FW4560 [FUJI]
Multiservice Provisioning Platform; 多服务供应平台
| 型号： | FW4560 |
| 厂家： | 
FUJI ELECTRIC |
| 描述： | Multiservice Provisioning Platform |
| 文件： | 总2页 (文件大小：311K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SDH Transport
FLASHWAVE 4560
Multiservice Provisioning Platform
The Challenge We Face
support these user demands with a shorter lead-time
Telecom carriers and network operators today are
constantly looking for ways to expand their network
and customer services in order to increase revenue
with minimum cost and time. This is the challenge
most vendors face, too. Flexibility, reliability, scalabili-
ty, and cost-effectiveness — these are just a few of the
capabilities that telecom carriers expect of next-gener-
ation network systems.
and minimum investment is one of the most critical
issues for every service provider to survive in today’s
highly competitive market. Here too, FLASHWAVE
4560 is the solution for you. Simply fit the Ethernet
units into FLASHWAVE 4560 shelf and you can turn
your traditional voice network into an advanced, data
and voice converged network. With two different
operational modes of Gigabit Ethernet transport,
point-to-point and bandwidth sharing, operators can
support end-user demands either way — with full
wire-speed transport, or with cost-effective best-effort
type of service over the selected number of VC-4
pipes. Furthermore, its virtual concatenation capabili-
ty enables operators to use their limited network
bandwidth without any loss.
The Solution We Provide
FLASHWAVE 4560 provides all the many quali-
ties to meet every telecom carrier’s needs. Its universal
interface slot structure and flexible VC-4/VC-12
cross-connect capability allow you to tailor its shelf as
your network demands, from a traditional STM-16 or
STM-64 ADM to an extensive hub with a number of
optical subtending rings. With the flexibility of “any
card in any slot” shelf architecture, and various network
application capabilities (ring, linear, and hub) in both
the metro and the backbone network, spare inventory
and training costs can be significantly reduced.
The FLASHWAVE 4560 gives you everything
you need to build next generation networks today.
In addition, the hub application with numerous
subtending rings reduces the cabling work that would
otherwise be required between each ring node, thereby
slashing installation time and costs. It also leads to less
miswiring and unintentional disconnection, for a
more reliable network.
Future-Proof Your Network Now
With the increasing growth in data traffic, the
Internet and enterprise Intranets, the capability to
Features and Specifications
Power Consumption
Advanced Features
Single shelf:
600W (maximum)
Twenty universal service interface module slots
Direct E1 drop from STM-64 aggregate
Protection
Wire-speed or bandwidth-shared Ethernet transport
288×288 VC-4 and 2016×2016 VC-12 cross-connect
Switch matrix, synchronization 1:1
E1/STM-1e
1:1
Architectures
STM-1o/STM-4:
STM-16/STM-64:
Ethernet
1+1 MSP, SNCP
2F-MS-SPRing,1+1 MSP, SNCP
unprotected
Terminal
Linear add/drop
2F-MS-SPRing
SNCP ring
Optics
Optical hub (STM-1, STM-4, and STM-16)
STM-1
1,310nm with SC or LC connectors
1,310nm with LC connectors
1,310nm/1,550nm with SC connectors
1,550nm with SC connectors
SC connector
STM-4
STM-16
STM-64
Gigabit Ethernet
Time-Slot Interchange
288×288 VC-4 switch fabric
2,016×2,016 VC-12 switch fabric
Any-port-to-any-port TSI
Virtual concatenation (VC-4-nV, n=1 to 8)
Operations Support
TL1 protocol over OSI/LCN, or IP/LCN
TCP/IP gateway functionality
FLEXRcraft interface and FLEXR-EM/NM network management support
Ring Interfaces
Maximum number of rings per shelf:
STM-64
STM-16
STM-4
STM-1
1 MS-SPRing/SNCP ring
Up to 4 MS-SPRings or 8 SNCP rings
Up to 32 SNCP rings
Synchronization
Internal Stratum-3 timing source
Synchronization status message (ITU-T standard)
Up to 40 SNCP rings
2Mbps/2MHz primary and secondary clock output/input
Line timing
Service Interface Modules
Maximum number of interfaces per shelf:
E1 (42 per card)
STM-1e (2 per card)
STM-1o (2 or 4 per card)
STM-4 (4 per card)
504
32
80
64
16
2
Operating Environment
Temperature:
Humidity:
0°C to 45°C (–5°C to 50°C: short-term)
5% to 85% (Non-condensing)
STM-16 (1 per card)
STM-64 (1 per card)
Physical Characteristics
10/100-Base T (8 per card)
Gigabit Ethernet P-P type (2 per card)
Gigabit Ethernet Bandwidth Shared type (2 per card)
80
32
8
Shelf:
Rack:
575(H)×500(W)×503(D)mm
2,200(H)×600(W)×600(D)mm
w/cable management spaces
Acquire Extensive Port-to-Port Connectivity
FLASHWAVE 4560
VC-4
Switch Fabric
288 X 288
Service
Module
1
Service
Module
1
SDH
SDH
VC-12
Switch Fabric
2,016 X 2,016
Router
SDH
Service
Module
20
Service
Module
20
Data
Switch Fabric
SDH
Router
Specifications are subject to change without notice. For the latest detailed information, contact your local representative.
All brand names and product names are trademarks and registered trademarks of their respective holders.
Third Edition, September 2003
FUJITSU LIMITED
For further information please contact:
Network Systems Group
©2001 FUJITSU LIMITED
4-1-1, Kamikodanaka, Nakahara-ku, Kawasaki, 211-8588 Japan
http://telecom.fujitsu.com/
Printed in Japan
BH1059-3C
相关型号：
©2020 ICPDF网 联系我们和版权申明