30DAWE_4824S1.5 [GAPTEC]

30W - Single/Dual Output - Wide Input - Isolated & Regulated;


型号：	30DAWE_4824S1.5
厂家：	GAPTEC
描述：	30W - Single/Dual Output - Wide Input - Isolated & Regulated
文件：	总4页 (文件大小：1907K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

30DAWE_1.5 series

30W - Single/Dual Output - Wide Input - Isolated & Regulated

DC-DC Converter

30 Watt

Eﬃciency up to 90%

Operating temperature

range: -40°C ~ +80°C

The 30DAWE_1.5 series are isolated 30W DC-DC products with a wide 2:1

input voltage and feature eﬃciencies of up to 90%, input to output

isolation is tested with 1500VDC and the converters safely operate

ambient temperature of -40°C to +80°C, output short-circuit, over-

voltage, over-current protection. They meet CLASS A of CISPR32/EN55032

EMI standards without external components.

2:1 wide input voltage range

Output over current, over

voltage protection

Six-sided metal shield

Industry standard pinout

Meet CISPR32/EN55032 CLASS A,

without extra components

EN/UL60950 approved

Short circuit protection (SCP)

1.5kVDC isolation

No-load power consumption

as low as 0.14W

They are widely used in applications such as data transmission device,

battery power supply device, tele-comunication device, distributed power

supply system, hybrid module system, remote control system, industrial

robot ﬁelds.

UL-60950-1 (E347551)

Common speciﬁcations

Short circuit protection:

Cooling:

Output speciﬁcations

Hiccup, continous, self-recovery

Free air convection

-40°C~+80°C

Item

Test condition

Min

Typ

Max

Units

Output voltage

accuracy

5%-100% load

0%-5% load

Operation temperature range:

Storage temperature range:

Pin soldering resistance temperature:

Vibration:

Line regulation

Full load, input

voltage low to high

0.2

0.5

-55°C~+125°C

300°C MAX, 1.5mm from case for 10 sec

10-55Hz, 2G, 30 Min. along X, Y and Z

5-95%RH

Load regulation ⁽¹⁾5%-100% load

0.5

Transient recovery 25% load step change

time

300

500

µs

Storage humidity range:

Switching frequency (PWM mode):

Case material:

Transient respon-

se deviation

25% load step change

• 3.3/5/ 5VDC output

• others

300KHz TYP

Aluminium alloy

MTBF (MIL-HDBK-217F@25°C):

Weight:

1000 K hours MIN

Temperature drift

Ripple & Noise⁽³⁾

Trim

100% full load

0.03 %/°C

27.8g

20MHz Bandwidth

100

mVp-p

%Vo

Input voltage range

(24V/48V input series)

Dimensions:

50.80 × 25.40 × 11.80 mm

① Switching frequency is measured at full load. The module reduces the switching

frequency for light load (below 50%) eﬃciency improvement.

Over voltage

protection

Input voltage range

(all models; except

30DAWE_12110S1.5)

110

160

190

%Vo

%Io

Over current

protection

Input voltage range

Input speciﬁcations

Item

Test condition

Min

Typ

Max

Units

① Load regulation for 0%-100% load is 5%;

② The “parallel cable” method is used for Ripple and Noise test.

Reﬂected ripple

current

Surge voltage

(1 sec. max)

• 24VDC input

• 48VDC input

-0.7

VDC

Isolation speciﬁcations

100

Item

Test condition

Min

Typ

Max Units

VDC

Start-up voltage

• 24VDC input

• 48VDC input

VDC

Isolation voltage

Tested for 1 minute and 1500

leakage current less

than 1 mA

Start-up time

Nominal input & cons-

tant resistance load

Isolation resistance

Test at 500VDC

100KHz/0.1V

1000

MΩ

Input ﬁlter

Hot plug

Ctrl⁽¹⁾

Isolation

capacitance

2000

Unavailable

• Module on

Ctrl pin open or pulled high

(3.5-12VDC)

Ctrl pin pulled low to GND

(0-1.2VDC)

Note:

• Module oﬀ

1. The maximum capacitive load oﬀered were tested at input voltage range and

full load;

• Input current when oﬀ

2. Unless otherwise speciﬁed, parameters in this datasheet were measured under

the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and

rated output load;

① The Ctrl pin voltage is referenced to input GND.

