MZ-12HS [FUJITSU]
MINIATURE RELAY 1 POLE-1 to 2 A (FOR SIGNAL SWITCHING); 小型继电器1 POLE - 1至2 A(用于信号切换)型号: | MZ-12HS |
厂家: | FUJITSU |
描述: | MINIATURE RELAY 1 POLE-1 to 2 A (FOR SIGNAL SWITCHING) |
文件: | 总8页 (文件大小:496K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
MZ SERIES
RoHS compliant
n FEATURES
l Subminiature size
l Standard and high sensitivity types available
l UL, CSA recognized
l FCC rules and regulations part 68
—Dielectric strength 1,500 V between coil and contacts
l High reliability-bifurcated contacts available
l DIL pitch terminals
l Plastic sealed type
l RoHS compliant since date code: 0437L2
Please see page 6 for more information
n ORDERING INFORMATION
MZ
F
– 12
W
HG –
K
– U
[Example]
(a) (b)
(c) (d) (e)
(f)
(g)
(a)
(b)
Series Name
MZ : MZ Series
Dielectric Function
Nominal Voltage
Contact
Nil : Standard type
F : High dielectric strength type
(c)
(d)
(e)
(f)
(g)
Refer to the COIL DATA CHART
Nil : 1 A single
D : 2 A single (without MZF)
W : 1 A bifurcated type
Coil Type
HG : Standard type (without MZ-D) (450-500mW)
HS : High sensitivity type (without MZF/MZ-D) (190-270mW)
Enclosure
Nil : Flux free type
K : Plastic sealed type
UL, CSA Standard
Nil : Non UL, • CSA approved type
U : UL • CSA approved type
Note: For movable and stationary contact with gold overlay type, add suffix “–OH”.
1
MZ SERIES
n COIL DATA CHART
MODEL
Coil
Must
Must
Nominal
voltage
Nominal
Single
1 A Type
Bifurcated
1 A Type
resistance operate
release
(±10%)
voltage
voltage
power
2 A Type
MZ-1.5D-(K) MZ (F)-1.5HG-(K)
MZ- 3 D-(K) MZ (F)- 3 HG-(K)
MZ-4.5D-(K) MZ (F)-4.5HG-(K)
MZ- 5 D-(K) MZ (F)- 5 HG-(K)
MZ- 6 D-(K) MZ (F)- 6 HG-(K)
MZ- 9 D-(K) MZ (F)- 9 HG-(K)
MZ-12 D-(K) MZ (F)-12 HG-(K)
MZ-18 D-(K) MZ (F)-18 HG-(K)
MZ-24 D-(K) MZ (F)-24 HG-(K)
MZ-48 D-(K) MZ (F)-48 HG-(K)
MZ-1.5HS-(K)
MZ-1.5WHG-(K)
MZ- 3 WHG-(K)
MZ-4.5WHG-(K)
MZ- 5 WHG-(K)
MZ- 6 WHG-(K)
MZ- 9 WHG-(K)
MZ-12 WHG-(K)
MZ-18 WHG-(K)
MZ-24 WHG-(K)
MZ-48 WHG-(K)
MZ-1.5WHS-(K)
MZ- 3 WHS-(K)
MZ-4.5WHS-(K)
MZ- 5 WHS-(K)
MZ- 6 WHS-(K)
MZ- 9 WHS-(K)
MZ-12 WHS-(K)
MZ-15 WHS-(K)
MZ-18 WHS-(K)
MZ-24 WHS-(K)
MZ-48 WHS-(K)
1.5 VDC
3 VDC
5 Ω
20 Ω
1.05 VDC 0.08 VDC
2.1 VDC 0.15 VDC
3.15 VDC 0.23 VDC
3.5 VDC 0.25 VDC
450 mW
450 mW
450 mW
450 mW
450 mW
450 mW
450 mW
450 mW
450 mW
500 mW
190 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
4.5 VDC
5 VDC
45 Ω
56 Ω
6 VDC
80 Ω
4.2 VDC
0.3 VDC
9 VDC
180 Ω
320 Ω
720 Ω
1,280 Ω
4,600 Ω
12 Ω
6.3 VDC 0.45 VDC
12 VDC
18 VDC
24 VDC
48 VDC
1.5 VDC
3 VDC
8.4 VDC
12.6 VDC
16.8 VDC
33.6 VDC
0.6 VDC
0.9 VDC
1.2 VDC
2.4 VDC
1.05 VDC 0.08 VDC
2.1 VDC 0.15 VDC
3.15 VDC 0.23 VDC
3.5 VDC 0.25 VDC
MZ- 3 HS-(K)
45 Ω
MZ-4.5HS-(K)
4.5 VDC
5 VDC
100 Ω
120 Ω
180 Ω
400 Ω
700 Ω
1,100 Ω
1,600 Ω
2,800 Ω
8,500 Ω
MZ- 5 HS-(K)
MZ- 6 HS-(K)
6 VDC
4.2 VDC
6.3 VDC 0.45 VDC
8.4 VDC 0.6 VDC
10.5 VDC 0.75 VDC 200 mW
0.3 VDC
MZ- 9 HS-(K)
9 VDC
MZ-12 HS-(K)
12 VDC
15 VDC
18 VDC
24 VDC
48 VDC
MZ-15 HS-(K)
MZ-18 HS-(K)
12.6 VDC
16.8 VDC
33.6 VDC
0.9 VDC
1.2 VDC
2.4 VDC
200 mW
200 mW
270 mW
MZ-24 HS-(K)
MZ-48 HS-(K)
Note: All values in the table are measured at 20°C.
