 500 Ω , 5 kΩ, 50 kΩ, 500 kΩ, 5 MΩ, 30 MΩ

Accuracy

(0.6 % + 5 counts) 50 Ω (2 % + 20 counts)

50 Ω to 5 MΩ - 5000 counts, 30 MΩ - 3000 counts

0.5 mA to 50 nA, decreases with increasing ranges

<4 V

Full scale reading

Measurement current

Open circuit voltage

Continuity (Cont)

Beep

<(30 Ω 5 Ω) in 50 Ω range

Measurement current

Detection of shorts of

Diode

0.5 mA

≥1 ms

Measurement voltage

@0.5 mA

>2.8 V

<4 V

@open circuit

0.5 mA

Measurement current

Polarity

+ on input A, - on COM

7 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Capacitance (CAP)

Ranges

50 nF, 500 nF, 5 μF, 50 μF, 500 μF

5000 counts

Full scale reading

Measurement current

Advanced meter functions

Zero Set

500 nA to 0.5 mA, increases with increasing ranges

Set actual value to reference

AutoHold (on A)

Captures and freezes a stable measurement result. Beeps when stable. AutoHold works on the main

meter reading, with thresholds of 1 Vpp for AC signals and 100 mV for DC signals.

Fixed decimal point

Cursor Readout (124B and 125B)

Sources

Activated by using attenuation keys.

A, B

Single vertical line

Average, min and max readout

Average, min, max and time from start of readout (in ROLL mode; instrument in HOLD)

Min, max and time from start of readout (in RECORDER mode; instrument in HOLD)

Harmonics values in POWER QUALITY mode.

Dual vertical lines

Peak-peak, time distance and reciprocal time distance readout

Average, min, max and time distance readout (in ROLL mode; instrument in HOLD)

High, low and peak-peak readout

Dual horizontal lines

Rise or fall time

Transition time, 0 %-level and 100 %-level readout (manual or auto leveling; auto leveling only

possible in single channel mode)

Accuracy

As oscilloscope accuracy

Recorder

The recorder captures meter readings in Meter Recorder mode or continuously captures waveform samples in Scope Recorder mode. The

information is stored on internal memory or on optional SD card (with the 125B or 124B).

The results are displayed as Chart recorder display that plots a graph of min and max values of Meter measurements over time or as a

waveform recorder display that plots all the captured samples.

Meter readings

Measurement Speed

Maximum 2 measurements/s

2 M readings for 1 channel

2 weeks

Record Size (min, max, average)

Recorded Time Span

Maximum number of events

Waveform record

1024

Maximum sample rate

Size Internal memory

400 K sample/s

400 M samples Recorded Time

15 minutes at 500 μs/div

1.5 G samples

Span internal memory

Record Size SD card

11 hours at 20 ms/div

14 days at 20 ms/div

Recorded Time Span SD card

Maximum number of events

11 hours at 500 μs/div

64

8 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Power Quality (125B only)

Readings

Watt, VA, var, PF, DPF, Hz

250 W to 250 MW, 625 MW, 1.56 GW

when selected: total (%r)

when selected: fundamental (%f)

0.00 to 1.00

Watt, VA, var ranges (auto)

(2 % + 6 counts)

(4 % + 4 counts)

DPF

PF

0.00 to 1.00, 0.04

Frequency range

Number of Harmonics

10.0 Hz to 15.0 kHz

40.0 Hz to 70.0 Hz

DC to 51

Readings / Cursor readings

(fundamental 40 Hz to 70 Hz)

V rms / A rms /Watt

each harmonic from fundamental maybe selected

for individual readings

Includes frequency of fundamental, phase Angle and K-factor (in Amp and Watt)

Bus health tester (Fluke 125B only)

