SY-3-K-UL [FUJITSU]
Power/Signal Relay;型号: | SY-3-K-UL |
厂家: | FUJITSU |
描述: | Power/Signal Relay 继电器 |
文件: | 总8页 (文件大小:179K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MINIATURE RELAY
1 POLE - 1 to 2 A (For Signal Switching)
SY Series
n FEATURES
l Very small size and light weight
l UL, CSA recognized
l Conforms to FCC rules and regulations part 68
- Dielectric strength 1000 VAC between coil and contacts
- Surge strength 1500 V
l High sensitivity
l Wide ambient temperature range (-30˚C to +90˚C)
l Wide operating range
l DIL pitch terminals
l Plastic sealed type
l RoHS compliant.
Please see page 7 for more information
n PARTNUMBER INFORMATION
SY
- 12
W - K - UL
[Example]
(a)
(b) (c)
(d) (e)
(a)
(b)
Relay type
SY
: SY-Series
Coil rated voltage
12
: 1.5.....24 VDC
Coil rating table at page 3
(c)
Contact style
Nil
W
: Single type
: Bifurcated type
(d)
(e)
Enclosure
Approvals
K
: Plastic sealed type
Nil
UL
: No UL/CSA marking on relay
: UL, CSA marking on relay
Note: For movable and stationary contact with gold overlay type, add suffix “–OH”
1
SY SERIES
n SPECIFICATION
Item
Single type
SY - ( ) - K
Bifurcated type
SY - ( ) W - K
Contact Data Configuration
Construction
1 form C (SPDT)
Single (cross bar)
Gold overlay silver palladium
Max. 100 mΩ at 1 A, 6 VDC
0.5A, 120VAC or 1A, 24VDC
2A
Bifurcated (cross bar)
Material
Resistance (initial)
Contact rating (resistive)
Max. carrying current
Max. switching voltage
Max. switching power
Max. switching current
Min. switching load *
120VAC / 60VDC
60AV / 24W
1A
1 mA, 1VDC
0.1 mA, 100mVDC
Approximately 1.4 pF (between open contacts)
Approximately 5.0 pF (between coil and contacts)
Capacitance (at 10 MHz)
Life
Mechanical
Min. 5 x 106 operations
Min. 100 x 103 operations
150 to 175 mW
Electrical (at contact rating)
Rated power
Coil Data
Operate power
75 to 86 mW
-30 °C to +90 °C (no frost)
(18V coil: +85 °C, 24V coil: +80 °C)
Operating temperature range
Timing Data Operate (at nominal voltage)
Max. 5 ms
Max. 2 ms
Release (at nominal voltage)
Insulation
Min. 1,000MOhm at
Min. 1,000MΩ at 500VDC
250VDC
Resistance (initial)
Open contacts
400VAC, 1min
300VAC, 1min
Dielectric strength
Surge strength
Contacts to coil
Coil to contacts
Misoperation
Endurance
1,000VAC, 1min
1,500V/ 10 x 160µs standard wave
10 to 55Hz double amplitude 1.5mm
10 to 55Hz double amplitude 1.5mm
300m/s² (11 ± 1ms)
Other
Vibration resistance
Misoperation
Endurance
Shock
1,000m/s² (6 ± 1ms)
Weight
Approximately 1.7 g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
SY SERIES
n COIL RATING
Rated Coil
Voltage
(VDC)
Must Operate
Voltage
Must Release
Voltage
Coil
Code
Coil Resistance
+/- 10% (Ohm)
Rated Power
(mW)
(VDC) *
(VDC) *
1.5
3
1.5
3
15
60
1.05
2.1
0.08
0.15
0.23
0.25
0.3
4.5
5
4.5
5
135
167
240
540
960
1,940
3,290
3.2
150
3.5
6
6
4.2
9
9
6.3
0.45
0.6
12
18
24
12
18
24
8.4
12.6
16.8
0.9
170
175
1.2
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type
UL
Compliance
Contact rating
UL 478
Flammability: UL 94-V0 (plastics)
UL 508
0.5A, 120VAC (resistive)
1A, 30VDC (resistive)
0.15A, 48VDC (resistive)
E 45026
CSA
C22.2 No. 14
LR 35579
3
SY SERIES
n CHARACTERISTIC DATA
4
SY SERIES
5
SY SERIES
n DIMENSIONS
l
PC board mounting
hole layout
l
Schematics
(BOTTOM VIEW)
l
Dimensions
(BOTTOM VIEW)
Unit: mm
6
SY SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including
amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature:
Duration:
maximum 360˚C
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
7
SY SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2012 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use,
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. July 30, 2012
8
相关型号:
SY-3W-K
Power/Signal Relay, SPDT, Momentary, 0.05A (Coil), 3VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
SY-4.5-K
Power/Signal Relay, SPDT, Momentary, 0.033A (Coil), 4.5VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
SY-4.5W-K
POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.033A (COIL), 4.5VDC (COIL), 150mW (COIL), 1A (CONTACT), 60VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
SY-5-K
Power/Signal Relay, SPDT, Momentary, 0.03A (Coil), 5VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明