MB4204 [FUJITSU]
QUAD COMPARATOR; 四比较型号: | MB4204 |
厂家: | FUJITSU |
描述: | QUAD COMPARATOR |
文件: | 总8页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-12104-2E
LINEAR IC
QUAD COMPARATOR
MB4204
LOW POWER QUAD COMPARATOR
The Fujitsu MB4204 is a Quad Comparator which consists of four independent channels. The MB4204 is designed
to operate form either a single power or dual power supplies over a wide range of voltages. The input characteristics
is equivalent of current industry standard comparator. Even though operated from a single power supply, the MB4204
is suitably designed to compare multiple signals in parallel and to be operated with battery because its input common
mode voltage range includes ground potential and it requires low power supply current.
The MB4204 can be high density mounted because it integrates 4 circuits on a chip in DIP/FPT-14-pin package.
The MB4204 is pin compatible with LM339.
■ FEATURES
• Wide power supply voltage range: +2 to +36V
• Wide input common mode range: 0 to (VCC – 1.5) V
• Low power supply current: 0.8 mA typ.
• Low input offset voltage: 2 mV typ.
• Low input bias current: 25 nA typ.
• Open Collectors Output allow to wired-OR Connection
• Package
—14-pin Plastic DIP Package (Suffix: –P)
—14-pin Plastic FPT Package (Suffix: –PF)
■ PACKAGES
PLASTIC PACKAGE
DIP-14P-M02
PLASTIC PACKAGE
FPT-14P-M04
This device contains cirduitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that
normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.
1
MB4204
■ ABSOLUTE MAXIMUM RATINGS (see NOTE)
(TA = 25°C)
Rating
Power Supply Voltage
Symbol
Value
36
Unit
VCC
PD
V
mW
V
Power Dissipation
500
Differential Input Voltage
Common Mode Input Voltage
Output Short Circuit Duration
Operating Temperature
Storage Temperature
VID
VI
36
–0.3 to +36
Infinite
–20 to +75
–55 to +125
V
—
—
°C
°C
TA
TSTG
NOTE: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional
operation should be restricted to the conditions as detailed in the operational sections of this data sheet.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
■ PIN ASSIGNMENT
OUT–C
OUT–D
OUT–B
OUT–A
1
2
14
13
3
4
5
6
7
12
GND
VCC
–IN–A
+IN–A
–IN–B
+IN–B
– +
– +
+IN–D
–IN–D
+IN–C
11
10
9
– + – +
–IN–C
8
(TOP VIEW)
2
MB4204
Fig. 1 — EQUIVALENT CIRCUIT
–IN–A
4
+IN–A–IN–B
+IN–B–IN–C
–IN–C–IN–D
10
+IN–D
11
VCC
3
5
6
8
7
9
12
2
1
14
OUT–C
13
GND
OUT–A
OUT–B
OUT–D
3
MB4204
■ ELECTRICAL CHARACTERISTICS
(VCC = +5 V, TA = 25°C)
Value
Unit
Parameter
Symbol
Condition
VO = VREF = 1.4 V
Min.
—
Typ.
Max.
Input Offset Voltage
Input Offset Current
Input Bias Current
VIO
IIO
2
5
mV
nA
nA
—
—
—
5
50
II*1
—
25
250
VCC –
1.5
Input Common Mode Voltage
Voltage Gain
VCM
AV
—
0
—
200
13
V
V/
mV
RL = 15 kΩ
—
—
—
—
mho
s
Transconductance
—
—
2
Large Signal Response Time
Response Time
RL = 5.1 kΩ, VRL = 5 V
—
—
—
6
300
1.3
250
16
—
—
400
—
—
1
ns
µs
*
3
*
RL = 5.1 kΩ, VRL = 5 V
Output Saturation Voltage
Output Sink Current
VOL
ISINK
ILEAK
ILEAK
ICC
VIN(–) = 1 V, VIN(+) = 0 V, ISINK = 3 mA
VIN(–) = 1 V, VIN(+) = 0 V, VO ≤ 1.5 V
VIN(+) = 1 V, VIN(–) = 0 V, VO = 5 V
VIN(+) = 1 V, VIN(–) = 0 V, VO = 30 V
RL = ∞
mV
mA
nA
µA
mA
Output Leakage Current
Output Leakage Current
Power Supply Current
—
—
—
0.1
—
0.8
2
Notes:
*1: The direction of the input bias current flows from IC.
*2: VIN = TTL Logic Swing, VREF = 1.4 V
*3: VIN = 100 mV, Overdrive = 5 mV
4
MB4204
Fig. 2 — TEST CIRCUIT
VCC
VRL
VCC
5 V
RL
RL = 5.1kΩ
+
–
–
VIN(+)
VIN(–)
VO
VO
PG
+
VREF
VREF sets over drive level.
