MZ-5HG-K-U [FUJITSU]

Power/Signal Relay, POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.09A (COIL), 5VDC (COIL), 450mW (COIL), 1A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT;


型号：	MZ-5HG-K-U
厂家：	FUJITSU
描述：	Power/Signal Relay, POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.09A (COIL), 5VDC (COIL), 450mW (COIL), 1A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT PC 光电二极管继电器
文件：	总8页 (文件大小：544K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FTR-K1 SERIES

Non-promotional not for new designs

MINIATURE RELAY

1 POLE - 1 to 2 A (For Signal Switching)

MZ Series

n FEATURES

l Subminiature size

l Standard and high sensitivity types available

l UL, CSA recognized

l FCC rules and regulations part 68

- Dielectric strength 1,500 V between coil and contacts

l High reliability-bifurcated contacts available

l DIL pitch terminals

l Plastic sealed type

l RoHS compliant.

Please see page 7 for more information

n PARTNUMBER INFORMATION

HG - K - U

[Example]

(a) (b) (*) (c) (d) (e)

(f)

(g)

(a)

(b)

Relay type

Dielectric funtion

: MZ Series

Nil

: Standard type

: High dielectric strength type

(c)

(d)

Coil rated voltage

: 1.5....48VDC

Coil rating table at page 3

Contact conﬁguration

Nil

: 1A single

: 2A single (without MZF)

: 1A bifurcated

(e)

(f)

Coil type

: Standard type (without MZ-D) (450-500mW)

: High sensitive type (without MZF/MZ-D) (190-270mW)

Enclosure

Nil

: Flux free type

: Plastic sealed type

(g)

UL, CSA, standard

Nil

: Non UL, CSA approved

: UL, CSA approved

Note: For movable and stationary contact with gold overlay type, add sufﬁx “–OH”.

FTR-K1 SERIES

MZ SERIES

n SPECIFICATION

Item

Standard type

Single

High Sensitive type

Bifurcated

Single

Bifurcated

MZ - ( ) D

MZ- ( ) HG MZ-( ) WHG MZ - ( ) HS MZ-( ) WHS

Contact

Data

Conﬁguration

1 form C (SPDT)

Gold-overlay

Material

Gold overlay silver-palladium

silver nickel

Resistance (initial)

Contact rating (resistive)

Max. 100 mΩ at 6 VDC, 1A

2A, 24VDC

1A, 24VDC

1A, 120VAC 0.5A, 120VAC

Max. carrying current

Max. switching voltage

120VAC, 60VDC

120VA /

Max. switching power

Max. switching current

Min. switching load*

60AV / 24W

48WA

0.1mA,

100 mVDC

0.1mA,

100 mVDC

1mA, 1 VDC

1mA, 1VDC

Approximately 0.8 pF (between open contacts, adjacent contacts)

Approximately 7.5 pF (between coil and contacts)

Capacitance (at 10 MHz)

Life

Mechanical

Min. 20 x 10⁶operations

1A, 120VAC:

min. 100 x

10³ops.

0.5A, 120VAC: min. 200 x 10³operations

Electrical

2A, 24VDC: 1A, 24VAC: min. 500 x 10³operations

min. 200 x

10³ops. min.

Coil Data

Rated power

450 mW - 500 mW

220 - 250 mW

190mW - 270 mW

Operate power

100 mW - 130 mW

30 °C to +75 °C

Operating temperature range

-30 °C to +55 °C (no frost)

Max. 6 ms

Timing Data Operate (at nominal voltage)

Release (at nominal voltage)

Max. 3 ms

Insulation

Resistance (initial)

Min. 1,000MOhm at 500VDC

Standard: 500VAC (50/60Hz) 1min.

High Isolation: 1,000VAC (50/60Hz) 1min.

Open contacts

Dielectric strength

Standard: 500VAC (50/60Hz) 1min.

High Isolation: 1,500VAC (50/60Hz) 1min.

Contacts to coil

Surge strength

Coil to contacts 1,500V / 1 x 40µs standard wave

Other

Misoperation

Endurance

Misoperation

Endurance

10 to 55Hz double amplitude 3.28 mm

Min. 100m/s² (11 ± 1ms)

Vibration resistance

Shock

Min. 1,000m/s² (6 ± 1ms)

Weight

Approximately 3.5 g

* Minimum switching loads mentioned above are reference values. Please perform the conﬁrmation test with actual

load before production since reference values may vary according to switching frequencies, environmental conditions

and expected reliability levels.