Type

Subtype

NEN-EN50295

ISO-11898

RS-422

RS-232

RS-485

H1

Protocol

AS-i

CAN

Interbus S

Modbus

EIA-422

RS-232/EIA-232

RS-485/EIA-485

61158 type 1, 31.25 kBit

EIA-485

Foundation Fieldbus

Profibus

DP

PA

61158 type 1

RS-232

EIA-232

EIA-485

RS-485

Miscellaneous

Display

Type

5.7-inch color active matrix TFT

640 x 480 pixels

Resolution

Waveform Display

Power

Vertical

10 div of 40 pixels

Horizontal

12 div of 40 pixels

External

via Power Adapter BC430

10 V DC to 21 V DC

Input voltage

Power consumption

Input connector

Internal

5 W typical

5 mm jack

via Battery Pack BP290

Rechargeable Li-Ion 10.8 V

7 hours with 50 % backlight brightness

Battery power

Operating time

Charging time

4 hours with test tool off,

7 hours with test tool on

Allowable ambient temp

0 to 40 °C (32 to 104 °F) during charging

Memory

Internal memory can store 20 data sets

(screen waveform and setup)

Micro SD card slot with optional SD card

(max size of 32 GB)

Mechanical

Size

259 mm x 132 mm x 55 mm

(10.2 in x5.2 in x 2.15 in)

Weight

1.4 kg (3.2 lb) including battery pack

9 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

Interface

Optically isolated

USB to PC/laptop

Transfer screen copies (bitmaps), settings and

data

OC4USB optically isolated USB adapter/cable,

(optional), using FlukeView^®software for

Windows^®.

Optional WiFi adapter

Fast transfer of screen copies (bitmaps), settings

and data to PC/laptop, tablet, smartphone, etc.

A USB port is provided for attaching the WiFi

dongle. Do not use the USB port with a cable for

safety reasons.

Environmental

Temperature

MIL-PRF-28800F, Class 2

Battery Operation

0 to 40 °C (32 to 104 °F)

0 to 50 °C (32 to 122 °F)

-20 to 60 °C (-4 to 140 °F)

noncondensing

95 %

Power Adapter Operation

Storage

Humidity (Operating)

@ 0 to 10 °C (32 to 50 °F)

@ 10 to 30 °C (50 to 86 °F)

@ 30 to 40 °C (86 to 104 °F)

@ 40 to 50 °C (104 to 122 °F)

@ -20 to 60 °C (-4 to 140 °F)

Operating at 3 km (10 000 feet)

Operating at 2 km (6 600 feet)

Storage

75 %

45 %

Storage

Altitude

noncondensing

CAT III 600 V

CAT IV 600 V

12 km (40 000 feet)

EMC electromagnetic

compatibility

International

IEC 61326-1: Industrial, CISPR 11:

Group 1, Class A

Korea (KCC)

USA (FCC)

Class A Equipment (Industrial Broadcasting &

Communication Equipment)

47 CFR 15 subpart B. This product is considered

an exempt device per clause 15.103.

Wireless radio with adapter

Frequency range

2412 MHz to 2462 MHz

<100 mW

Output power

Enclosure protection

Safety

IP51, ref: EN/IEC60529

General

IEC 61010-1: Pollution Degree 2

IEC 61010-2-033: CAT IV 600 V/CAT III 750 V

600 Vrms CAT IV for derating

600 Vrms for derating

Measurement

Max. input voltage input A and B

Direct on input or with leads

With Banana-to BNC Adapter BB120

Max. floating voltage from any terminal to ground 600 Vrms CAT IV, 750 Vrms up to 400 Hz

Fluke 123B

Fluke 124B

Fluke 125B

Functions

Full function dual input scope and meter

Oscilloscope bandwidth MHz

Meter and Scope Recorder

Scope cursor measurements

Power and harmonics measurements

Bus health

·

20

40

·

Included accessories

10:1 voltage probe

·

i400S AC Current Clamp

10 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes

1:23 PM

100%

Fluke 125B

A

VAC rms

1.268

99.8

B

VAC rms

Ordering information

Fluke-123B Industrial ScopeMeter^®Hand Held

Oscilloscope (20 MHz)

Fluke-123B/S Industrial ScopeMeter^®Hand Held

Oscilloscope (20 MHz)*

Fluke-124B Industrial ScopeMeter^®Hand Held

Oscilloscope (40 MHz)

Fluke-124B/S Industrial ScopeMeter^®Hand Held

Set up and sustain preventive maintenance practices with

ease to help you oversee your complex world with the Fluke

Oscilloscope (40MHz)*

Fluke-125B Industrial ScopeMeter^®Hand Held

®

Connect system of software and over 40 wireless test tools.

