FXU-HC738-167.00_技术文档

Model: FXU-HC73 SERIES

HCMOS 7 x 5mm 3.3V Oscillator

Freq: 0.016 MHz to 167MHz

Rev. 7/21/2015

Features

ULTRA Low Jitter

Low Cost

XPRESS Delivery

Frequency Resolution to six decimal places

Stabilities to ± 20 PPM

-20 to +70°C or -40 to +85°C operating temperatures

Tri-State Enable / Disable Feature

Industry Standard Package, Footprint & Pin-Out

Fully RoHS compliant

Applications

 ANY application requiring a high

performance HCMOS oscillator

 SONET

Gold over Nickel Termination Finish

Serial ID with Comprehensive Traceability

 Ethernet

 Storage Area Network

 Broadband Access

V

DD

Enable / Disable

 Microprocessors / DSP / FPGA

 Industrial Controllers

 Test and Measurement Equipment

FOX

OUTPUT

X_PRESSO

ASICs

GND

For more information -- Click on the drawing

Contents

page

2

3

Description

Model Selection & Part Number Guide

Electrical Characteristic

Absolute Maximums

The Fox XPRESSO-ULTRA Crystal Oscillator is a

breakthrough in configurable Frequency Control

Solutions. X^PRESSO-ULTRA utilizes a family of

proprietary ASICs, designed and developed by Fox,

with a key focus on noise reduction technologies.

3

Output Wave Characteristics

Phase Noise

Jitter

Pin Assignment

Recommended Circuit

Reflow

Mechanical Drawing and Pad Layout

Tape and Reel Specification

Label

Traceability – LOT Number & Serial Identification

Mechanical Test

4

5

6

7

8

9

10

11

The 4^thorder Delta Sigma Modulator reduces noise to

the levels that are comparable to traditional Bulk

Quartz and SAW oscillators. The ASICs family has

the ability to select the output type and supply

voltage.

Other X^PRESSO Series Links

Fox Contact Information

With the X^PRESSO-ULTRA lead-time, low cost, low

noise, wide frequency range, excellent ambient

performance, X^PRESSO-ULTRA is an excellent choice

over the conventional technologies.

Finished X^PRESSO-ULTRA parts are 100% final

tested.

Page 1 of 11

Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554

An Integrated Device Technology, Inc. company FOXonline.com

FXU-HC73 Series

Model Selection Guide & Fox Part Number

STEP #1: Customer selects the Model Description and provides to Fox Customer Service

Model Description

FXU – H C 7 3 5 R – 156.25 Frequency (in MHz)

Resolutions to 6 places

past the decimal point

7 = 7 x 5mm

H = HCMOS

C = Ceramic

3 = 3.3 V

blank = -20°C to +70°C

R = -40°C to +85°C

0 = ± 100 PPM

5 = ± 50 PPM

6 = ± 25 PPM

X = HCMOS (comp 2^ndoutput)

8 = ± 20 PPM (-20°C to +70°C)

STEP #2: The Fox Customer Service team provides a customer specific Part Number

for use on their Bill Of Materials (BOM).

Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description)

(This will ensure receipt of the proper part)

855 – 156.25 – 3

The 1^stField

Product Code #

855 = FXU–HC7

855E = FXU-XC7

The 3^rdField

Fox Internally Generated Number

(If any specification changes,

the last digits change)

(The same specs for a different customer

also changes the last digits)

The 2^ndField

The Customer’s Frequency

This example, FXU-HC735R-156.25 = HCMOS Output, Ceramic, 7 x5mm Package, 3.3V,

±50 PPM Stability, -40 to +85°C Temperature Range, at 156.25 MHz

Page 2 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Electrical Characteristics

Maximum Value

Parameters

Frequency Range

Frequency Stability ¹

Symbol

Condition

(unless otherwise noted)

0.016 MHz to 167 MHz

100, 50, 25, 20²PPM

F_O

0.016 MHz to 167 MHz

T_O

Standard operating

Optional operating

Storage

-20°C to +70°C

-40°C to +85°C

-55°C to +125°C

Temperature Range

T_STG

V_DD

Supply Voltage

Standard

3.3 V ± 5%

0.016 to 62.5 MHZ

62.5+ to 167 MHz

98 mA

108 mA

Input Current _{(@ Standard Load)}

I_DD

Output Load

Standard

15 pF

10 mS

100 nS

1

Start-Up Time

T_S

Output Enable / Disable Time

Moisture Sensitivity Level

Termination Finish

MSL

JEDEC J-STD-20

Au

Note 1 – Stability is inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.

