10DCPE_05S4 [GAPTEC]

10W - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated;
10DCPE_05S4
型号: 10DCPE_05S4
厂家: GAPTEC    GAPTEC
描述:

10W - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated

文件: 总6页 (文件大小:695K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
DC-DC Converter  
10 Watt  
The 10DCPE_4 series is a regulated DC-DC converter with an ultra-wide and ult-  
ra-high DC input of 100-1000VDC. The products feature high efficiency, high  
reliability, high insulation and a high level of safety protection. This type of  
power supply is widely used in renewable energy industries such as photovol-  
taic, power generation, energy storage, inverters and high-voltage DC conver-  
sions. The converters provide multiple protection features and guarantee stable  
and safe operating environments even under abnormal working conditions. For  
extremely harsh EMC environment, we recommend using the application circuit  
show in Design Reference of this datasheet.  
10:1 ultra-wide input voltage  
range: 100 ~ 1000VDC  
Operating temperature:  
-40°C ~ +70°C  
Reverse input voltage  
protection  
Over voltage protection  
Short circuit protection (SCP)  
Input against reverse  
protection  
High reliability, long life,  
three years warranty  
EN62109 safety approval  
(pending)  
4000VAC high isolation  
voltage  
High efficiency,  
low ripple & noise  
Common specifications  
Short circuit protection:  
Temperature rise at full load:  
Cooling:  
Output specifications  
Continuous, automatic recovery  
25°C MAX (Ta = 25°C, 100% load)  
Free air convection  
-40°C~+70°C  
Item  
Test condition  
Min  
Typ  
0.5  
Max  
1
Units  
%
Line regulation  
Load regulation  
0.5  
1
1
%
%
Operation temperature range:  
Storage temperature range:  
Case temperature:  
Output voltage  
accuracy  
2
-40°C ~+105°C  
90°C MAX  
Ripple & Noise*  
20MHz Bandwidth  
100  
200  
mVp-  
p
Welding temperature:  
Wave-soldering: 260 5°Cꢀ time:5~10s  
Manual-welding: 360 10°Cꢀ time:3~5s  
Under input volta-  
ge protection  
Under voltage protection  
range: 175~185V  
Under voltage release range:  
185~195V  
Hot swap:  
Forbidden  
Case Material Grade:  
Black flame-retardant and heat-  
resistant plastic (UL94V-0)  
Over input voltage  
protection  
• (Feedback-clamp) Voltage  
limited < 7.5V  
Install:  
PCB  
Storage humidity range:  
Temperature coefficient:  
Delay time:  
< 95% (%RH)  
0.02%ꢁ°C MAX  
500ms MAX  
>300,000 hours  
*Test ripple and noise by “parallel cable” method.  
MTBF (MIL-HDBK-217F@25°C):  
Example:  
10DCPE_05S4  
10 = 10Watt; DC = DIP Case; P = Photovoltaic; E = series; 05 = 5Vout;  
S = Single output; 4 = 4kVAC isolation;  
Input specifications  
Item  
Test condition  
Min  
100  
Typ  
Max  
Units  
VDC  
Input voltage range  
Input current  
1000  
• 200VDC input  
• 600VDC input  
• 1000VDC input  
38  
15  
8
mA  
mA  
mA  
External input fuse  
1Aꢁ1500VDC, required  
Note:  
Isolation specifications  
1. Unless otherwise specified, all specifications above are measured at rated  
input voltage and rated output load, TA = 25°C, humidity < 75%ꢀ  
2. All specifications stated in this datasheet are subject to the above listed  
models only. For specifications of non-standard models, please contact our  
technical support team.  
Item  
Test condition  
Tested for 1 minute  
Min  
Typ  
Max  
Units  
VAC  
MΩ  
Isolation voltage  
4000  
100  
Isolation resistance Test at 500VDC  
Page 1 of 6  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
EMC specifications  
EMI  
CE  
CISPR32ꢁEN55032  
CISPR32ꢁEN55032  
IECꢁEN61000-4-2  
IECꢁEN61000-4-3  
IECꢁEN61000-4-4  
IECꢁEN61000-4-5  
IECꢁEN61000-4-6  
CLASS A (Recommended Circuit Refer to EMC recommended circuit)  
CLASS A (Recommended Circuit Refer to EMC recommended circuit)  
Contact 6KVꢁAir 8KV perf. Criteria B  
EMI  
RE  
EMS  
EMS  
EMS  
EMS  
EMS  
ESD  
RS  
10Vꢁm  
4KV  
perf. Criteria A  
EFT  
Surge  
CS  
perf. Criteria B (External Circuit Refer to recommended circuit, 1 )  
perf. Criteria B (External Circuit Refer to recommended circuit, 1 )  
perf. Criteria A  
2KV  
10 Vr.m.s  
Product Selection Guide  
Part Number  
Power  
[W]  
Nominal Output  
[V; Vo]  
Current Output  
[A; lo]  
Capacitive load  
[µF, Max.]  
Ripple & Noise  
[mV, Max.]  
Efficiency  
[%, max]  
10DCPE_05S4  
10DCPE_09S4  
10DCPE_24S4  
10  
10  
10  
5
9
2
6000  
4000  
470  
200  
200  
200  
72  
76  
80  
1.11  
24  
0.42  
Note: * Use suffix ”/CM” for chassis and suffix ”/DR” for DIN-Rail mounting.  
Product Characteristic Curve  
1 = 5DCPE_4  
2 = 10DCPE_4  
3 = 15DCPE_4  
5DCPE_4 and 10DCPE_4  
15DCPE_4  
Page 2 of 6  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
Efficiency  
5DCPE_05S4  
5DCPE_05S4  
10DCPE_24S4  
10DCPE_09S4  
10DCPE_05S4  
10DCPE_24S4  
10DCPE_09S4  
10DCPE_05S4  
15DCPE_15S4  
15DCPE_12S4  
15DCPE_24S4  
15DCPE_15S4  
Page 3 of 6  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
Design reference  
5DCPE_05S4  
10DCPE_05S4  
10DCPE_09S4  
10DCPE_24S4  
15DCPE_12S4  
15DCPE_15S4  
15DCPE_24S4  
Page 4 of 6  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
Dimensions and recommended layout  
Chassis mounting  
Page 5 of 6  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
10DCPE_4 series  
10W - Single Output DC-DC Converter - Ultra Wide Input Range -  
High Isolated & Regulated  
Din-Rail mounting  
Page 6 of 6  
10DCPE_4 – Rev. 2020-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  

相关型号:

10DCPE_09S4

10W - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DCPE_24S4

10W - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DCPE_4

10W - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DCPW

10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DCPW_05S4

10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DCPW_4

10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC

10DDA10

DIODE - 1A 100V TJ=150C
NIEC

10DDA10_15

Standard Recovery Diode
NI

10DDA10_2015

Standard Recovery Diode
NI

10DDA20

DIODE - 1A 200V TJ = 150C
NIEC

10DDA20_15

Standard Recovery Diode
NI

10DDA20_2015

Standard Recovery Diode
NI