MZ SERIES

FTR-K1 SERIES

n COIL RATING

Standard type

Rated Coil

Coil

Must Operate Must Release-

Coil Resistance

+/- 10% (Ohm)

Rated Power

Voltage

Code

(mW)

(VDC)

(VDC) *

1.5

1.05

2.1

0.08

0.15

0.23

0.25

0.3

4.5

3.15

3.5

450

4.2

180

320

720

1,280

4,600

6.3

0.45

0.6

8.4

12.6

16.8

33.6

0.9

1.2

2.4

500

High sensitive type

Rated Coil

Coil

Must Operate Must Release-

Coil Resistance

+/- 10% (Ohm)

Rated Power

Voltage

Code

(mW)

(VDC)

(VDC) *

1.5

1.05

2.1

0.08

0.15

0.23

0.25

0.3

190

4.5

100

3.15

3.5

120

180

4.2

200

400

6.3

0.45

0.6

700

8.4

1,100

1,600

2,800

8,500

10.5

12.6

16.8

33.6

0.75

0.9

1.2

2.4

270

Note: All values in the table are valid for 20°C and zero contact current.

* Speciﬁed operate values are valid for pulse wave voltage.

n SAFETY STANDARDS

Type

Compliance

Contact rating

UL 508, UL 60950-1

Flammability: UL 94-V0 (plastics)

[1A]

E 45026

0.5A, 120VAC (resistive)

1A, 24VDC (resistive)

[2A]

CSA

C22.2 No. 14

LR 35579

1A, 120VAC (resistive)

2A, 30VDC (resistive)

FTR-K1 SERIES

MZ SERIES

n CHARACTERISTIC DATA

n REFERENCE DATA

FTR-K1 SERIES

MZ SERIES

FTR-K1 SERIES

MZ SERIES

n DIMENSIONS

Schematics

PC board mounting

hole layout

(BOTTOM VIEW)

Dimensions

(BOTTOM VIEW)

MZ (F) type (Flux free type)

MZ (F)-K type (Plastic sealed type)

Unit: mm

FTR-K1 SERIES

MZ SERIES

RoHS Compliance and Lead Free Information

1. General Information

All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC

including amendments.

Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.

(Amendment to Directive 2002/95/EC)

All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes

at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf

Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise speciﬁed.

This material has been veriﬁed to be compatible with PbSn assembly process.

2. Recommended Lead Free Solder Proﬁle

Recommended solder Sn-3.0Ag-0.5Cu.

Flow Solder condition:

Pre-heating:

Soldering:

maximum 120˚C

dip within 5 sec. at

260˚C solder bath

Solder by Soldering Iron:

Soldering Iron

Temperature: maximum 360˚C

Duration:

maximum 3 sec.

We highly recommend that you conﬁrm your actual solder conditions

3. Moisture Sensitivity

Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.

4. Tin Whiskers

Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length

whisker was found by our in house test.

FTR-K1 SERIES

MZ SERIES

Fujitsu Components International Headquarter Ofﬁces

Japan

Europe

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (81-3) 5449-7010

Tel: (31-23) 5560910

Fax: (81-3) 5449-2626

Email: promothq@ft.ed.fujitsu.com

Web: www.fcl.fujitsu.com

Fax: (31-23) 5560950

Email: info@fceu.fujitsu.com

Web: emea.fujitsu.com/components/

North and South America

Fujitsu Components America, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Asia Paciﬁc

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

#01-01 Citilink Warehouse Complex

Singapore 118529

Fax: (1-408) 745-4970

Tel: (65) 6375-8560

Email: components@us.fujitsu.com

Web: http://us.fujitsu.com/components

Fax: (65) 6273-3021

Email: fcal@fcal.fujitsu.com

Web: http://www.fujitsu.com/sg/services/micro/components/

owners.

The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-

eral information purposes.

The use of the contents, data and information provided in this datasheet is at the users’ own risk.

Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-

sive, complete and up to date.

Fujitsu Components Europe B.V. and afﬁliated companies do however not accept any responsibility or liability on their behalf, nor on behalf

of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information

and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.

Nor do Fujitsu Components Europe B.V. and afﬁliated companies accept on their behalf, nor on behalf of its employees, any responsibility

or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ﬁtness for

particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,

comprehensiveness, usefulness, availability and completeness thereof. Rev. March 02, 2011

相关型号：