MB86064PB-G [FUJITSU]

Dual 14-bit 1GSa/s DAC Development Kit; 双14位1GSa / s的DAC的开发工具包
MB86064PB-G
型号: MB86064PB-G
厂家: FUJITSU    FUJITSU
描述:

Dual 14-bit 1GSa/s DAC Development Kit
双14位1GSa / s的DAC的开发工具包

转换器 数模转换器
文件: 总4页 (文件大小:502K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Product Flyer  
Mixed Signal Division  
February 2004  
Version 1.0  
DK86064-1  
FME/MS/DAC80/FL_2/5084  
Dual 14-bit 1GSa/s DAC Development Kit  
Features  
Description  
• Modular development kit for MB86064  
• General Purpose Motherboard  
• PC USB Interface lead  
Fujitsu’s DK86064-1 Dual 14-bit 1GSa/s DAC  
Development Kit provides a simple and effective  
means of evaluating the MB86064 Digital to  
Analog Converter (DAC).  
• Plug-on DAC Module  
• User Manual  
• SMA data adaptors (optional)  
A user manual provides a step-by-step guide  
from configuring the board, connecting test  
equipment, through to evaluating the MB86064’s  
performance. Schematics, PCB overlays and  
connector pin-outs are included. The evaluation  
• PC control software supplied on CD  
• Win98/2000 compatible  
• Provides easy access to on-chip waveform platform requires two DC power supplies, 1.8V &  
memories to perform initial performance tests, 3.3V, each capable of providing 1A.  
avoiding need for high performance data  
generating equipment  
A PC USB interface lead and control software  
are provided to configure, control and download  
test vectors to the device.  
• Evaluate multiple devices by swapping DAC  
modules (optional)  
DK86064-1 Evaluation Platform  
Copyright © 2004 Fujitsu Microelectronics Europe GmbH  
Production  
Page 1 of 4  
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before  
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.  
February 2004 Version 1.0  
FME/MS/DAC80/FL_2/5084  
DK86064-1 Dual 14-bit 1GSa/s DAC Development Kit  
generating equipment is available, initial testing  
using the waveform memories serves as a useful  
setup check.  
Essential Equipment  
Apart from the power supplies, equipment vital to  
conducting an evaluation of the MB86064 is a  
high quality RF clock and spectrum analyser.  
The phase & spurious performance of the clock  
should be such as to not limit the DAC  
Pattern  
generators  
can be connected to  
the General Purpose  
performance  
(e.g.  
HP8664A).  
However,  
Motherboard  
using  
performance of even the best spectrum  
analysers available is inferior to that of the  
converter. To overcome this, filtering techniques  
and careful attention to analyser settings, e.g.  
RF Attenuation, is essential during the course of  
the evaluation.  
either the on-board 2-  
row 0.1” data headers,  
or the optional SMA  
Adaptors. When using  
the 0.1” data headers  
it is assumed that a  
custom wiring harness  
will be required. This  
would be  
according  
made  
the  
to  
connector type and  
pinout  
of  
the  
generator’s  
output.  
The optional SMA  
Adaptors provide a convenient conversion from  
SMA to the Motherboard’s 0.1” headers. This  
simplifies the simultaneous removal of 28 SMAs  
(14-bit differential LVDS) when required. One  
advantage of this is the ability to swap the data  
generator easily between DAC data ports if  
insufficient channels are available to drive both  
ports simultaneously.  
Rather than using general purpose test  
equipment, customers may wish to use parts of  
the development kit to construct an evaluation  
platform more representative of their end  
application. This might, for example, involve an  
FPGA to implement a variety of pre-processing  
and/or waveform generation. At the simplest  
level, a setup similar to that described for the  
digital pattern generator could be used, where a  
custom wiring harness interfaces a standard or  
existing FPGA evaluation platform to the  
Motherboard. Control of the DAC from the PC  
software can be maintained to minimise effort to  
get up and running.  
Driving the DAC  
As with any DAC evaluation, an appropriate  
stimulus [test vector] is required. Unfortunately at  
data rates above 300MSa/s this requires digital  
pattern generation capabilities beyond most  
standard test equipment. The DK86064-1  
Development Kit has been designed to help  
overcome this difficulty in a number of ways.  
Initially, simple unmodulated or pseudo-  
modulated single and multi-tone tests can be  
conducted using waveforms downloaded to the  
device’s on-chip waveform memories.  
Test waveforms are easily loaded into the  
waveform memories, via a USB interface, using  
the PC software supplied with the main  
Motherboard. Even if high speed digital pattern  
Alternatively, an FPGA board could be designed  
with a DAC interface connector compatible with  
the Fujitsu DAC Module’s 114-pin Mictor  
Page 2 of 4  
Production  
Copyright © 2004 Fujitsu Microelectronics Europe GmbH  
