15DMWE4_2405S1.5 [GAPTEC]
15W - Single Output - Wide Input - Isolated & Regulated;
| 型号： | 15DMWE4_2405S1.5 |
| 厂家： | 
GAPTEC |
| 描述： | 15W - Single Output - Wide Input - Isolated & Regulated |
| 文件： | 总7页 (文件大小：2947K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
DC-DC Converter
15 Watt
Wide 4:1 input voltage range
High efficiency up to 91%
Short circuit protection (SCP)
Isolation voltage: 1.5kVDC
Over-current, over-voltage,
under-voltage protection
RoHS compliant
Operating temperature range:
The 15DMWE4_1.5 series are isolated 15W DC/DC converters with 2:1
input voltage. They feature efficiency up to 91%, 1500VDC isolation,
operating temperature of -40°C to +105°C, input under-voltage protec-
tion, output over-voltage, output over-current, output short circuit pro-
tection and EMI meets CISPR32/EN55032 CLASS A.
-40°C to +105°C
Meets CISPR32/EN55032 CLASS
A, no external components
International standard pin-out
Wiring and rail mounting
products featuring anti-
reverse connection for input
EN62368, UL62368 approved
They are widely applied in industrial control, electric power, instru-
ments and communication fields. Extension packages with wiring
mounting and rail mounting also enable them with reverse voltage pro-
tection.
UL-62368-1 (E347551)
Common specifications
Short circuit protection:
Cooling:
Input specifications
Hiccup, continuous, self-recovery
Free air convection
Item
Test condition
Min
Typ
Max
Units
Input current
(full load/no load)
24VDC
• 3.3V output
• 5V output
• 12V output
• 15V output
• 24V output
625/30
694/30
694/6
687/6
640/50 mA
Operation temperature range:
• 3.3V/5V output: 40°C~+95°C
• others: -40°C~+105°C
710/50
710/15
703/15
703/20
mA
mA
mA
mA
Nominal input
seriesꢀ nominal
input voltage
Storage temperature range:
Storage humidity range:
Lead temperature:
Vibration:
-55°C~+125°C
687/10
95% MAX
48VDC
300°C MAX, 1.5mm from case for 10 sec
10-150Hz, 5G, 0.75mm. along X, Y and Z
Aluminium alloy
• 3.3V output
• 5V output
• 12V output
• 15V output
• 24V output
313/15
348/15
344/3
344/3
344/4
320/30
356/30
352/11
352/11
352/11
mA
mA
mA
mA
mA
Case material:
MTBF (MIL-HDBK-217F @25°C):
Weight:
1,000,000 hours
Reflected ripple
current
Nominal input
series
30
mA
15g / 35g (wiring) / 55g (rail)
with heatsink: 20g / 40g (wiring) /
60g (rail)
Surge voltage
(1sec. max)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
100
VDC
VDC
Starting voltage*
• 24VDC input
• 48VDC input
9
18
VDC
VDC
Output specifications
Input under-volta-
ge protection
• 24VDC input
• 48VDC input
5.5
12
6.5
VDC
VDC
Item
Test condition
Min
Typ
1
Max
3
Units
%
15.5
Voltage accuracy
Line regulation
Load regulation
Starting time*
Input filter
Hot plug
10
ms
Full load , Vmin-Vmax
5% load to full load
0.2
0.5
300
0.5
1
%
Pi Type
%
Unavailable
Transient recovery 25% load step change
time
500
µs
Switching frequen-
cy (PWM mode)
• 3.3V/5V output
• others
300
270
KHz
Transient respon-
se deviation
25% load step change
• 3.3V/5V output
• Others
Ctrl
• Module switch on Ctrl suspended or connected to TTL
high level (3.5-12VDC)
3
3
7
5
%
%
(The voltage of Ctrl • Module switch off Ctrl pin connected to GND or low
pin is relative to
input pin GND)
Temperature drift
Ripple and noise*
Trim
Full load
0.03 %/°C
level (0-1.2VDC)
2
• Input current
when switched off
7
mA
20MHz Bandwidth
Input voltage range
Input voltage range
50
100
mVp-p
%Vo
90
110
* Nominal input voltage & constant resistance load
Over voltage
protection
110
160
%Vo
Over current
protection
Input voltage range
110
150
190
%Io
Isolation specifications
Item
Test condition
Input/output
Min
Typ
Max
Units
VDC
VDC
MΩ
* 0%-5% load ripple&noise is no more than 5%Vo.
Ripple and noise are measured by “parallel cable” method.
