30DAWE_2403S1.5 [GAPTEC]
30W - Single/Dual Output - Wide Input - Isolated & Regulated;型号: | 30DAWE_2403S1.5 |
厂家: | GAPTEC |
描述: | 30W - Single/Dual Output - Wide Input - Isolated & Regulated |
文件: | 总4页 (文件大小:1907K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
30DAWE_1.5 series
30W - Single/Dual Output - Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
30 Watt
Efficiency up to 90%
Operating temperature
range: -40°C ~ +80°C
The 30DAWE_1.5 series are isolated 30W DC-DC products with a wide 2:1
input voltage and feature efficiencies of up to 90%, input to output
isolation is tested with 1500VDC and the converters safely operate
ambient temperature of -40°C to +80°C, output short-circuit, over-
voltage, over-current protection. They meet CLASS A of CISPR32/EN55032
EMI standards without external components.
2:1 wide input voltage range
Output over current, over
voltage protection
Six-sided metal shield
Industry standard pinout
Meet CISPR32/EN55032 CLASS A,
without extra components
EN/UL60950 approved
Short circuit protection (SCP)
1.5kVDC isolation
No-load power consumption
as low as 0.14W
They are widely used in applications such as data transmission device,
battery power supply device, tele-comunication device, distributed power
supply system, hybrid module system, remote control system, industrial
robot fields.
UL-60950-1 (E347551)
Common specifications
Short circuit protection:
Cooling:
Output specifications
Hiccup, continous, self-recovery
Free air convection
-40°C~+80°C
Item
Test condition
Min
Typ
Max
Units
Output voltage
accuracy
5%-100% load
0%-5% load
1
1
3
5
%
%
Operation temperature range:
Storage temperature range:
Pin soldering resistance temperature:
Vibration:
Line regulation
Full load, input
voltage low to high
0.2
0.5
%
-55°C~+125°C
300°C MAX, 1.5mm from case for 10 sec
10-55Hz, 2G, 30 Min. along X, Y and Z
5-95%RH
Load regulation (1) 5%-100% load
0.5
1
%
Transient recovery 25% load step change
time
300
500
µs
Storage humidity range:
Switching frequency (PWM mode):
Case material:
Transient respon-
se deviation
25% load step change
• 3.3/5/ 5VDC output
• others
300KHz TYP
5
3
8
5
%
%
Aluminium alloy
MTBF (MIL-HDBK-217F@25°C):
Weight:
1000 K hours MIN
Temperature drift
Ripple & Noise(3)
Trim
100% full load
0.03 %/°C
27.8g
20MHz Bandwidth
50
10
100
mVp-p
%Vo
Input voltage range
(24V/48V input series)
Dimensions:
50.80 × 25.40 × 11.80 mm
① Switching frequency is measured at full load. The module reduces the switching
frequency for light load (below 50%) efficiency improvement.
Over voltage
protection
Input voltage range
(all models; except
30DAWE_12110S1.5)
110
110
160
190
%Vo
%Io
Over current
protection
Input voltage range
Input specifications
Item
Test condition
Min
Typ
40
Max
Units
mA
① Load regulation for 0%-100% load is 5%;
② The “parallel cable” method is used for Ripple and Noise test.
Reflected ripple
current
Surge voltage
(1 sec. max)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
VDC
VDC
Isolation specifications
100
Item
Test condition
Min
Typ
Max Units
VDC
Start-up voltage
• 24VDC input
• 48VDC input
18
36
VDC
VDC
Isolation voltage
Tested for 1 minute and 1500
leakage current less
than 1 mA
Start-up time
Nominal input & cons-
tant resistance load
10
ms
Isolation resistance
Test at 500VDC
100KHz/0.1V
1000
MΩ
pF
Input filter
Hot plug
Ctrl(1)
Pi
Isolation
capacitance
2000
Unavailable
• Module on
Ctrl pin open or pulled high
(3.5-12VDC)
Ctrl pin pulled low to GND
(0-1.2VDC)
Note:
• Module off
1. The maximum capacitive load offered were tested at input voltage range and
full load;
• Input current when off
5
8
mA
2. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and
rated output load;
① The Ctrl pin voltage is referenced to input GND.