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before  
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.  
February 2004 Version 1.0  
FME/MS/DAC80/FL_2/5084  
DK86064-1 Dual 14-bit 1GSa/s DAC Development Kit  
connector, thereby removing the Motherboard.  
Ordering Information  
Having done this, it is still possible to continue  
using the PC USB interface lead and software if  
this functionality is not incorporated in the FPGA.  
Part  
Order Reference  
DK86064-1 Development Kit DK86064-1  
(includes General Purpose  
Motherboard, DAC module,  
PC USB Interface Lead &  
Control Software and User  
Manual)  
Clock Inputs & Analog Outputs  
The DAC module is designed to accommodate  
up to six SMA connectors. Two are used for the  
differential clock in and four for the two  
differential analog outputs. Modules are supplied  
with transformers on-board to perform single  
ended-to-differential and differential-to-single  
ended conversions. As such, only 3 SMAs are  
required. This facilitates easier connection to  
standard test equipment during evaluation.  
Additional DAC Module  
SMA Adaptors (optional)  
DK86064-1-DAC  
DK86064-1-SMA  
DKUSB-1  
PC USB Interface Lead &  
Control Software  
PC Control Software  
MB86064 Device  
MB86064PB-G  
Contact Fujitsu  
Contact Fujitsu  
To simplify control & configuration of the  
MB86064 during evaluation the development kit  
includes a PC USB interface lead and a software  
utility. The USB interface lead interfaces  
between a host PC’s USB port and the 4-wire  
serial interface implemented on the device.  
Software is supplied on CD.  
DK86064-1 User Manual  
MB86064 Datasheet  
Copyright © 2004 Fujitsu Microelectronics Europe GmbH  
Production  
Page 3 of 4  
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before  
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.  
February 2004 Version 1.0  
FME/MS/DAC80/FL_2/5084  
DK86064-1 Dual 14-bit 1GSa/s DAC Development Kit  
Worldwide Headquarters  
Japan  
Asia  
Tel: +81 44 754 3753  
Fax: +81 44 754 3329  
Tel: +65 281 0770  
Fax: +65 281 0220  
Fujitsu Limited  
Kamikodanaka 4-1-1  
Nakahara-ku  
Fujitsu Microelectronics Asia Pte Ltd  
151 Lorong Chauan  
New Tech Park  
Kawasaki-shi  
#05-08  
Kanagawa-ken 211-8588  
Japan  
Singapore 556741  
http://www.fujitsu.com  
http://www.fmal.fujitsu.com  
USA  
Europe  
Tel: +1 408 737 5600  
Fax: +1 408 737 5999  
Fujitsu Microelectronics America, Inc. Tel: +49 6103 6900  
Fujitsu Microelectronics Europe GmbH  
Fax: +49 6103 690122  
1250 E. Arques Avenue, M/S 333  
Sunnyvale, CA 94088-3470  
USA  
Am Siebenstein 6-10  
D-63303 Dreieich-Buchschlag  
Germany  
Tel: +1 800 866 8608 Customer Response Center  
Fax: +1 408 737 5984 Mon-Fri: 7am-5pm (PST)  
http://www.fma.fujitsu.com/  
http://www.fme.fujitsu.com/  
4
The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales  
representatives before ordering.  
The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not  
intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent  
rights or other rights of third parties arising from the use of this information or circuit diagrams. No license is granted by implication  
or otherwise under any patent or patent rights of Fujitsu Microelectronics Europe GmbH.  
FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office  
equipment, industrial, communications, and measurement equipment, personal or household devices, etc.).  
CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly  
affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as  
aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.)  
are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages  
arising from such use without prior approval.  
Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such  
failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention  
of over-current levels and other abnormal operating conditions.  
If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign  
Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export  
of those products from Japan.  
FME/MS/DAC80/FL_2/5084 1.0  
Page 4 of 4  
Production  
Copyright © 2004 Fujitsu Microelectronics Europe GmbH  
Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before  
ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.  

相关型号:

MB86064PB-GE1

Dual 14-bit 1GSa/s DAC Development Kit
FUJITSU

MB86064_09

High-Performance Digital to Analog Converters
FUJITSU

MB86065

High-Performance Digital to Analog Converters
FUJITSU

MB86065PB-G

暂无描述
FUJITSU
FUJITSU

MB86065PB-G-K1E1

D/A Converter, 14-Bit, 1 Func, CMOS, PBGA120
FUJITSU

MB86065PB-GE1

Converter
FUJITSU

MB86101BAN

HIGH FREQUENCY CERAMIC CAPACITORS
MURATA

MB86101BBN

HIGH FREQUENCY CERAMIC CAPACITORS
MURATA

MB86101CAN

HIGH FREQUENCY CERAMIC CAPACITORS
MURATA

MB86101CBN

HIGH FREQUENCY CERAMIC CAPACITORS
MURATA

MB86101DAN

HIGH FREQUENCY CERAMIC CAPACITORS
MURATA