FAR-M2SC-14M318-D111 [FUJITSU]
Piezo Electric VCO; 压电VCO型号: | FAR-M2SC-14M318-D111 |
厂家: | FUJITSU |
描述: | Piezo Electric VCO |
文件: | 总6页 (文件大小:41K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-21703-3E
ASSP
Piezo Electric VCO
M2 Series (D110)
VOLTAGE CONTROLLED OSCILLATOR (4 to 30 MHz)
■ DESCRIPTION
The M2 series (D110) Voltage Controlled Oscillators (VCO) directly oscillate in the frequency range of 4 to 30 MHz.
The M2 seriesVCO use a piezoelectric single crystal with high electromechanical coupling coefficient (LiTaO3:lithium
tantalate) for stable and wide variable frequency width.
Excellent S/N and jitter characteristic due to high Q of lithium tantalate can realize high quality playback sound and
picture, especially in PLL circuit of digital audio and video equipments.
■ FEATURES
• Wider variable frequency width than quarts crystals: ±0.2% or more
• High stability (100 times more stable than LC or TTL-IC VCO)
• Excellent S/N and jitter characteristic due to high Q of lithium tantalate for high quality playback sound and
picture.
• Excellent temperature characteristic: –300 ~ 500 ppm (–10 ~ +70°C)
• 10-pin SIP ready for high-density mounting.
■ PACKAGE
1
M2 Series (D110)
■ TERMINAL ASSIGNMENT
(Front view)
Terminal No.
Terminal Name
VIN
Description
Control voltage input terminal
Analog grounding terminal
Output terminal
10
9
8
7
6
5
4
3
2
1
D-GND
VCC
VOUT
A-GND
A-GND
A-GND
A-GND
A-GND
A-GND
VIN
1
2, 3, 4, 5, 6, 7
A-GND
VOUT
8
9
VCC
Power supply terminal
Digital grounding terminal
10
D-GND
Note: The GND terminals are not connected inside the module.
Be sure to route them on the PC board.
■ MAXIMUM RATINGS
Item
Power supply voltage
Input control voltage
Power consumption
Symbol
VCC
VIN
Rated value
–0.5 ~ +7.0
–0.5 ~ +10.0
100
Unit
V
PD
mW
°C
Operating temperature
Storage temperature
Oscillation frequency range
Ta
–10 ~ +70
–30 ~ +100
4 ~ 30
Tstg
—
MHz
■ RECOMMENDED OPERATING CONDITIONS
Item
Power supply voltage
Input control voltage
Operating temperature
Symbol
VCC
Rated value
4.75 ~ 5.25
0 ~ 5
Unit
V
VIN
Ta
–10 ~ +60
°C
■ STANDARD FREQUENCIES
Frequencies
12.288 MHz
13.500 MHz
14.318 MHz
Uses
Part number
Frequencies
Uses
Part number
Audio FAR-M2SC-12M288-D110
Video FAR-M2SC-13M500-D110
17.734 MHz
22.579 MHz
24.576 MHz
Video FAR-M2SC-17M734-D110
Audio FAR-M2SC-22M579-D110
Audio FAR-M2SC-24M576-D110
Video
Audio
FAR-M2SC-14M318-D110
FAR-M2SC-16M934-D110
16.934 MHz
28.636 MHz
Video FAR-M2SC-28M636-D110
2
M2 Series (D110)
■ ELECTRICAL CHARACTERISTICS
(VCC = 5.0 V)
Rated value
Unit
Item
Symbol
Condition
Not loaded
minimum standard maximum
Power supply current
Oscillation frequency
ICC
fH
—
+2000
—
10
—
—
5.0
0
15
—
mA
VIN = 5.0 V
VIN = 0 V
ppm
f1
–2000
—
H level
L level
VOH
VOL
VIN = 2.5 V
VIN = 2.5 V
VCC – 0.5
—
Output voltage
V
0.5
Frequency voltage
stability
∆f (VCC) VCC = 4.75 ~ 5.25 V
∆f (Ta) VIN = 2.5 V
–100
–300
—
—
+100
+500
*1
*2
ppm
Frequency temperature
stability
*1: VCC = 5.0 V standard
*2: 25°C standard, Ta = –10 ~ +70°C
■ MEASURING CIRCUIT DIAGRAM
VCC
9
Into oscilloscope
VIN
1
8
Including probe
capacity (22 pF)
2
4
5
6
3
7
10
GND
3
M2 Series (D110)
■ STANDARD CHARACTERISTICS
Part number : FAR-M2SC-14M318-D110
1. Control voltage and oscillation frequency
5,000
4,000
3,000
2,000
1,000
Oscillation
frequency
(14.318 MHz)
0
change (ppm)
–1,000
–2,000
–3,000
–4,000
–5,000
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Control voltage (V)
2. Temperature characteristics
(25°C standard)
VIN = 2.5 V
800
700
600
500
400
300
Oscillation
200
frequency
100
change (ppm)
0
–100
–200
–300
–400
–500
(14.318 MHz)
–40 –30 –20 –10
0
10
20
30
40
50
60
70
80
90
Temperature (°C )
3. Power supply voltage characteristics
(VCC = 5.0 V standard)
VIN = 2.5 V
2,000
1,500
1,000
500
Oscillation
frequency
0
–500
(14.318 MHz)
change (ppm)
–1,000
–1,500
–2,000
4.50
4.75
5.00
5.25
5.50
Power supply voltage (V)
4
M2 Series (D110)
■ PART NUMBER SYSTEM
[Part number example]
FAR-M2SC–
–D
2
1
1
2
Frequency designation : Nominal frequency in six alphanumeric characters.
M indicates the decimal point in MHz.
(Example) 14.318 MHz 14M318
Serial No.
: 110 ~ 119 (standard : 110)
■ MARKING
No.1 pin indication
Nominal frequency
Lot
F
V-12M288
D110
1
10
■ DIMENSION
28.0Max
(1.102)
7.0Max
(0.276)
F
V-12M288
D110
Sealed
side
20.0Max
(0.787)
0.3 (0.012)
(0.039) 1
(0.394) 10
3.4±0.3 (0.134±0.012)
0.5
(0.020)
2.54
(0.100)
22.86 (0.900)
(2.54x9)
(0.100x9)
Unit : mm (inch)
5
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 4-1-1, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211-88, Japan
Tel: (044) 754-3763
All Rights Reserved.
The contents of this document are subject to change without
notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
Fax: (044) 754-3329
The information and circuit diagrams in this document presented
as examples of semiconductor device applications, and are not
intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the
use of this information or circuit diagrams.
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, U.S.A.
Tel: (408) 922-9000
FUJITSU semiconductor devices are intended for use in
standard applications (computers, office automation and other
office equipment, industrial, communications, and measurement
equipment, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage,
or where extremely high levels of reliability are demanded (such
as aerospace systems, atomic energy controls, sea floor
repeaters, vehicle operating controls, medical devices for life
support, etc.) are requested to consult with FUJITSU sales
representatives before such use. The company will not be
responsible for damages arising from such use without prior
approval.
Fax: (408) 432-9044/9045
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
63303 Dreieich-Buchschlag
Germany
Tel: (06103) 690-0
Fax: (06103) 690-122
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED
#05-08, 151 Lorong Chuan
New Tech Park
Singapore 556741
Tel: (65) 281-0770
Fax: (65) 281-0220
Any semiconductor devices have inherently a certain rate of
failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your
facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating
conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required
for export of those products from Japan.
F9703
FUJITSU LIMITED Printed in Japan
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明