FC80TAAAF3.579545 [FOX]

Series - Fundamental Quartz Crystal, 3.579545MHz Nom,;


型号：	FC80TAAAF3.579545
厂家：	FOX ELECTRONICS
描述：	Series - Fundamental Quartz Crystal, 3.579545MHz Nom, 驱动晶体谐振器
文件：	总2页 (文件大小：136K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Resistance Weld Thru-Hole Crystal

C80T

(former HC80U)

DATASHEET

Page 1 of 2

•

Tolerances down to ±10 PPM

Stabilities down to ±5 PPM

Operating Temperature Range to -40ºC ~ +85ºC

•

C4ST STANDARD SPECIFICATIONS

PARAMETERS

MAX (unless otherwise noted)

Frequency Range

3.579545 ~ 200.0 MHz

(See options on page 2)

(See options below)

Frequency Tolerance @ 25ºC

Frequency Stability, ref @ 25ºC

Temperature Range

Operating

Storage

Shunt Capacitance (Co)

(TOPR

(TSTG

)

(See options below)

-40ºC ~ +85ºC

7pF

(See options on page 2)

Load Capacitance

Drive Level

(CL)

1.0 mW

Aging per year

±3 PPM

Maximum Soldering Temp / Time

Moisture Sensitivity Level (MSL)

Termination Finish

Seal Method

Lead (Pb) Free

260ºC / 10 Seconds

Au over Ni

Resistance Weld

Yes

RoHS Compliant

Yes

Frequency Range

(MHz)

All dimensions are in millimeters.

Operating

Mode

Max

ESR Ω

3.579545 ~ 4.0

>4.0 ~ 5.0

>5.0 ~ 6.0

>6.0 ~ 7.0

>7.0 ~ 8.0

>8.0 ~ 10.0

>10.0 ~ 11.0

>11.0 ~ 50.0

25.0 ~ 123.0

60.0 ~ 200.0

300

Fundamental

3rd OT

Note: Dimensional drawing is for reference to critical specifications defined by

size measurements. Certain non-critical visual attributes may vary.

250

180

120

100

5th OT

•Available Operating Temperatures and Stabilities*

Operating Temperature

±20 PPM

±25 PPM

±30 PPM

±50 PPM

±100 PPM

±5 PPM

±10 PPM

±15 PPM

0°C to +50°C

0°C to +70°C

-10°C to +60°C

-10°C to +70°C

-20°C to +70°C

-40°C to +85°C

Key: O=Available, X=Not Available

*Does not imply a stocked part.

Title / Description: C80T STANDARD SPECIFICATIONS

Drawing Number:

Size: A

Part Number: 101540

Cage: 61429

Draftsperson: MAJ

Approved: BEC

Revision Date: 04/10/2019

Resistance Weld Thru-Hole Crystal

C80T

(former HC80U)

DATASHEET

Page 2 of 2

Available

Options & Part I

dentification for Thru-Hole Crystal C80T¹

F C80T B A A M 122.88

C80T

122.88

FOX

Model

Number

Tolerance

A=100ppm

B=50ppm

C=30ppm

D=25ppm

E=20ppm

F=15ppm

H=10ppm

Stability

Load

Operating

Temperature

A=0 to +50C

C=0 to +70C

D=-10 to +60C

E=-10 to +70C

F=-20 to +70C

M=-40 to +85C

Frequency

Capacitance²

A=Series

A=100ppm

B=50ppm

C=30ppm

D=25ppm

E=20ppm

F=15ppm

H=10ppm

L=5ppm

(MHz)

G=12pF

L=18pF

M=20pF

¹Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.

²Listed load capacitances represent the most commonly used. Other load capacitances are available.

Contact Fox Technical Support for assistance

Corporate

Headquarters

5570 Enterprise Parkway

Fort Myers, FL 33905

Sales

Tech Support

http://www.FOXONLINE.com/email

1-888-GET-2-FOX (1-888-438-2369) or

1-239-693-0099

http://www.FOXONLINE.com/repdisty

http://www.FOXONLINE.com

PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox

Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to

change without notice. Performance specifications and the operating parameters of the described products are determined in the

independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein

is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox

Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights

of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics

or any third parties.

Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or

similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or

safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement

by Fox Electronics.

Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice.

Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or

their respective third party owners.

For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .

Title / Description: C80T STANDARD SPECIFICATIONS

Drawing Number:

Size: A

Part Number: 101540

Cage: 61429

Draftsperson: MAJ

Approved: BEC

Revision Date: 04/10/2019

相关型号：