10D6AW4_2415S1.5 [GAPTEC]
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated;型号: | 10D6AW4_2415S1.5 |
厂家: | GAPTEC |
描述: | 10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated |
文件: | 总5页 (文件大小:2472K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
10D6AW4_1.5 Series
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
10 Watt
4:1 wide input voltage range
Efficiency up to 88%
1500VDC/500VAC Isolation
Short circuit protection (SCP)
Input under-voltage, over-
current, over-voltage
protection
Operating temperature:
-40°C to +85°C
The 10D6AW4_1.5 series are isolated 10W DC-DC products with 4:1 input
voltage, 500VAC/1500VDC isolation, input under-voltage protection,
output over-voltage, over-current and short circuit protection, which
make them widely applied in industrial control, electricity, instruments
and communication fields.
Industry standard pinout
RoHS compliance
No-load power consumption
as low as 0.096W
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
40°C TYP
Item
Test condition
Min
Typ
1
Max
3
Units
%
Output voltage
accuracy
Free air convection
-40°C~+85°C
Line regulation
Full load, input voltage
from low to high
0.2
0.5
%
Operation temperature range:
Storage temperature range:
Pin welding resistance temperature:
-55°C ~+125°C
Load regulation
5% to 100% load
0.5
1.0
%
300°C MAX, 1.5mm from case for 10 sec
Transient recovery
time
25% load step change
300
500
µs
Reflow soldering temperature:
(Only for models with housing)
Peak temp. ≤245°C, maximum duration
time ≤60s at 217°C. For actual
application, please refer to IPC/JEDEC
J-STD-020D.1.
Transient response
deviation
25% load step change
100% load
3
5
%
Temperature
coefficient
0.03
%/°C
Vibration:
10-55Hz, 10G, 30 Min. along X, Y and Z
< 95%
Storage humidity range:
Case material:
MTBF:
Ripple & Noise*
Trim
20MHz Bandwidth
50
5
100
mVp-p
%Vo
Aluminium Alloy
Nominal input voltage
Input voltage range
>1,000,000 hours
Over Voltage
Protection
110
110
160
%Vo
Weight:
6.7g /5.7g (without case)
Over Voltage
Protection
Input voltage range
140
350
200
%Io
Input specifications
Switching frequency** PWM mode
KHz
Item
Test condition
Min
Typ
Max
Units
*
Test ripple and noise by “parallel cable” method. See detailed operation
instructions at Testing of Power Converter section, application notes.
Input current
(full load / no load)
Nominal input
voltage
• 5VDC input
• 12VDC input
• 15VDC input
** This series of products using reduced frequency technology, the switching
frequency is test value of full load. When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
496/4
479/3
474/4
508/40
490/12
485/15
mA
mA
mA
Reflected ripple
current
Nominal input
voltage
40
mA
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
Surge voltage
Starting voltage
Shutdown voltage
Input filter
1sec. max.
-0.7
5.5
50
9
VDC
VDC
VDC
Isolation voltage
(Tested for 1 minute
and leakage current
less than 5mA)
• Input-output
• Input/Output-case
(for models with case)
1500
1500
VDC
VDC
6.5
• Input-output
• Input/Output-case
(for models with case)
500
500
VAC
VAC
Pi
Hot plug
unavailable
• Models ON
Ctrl*
Ctrl pin connected to GND or low
level (0-1.2VDC)
Ctrl pin suspended or connected to
High level (2.4-12VDC)
6mA (TYP)
Isolation resistance
(Test at 500VDC)
• Input-output
• Input/Output-case
(for models with case)
1000
MΩ
pF
(operating
temperature range)
• Models OFF
Isolation capacitance
Input/Output,
100KHz/0.1V
1000
• Input current
when switched
off (@25°C)
* The voltage of Ctrl pin is relative to input pin GND.
Example:
10D6AW4_2405S1.5
10= 10Watt; D6= DIP6; A= series; W4= wide input (4:1) 9-36Vin;
5Vout; S= Single output; 1.5= 1500VDC
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10D6AW4_1.5 – Rev. 2019-1.0
Specifications subject to change without notice.
10D6AW4_1.5 Series
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
DC-DC Converter
EMC specifications
EMI
CE
CISPR22/EN55022
CISPR22/EN55022
CLASS A (bare component)
CLASS B (see EMC recommended circuit ①)
EMI
RE
CLASS A (Without External Circuit)
CLASS B (see EMC recommended circuit ②)
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact 4KV
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
10V/m
EFT
Surge
CS
2KV (see EMC recommended circuit ①)
line to line 2KV (see EMC recommended circuit ①)
3 Vr.m.s
Part Number
Input Voltage [VDC]
Output Voltage
[VDC]
Output Current [mA]
Max Min
Capacitive load
Efficiency**
[%, Typ.]
Nominal
Range
Max*
40
[µF, max.]
10D6AW4_2405S1.5
10D6AW4_2412S1.5
10D6AW4_2415S1.5
24
24
24
9-36
5
2000
833
0
2200
84
87
88
9-36
40
12
15
0
0
680
9-36
40
667
470
*
Absolute maximum rating without damage on the converter, but it isn‘t recommended;
** Efficiency is measured In nominal input voltage and rated output load.
Notes: DIP package without housing: 10DF6AW_xxyyS1.5RP
Typical characteristics
Page 2 of 5
10D6AW4_1.5 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10D6AW4_1.5 Series
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
DC-DC Converter
Efficiency
10D6AW4_2405D1.5
10D6AW4_2405D1.5
10D6AW4_2415S1.5
10D6AW4_2415S1.5
Recommended circuit
Recommended Circuit
All the DC/DC converters of this series are tested according to the re-
commended circuit (see Fig. 1) before delivery.
If it is required to further reduce input and output ripple, properly
increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the
capacitance is no larger than the max. capacitive load of the product.
Figure 1
Page 3 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10D6AW4_1.5 – Rev. 2019-1.0
Specifications subject to change without notice.
10D6AW4_1.5 Series
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
DC-DC Converter
EMC solution-recommended circuit
Model
FUSE
C0
Vin: 24V
Choose according to actual input current
680µF/100V
4.7µF/50V
C1/C3/C4
C2
470µF/100V
10µF/25V
C5
LCM
3.3µH
Figure 2
CY1, CY2
1000pF/≥2000VDC
Note:
Part ① in the Fig. 2 is used for EMI test and part ② for EMC filtering;
selected based on needs.
For models with housing: the housing should be connected to input
pin GND when testing EMC performance.
Trim
Application of Trim and calculation of Trim resistance
Calculation formula of Trim resistance:
It is not allowed to connect modules output in parallel to enlarge the power.
Page 4 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10D6AW4_1.5 – Rev. 2019-1.0
Specifications subject to change without notice.
10D6AW4_1.5 Series
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
DC-DC Converter
Mechanical dimensions with housing
Mechanical dimensions without housing
Note:
1. The maximum capacitive load offered were tested at input voltage range and
full load.
2. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and
rated output load.
3. All index testing methods in this datasheet are based on Company’s corporate
standards.
4. We can provide product customization service, please contact our technicians
directly for specific information.
5. Products are related to laws and regulations
6. Our products shall be classified according to ISO14001 and related
environmental laws and regulations, and shall be handled by qualified units.
Page 5 of 5
10D6AW4_1.5 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明