3. All index testing methods in this datasheet are based on company corporate
standards;
4. We can provide product customization service, please contact our technicians
directly for specific information;
5. Products are related to laws and regulations: see „Features“ and „EMC“;
6. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Example:
30DAWE_2415S1.5
30 = 30Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin;
E = cost effective; 15Vout; S = single output; 1.5 = 1500VDC isolation
Page 1 of 4
30DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
30DAWE_1.5 series
30W - Single/Dual Output - Wide Input - Isolated & Regulated
DC-DC Converter
EMC specifications
EMI
CE
CISPR32/EN550232
CISPR32/EN55032
CLASS A (without external components)
CLASS B (see EMC compliance circuit ②)
EMI
RE
CLASS A (without external components)
CLASS B (see EMC compliance circuit ②)
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
Contact 4KV
10V/m
perf. Criteria B
perf. Criteria A
EFT
2KV
(see EMC compliance circuit ①)
perf. Criteria B
EMS
EMS
Surge
CS
IEC/EN61000-4-5
IEC/EN61000-4-6
line to line 2KV
(see EMC compliance circuit ①)
perf. Criteria B
perf. Criteria A
3 Vr.m.s
Part Number
Input Voltage [VDC]
Range
Max(1)
Output Voltage
[VDC]
Output Current
Input Current [mA, typ/max]
Efficiency(2)
[%, Typ.]
Capacitive load
[µF, Max]
Nominal
24
[mA, Max]
6000
6000
3333
Full load
1471/1507
1421/1453
1389/1489
1389/1489
1389/1489
1389/1489
727/745
No load
60/100
60/100
6/12
30DAWE_2403S1.5
30DAWE_2405S1.5
30DAWE_2409S1.5
30DAWE_2412S1.5
30DAWE_2415S1.5
30DAWE_2424S1.5
30DAWE_4803S1.5
30DAWE_4805S1.5
30DAWE_4812S1.5
30DAWE_4815S1.5
30DAWE_4824S1.5
18-36
40
40
40
40
40
40
80
80
80
80
80
3.3
5
85
88
86
88
90
90
86
88
88
89
89
10000
10000
4700
2700
1680
24
18-36
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
36-75
24
9
24
12
15
24
3.3
5
2500
6/12
24
2000
1250
6/12
24
6/12
680
48
6000
6000
2500
20/30
20/35
5/10
10000
10000
2700
1680
48
711/727
48
12
15
24
711/727
48
2000
1250
711/727
5/10
48
711/727
5/10
680
① Exceeding the maximum input voltage may cause permanent damage;
② Efficiency is measured In nominal input voltage and rated output load.
Typical characteristics
3VDC/5VDC output
9VDC/12VDC/15VDC/24VDC output
Page 2 of 4
30DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
30DAWE_1.5 series
30W - Single/Dual Output - Wide Input - Isolated & Regulated
DC-DC Converter
Efficiency
30DAWE_2405S1.5
30DAWE_2405S1.5
Typical application
All the DC/DC converters of this series are tested before delivery using
the recommended circuit shown in Fig. 1.
Input and/or output ripple can be further reduced by appropriately
increasing the input & output capacitor values Cin and Cout and/or by
selecting capacitors with a low ESR (equivalent series resistance). Also
make sure that the capacitance is not exceeding the specified max.
capacitive load value of the product.
Figure 1
EMC recommended circuit
Refer to Cout in figure 1
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
30DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
30DAWE_1.5 series
30W - Single/Dual Output - Wide Input - Isolated & Regulated
DC-DC Converter
Trim
Trim Function for Output Voltage Adjustment (open if unused)
Mechanical dimensions
Page 4 of 4
30DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明