FTR-B3CB1.5P-B10 [FUJITSU]

E-M RELAY,2 FORM C,DPDT,DC,RANDOM,AC/DC,1A@220VDC;


型号：	FTR-B3CB1.5P-B10
厂家：	FUJITSU
描述：	E-M RELAY,2 FORM C,DPDT,DC,RANDOM,AC/DC,1A@220VDC 光电二极管
文件：	总10页 (文件大小：720K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FTR-K1 SERIES

ULTRA MINIATURE RELAY

2 POLES - 2 A (Low Proﬁle Signal Relay)

FTR-B3 Series

n FEATURES

l DPDT 2C

l Ultra miniature low proﬁle relay with high heat resistant material

l Height: 5.45mm, Weight: 0.85g, Mounting space: 87mm²

^lAdopted superior contact spring for high frequency characteristic

l Comply with Telcordia / FCC standard

- Isolation distance: min. 1.6mm

- Dielectric strength between coil and contact: 1500VAC

- Surge strength: 2500V

l Low power: Non-latching: 140mW (230mW at 24V)

Latching: 100mW (120mW at 24V)

l High reliable bifurcated gold overlay silver contact

l UL, CSA recognized. Conﬁrms to IEC 60950, UL1950,

EN60950. Spacing & high breakdown voltage (basic

insulation, 150 working volts, pollution degree 2)

l RoHS compliant. Please see page 9 for more information

l Plastic sealed

n PARTNUMBER INFORMATION

FTR-B3

(a)

012

B10

(f)

[Example]

(b) (c) (d) (e)

(a)

(b)

Relay type

Terminal type

FTR-B3

: FTR-B3-Series

: Through hole

: Surface mount

: Surface mount, space saving

(c)

(d)

(e)

Coil type

: Standard type

: Latching type (1 coil)

Coil rated voltage

Contact material

012

: 1.5.....24 VDC

Coil rating table at page 3

: Gold overlay silver nickel

: Gold overlay silver palladium

(f)

Packaging

Nil

B10

: Tube packaging

: Tape&Peel packaging (only for surface mount type)

Remarks: Actual marking on relay would not carry code FTR and be as below:

Ordering code: FTR-B3GB012Z-B10 Actual marking: B3GB012Z

FTR-K1 SERIES

FTR-B3 SERIES

n SPECIFICATION

Item

Standard type

FTR-B3 ( ) A

2 form C

Latching type

FTR-B3 ( ) B

Contact Data Conﬁguration

Construction

Bifurcated contacts

Gold overlay silver nickel / Gold overlay silver

palladium

Material

Resistance (initial)

Max. 75 mΩ at 1 A, 6 VDC

30VDC, 1A / 125VAC, 0.3A

Contact rating (resistive)

Max. carrying current

Max. switching voltage

Max. switching power

Min. switching load *

Mechanical

250 VAC / 220VDC

62.5VA / 30W

0.01mA, 10mVDC

Min. 50 x 10⁶operations

Life

Min. 20 x 10⁶operations

Min. 100 x 10³operations at 1A 30VDC (at 0.5Hz)

Electrical

Min. 100 x 10³operations at 0.3A 125VAC (at 0.5Hz)

Coil Data

Rated power

140mW - 230mW

100mW - 120mW

Min. 10ms

Applied pulse width

Operate power

80mW - 130mW

57mW - 68mW

Operating temperature range

-40 °C to +85 °C (no frost)

Max. 3 ms (without bounce)

Min. 1,000MΩ at 500VDC

1,000VAC (50/60Hz) 1min

Timing Data Operate (at nominal voltage)

Release (at nominal voltage)

Insulation

Resistance (initial)

Dielectric strength

Surge strength

Clearance

Open contacts

Adjacent contacts 1,000VAC (50/60Hz) 1min.

Contacts to coil

Open contacts

1,500VAC (50/60Hz) 1min

2,500V, 2 x 10µs standard wave

0.28 mm

Adjacent contacts 1.0 mm

Contacts to coil

Open contacts

1.0 mm

0.28 mm

Creepage

Adjacent contacts 1.0 mm

Contacts to coil

Misoperation

Endurance

1.60 mm

Other

10 to 55 to 10Hz single amplitude 1.65mm

10 to 55 to 10Hz single amplitude 2.5mm

750m/s²

Vibration resistance

Shock

Misoperation

Endurance

1,000m/s²

Weight

Sealing

Approximately 0.85 g

RT III (plastic sealed)

* Minimum switching loads mentioned above are reference values. Please perform the conﬁrmation test with actual

load before production since reference values may vary according to switching frequencies, environmental conditions

and expected reliability levels.

FTR-K1 SERIES

FTR-B3 SERIES

n COIL RATING

Standard type

Rated Coil

Voltage

(VDC)

Must Operate

Voltage

Must Release

Voltage

Coil

Code

Coil Resistance

+/- 10% (Ohm)

Rated Power

(mW)

(VDC) *

1.5

003

4.5

1.5

16.1

64.3

145

1.13

2.25

3.38

4.5

0.15

0.3

4.5

0.45

0.6

140

230

006

009

012

024

257

579

6.75

9.0

0.9

1,028

2,504

1.2

18.0

2.4

Latching type (1 coil)

Rated Coil

Voltage

(VDC)

Coil

Code

Coil Resistance

+/- 10% (Ohm)

Set Voltage

(VDC) *

Reset Voltage

(VDC) *

Set/Reset current

(mA)

Rated Power

(mW)

1.5

003

4.5

1.5

22.5

+1.13

+2.25

+3.38

+4.5

-1.13

-2.25

-3.38

-4.5

4.5

203

100

120

006

009

012

024

360

810

+6.75

+9.0

-6.75

-9.0

1,440

4,800

+18.0

-18.0

Note: All values in the table are valid for 20°C and zero contact current.

