VF-6MU [FUJITSU]
POWER RELAY 1 POLE-20, 25, 30 A (HEAVY POWER CONTROL); 功率继电器1 POLE - 20 , 25 , 30 A( HEAVY POWER CONTROL )型号: | VF-6MU |
厂家: | FUJITSU |
描述: | POWER RELAY 1 POLE-20, 25, 30 A (HEAVY POWER CONTROL) |
文件: | 总8页 (文件大小:338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POWER RELAY
1 POLE—20, 25, 30 A
(HEAVY POWER CONTROL)
RoHS compliant
VF SERIES
n FEATURES
l
l
l
l
UL, CSA, VDE recognized TV-ꢀ5 rated
ꢀ Form A (SPST-NO) contact
Heavy duty 20 to 30 A small power relay
High inrush current and high surge voltage
—
Inrush current 65 A
—Surge strength ꢀ0,000 V
l
l
l
Printed circuit coil terminals type available
Small package meets high density mounting requirement
RoHS compliant since date code: 0435L2
Please see page 7 for more information
n ORDERING INFORMATION
VF
B
–
6
H
U
[Example]
(a) (b) (*) (c) (d) (e)
(a)
(b)
Series Name
VF: VF Series
Nil : Top ·······All tab-terminal
B : Top ·······Tab-terminal (contacts)
: Bottom···PCB-terminal (coil and movable contact)
D : Top ·······Tab-terminal (coil)
Screw tight terminal
P : Top ·······Screw tight terminal
Terminal
(contacts)
(contacts)
: Bottom···PCB terminal (coil and movable contact)
(c)
(d)
(e)
Nominal Voltage
Contact Rating
Standard
Refer to the COIL DATA CHARAT
H : 30 A (applicable for D.P.)
M : 25 A
L : 20 A
U : UL, CSA, VDE rating acquired
Note: Actual marking omits hyphen (-) of (*)
ꢀ
VF SERIES
n COIL DATA CHART
MODEL
Nominal
voltage
Coil
resistance
(±10%)
Must
operate
voltage
Must
release
voltage
Nominal
power
30 A Type
25 A Type
20 A Type
VF ( ) - 3L
VF ( ) - 5L
VF ( ) - 6L
VF ( ) - 9L
VF ( ) -12L
VF ( ) -18L
VF ( ) -24L
VF ( ) -48L
VF ( ) -60L
VF (D or P) - 3H
VF (D or P) - 5H
VF (D or P) - 6H
VF (D or P) - 9H
VF (D or P) -12H
VF (D or P) -18H
VF (D or P) -24H
VF (D or P) -48H
VF (D or P) -60H
VF ( ) - 3M
VF ( ) - 5M
VF ( ) - 6M
VF ( ) - 9M
VF ( ) -12M
VF ( ) -18M
VF ( ) -24M
VF ( ) -48M
VF ( ) -60M
3 VDC
5 VDC
7.5Ω
20 Ω
30 Ω
67 Ω
2.1 VDC 0.3 VDC 1,200 mW
3.5 VDC 0.5 VDC 1,250 mW
4.2 VDC 0.6 VDC 1,200 mW
6.3 VDC 0.9 VDC 1,200 mW
8.4 VDC 1.2 VDC 1,200 mW
6 VDC
9 VDC
12 VDC
18 VDC
24 VDC
48 VDC
60 VDC
120 Ω
270 Ω 12.6 VDC 1.8 VDC 1,200 mW
480 Ω 16.8 VDC 2.4 VDC 1,200 mW
1,920 Ω 33.6 VDC 4.8 VDC 1,200 mW
3,000 Ω 42.0 VDC 6.0 VDC 1,200 mW
Note: All values in the table are measured at 20°C
2
VF SERIES
n SPECIFICATIONS
30 A Type
VFD, VFP- ( ) H
ꢀ form A (SPST-NO)
Silver alloy
25 A Type
VF ( ) - ( ) M
20 A Type
Item
VF ( ) - ( ) L
Contact
Arrangement
Material
Style
Single
Resistance (initial)
Maximum 30m Ω (at 1 A 6 VDC)
Resistive
Motor
30 A 250 VAC
2 HP 250 VAC
30 A
25 A 250 VAC
20 A 250 VAC
ꢀ HP 250 VAC
Rating
ꢀ.5 HP 250 VAC
25 A
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Minimum Switching Load*ꢀ
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
20 A
7,500 VA
6,250 VA
5,000 VA
250 VAC
30 A
25 A
20 A
ꢀA, ꢀ0V
Coil
1,200 to 1,250 mW
1,590 to 620 mW
–30°C to +65°C (no frost) (refer to the CHARACTERISTIC DATA)
Maximum 20 ms
Time Value Operate (at nominal voltage)
Release (at nominal voltage)
Maximum 5 ms
Life
Mechanical
5 × ꢀ06 operations minimum
ꢀ × ꢀ05 operations minimum (resistive load)
2 × ꢀ05 operations minimum (motor load)
ꢀ0 to 55 Hz (double amplitude of ꢀ.5 mm)
ꢀ0 to 55 Hz (double amplitude of ꢀ.5 mm)
200 m/s2 (ꢀꢀ ±ꢀ ms)
Electrical (at contact rating)
Other
Vibration
Misoperation
Endurance
Misoperation
Endurance
Resistance
Shock
Resistance
ꢀ,000 m/s2 ( 6 ±ꢀ ms)
Weight
Approximately 55 g
ꢀ
*
Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load
before production since reference values may vary according to switching frequencies, environmental conditions and ex-
pected reliability levels.
nINSULATION
Item
30A
25A
20A
Note
Resistance (initial)
Minimum 1,000 MΩ 1 min.
ꢀ,200 VAC ꢀ min.
at 500 VDC
Dielectric
Strength
open contacts
coil and contacts
4,000 VAC ꢀ min.
Surge Voltage (coil and contact)
ꢀ0,000 V
ꢀ.2 x 50µs standard wave
3
VF SERIES
n SAFETY STANDARD AND FILE NUMBERS
Type
Compliance
Contact rating
UL
UL 508 873
Flammability: UL 94-V0 (plastics)
[VF-( )-( ) L]
E56ꢀ40
20A, 250VAC (resistive)
ꢀhp, 250VAC/ꢀ25VAC
TV-ꢀ5 ꢀ20 VAC
CSA
C22.2 No. ꢀ4
LR 35579
[VF-( )-( ) M]
25A, 250VAC (resistive)
ꢀ.5 hp, 250VAC
TV-ꢀ5 ꢀ20VAC
[VFD, VFP-( )-H]
30A, 250VAC (resistive)
2 hp, 250VAC
TV-ꢀ5 ꢀ20VAC
VDE
0435
n CHARACTERISTIC DATA
4
VF SERIES
n REFERENCE DATA
n DIMENSIONS
l
Dimensions
l
Schematics
l
PC board mounting
hole layout
VF type
Unit: mm
5
VF SERIES
l
Dimensions
l
Schematics
l
PC board mounting
hole layout
VFB type
VFD type
VFP type
Unit: mm
6
VF SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
l
l
l
l
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 2ꢀ, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
7
VF SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (3ꢀ-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Asia Pacific
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://www.fujitsu.com/us/services/edevices/components/
Fax: (65) 6273-302ꢀ
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. February 4, 2008.
8
相关型号:
VF-9LU
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.133A (COIL), 9VDC (COIL), 1200mW (COIL), PANEL MOUNT, ROHS COMPLIANT
FUJITSU
VF-9MU
Power/Signal Relay, 1 Form A, SPST, Momentary, 0.133A (Coil), 9VDC (Coil), 1200mW (Coil), DC Input, Random, AC Output, Panel Mount, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明