FC7ASBBMF21.888-T1 [FOX]

Parallel - Fundamental Quartz Crystal,;


型号：	FC7ASBBMF21.888-T1
厂家：	FOX ELECTRONICS
描述：	Parallel - Fundamental Quartz Crystal, 驱动晶体谐振器
文件：	总2页 (文件大小：182K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

7.5x5.0mm Ceramic SMD Crystal

C7AS

(Former FE)

DATASHEET



Tolerances down to ±30 PPM

Stabilities down to ±15 PPM

Temperature Ranges as wide as -40ºC to +85ºC

Available above 50MHz (3^rd& 5^thOvertone Modes)

DIMENSIONS (mm)

ELECTRICAL CHARACTERISTICS

PARAMETERS

MAX (unless otherwise noted)

6.000 ~ 160.000 MHz

Frequency Range

Frequency Tolerance @ 25ºC

Frequency Stability, ref @ 25ºC

Temperature Range

(See options on page 2)

(See options below)

Operating

Storage

(T_OPR

)

(See options below)

-40ºC ~ +85ºC

(T_STG

)

Shunt Capacitance (Co)

Load Capacitance (C_L)

Drive Level

5 pF

(See options on page 2)

0.5 mW

Aging per year

±5 PPM

Maximum Soldering Temp / Time

Moisture Sensitivity Level (MSL)

Termination Finish

Seal Method

Lead (Pb) Free

260ºC / 10 Seconds x 2

Au over Ni

Resin

Yes

RoHS/REACH Compliant

Yes

Frequency Range

(MHz)

Max ESR

Operating Mode

(Ω)

6.000 ~ 7.999

8.000 ~9.999

10.000 ~ 15.999

16.000 ~ 50.000

28.000 ~ 84.000

>84.000 ~ 160.000

Fundamental

3^rdOvertone

5^thOvertone

Available Operating Temperatures and Stabilities*

Operating

Temperature

0 ~ +70ºC

-10 ~+60ºC

-10 ~ +70ºC

-20 ~ +70ºC

-30 ~ +85ºC

-40 ~ +85ºC

±15PPM ±20PPM ±25PPM

±30PPM

±50PPM

Note: Dimensional drawing is for reference to critical

specifications defined by size measurements. Certain non-

critical visual attributes, such as side castellations, etc. may

vary.

Key: O=Available, X=Not Available, ∆=Consult Fox Technical Support

*Does not imply a stocked part.

Title/Description: C7AS Series Standard Specifications

Drawing Number: C7AS-DOC-1

Size: A

Part Number:

Cage: 61429

Draftsperson: MAJ

Approved: BEC

Revision Date: 10/24/2019

Page 1 of 2

7.5x5.0mm Ceramic SMD Crystal

C7AS

(Former FE)

DATASHEET

TAPE SPECIFICATIONS (mm)

REEL SPECIFICATIONS (mm)

Reel Qty

Ø1.5

4.0

8.0

7.5

16.0

2.3

-T1=1,000

-T2=2,000 Default

2.0

Ø13

Ø21

Ø80

Ø180

Ø250

17.5

2.0

AVAILABLE OPTIONS & PART IDENTIFICATION¹

Example: F C7AS C C L 40.0

C7AS

Model Number

40.0

Fox

Tolerance

Stability

Load

Operating

Temperature

Frequency

(MHz)

Capacitance²

B = ±50 PPM

C = ±30 PPM

B = ±50 PPM

C = ±30 PPM

D = ±25 PPM

E = ±20 PPM

F = ±15 PPM

E = 10 pF

G = 12 pF

J = 15 pF

L = 18 pF

M = 20 pF

C = 0 to +70ºC

D = -10 to +60ºC

E = -10 to +70ºC

F = -20 to +70ºC

K = -30 to +85ºC

M = -40 to +85ºC

Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.

Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance

Corporate Headquarters

5570 Enterprise Parkway

Fort Myers, FL 33905

Sales

Tech Support

1-888-GET-2-FOX (1-888-438-2369)

-Or-

1-239-693-0099

http://www.foxonline.com

http://foxonline.com/repdisty

http://foxonline.com/email

Product use: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information

in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the

described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained

herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any

particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not

convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme

environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly

affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.

Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service

marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners.

Title/Description: C7AS Series Standard Specifications

Drawing Number: C7AS-DOC-1

Size: A

Part Number:

Cage: 61429

Draftsperson: MAJ

Approved: BEC

Revision Date: 10/24/2019

Page 2 of 2

相关型号：