2.4S7SIC_12153.5D6UP [GAPTEC]
2.4W - Dual Output - Wide Input - Isolated & Unregulated SIC dedicated DC-DC converter;型号: | 2.4S7SIC_12153.5D6UP |
厂家: | GAPTEC |
描述: | 2.4W - Dual Output - Wide Input - Isolated & Unregulated SIC dedicated DC-DC converter |
文件: | 总3页 (文件大小:1444K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.4S7SIC_242004D6UP Series
2.4W - Dual Output - Wide Input - Isolated & Unregulated
SIC dedicated DC-DC converter
DC-DC Converter
2.4 Watt
The 2.4S7SIC_242004D6UP is a DC-DC module power supplie designed for IGBT
drivers requiring two set of isolation power supply. The mode of mutual connec-
tion after two independent outputs is adopted internally for better energy provi-
sion of SiC turn-on and turn-off. Output short circuit protection and self-recovery
capabilities are also provided. General application includes:
Efficiency up to 80%
Temperature range:
RoHS Compliance
Ultra low isolation
capacitance
IGBT dedicated regulated
DC-DC converter
-40°C~+105°C
Dual Output Voltage
Isolation voltage: 3.5kVAC/6kVDC
Short circuit protection (SCP)
• Universal inverter
• AC servo drive system
• Electric welding machine
• Uninterruptible power supply (UPS)
Common specifications
Short circuit protection:
Temperature rise at full load:
Output specifications
Continuous, automatic recovery
Item
Test condition
Min
19.6
Typ
20
Max
20.4
Units
VDC
30°C TYP (Ta=25°C)
Derating at ≥85°C (see graph)
Output voltage
+Vo: Vin= 12VDC, Pin6 &
Pin7 +Io=+100mA
-Vo: Vin= 12VDC, Pin5 &
Pin6 -Io=-100mA
-3.7
-3.9
-4.1
VDC
Cooling:
Free air convection
-40°C – +105°C
Operation temperature range:
Storage temperature range:
Lead temperature
Output voltage
accuracy
See tolerance envelope
graph
-50°C – +105°C
Line regulation
Input voltage change:
10%
1.1
1.3
%
300°C MAX, 1.5mm from case for 10 sec
< 95%
Storage humidity range:
Case material:
Load regulation
10% to 100% load
• 20VDC output
• -4VDC output
Black flame-retardant and
heat-resistant plastic [UL94-V0]
8
13
%
%
MTBF:
>3,500,000 hours
4.3g
Ripple & Noise*
20MHz Bandwidth
• Ripple
• Noise
60
75
mVp-p
mVp-p
Weight:
Dimensions:
19.50*9.80*12.50mm
Temperature drift 100% load
coefficient
0.03 %/°C
Switching
frequency
Full load, nominal input
100
KHz
EMC specifications
EMI
EMI
EMS
CE
CISPR22/EN55022
CLASS B (see EMC recommended circuit)
*Test ripple and noise by “parallel cable” method. See detailed operation instruc-
tions at DC-DC application notes.
RE
CISPR22/EN55022
CLASS B (see EMC recommended circuit)
ESD
IEC/EN61000-4-2
perf. Criteria B
Contact 6KV
Isolation specifications
Item
Test condition
Min
Typ
3.5
Max
Units
VAC
Input specifications
Isolation voltage
Input-Output, tested
for 1 minute and
leakage current less
than 1mA
3500
Item
Test condition
Min
Typ
Max
18
Units
VDC
Input surge
voltage
--0.7
6000
1000
Isolation resistance
Input-Output, test at
500VDC
MΩ
pF
Hot plug
Unavailable
Capacitor
Input filter
Isolation capacitance Input/Output,
100KHz/0.1V
Example:
2.4S7SIC_242004D6UP
2.4 = Watt; S7 = SIP7; SIC = SiC Series; 24 = 24Vin; 20 = +20Vout;
04 = -4Vout; D = Dual Output; 6 = 6kVDC; U = Unregulated;
P = Short Circuit Protection (SCP)
Part Number
Input Voltage
(Range) [V]
Input current, no load
[mA, typ]
Output Voltage
[VDC, +Vo/-Vo]
Output current
[mA, +Vo/-Vo]
Max. capacitive
load [µF]
Efficiency
[%, typ]
2.4S7SIC_242004D6UP
24 (21.6-26.4)
20
+20/-4
+100/-100
220
75/80
Page 1 of 3
2.4S7SIC_242004D6UP – Rev. 2018-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2.4S7SIC_242004D6UP Series
2.4W - Dual Output - Wide Input - Isolated & Unregulated
SIC dedicated DC-DC converter
Temperature Derating Curve
Efficiency
Overload protection
In normal operating conditions, the circuit of these products have no overload protection.
Protect with a breaker is a simple way to make overload protection.
Test configurations
Page 2 of 3
2.4S7SIC_242004D6UP – Rev. 2018-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2.4S7SIC_242004D6UP Series
2.4W - Dual Output - Wide Input - Isolated & Unregulated
SIC dedicated DC-DC converter
EMC solution-recommended circuit
The product does not support output in parallel with power per liter or hot-swappable use.
It is not allowed to connect modules output in parallel to enlarge the power.
Mechanical dimensions
Note:
1. The lead connecting the power supply module and IGBT driver should be as
short as possible during use;
2. The output filtering capacitor should be as close as possible to the power supply
module and SIC driver;
3. The peak of the MOSFET SIC driver gate drive current is high, so low internal re-
sistance electrolytic capacitor is recommended to be used for the power supply
module output filter capacitor;
4. The average output power of the driver must be lower than that of the power
supply module;
5. Consider fixing with glue near the module if being used in vibration occasion;
6. The max. capacitive load should be tested within the input voltage range and
under full load conditions;
7. Unless otherwise noted, all specifications are measured at Ta = 25°C, humidity
<75%, nominal input voltage and rated output load.
8. In this datasheet, all test methods are based on our corporate standards.
9. All characteristics are for listed models, and non-standard models may perform
differently. Please contact our technical support for more detail.
10. Please contact our technical support for any specific requirement.
11. Specifications of this product are subject to changes without prior notice.
Page 3 of 3
2.4S7SIC_242004D6UP – Rev. 2018-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
2.4S7SIC_122004D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated SIC dedicated DC-DC converter
GAPTEC
2.4S7SIC_151505D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated DC-DC module power supply specialized for SiC driver
GAPTEC
2.4S7SIC_152004D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated DC-DC module power supply specialized for SiC driver
GAPTEC
2.4S7SIC_242004D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated SIC dedicated DC-DC converter
GAPTEC
2.5-VLVTTL
This chapterdescribes the electric characteristics, switching characteristics,and I/O timing for Cyclone III devices. A glossary is also included for your reference
ALTERA
©2020 ICPDF网 联系我们和版权申明