* Speciﬁed operate values are valid for pulse wave voltage.

n SAFETY STANDARDS

Type

Compliance

Contact rating

UL 508

Flammability: UL 94-V0 (plastics)

0.5A, 125VAC (resistive)

0.3A, 110VDC (General use)

2A, 30VDC (General use)

E 63615

CSA

C22.2 No. 14

LR 40304-58

Comply with Telcordia speciﬁcations and FCC part 68 and meet BSI EN60950-1:

Marking only for UL, CSA

FTR-K1 SERIES

FTR-B3 SERIES

n CHARACTERISTIC DATA (Reference)

Standard type

FTR-K1 SERIES

FTR-B3 SERIES

Latching type

FTR-K1 SERIES

FTR-B3 SERIES

FTR-K1 SERIES

FTR-B3 SERIES

n DIMENSIONS

FTR-B3C - Through hole type

PC board mounting

hole layout

Schematics *

(BOTTOM VIEW)

Dimensions

(BOTTOM VIEW)

FTR-B3G - Surface mount type

Schematics *

(TOP VIEW)

PC board mounting

pad layout

Dimensions

(TOP VIEW)

FTR-B3S - Space saving type

PC board mounting

pad layout

Schematics *

(TOP VIEW)

Dimensions

(TOP VIEW)

* Indicates reset state for latching relays (FTR-B3CB, FTR-B3GB and FTR-B3SB versions)

Indicates non-operate state for standard relays (FTR-B3CA, FTR-B3GA and FTR-B3SA versions)

Unit: mm

FTR-K1 SERIES

FTR-B3 SERIES

n COIL POLARITY LATCHING TYPE

Coil terminal

Set

Reset

n RECOMMENDED SOLDERING CONDITIONS FOR SMT (SEE PAGE 9)

(TEMPERATURE PROFILE)

Notes:

1. Temperature proﬁles on page 9 show the temperature of PC board surface.

2. Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board

surfaces vary according to the size of PC board, status of parts mounting and heating method.

n PRECAUTIONS

- For details on general precautions, refer to the section on technical descriptions.

- Since this is a polarized relay, follow the instructions of the internal wiring diagram for the ± connections of the coil.

- Note that the terminal layout and internal wiring of the surface mount relay are a top view.

- SMT versions of the FTR-B3 relays will be shipped in "dry pack".

n PACKAGING SPECIFICATIONS

Packaging method

Packaging orientation code: B

- Packaging standard: JIS C 0806

- Taping type: TB 1612

- Reel type: R16D

- Quantity of 1 reel: 1000 pieces

Tape dimensions

Reel dimensions

Unit: mm

Note:

Relays are sold in 1000 pieces per box. Minimum order quantity is 1000 pieces

for tube and tape & reel packing.

FTRFT-KR-1BS3ESREIREISES

RoHS Compliance and Lead Free Information

1. General Information

All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including

amendments.

Cadmium as used in electrical contacts is exempted from the RoHS directives.

As per Annex III of directive 2011/65/EU.

All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:

http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf

Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.

This material has been verified to be compatible with PbSn assembly process.

2. Recommended Lead Free Solder Condition

Recommended solder Sn-3.0Ag-0.5Cu.

Flow Solder Condition:

Pre-heating:

maximum 120˚C

within 90 sec.

Soldering:

dip within 5 sec. at

255˚C ± 5˚C solder bath

Relay must be cooled by air immediately

after soldering

Solder by Soldering Iron:

Soldering Iron 30-60W

Temperature:

Duration:

maximum 350-360˚C

maximum 3 sec.

We highly recommend that you conﬁrm your actual solder conditions

3. Moisture Sensitivity

Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.

4. Tin Whiskers

Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length

whisker was found by our in house test.

FTR-K1 SERIES

FTR-B3 SERIES

Fujitsu Components International Headquarter Ofﬁces

Japan

Europe

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (81-3) 5449-7010

Tel: (31-23) 5560910

Fax: (81-3) 5449-2626

Email: promothq@ft.ed.fujitsu.com

Web: www.fcl.fujitsu.com

Fax: (31-23) 5560950

Email: info@fceu.fujitsu.com

Web: emea.fujitsu.com/components/

North and South America

Fujitsu Components America, Inc.

250 E. Caribbean Drive

Asia Paciﬁc

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

#01-01 Citilink Warehouse Complex

Singapore 118529

Fax: (1-408) 745-4970

Tel: (65) 6375-8560

Email: components@us.fujitsu.com

Web: http://us.fujitsu.com/components

Fax: (65) 6273-3021

Email: fcal@fcal.fujitsu.com

Web: http://www.fujitsu.com/sg/services/micro/components/

The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general

information purposes.

The use of the contents, data and information provided in this datasheet is at the users’ own risk.

Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,

complete and up to date.

Fujitsu Components Europe B.V. and afﬁliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its

employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related

graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.

Nor do Fujitsu Components Europe B.V. and afﬁliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability

for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ﬁtness for particular use,

with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,

usefulness, availability and completeness thereof. Rev. December 16, 2014

FTR-B3CB1.5P-B10 [FUJITSU]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E