UM1-12W-K [FUJITSU]

MINIATURE RELAY 1 POLE, 0.5A (HIGH FREQUENCE SIGNAL SWITCHING); 小型继电器1极, 0.5A (超高频信号的切换)
UM1-12W-K
型号: UM1-12W-K
厂家: FUJITSU    FUJITSU
描述:

MINIATURE RELAY 1 POLE, 0.5A (HIGH FREQUENCE SIGNAL SWITCHING)
小型继电器1极, 0.5A (超高频信号的切换)

继电器 开关
文件: 总8页 (文件大小:425K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MINIATURE RELAY  
1 POLE, 0.5A  
(HIGH FREQUENCE SIGNAL SWITCHING)  
UM1 SERIES  
RoHS Compliant  
n
FEATURES  
l Subminiature polarized relay  
l Excellent high frequency characteristics  
at 900 MHz  
—Isolation  
—Insertion loss : max. ꢀ dB  
V.S.W.R.  
: min. 60 dB  
(Impedance of  
the measuring  
devices is 75)  
}
: max. ꢀ.2  
l High reliabilityBifurcated contacts  
— Movable contact: gold overlay  
— Stationary contact: gold clad  
l Wide operating range  
l DIL pitch terminals  
l Plastic sealed type  
l Latching type available  
l RoHS compliant since date code: 0437T2  
Please see page 7 for more information  
n ORDERING INFORMATION  
UMꢀ  
L
D
ꢀ2  
W
K
[Example]  
(a) (b)  
(c) (d) (e)  
(f)  
(a)  
(b)  
Series Name  
UMꢀ: UMꢀ Series  
Operation Function  
Nil : Standard type  
L : Latching type  
(c)  
Number of Coil  
Nil : Single winding type  
D : Double winding type  
(d)  
(e)  
(f)  
Nominal Voltage  
Contact  
Refer to the COIL DATA CHART  
W : Bifurcated type (cross bar)  
K : Plastic sealed type  
Enclosure  
UM1 SERIES  
n SPECIFICATIONS  
Standard Type  
UM1-( ) W-K  
Single Winding Latching Type Double Winding Latching Type  
Item  
UM1L-( ) W-K  
UM1L-D ( ) W-K  
Contact  
Arrangement  
ꢀ form C (SPDT)  
Material  
Gold clad (stationary contact), gold plate (movable contact)  
Style  
Bifurcated (cross bar)  
Resistance (initial)  
Rating (resistive)  
Maximum ꢀ00 mΩ  
ꢀ0 mA 24 VDC ꢀ W (at 900 MHz)  
Maximum Carrying Current  
Maximum Switching Power  
Maximum Switching Voltage  
Maximum Switching Current  
Minimum Switching Load*ꢀ  
Isolation  
0.5 A  
ꢀ W (DC) ꢀ0 W (at 900 MHz)  
30 VDC  
ꢀ00 mA  
0.0ꢀ mA ꢀ0 mVDC  
Excellent  
High  
Minimum 60 dB (at 900 MHz), impedance of the measuring devices is 75Ω  
Maximum ꢀ dB (at 900 MHz), impedance of the measuring devices is 75Ω  
Maximum ꢀ.2 (at 900 MHz), impedance of the measuring devices is 75Ω  
Frequency  
Insertion Loss  
Character-  
istics  
Coil  
V.S.W.R.  
Nominal Power (at 20°C)  
Operate Power (at 20°C)  
Operating Temperature  
200 to 220 mW  
200 mW  
ꢀ00 mW  
400 mW  
ꢀ00 to ꢀꢀ0 mW  
200 mW  
–30°C to +80°C (no frost)  
–30°C to +60°C (no frost)  
Time Value Operate (at nominal voltage) Maximum 6 ms  
Release (at nominal voltage) Maximum 5 ms  
Maximum 6 ms (set)  
Maximum 6 ms (reset)  
Life  
Mechanical  
Electrical  
Vibration  
× ꢀ06 operations minimum  
3 × ꢀ05 operations minimum (at nominal load)  
ꢀ0 to 55 Hz (double amplitude of 3.3 mm)  
ꢀ0 to 55 Hz (double amplitude of 5.0 mm)  
500 m/s2 (ꢀꢀ ±ꢀ ms)  
Other  
Misoperation  
Resistance Endurance  
Shock Misoperation  
Resistance Endurance  
Weight  
ꢀ,000 m/s2 ( 6 ±ꢀ ms)  
Approximately 4 g  
*
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load  
before production since reference values may vary according to switching frequencies, environmental conditions and  
expected reliability levels.  
nINSULATION  
Item  
Standard  
Single latch  
Double latch  
Isolation (initial)  
Dielectric Strength  
Minimum 1,000 MΩ (at 500VDC)  