Note 2 –. ±20 PPM stability -20°C to +70°C only.

Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested)

Maximum Value

Parameters

Input Voltage

Symbol

V_DD

Condition

(unless otherwise noted)

–0.5V to +5.0V

–55°C to +105°C

–55°C to +125°C

125°C

Operating Temperature

Storage Temperature

Junction Temperature

ESD Sensitivity

T_AMAX

T_STG

HBM

Human Body Model

1 kV

Page 3 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Output Wave Characteristics

Maximum Value

(unless otherwise noted)

10%V_DD

Parameters

Low Output Voltage

Symbol

V_OL

Condition

0.016 MHz to 167 MHz

High Output Voltage

V_OH

90%V_DDMinimum

Output Symmetry

0.016 to to 167 MHz

45% ~ 55%

@ 50% V_P-PLevel (See Drawing Below)

Output Enable ^Note1_{(PIN # 1)}Voltage

Output Disable^Note1_{(PIN # 1)}Voltage

V_IH

V_IL

≥ 70% V_DD

≤ 30% V_DD

Cycle Rise Time

T_R

T_F

0.016 MHz to 167 MHz

2.5 nS

(10%~90%V_DD- See Drawing Below)

Cycle Fall Time

(90%~10%V_DD- See Drawing Below)

Rise Time / Fall Time Measurements

10% to 90%

0V to V_DD

30% to 70%

20% to 80%

70 - 30

Times

90% - 10%

Fall Time

80 - 20

Times

10% - 90%

Rise Time

Oscillator Symmetry

Off Time

On Time

1/2 Period

50% V_DD

Period

Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45

Page 4 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Phase Noise (typical measurements at 156.25 MHz)

.

Jitter is frequency dependent. Below are typical values at 156.25 MHz.

HCMOS Phase Jitter & Time Interval Error (TIE)

TIE (pS)

(sigma of jitter distribution)

Phase Jitter (pS)

Frequency

(12kHz to 20MHz)

156.25 MHz

0.26

1.7

Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; V_DD= 3.3V.

TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; V_DD= 3.3V.

Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)

HCMOS Random & Deterministic Jitter Composition

Total Jitter (Tj)

Random (Rj) Deterministic (Dj)

Frequency

(14 x Rj) + Dj

(pS RMS)

(pS P-P)

156.25 MHz

0.6

6.1

14.8

Rj and Dj, measured on LeCroy SDA-6000A Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.

Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)

Page 5 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Pin Description and Recommended Circuit

Pin #

Name

E / D 1

GND

Type

Logic

Ground

Output

Function

1

2

3

Enable / Disable Control of Output (0 = Disabled)

Electrical Ground for VDD

HCMOS Oscillator Output

Output

4

VDD 2

N. C.

Power

Hi Z

Power Supply Source Voltage

No Connection (Factory Use ONLY)

Test

Points

NOTES:

1

Includes pull-up resistor to V_DDto provide output when the pin (1) is No Connect.

Installation should include a 0.1µF bypass capacitor placed between V_DD

(Pin 4) and GND (Pin 2) to minimize power supply line noise.

2

4

1

E / D

V_DD

TP

N. C.

N. C

.

2

3

GND

Output

Terminations as viewed from the Top

NOTE: XPRESSO-Ultra HCMOS XOs are designed to

fit on Industry Standard, 4 pad layouts

Enable / Disable Control

Pin # 1 (state)

OPEN _{(No Connection)}

Output (Pin #3)

ACTIVE Output

High Impedance

“1” Level V_IH≥ 70% V_DD

“0” Level V_IL≤ 30% V_DD

Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)

10 Seconds Max

within 5°C of 260°C peak

t

p

260°C

Ramp-Up

3°C/s Max

Ramp Down

Not to exceed 6°C/s

225°C

180°C

50±10 Seconds

Above 225°C Reflow Area

120 ± 20 Seconds

In Pre-heating Area

160°C

25°C

400 Seconds MAX from +25°C to 260°C peak

Mechanical Dimensional Drawing & Pad Layout

Page 6 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Actual part marking

is depicted.