Oscilloscope (40MHz)

• Maximize uptime and make conﬁdent maintenance decisions with data

Fluke-125B/S Industrial ScopeMeter^®Hand Held

you can trust and trace.

Oscilloscope (40MHz)*

™

• Save measurements to the Fluke Cloud and associate with an asset so

your team can consult baseline, historical and current measurements

Includes: Li-Ion battery pack, charger/power

adapter, 2 shielded test leads with ground leads,

black test lead, red and blue hook clips, banana

to BNC adapter, and WiFi USB adapter**

from one location.

• Collaborate with ease by sharing your measurement data with team

members with ShareLive™ video calls and emails.

• Wireless one-step measurement transfer with AutoRecord™ measure-

ments eliminates transcription errors, clipboards, notebooks and multiple

spreadsheets.

*Fluke 120B/S versions also include soft carry case,

FlukeView™ for Windows^®software, magnetic hanger,

and screen protector.

• Generate reports with multiple measurement types to provide status or

next step recommendations.

Find out more and take a free trial at: ﬂukeconnect.com

Google and Android store images

**WiFi USB adapter NOT available in all countries. Check

with your local Fluke representative.

WiFi or cellular service is required to share data. Smart phone, wireless

service and data plan not included with purchase. First 5 GB of storage is

free. Phone support details can be viewed at ﬂuke.com/phones.

STL120-IV Shielded Test Lead Set 600 V CAT IV

HC120-II Set of 2 hook clips

BB120-II Set of 2 banana to BNC adapter

VPS41 Voltage probe set 40MHz 600 V CAT IV

C120B Soft Carrying Case For 120B Series

SP120B Screen Protector For 120B Series

SCC120B Accessory Kit 120B Series

Download the app at:

OC4USB Fluke OC4USB USB Interface Cable

Smartphone wireless service and data

plan not included with purchase.

Fluke 80i 110s Fluke 80i-110s AC/DC Current

Clamp

Fluke i1000s Fluke i1000s AC Current Probe

Fluke i1010 Fluke i1010 AC/DC Current Clamp

Fluke i200s Fluke i200s AC Current Clamp

Fluke-i3000s Fluke i3000s AC Current Clamp

Fluke Connect is not available in all countries.

Fluke i3000s Flex 24 Fluke i3000s Flex-24 AC

Current Clamp, 610 mm (24 in.)

Fluke i3000s Flex 36 Fluke i3000s Flex-36 AC

Current Clamp, 915 mm (36 in.)

Fluke i30s Fluke i30s AC/DC Current Clamp

Fluke-i310s Fluke i310s Current Probe

Fluke i400s Fluke i400s AC Current Clamp

Fluke i410 Fluke i410 AC/DC Current Clamp

Fluke i5S Fluke i5S AC Current Clamp

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

Fluke. Keeping your world

®

up and running.

In Europe/M-East/Africa +31 (0) 40 2675

200 or

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

Modification of this document is not permitted

Specifications subject to change without notice.

without written permission from Fluke Corporation. Printed in U.S.A. 1/2016 6006986b-en

11 Fluke Corporation Fluke 120B Series Industrial ScopeMeter^®Hand-Held Oscilloscopes


型号：	FLUKE-123B
厂家：	Fluke Corporation
描述：	ScopeMeterÂ® Hand-Held Oscilloscopes Dual-input digital oscilloscope and multimeter
文件：	总11页 (文件大小：2887K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FLUKE-123B [FLUKE]

相关型号：

FLUKE-123B/S

FLUKE-124B

FLUKE-124B/S

FLUKE-125B

FLUKE-125B/S

FLUKE233

FLUX-50

FLV

FLV102

FLV110

FLV110

FLV110