Isolation voltage*
Isolation voltage*
Isolation resistance
Isolation capacitance
1500
1000
1000
Input/output case
Test at 500VDC
Example:
15DMWE4_2415S1.5
2000
pF
15 = 15Watt; D = DIP; M = series; W4 = wide input (4:1); E = cost
* with the test time of 1 minute and the leak current lower than 1mA
effective; 9-36Vin; 15Vout; S = single output; 1.5 = 1500VDC isolation
Page 1 of 7
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 – Rev. 2020-1.2
Specifications subject to change without notice.
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
EMC specifications
EMI
CE
CISPR32/EN55032
CISPR32/EN55032
CLASS A (without external components)/
CLASS B (see EMC solution recommended circuit, ②)
EMI
RE
CLASS A (without external components)/
CLASS B (see EMC solution recommended circuit, ②)
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact 6KV, Air 8KV
perf. Criteria B
perf. Criteria A
perf. Criteria A
perf. Criteria B
perf. Criteria A
10V/m
EFT
Surge
CS
2KV (see EMC solution recommended circuit, ①)
line to line 2KV (see EMC solution recommended circuit, ①)
3 Vr.m.s
Part Number
Input Voltage [VDC]
Output Voltage [VDC]
Output Current [mA]
Efficiency [%, Typ.]***
Capacitive load [µF, Max.]
Nominal
Range*
Max**
40
Full load
4000
3000
1250
15DMWE4_2403S1.5
15DMWE4_2405S1.5
15DMWE4_2412S1.5
15DMWE4_2415S1.5
15DMWE4_2424S1.5
15DMWE4_4803S1.5
15DMWE4_4805S1.5
15DMWE4_4812S1.5
15DMWE4_4815S1.5
15DMWE4_4824S1.5
24
9-36
3.3
5
88
90
90
91
4700
4700
1000
820
24
9-36
40
24
9-36
40
12
15
24
3.3
5
24
9-36
40
1000
625
24
9-36
40
91
270
48
18-75
18-75
18-75
18-75
18-75
80
4000
3000
1250
88
90
91
4700
4700
1000
820
48
80
48
80
12
15
24
48
80
1000
625
91
48
80
91
270
Add suffix H for heatsink, f.ex. 15DMWE4_1203S1.5H, suffix CM for chassis mounting, f.ex. 15DMWE4_1203S1.5CM, or suffix RM for rail mounting, f.ex. 15DMWE4_1203S1.5RM.
If the application has a higher requirement for heat dissipation, you can choose modules with heat sink.
*
The minimum input voltage and starting voltage of wring or rail models are 1VDC higher than those of DIP package due to input reverse polarity protection function.
** Absolute maximum rating without damage on the converter, but it isn‘t recommended.
*** Efficiency is measured in nominal input voltage and rated output load; for wiring and rail mounting models, due to input reverse polarity protection, a minimum
efficiency greater than Min.-2 is qualified.
Typical characteristics
Nominal input voltage, 12V, 15V, 24V output
Nominal input voltage, 3.3V, 5V output
Page 2 of 7
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
Efficiency
15DMWE4_2405S1.5
15DMWE4_2415S1.5
15DMWE4_2405S1.5
15DMWE4_2415S1.5
15DMWE4_4805S1.5
15DMWE4_4812S1.5
15DMWE4_4805S1.5
15DMWE4_4812S1.5
Typical application
All the DC/DC converters of this series are tested according to the recommended
circuit before delivery.
If it is required to further reduce input and output ripple, properly increase the
input & output of additional capacitors Cin and Cout or select capacitors of low
equivalent impedance provided that the capacitance is no larger than the max.
capacitive load of the product.
EMC solution-recommended circuit
Refer to the Cout in typical application
Page 3 of 7
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
Application of trim and calculation of trim resistance
It is not allowed to connect modules output in parallel to enlarge the power.
Mechanical dimensions and footprint
Page 4 of 7
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
Mechanical dimensions with heatsink
Wiring mounting
Page 5 of 7
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
Wiring mounting with heatsink
Rail mounting
Page 6 of 7
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DMWE4_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
1“ x 1“ DC-DC Converter
Rail mounting with heatsink
Note:
1. The maximum capacitive loads offered were tested at input voltage range and
full load.
2. Only typical model listed. Non-standard models will be different from the abo-
ve, please contact us for more details.
3. All specifications are measured at TA=25°C, humidity<75%, nominal input
voltage and rated output load unless otherwise specified.
4. In this datasheet, all the test methods of indications are based on corporate
standards.
5. We can provide product customization service, please contact our technicians
directly for specific information.
6. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 7 of 7
15DMWE4_1.5 – Rev. 2019-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明