2
MZ SERIES
n SPECIFICATIONS
Standard
Single
MZ-( ) HG MZ-( ) WHG MZ-( ) HS
High Sensitivity Type
Item
Bifurcated
Single
Bifurcated
MZ-( ) D
MZ-( ) WHS
Contact
Arrangement
Material
1 form C (SPDT)
Gold-overlay
silver-nickel
Gold overlay silver-palladium
Resistance (initial)
Maximum 100 mΩ (at 1 A 6 VDC)
Rating (resistive)
2 A 24 VDC
1 A 120 VAC
1 A 24 VDC
0.5 A 120 VAC
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Minimum Switching Load*
2 A
120 VA/48 W
60 AV/24 W
120 VAC, 60 VDC
2 A
1 A
1 mA 1 VDC
0.1 mA 100 mVDC 1 mA 1 VDC
0.1 mA 100 mVDC
Capacitance
(at 10 MHz)
Approximately 0.8 pF (between open contacts, adjacent contacts)
Approximately 7.5 pF (between coil and contacts)
Coil
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
450 to 500 mW
190 to 270 mW
100 to 130 mW
–30°C to +75°C
220 to 250 mW
–30°C to +55°C (no frost)
Maximum 6 ms
Time Value Operate (at nominal voltage)
Release (at nominal voltage)
Maximum 3 ms
Life
Mechanical
2 × 107 operations minimum
Electrical (at rating)
1 A 120 VAC
0.5 A 120 VAC 2 × 105 operations minimum
1 × 105 ops. min. 1 A 24 VAC 5 × 105 operations minimum
2 A 24 VDC
2 × 105 ops. min.
Other
Vibration
Misoperation
10 to 55 Hz (double amplitude of 3.28 mm)
10 to 55 Hz (double amplitude of 3.28 mm)
100 m/s2 (11±1 ms)
Resistance
Endurance
Misoperation
Endurance
Shock
Resistance
1,000 m/s2 ( 6±1 ms)
Weight
Approximately 3.5 g
1
*
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load
before production since reference values may vary according to switching frequencies, environmental conditions and ex-
pected reliability levels.
3
MZ SERIES
nINSULATION
Item
Single
Isolation (initial)
Minimum 100 MΩ (at 500VDC)
Dielectric
Strength
open contacts
coil and contacts
Standard: 500VAC 1 min., High isolation: 1,000VAC 1 min.
Standard: 500VAC 1 min., High isolation: 1,500VAC 1 min.
Surge Voltage
1500V (coil-contact) (1/40 µs standard wave)
n SAFETY STANDARDS AND FILE NUMBERS
Type
Compliance
Contact rating
UL
UL 508
UL 60950-1
E 45026
Flammability: UL 94-V0 (plastics)
[1A]
0.5A, 120VAC (resistive)
1A, 24VDC (resistive)
[2A]
1A, 120VAC (resistive)
2A, 30VDC (resistive)
CSA
C22.2 No. 14
LR 35579
n CHARACTERISTIC DATA
0.1
0.3
0.5
4
MZ SERIES
n REFERENCE DATA
5
MZ SERIES
n DIMENSIONS
l
Dimensions
l
Schematics
(Bottom View)
l
PC board mounting
hole layout
(Bottom View)
MZ (F) type (Flux free type)
MZ (F)-K type (Plastic sealed type)
Unit: mm
6
MZ SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
l
l
l
l
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
7
MZ SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Asia Pacific
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. January 9, 2008.
8
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明