■ TYPICAL CHARACTERISTICS CURVES
Fig. 3 — Power Supply Current vs.
Fig. 4 — Output Saturation Voltage vs.
1.6
10
3
TA (°C)
–20
1.2
1
25
0.3
70
TA = 70°C
0.8
0.1
0.03
0.01
0.003
0.001
TA = 25°C
0.4
0
TA = –20°C
0
10
20
30
40
0.01 0.03 0.1 0.3 1
3 10 30 100
Power Supply Voltage VCC (V)
Output Sink Current ISINK (mA)
Fig. 5 — Input/Output Voltage vs.
Fig. 6 — Input/Output Voltage vs.
6
6
4
Input Over Drive
100 mV
Input Over Drive
4
5 mV
20 mV
5 mV
20 mV
2
2
100 mV
0
0
0
100
TA = 25°C
TA = 25°C
–100
0
0
0.5 1.0
Time (µs)
1.5 2.0
0
0.5 1.0
Time (µs)
1.5 2.0
5
MB4204
■ PACKAGE DIMENSIONS
14 pin, Plastic DIP
(DIP-14P-M02)
+0.20
–0.30
.770 +–..001028
19.55
INDEX-1
INDEX-2
6.20±0.25
(.244±.010)
0.51(.020)MIN
4.36(.172)MAX
3.00(.118)MIN
0.25±0.05
(.010±.002)
0.46±0.08
(.018±.003)
+0.30
–0
.060 +–0.012
15˚MAX
1.52
7.62(.300)
TYP
2.40(.094)
MAX
2.54(.100)
TYP
Dimensions in mm (inches).
C
1994 FUJITSU LIMITED D14010S-4C-3
(Continued)
6
MB4204
(Continued)
14 pin, Plastic SOP
(FPT-14P-M04)
2.25(.089)MAX
10.15 +–00..2205 .400 –+..000180
0.05(.002)MIN
(STAND OFF)
6.80 +–00..2400
5.30±0.30
7.80±0.40
INDEX
.268 +–..000186
(.209±.012) (.307±.016)
"B"
1.27(.050)
TYP
0.45±0.10
(.018±.004)
0.15 +–00..0025
.006 +–..000012
0.50±0.20
(.020±.008)
M
Ø0.13(.005)
Details of "A" part
Details of "B" part
0.40(.016)
0.20(.008)
0.15(.006)
0.20(.008)
"A"
0.10(.004)
0.18(.007)MAX
0.68(.027)MAX
0.18(.007)MAX
0.68(.027)MAX
7.62(.300)REF
C
Dimensions in mm (inches).
1994 FUJITSU LIMITED F14010S-2C-4
7
MB4204
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 4-1-1, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211-8588, Japan
Tel: (044) 754-3763
All Rights Reserved.
The contents of this document are subject to change without
notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
Fax: (044) 754-3329
http://www.fujitsu.co.jp/
The information and circuit diagrams in this document presented
as examples of semiconductor device applications, and are not
intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the
use of this information or circuit diagrams.
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, USA
Tel: (408) 922-9000
Fax: (408) 922-9179
FUJITSU semiconductor devices are intended for use in
standard applications (computers, office automation and other
office equipment, industrial, communications, and measurement
equipment, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage,
or where extremely high levels of reliability are demanded (such
as aerospace systems, atomic energy controls, sea floor
repeaters, vehicle operating controls, medical devices for life
support, etc.) are requested to consult with FUJITSU sales
representatives before such use. The company will not be
responsible for damages arising from such use without prior
approval.
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: (800) 866-8608
Fax: (408) 922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
D-63303 Dreieich-Buchschlag
Germany
Tel: (06103) 690-0
Fax: (06103) 690-122
Any semiconductor devices have inherently a certain rate of
failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your
facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating
conditions.
http://www.fujitsu-ede.com/
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE LTD
#05-08, 151 Lorong Chuan
New Tech Park
Singapore 556741
Tel: (65) 281-0770
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required
for export of those products from Japan.
Fax: (65) 281-0220
http://www.fmap.com.sg/
F9803
FUJITSU LIMITED Printed in Japan
相关型号:
MB4204-P
Comparator, 4 Func, 5000uV Offset-Max, 1300ns Response Time, BIPolar, PDIP14, PLASTIC, DIP-14
FUJITSU
MB42T28-1.000-0.5/0+50
HCMOS Output Clock Oscillator, 1MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, 4 PIN
EUROQUARTZ
©2020 ICPDF网 联系我们和版权申明