FCABSFHBF36.999999 [FOX]

Quartz Crystal, 32MHz Min, 80MHz Max, 36.999999MHz Nom,;


型号：	FCABSFHBF36.999999
厂家：	FOX ELECTRONICS
描述：	Quartz Crystal, 32MHz Min, 80MHz Max, 36.999999MHz Nom, 驱动晶体谐振器
文件：	总2页 (文件大小：206K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

1.2x1.0mm Ceramic SMD Crystal CABS

DATASHEET

 Tolerances down to ±10 PPM

 Stabilities down to ±10 PPM

 Temperature Ranges as wide as -40ºC to +85ºC

• SPECIFICATIONS

MAX (unless otherwise noted)

PARAMETERS

Frequency Range

32.000 ~ 80.000 MHz

(See options on page 2)

(See options below)

Frequency Tolerance @ 25ºC

Frequency Stability, ref @ 25ºC

Temperature Range

Operating (TOPR

Storage (TSTG

Shunt Capacitance (C

)

(See options below)

-55ºC ~ +125ºC

2 pF

Load Capacitance (C_L)

Drive Level

(See options on page 2)

100 µW (10µW typical)

Aging per year

±3 PPM

Maximum Soldering Temp / Time

Moisture Sensitivity Level (MSL)

Termination Finish

260ºC / 10 Seconds x 2

Au over Ni

Yes

Lead (Pb) Free

RoHS/REACH Compliant

Yes

Frequency Range

(MHz)

32.000 ~ 32.999999

33.000 ~ 36.999999

37.000 ~ 80.000

Operating Mode

Fundamental

Max ESR Ω

100

Fundamental

•Available Operating Temperatures and Stabilities*

Operating

±10 PPM

±15 PPM

±20 PPM

±25 PPM

Temperature

-20 ~+70ºC

-30 ~+85ºC

-40 ~+85ºC

Key: O=Available, X=Not Available

*Does not imply a stocked part.

Note: Dimensional drawing is for reference to critical specifications defined by size measurements.

Certain non-critical visual attributes, such as side castellations, etc. may vary.

Title / Description: CABS SERIES STANDARD SPECIFICATIONS

Drawing Number: CABS-DOC-1

Size: A

Part Number:

Cage: 61429

Draftsperson: BEC

Approved: MAJ

Revision Date: 06/13/2019

Page 1 of 2

1.2x1.0mm Ceramic SMD Crystal CABS

DATASHEET

• TAPE SPECIFICATIONS (millimeters)

• REEL SPECIFICATIONS(millimeters)

Reel QTY

4.0

3.5

8.0

0.45 -T3 = 3,000

-T5 = 5,000

13

21

60

180

9.0

1.5

2.0

1.5

Available

Options & Part Identification for CABS*

F CABS F F D M 40.0

CABS

40.0

FOX

Model

Number

Tolerance

D = ±25 PPM

E = ±20 PPM

F = ±15 PPM

H = ±10 PPM

Stability

Load

Operating

Frequency

(MHz)

Capacitance¹

B = 6 pF

Temperature

F = -20 ~ +70ºC

K = -30 ~ +85ºC

M = -40 ~ +85°C

D = ±25 PPM

E = ±20 PPM

F = ±15 PPM

H = ±10 PPM

V = 7 pF

D = 8 pF

E = 10 pF

G = 12 pF

*Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.

Listed load capacitances represent the most commonly used. Other load capacitances are available.

Corporate Headquarters

5570 Enterprise Parkway

Fort Myers, FL 33905

Sales

Tech Support

http://www.FOXONLINE.com/email

1-888-GET-2-FOX (1-888-438-2369) or

1-239-693-0099

http://www.FOXONLINE.com

http://www.FOXONLINE.com/repdisty

PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole

discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance

specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way

when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied,

including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of

the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox

Electronics or any third parties.

Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where

the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox

Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.

Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and

service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners.

For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .