GM6603-1.8TB3TG [GAMMA]
3.0A LOW DROPOUT PRECISION REGULATOR; 3.0A低压差稳压精度型号: | GM6603-1.8TB3TG |
厂家: | GAMMA MICROELECTRONICS INC. |
描述: | 3.0A LOW DROPOUT PRECISION REGULATOR |
文件: | 总12页 (文件大小:514K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Description
Features
GM6603 series of positive adjustable and fixed
regulators is designed to provide 3A output current
with low dropout voltage performance.
Adjustable or Fixed Output
Output Current of 3.0A
On-chip trimming adjusts the reference voltage with
an accuracy of ±2%. Besides the features
Low Dropout, 1.15V max at 3A
Output Current
mentioned, GM6603 works well in post regulators
or micro-processor power supplies where low
voltage operation and fast transient response are
required. GM6603 includes over current protection
and thermal shutdown protection as well.
0.04% Line Regulation
0.2 % Load Regulation
Current Limit Protection
100% Thermal Limit Burn-In
Fast Transient Response
GM6605 is available in TO-220 and surface-mount TO-
252 and TO-263 packages.
Applications
Microprocessor Supply
Printer Supplies
Motherboards
Post Regulators for Switching Supplies
Telecommunication Systems
Typical Application Circuit
VIN > 4.75V
VOUT = 3.3V
3.0A
VOUT =3.45V
3.0A
VIN > 4.75V
3
VIN
2
VOUT
3
VIN
2
VOUT
GM6603-3.3
GM6603-adj
1
GND
1
ADJ
CIN
10μF
COUT
10μF
R1
CIN
10μF
133
1%
COUT
10μF
R2
232
1%
Fixed Output Voltage Version
Adjustable Output Voltage Version
Notes:
1. CIN needed if device is far from filter capacitors
2. COUT minimum value required for stability
1
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Marking Information and Pin Configurations (Top View) – Pb Free Product
TO 263
TO 252
(D-PAK)
TO 220
(D2-PAK)
GM6603
VVAYWW
GM6603
VVAYWW
GM6603
VVAYWW
VV: Output Voltage Codes (05: 5.0V, …A: ADJ)
A: Assembly/Test Site Code
Y: Year
WW: Week
Marking Information and Pin Configurations (Top View) – Green Product
TO 263
TO 252
(D-PAK)
TO 220
(D2-PAK)
GM6603G
VVAYWW
GM6603G
VVAYWW
GM6603G
VVAYWW
G: Green Product
VV: Output Voltage Codes (05: 5.0V, …A: ADJ)
A: Assembly/Test Site Code
Y: Year
WW: Week
2
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Ordering Information – Pb Free Product
Ordering Number
GM6603-ATA3T
VOUT
Package
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
Shipping
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
GM6603-ATA3R
GM6603-ATB3T
GM6603-ATC3T
GM6603-ATC3R
GM6603-1.8TA3T
GM6603-1.8TA3R
GM6603-1.8TB3T
GM6603-1.8TC3T
GM6603-1.8TC3R
GM6603-2.5TA3T
GM6603-2.5TA3R
GM6603-2.5TB3T
GM6603-2.5TC3T
GM6603-2.5TC3R
GM6603-3.3TA3T
GM6603-3.3TA3R
GM6603-3.3TB3T
GM6603-3.3TC3T
GM6603-3.3TC3R
GM6603-5.0TA3T
GM6603-5.0TA3R
GM6603-5.0TB3T
GM6603-5.0TC3T
GM6603-5.0TC3R
Adj
1.8V
2.5V
3.3V
5.0V
3
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Ordering Information – Green Product
Ordering Number
GM6603-ATA3TG
GM6603-ATA3RG
GM6603-ATB3TG
GM6603-ATC3TG
GM6603-ATC3RG
GM6603-1.8TA3TG
GM6603-1.8TA3RG
GM6603-1.8TB3TG
GM6603-1.8TC3TG
GM6603-1.8TC3RG
GM6603-2.5TA3TG
GM6603-2.5TA3RG
GM6603-2.5TB3TG
GM6603-2.5TC3TG
GM6603-2.5TC3RG
GM6603-3.3TA3TG
GM6603-3.3TA3RG
GM6603-3.3TB3TG
GM6603-3.3TC3TG
GM6603-3.3TC3RG
GM6603-5.0TA3TG
GM6603-5.0TA3RG
GM6603-5.0TB3TG
GM6603-5.0TC3TG
GM6603-5.0TC3RG
VOUT
Package
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
TO-263
TO-263
TO-220
TO-252
TO-252
Shipping
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
50 Units/Tube
800 Units / Reel
50 Units/Tube
80 Units/Tube
2,500 Units / Reel
Adj
1.8V
2.5V
3.3V
5.0V
4
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Absolute Maximum Ratings
PARAMETER
SYMBOL
RATINGS
UNITS
Input Voltage
VI
15
V
Internally
Limited
Power Dissipation
PD
W
Operating Junction Temperature
TJ
- 40 to 125
- 60 to 150
260
°C
°C
°C
Storage Temperature
Tstg
Lead Temperature 1.6mm (1/6 inch) from case for 10 seconds
Block Diagram
VIN
VOUT
For
fixed
output
ADJ
Options
GND
5
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Electrical Characteristics (TI = 25°C, Inless otherwise noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
IOUT = 10mA, VIN = 5.0V
1.238 1.250 1.262
1.225 1.250 1.275
1.782 1.800 1.818
1.764 1.800 1.836
2.475 2.500 2.525
2.460 2.500 2.540
3.267 3.300 3.333
3.247 3.300 3.353
4.950 5.000 5.050
4.920 5.000 5.080
Reference
Voltage
GM6603-A
VREF
V
10mA ≤ IOUT ≤ 3A,
1.5V ≤ VIN – VOUT ≤10V
IOUT = 10mA, VIN = 3.3V
GM6603-1.8
GM6603-2.5
GM6603-3.3
GM6603-5.0
10mA ≤ IOUT ≤ 3A,
1.5V ≤ VIN – VOUT ≤10V
IOUT = 10mA, VIN = 4V
10mA ≤ IOUT ≤ 3A,
1.5V ≤ VIN – VOUT ≤10V
Output
Voltage
VO
V
IOUT = 10mA, VIN = 4.8V
10mA ≤ IOUT ≤ 3A,
1.5V ≤ VIN – VOUT ≤10V
IOUT = 10mA, VIN = 6.5V
10mA ≤ IOUT ≤ 3A,
1.5V ≤ VIN – VOUT ≤10V
GM6603-A
IOUT = 10mA
GM6603-1.8
GM6603-2.5
GM6603-3.3
GM6603-5.0
IOUT = 10mA, 3.3V ≤VIN ≤10V
IOUT = 10mA, 4V ≤VIN ≤10V
IOUT = 10mA, 4.8V ≤VIN ≤10V
IOUT = 10mA, 6.5V ≤VIN ≤10V
Line
Regulation
0.04
0.20
%
VOI
VIN –VOUT =1.5V,
10mA ≤ IOUT ≤ 3A
GM6603-A
GM6603-1.8
GM6603-2.5
GM6603-3.3
GM6603-5.0
VIN = 3.3V, 10mA ≤ IOUT ≤ 3A
VIN = 4.0V, 10mA ≤ IOUT ≤ 3A
Load
Regulation
0.2
0.40
%
VOL
VIN = 4.8V, 10mA ≤ IOUT ≤ 3A
VIN = 6.5V, 10mA ≤ IOUT ≤ 3A
IOUT = 3A
Dropout Voltage
Current Limit
VD
ICL
1.15
4.5
3
1.3
7
V
A
VIN –VOUT =3V
3
Minimum Load Current
GM6603-1.8
IO(MIN)
VIN = 5.0V
mA
VIN = 3.3V, 10mA ≤ IOUT ≤ 3A
GM6603-2.5
GM6603-3.3
GM6603-5.0
VIN = 4.0V, 10mA ≤ IOUT ≤ 3A
VIN = 4,8V, 10mA ≤ IOUT ≤ 3A
VIN = 6.5V, 10mA ≤ IOUT ≤ 3A
Quiescent
Current
IQ
7
10
90
mA
Adjust Pin
Current
IOUT = 10mA,
1.5V ≤VIN – VOUT ≤10V
GM6603-A
IADJ
40
μA
Temperature Coefficient
Ripple Rejection
IOUT = 10mA, VIN – VOUT = 1.5V
IOUT = 3A, VIN – VOUT = 1.5V
0.005
80
%/°C
dB
RA
60
6
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Application Information
GM6603 series linear regulators provide fixed and adjustable output voltages at currents up to 3.0A.
These regulators are protected against over-current conditions and include thermal shutdown protection.
The GM6603hasa compositePNP-NPN outputtransistor and require an output capacitor for stability.
A detailed procedure for selecting this capacitor is as below:
Stability Considerations
The circuit design used in the GM6603 series requires the use of an output capacitor as part of the device
frequency compensation. The addition of 150µF aluminum electrolytic or a 22µF solid tantalum on the output
will ensure stability for all operating conditions.
When the adjustment terminal is bypassed with a capacitor to improve the ripple rejection, the requirement
for an output capacitor increases. The value of 22µF tantalum or 150µF aluminum covers all cases of
bypassing the adjustment terminal. Without bypassing the adjustment terminal smaller capacitors can be
used with equally good results.
To ensure good transient response with heavy load current changes capacitor values on the order of 100µF
are used in the output of many regulators. To further improve stability and transient response of these
devices larger values of output capacitor can be used.
Protection Diodes
Unlike older regulators, the GM6603 family does not need any protection diodes between the adjustment pin
and the output and from the output to the input to prevent over stressing the die. Internal resistors are
limiting the internal current paths on the GM6603 adjustment pin, therefore even with capacitors on the
adjustment pin no protection diode is needed to ensure device safety under short-circuit conditions.
Microsecond surge currents of 50A to 100A can be handled by the internal diode between the input and
output pins of the device. In normal operations it is difficult to get those values of surge currents even with
the use of large output capacitances. If high value output capacitors are used, such as 1000µF to 5000µF at
the input pin, is instantaneously shorted to ground, damage can occur. A diode from output to input is
recommended, when a crowbar circuit at the input of the GM6603 is used. Normal power supply cycling or
even plugging and unplugging in the system will not generate current large enough to do any damage.
The adjustment pin can be driven on a transient basis ±25V, with respect to the output without any device
degradation. As with any IC regulator, none the protection circuitry will be functional and the internal
transistors will break down if the maximum input to output voltage differential is exceeded.
1N4002
VIN
VOUT
GM6603-Adj
COUT
150μF
R1
ADJ
CADJ
R2
10μF
Diodes between the input and output are
not usually needed.
Ripple Rejection
The ripple rejection values are measured with the adjustment pin bypassed. The impedance of the adjust pin
capacitor at the ripple frequency should be less than the value of R1 (normally 100. to 120.) for a proper
bypassing and ripple rejection approaching the values shown. The size of the required adjust pin capacitor is
a function of the input ripple frequency. If R1=100. at 120Hz the adjust pin capacitor should be 25µF. At
10kHz only 0.22µF is needed. The ripple rejection will be a function of output voltage, in circuits without an
adjust pin bypass capacitor. The output ripple will increase directly as a ratio of the output voltage to the
reference voltage (VOUT / VREF).
7
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Output Voltage Sensing
GM6603 series is a three-terminal regulator, so it cannot provide true remote load sensing. Load
regulation is limited by the resistance of the conductors connecting the regulator to the load. For best
results, GM6603 should be connected as shown 1n F1gure 2.
Conductor
Parasitic
Resistance
Conductor
Parasitic
Resistance
VOUT
VIN
RC
RC
VOUT
VIN
GM6603-A
GM6603-3.3
R1
ADJ
RLOAD
RLOAD
GND
R2
(a) Fixed version
(b) Adjustable version
Figure 1. Conductor Parasitic Resistance Effects are Minimized by
this Grounding Scheme.
Calculating Power Dissipation and Heat Sink Requirements
GM6603 series include thermal shutdown and current limit circuitry to protect the devices. However, high
power regulators normally operate at high junction temperatures so it is important to calculate the power
dissipation and junction temperatures accurately to be sure to use an adequate heat sink. The case is
connected to VOUT on GM6603, so electrical isolation may be required for some applicat1ons. Thermal
compound should always be used with high current regulators like GM6603.
The thermal characteristics of an IC depend on four factors:
1.
2.
3.
4.
Maximum Ambient Temperature TA (°C)
Power Dissipation PD (Watts)
Maximum Junction Temperature TJ (°C)
Thermal Resistance Junction to amb1ent JA
The relationship of these four factors is expressed by equation (1):
TJ = TA + PD x JA
Maximum ambient temperature and power dissipation are determ1ned by the design while the maximum
junction temperature and thermal resistance depend on the manufacturer and the package type.
The maximum power dissipation for a regulator is expressed by equation (2):
PD(MAX) = (VIN(MAX) – VOUT(MIN) ) x IOUT(MIN) + VIN(MIN) x IQ
where:
VIN(MAX) is the maximum input voltage,
VOUT(MIN) is the minimum output voltage,
IOUT(MAX) is the maximum output current
IQ is the max1mum quiescent current at IOUT(MAX)
.
A heat sink effect1vely increases the surface area of the package to improve the flow of heat away
from the IC into the air. Each material in the heat flow path between the IC and the environment has a
thermal resistance. Like series electrical resistances, these resistance are summed to determine JA,
the total thermal resistance between the junction and the air. This is expressed by equation (3):
JA = JC + CS + SA
where:
JC is the thermal resistance of Junction to Case,
CS is the thermal resistance of Case to Heat Sink,
SA is the thermal resistance of Heat Sink to Ambient air.
The value for JA is calculated using equation (3) and the result can be substituted in equation (1). The
value for CS is 3.5°C/W for a given package typed based on an average d1ie size. For a high current
regulator such as GM6603, the majority of the heat is generated in the power transistor sect1on.
8
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Typical Performance Characteristics
1.12
1.15
+0.3
+0.2
+0.1
TCASE = 0°C
1.10
1.05
1.00
0.95
TCASE = 25°C
0
0.90
-0.1
TCASE = 125°C
0.85
0.80
0.75
-0.2
-0.3
0
0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00
Output Current(A)
0
30
60
90
120
TJ (°C)
Figure 1. Dropout Voltage vs. Output Current
Figure 2. Bandgap Reference Voltage Deviation
Vs. Temperature
90
80
70
0.65
0.60
0.55
0.50
0.45
0.40
TCASE = 0°C
TCASE = 25°C
60
50
TCASE = 125°C
40
30
20
10
101
102
103
Frequency(Hz)
Figure 3. Ripple Rejection vs. Frequency
104
105
106
1
2
3
4
5
6
7
8
VIN - VOUT (V)
Figure 4. Minimum Load Current vs. VIN - VOUT
9
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Package Outline Dimensions – TO263
0 . 3 9 0 - 0 . 4 1 5
( 9 . 9 0 6 - 1 0 . 5 4 1 )
0 . 1 0 5 - 0 . 1 8 0
( 4 . 1 9 1 - 4 . 5 7 2 )
0 . 0 4 5 - 0 . 0 5 5
( 1 . 1 4 3 - 1 . 3 9 7 )
0 . 0 6 0
( 1 . 5 2 4 )
T Y P
51
T Y P
0 . 3 3 0 - 0 . 3 7 0
( 8 . 3 8 2 - 9 . 3 9 8 )
0 . 0 5 9
( 1 . 4 9 9 )
T Y P
0 . 1 4 3 + 0 . 0 1 2
0 . 1 4 3 - 0 . 0 0 2
( 3 . 6 3 2 + 0 3 0 5 )
( 3 . 3 6 2 - 0 . 5 0 8 )
0 . 0 5 0 + / - 0 . 0 1 2
( 1 . 2 7 0 + / - 0 . 3 0 5 )
0 . 0 2 0 - 0 . 0 3 9
( 0 . 5 1 0 - 0 . 9 9 0 )
0 . 0 1 3 - 0 . 0 2 3
( 0 . 3 3 0 - 0 . 5 8 4 )
0 . 0 9 0 - 0 . 1 1 0
( 2 . 2 8 6 - 2 . 7 9 4 )
0 . 0 5 0
( 1 . 2 7 0 )
Package Outline Dimensions – TO220
4.50 ± 0.20
9.90 ± 0.20
8.70
8.0
7.0
3.60 ± 0.20
1.30 ± 0.10
+0.1
2.80 ± 0.10
1.30
-0.05
1.70
3.70
4.60
± 0.20
1.50 DP0.20
3°
0.9
7.0
8.40
3°
3°
1.46
1.00
45°
3.00
3-R0.2
1.27 ± 0.10
0.80 ± 0.10
1.52 ± 0.10
+0.1
-0.05
0.50
2.40 ± 0.20
2.54 TYP
(2.54 ± 0.20)
3°
3°
2 - R 0.3
Unit: mm
10.00 ± 0.20
10
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Package Outline Dimensions – TO252
0.039 – 0.050
(1.020 – 1.270)
0.205 – 0.215
0.018 – 0.023
(0.460 – 0.580)
(5.210 – 5.460)
0.055 – 0.080
(1.400 – 2.030)
S E A T I N G P L A N
0.370 – 0.410
(9.400 – 10.420)
0.210 – 0.228
(5.330 – 5.800)
0.020
(0.510)
MIN
0.045 – 0.060
(1.150 – 1.520)
0.090
(2.285)
TYP
0.018 – 0.023
(0.460 – 0.580)
0.030 – 0.045
(0.760 – 1.140)
0.180
(4.570)
TYP
Note:
Pb-free products:
RoHS compliant and compatible with the current require-ments of IPC/JEDEC J-STD-020.
Suitable for use in Pb-free soldering processes with 100% matte tin (Sn) plating.
Green products:
Lead-free (RoHS compliant)
Halogen free(Br or Cl does not exceed 900ppm by weight in homogeneous material and total of
Br and Cl does not exceed 1500ppm by weight)
11
GM6603
3.0A LOW DROPOUT
PRECISION REGULATOR
Ordering Number
G
M 6603 - 1.8 TA3
T
G
APM Circuit
Gamma Type
Micro
Output
Voltages
Package
Type
Shipping
Type
A: ADJ
TA3: TO263
TB3: TO220
TC3: TO252
Blank:
Pb-free
G:Green
T: Tube
R: Tape & Reel
1.8: 1.8V
2.5: 2.5V
3.3: 3.3V
5.0: 5.0V
Note:
Pb-free products:
RoHS compliant and compatible with the current require-ments of IPC/JEDEC J-STD-020.
Suitable for use in Pb-free soldering processes with 100% matte tin (Sn) plating.
Green products:
Lead-free (RoHS compliant)
Halogen free(Br or Cl does not exceed 900ppm by weight in homogeneous material and total of
Br and Cl does not exceed 1500ppm by weight)
128
10
6
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明