See Traceability (pg. 9)

for more information

Pin Connections

#1) E/D

#2) GND

#3) Output

#4) V_DD

*TP are test points and are NC.

Drawing is for reference to critical specifications defined by size measurements.

Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary

Page 7 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Tape and Reel Dimensions

2k Reel Dimensions

in mm

1k Reel Dimensions

2.0

in mm

2.0

120°

Ø21.0

Ø13.0

Ø21.0

Ø13.0

2.0

80.0

255.0

178.0

62.0

2.0

17.5

Labeling (Reels and smaller packaging are labeled with the below)

855-156.25-3



Fox Part Number: 855-156.25-3



Quantity:

2000 pieces

FXU-HC735R-156.25

1335

 Description: FXU-HC735R-156.25



Date Code

1335

(YYWW 2013 35^thwk)

 LOT #

24435

Page 8 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Traceability – LOT Number & Serial Identification

LOT Number

The LOT Number has direct ties to the customer purchase order. The LOT Number is stored internally in

non-volatile memory. XPRESSO-ULTRA parts are packaged in Cut Tape or Tape and Reel and placed in

an ESD bag. The package label containing the Lot number is affixed to the ESD bag, and in the case of

Tape and Reel it is attached to the reel as well

It is recommended that the X^PRESSO-ULTRA parts remain in this ESD bag during storage for protection and

identification.

If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one

of the parts, and the information that can be obtained is listed below:



Customer Purchase Order Number

Internal Fox Sales Order Number

Dates that the X^PRESSO-ULTRA part was shipped from the factory

The assigned customer part number

The specification that the part was designed for

Serial Identification

The Serial ID is the individualized information about the configuration of that particular X^PRESSO-ULTRA

part. The Serial ID is unique for each and every X^PRESSO-ULTRA part, and can be read by special Fox

equipment.

With the Serial ID, the below information can be obtained about that individual, X^PRESSO-ULTRA part:



Equipment that the X^PRESSO-ULTRA part was configured on

Raw material used to configure the XPRESSO-ULTRA part

Traceability of the raw material back to the foundries manufacturing lot

Date and Time that the part was configured

Any optimized electrical parameters based on customer specifications

Electrical testing of the actual completed part

Human resource that was monitoring the configuration of the part

Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial

Number of any X^PRESSO-ULTRA part produced and can then obtain the information from above within 24

hours

Page 9 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

Mechanical Testing

Parameter

Test Method

MIL-STD-202 Method 213

Condition C

Mechanical Shock

MIL-STD-202 Method 204

5g's for 20 minutes

Mechanical Vibration

12 cycles of each 3 orientations: X, Y, Z

High Temperature Operating Life (HTOL)

Hermetic Seal

Under Power @ 125°C for 1000 Hours

MIL-STD-202F: Method 112D

Test condition C

He pressure: 4 ±1 kgf / cm²2 Hour soak

Page 10 of 11

An Integrated Device Technology, Inc. company

FXU-HC73 Series

XpressO-ULTRA Home

XpressO-ULTRA XOs

XpressO Brochure

Patent Numbers:

US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;

Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652

China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179

US and Foreign Patents Pending

XpressO® Fox Electronics

Contact Information

Fox EMEA

Tel: +44.1283.568153

Email: www.foxonline.com/email.htm

Fox Singapore

Tel:+886-2-22073427,

Email: www.foxonline.com/email.htm

(USA)-Worldwide Headquarters

Tel: 888-GET-2-FOX

Outside US: +1.239.693.0099,

Fax:+1.239.693.1554

Email: www.foxonline.com/email.htm

The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no

responsibility is assumed by Fox Electronics for inaccuracies.

Page 11 of 11

An Integrated Device Technology, Inc. company


型号：	FXU-HC738-167.00
厂家：	FOX ELECTRONICS
描述：	Oscillator
文件：	总11页 (文件大小：234K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FXU-HC738-167.00 [FOX]

相关型号：

FXU-LC51

FXU-LC510R

FXU-LC515-0.016

FXU-LC515R

FXU-LC515R-500

FXU-LC515R-622.08

FXU-LC516R

FXU-LC518-156.25

FXU-LC518-622.08

FXU-LC518R

FXU-LC52

FXU-LC520-0.016