500VAC ꢀ min., (open contact / contact and shield terminals)  
ꢀ,000VAC ꢀ min., (coil contact/ coil and shield terminals)  
2
UM1 SERIES  
n COIL DATA CHART  
Nominal  
Coil resistance  
(±10%)  
Must operate  
voltage*1  
Must release  
voltage*1  
Nominal  
power  
MODEL  
voltage  
ꢀ.5 VDC  
3 VDC  
UMꢀ- ꢀ.5 W-K  
UMꢀ- 3 W-K  
UMꢀ- 4.5 W-K  
UMꢀ- 5 W-K  
UMꢀ- 6 W-K  
UMꢀ- 9 W-K  
UMꢀ- ꢀ2 W-K  
UMꢀ- ꢀ8 W-K  
UMꢀ- 24 W-K  
UMꢀ- 48 W-K  
ꢀꢀ.2Ω  
45 Ω  
+ꢀ.05 VDC  
+2.ꢀ VDC  
+3.ꢀ5 VDC  
+3.5 VDC  
+4.2 VDC  
+6.3 VDC  
+8.4 VDC  
+ꢀ2.6 VDC  
+ꢀ6.8 VDC  
+33.6 VDC  
+0.08 VDC  
+0.ꢀ5 VDC  
+0.23 VDC  
+0.25 VDC  
+0.3 VDC  
+0.45 VDC  
+0.6 VDC  
+0.9 VDC  
+ꢀ.2 VDC  
+2.4 VDC  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
220 mW  
4.5 VDC  
5 VDC  
ꢀ0ꢀ Ω  
ꢀ25 Ω  
6 VDC  
ꢀ80 Ω  
9 VDC  
405 Ω  
ꢀ2 VDC  
ꢀ8 VDC  
24 VDC  
48 VDC  
720 Ω  
ꢀ,620 Ω  
2,880 Ω  
ꢀ0,472 Ω  
Note: *1 Specified values are subject to pulse wave voltage.  
All values in the table are measured at 20°C.  
3
UM1 SERIES  
Nominal  
voltage  
Coil resistance  
(±10%)  
Set  
Reset  
Nominal  
power  
MODEL  
voltage*1  
voltage*1  
UMꢀL- ꢀ.5 W-K  
UMꢀL- 3 W-K  
UMꢀL- 4.5 W-K  
UMꢀL- 5 W-K  
UMꢀL- 6 W-K  
UMꢀL- 9 W-K  
UMꢀL- ꢀ2 W-K  
UMꢀL- ꢀ8 W-K  
UMꢀL- 24 W-K  
UMꢀL- 48 W-K  
UMꢀL-Dꢀ.5 W-K  
ꢀ.5 VDC  
3 VDC  
ꢀꢀ.2Ω  
45 Ω  
+ꢀ.05 VDC  
+2.ꢀ VDC  
+3.ꢀ5 VDC  
+3.5 VDC  
+4.2 VDC  
+6.3 VDC  
+8.4 VDC  
+ꢀ2.6 VDC  
+ꢀ6.8 VDC  
+33.6 VDC  
+ꢀ.05 VDC  
-ꢀ.05 VDC  
-2.ꢀ VDC  
-3.ꢀ5 VDC  
-3.5 VDC  
-4.2 VDC  
-6.3 VDC  
-8.4 VDC  
-ꢀ2.6 VDC  
-ꢀ6.8 VDC  
-33.6 VDC  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
200 mW  
400 mW  
4.5 VDC  
5 VDC  
ꢀ0ꢀ Ω  
ꢀ25 Ω  
6 VDC  
ꢀ80 Ω  
9 VDC  
405 Ω  
ꢀ2 VDC  
ꢀ8 VDC  
24 VDC  
48 VDC  
ꢀ.5 VDC  
720 Ω  
ꢀ,620 Ω  
2,880 Ω  
ꢀꢀ,520 Ω  
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
5.6Ω  
5.6Ω  
+ꢀ.05 VDC  
+2.ꢀ VDC  
+3.ꢀ5 VDC  
+3.5 VDC  
+4.2 VDC  
+6.3 VDC  
+8.4 VDC  
+ꢀ2.6 VDC  
+ꢀ6.8 VDC  
+33.6 VDC  
UMꢀL-D 3 W-K  
UMꢀL-D4.5 W-K  
UMꢀL-D 5 W-K  
UMꢀL-D 6 W-K  
UMꢀL-D 9 W-K  
UMꢀL-D ꢀ2 W-K  
UMꢀL-D ꢀ8 W-K  
UMꢀL-D 24 W-K  
UMꢀL-D 48 W-K  
3 VDC  
4.5 VDC  
5 VDC  
22.5Ω  
22.5Ω  
50.6Ω  
50.6Ω  
62.5Ω  
62.5Ω  
90 Ω  
90 Ω  
202.5Ω  
202.5Ω  
360 Ω  
360 Ω  
8ꢀ0 Ω  
8ꢀ0 Ω  
+2.ꢀ VDC  
+3.ꢀ5 VDC  
+3.5 VDC  
+4.2 VDC  
+6.3 VDC  
+8.4 VDC  
+ꢀ2.6 VDC  
+ꢀ6.8 VDC  
+33.6 VDC  
400 mW  
400 mW  
400 mW  
400 mW  
400 mW  
400 mW  
400 mW  
400 mW  
400 mW  
6 VDC  
9 VDC  
ꢀ2 VDC  
ꢀ8 VDC  
24 VDC  
48 VDC  
P ꢀ,440 Ω  
S ꢀ,440 Ω  
P 5,760 Ω  
S 5,760 Ω  
P: Primary coil S: Secondary coil  
Note: *1 Specified values are subject to pulse wave voltage.  
All values in the table are measured at 20°C.  
4
UM1 SERIES  
n CHARACTERISTIC DATA  
n REFERENCE DATA  
5
UM1 SERIES  
nDIMENSIONS  
l
Dimensions  
l
Schematics  
(Bottom view)  
UMꢀ, UMꢀL type (Non-latching type, single winding latching type)  
l
PC board  
mounting hole layout  
(Bottom view)  
UMꢀL-D type (Double winding latching type)  
Unit: mm  
6
UM1 SERIES  
RoHS Compliance and Lead Free Relay Information  
1. General Information  
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free  
now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info.  
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)  
Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward  
Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays.  
All signal and power relays also comply with RoHS. Please refer to individual data  
sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials above the threshold level  
that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE and DecaBDE).  
It has been verified that using lead-free relays in leaded assembly process will not cause any  
problems (compatible).  
l
l
l
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).  
2. Recommended Lead Free Solder Profile  
l
Recommended solder paste Sn-3.0Ag-0.5Cu.  
Solder condition  
Flow Solder condition:  
Pre-heating:  
Soldering:  
maximum 120˚C  
dip within 5 sec. at  
260˚C solder bath  
Solder by Soldering Iron:  
Soldering Iron  
Temperature: maximum 360˚C  
Duration:  
maximum 3 sec.  
We highly recommend that you confirm your actual solder conditions  
3. Moisture Sensitivity  
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays.  
4. Tin Whisker  
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable whisker length was found by our in  
house test.  
7
UM1 SERIES  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo ꢀ4ꢀ, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2ꢀ32 WV Hoofddorp  
Netherlands  
Tel: (8ꢀ-3) 5449-70ꢀ0  
Fax: (8ꢀ-3) 5449-2626  
Email: promothq@ft.ed.fujitsu.com  
Web: www.fcl.fujitsu.com/en/  
Tel: (3ꢀ-23) 55609ꢀ0  
Fax: (3ꢀ-23) 5560950  
Email: info@fceu.fujitsu.com  
Web: emea.fujitsu.com/components/  
North and South America  
Asia Pacific  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (ꢀ-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#0ꢀ-0ꢀ Citilink Warehouse Complex  
Singapore ꢀꢀ8529  
Fax: (ꢀ-408) 745-4970  
Tel: (65) 6375-8560  
Email: components@us.fujitsu.com  
Web: http://www.fujitsu.com/us/services/edevices/components/  
Fax: (65) 6273-302ꢀ  
Email: fcal@fcal.fujitsu.com  
Web: http://www.fujitsu.com/sg/services/micro/components/  
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev. December 23, 2008.  
8

相关型号:

UM1-18W-K

RF RELAY, SPDT, MOMENTARY, 0.011A (COIL), 18VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-24W-K

RF RELAY, SPDT, MOMENTARY, 0.008A (COIL), 24VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-3W-K

RF RELAY, SPDT, MOMENTARY, 0.067A (COIL), 3VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-4

Miniature Crystals

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
GOLLEDGE

UM1-4.5W-K

1 POLE, 0.5A (HIGH FREQUENCE SIGNAL SWITCHING)

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-4/231

Miniature Crystals

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
GOLLEDGE

UM1-48W-K

1 POLE, 0.5A (HIGH FREQUENCE SIGNAL SWITCHING)

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-5

Miniature Crystals

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
GOLLEDGE

UM1-5/231

Miniature Crystals

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
GOLLEDGE

UM1-5W-K

RF Relay, 1 Form C, SPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 0.1A (Contact), 30VDC (Contact), 900MHz, DC Input, Random, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-9W-K

RF RELAY, SPDT, MOMENTARY, 0.022A (COIL), 9VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FUJITSU

UM1-BB1318-30.000

Parallel - 3Rd Overtone Quartz Crystal, 30MHz Nom,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ILSI