3. All index testing methods in this datasheet are based on company corporate

standards;

4. We can provide product customization service, please contact our technicians

directly for speciﬁc information;

5. Products are related to laws and regulations: see „Features“ and „EMC“;

6. Our products shall be classiﬁed according to ISO14001 and related environmen-

tal laws and regulations, and shall be handled by qualiﬁed units.

Example:

30DAWE_2415S1.5

30 = 30Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin;

E = cost eﬀective; 15Vout; S = single output; 1.5 = 1500VDC isolation

Page 1 of 4

30DAWE_1.5 – Rev. 2020-1.1

Speciﬁcations subject to change without notice.

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

30DAWE_1.5 series

30W - Single/Dual Output - Wide Input - Isolated & Regulated

DC-DC Converter

EMC speciﬁcations

EMI

CISPR32/EN550232

CISPR32/EN55032

CLASS A (without external components)

CLASS B (see EMC compliance circuit ②)

EMI

CLASS A (without external components)

CLASS B (see EMC compliance circuit ②)

EMS

ESD

IEC/EN61000-4-2

IEC/EN61000-4-3

IEC/EN61000-4-4

Contact 4KV

10V/m

perf. Criteria B

perf. Criteria A

EFT

2KV

(see EMC compliance circuit ①)

perf. Criteria B

EMS

Surge

IEC/EN61000-4-5

IEC/EN61000-4-6

line to line 2KV

(see EMC compliance circuit ①)

perf. Criteria B

perf. Criteria A

3 Vr.m.s

Part Number

Input Voltage [VDC]

Range

Max⁽¹⁾

Output Voltage

[VDC]

Output Current

Input Current [mA, typ/max]

Eﬃciency⁽²⁾

[%, Typ.]

Capacitive load

[µF, Max]

Nominal

[mA, Max]

6000

3333

Full load

1471/1507

1421/1453

1389/1489

727/745

No load

60/100

6/12

30DAWE_2403S1.5

30DAWE_2405S1.5

30DAWE_2409S1.5

30DAWE_2412S1.5

30DAWE_2415S1.5

30DAWE_2424S1.5

30DAWE_4803S1.5

30DAWE_4805S1.5

30DAWE_4812S1.5

30DAWE_4815S1.5

30DAWE_4824S1.5

18-36

3.3

10000

4700

2700

1680

18-36

36-75

3.3

2500

6/12

2000

1250

6/12

680

6000

2500

20/30

20/35

5/10

10000

2700

1680

711/727

2000

1250

711/727

5/10

711/727

5/10

680

① Exceeding the maximum input voltage may cause permanent damage;

② Eﬃciency is measured In nominal input voltage and rated output load.

Typical characteristics

3VDC/5VDC output

9VDC/12VDC/15VDC/24VDC output

Page 2 of 4

30DAWE_1.5 – Rev. 2020-1.1

Speciﬁcations subject to change without notice.

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

30DAWE_1.5 series

30W - Single/Dual Output - Wide Input - Isolated & Regulated

DC-DC Converter

Eﬃciency

30DAWE_2405S1.5

Typical application

All the DC/DC converters of this series are tested before delivery using

the recommended circuit shown in Fig. 1.

Input and/or output ripple can be further reduced by appropriately

increasing the input & output capacitor values Cin and Cout and/or by

selecting capacitors with a low ESR (equivalent series resistance). Also

make sure that the capacitance is not exceeding the speciﬁed max.

capacitive load value of the product.

Figure 1

EMC recommended circuit

Refer to Cout in ﬁgure 1

Page 3 of 4

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

30DAWE_1.5 – Rev. 2020-1.1

Speciﬁcations subject to change without notice.

30DAWE_1.5 series

30W - Single/Dual Output - Wide Input - Isolated & Regulated

DC-DC Converter

Trim

Trim Function for Output Voltage Adjustment (open if unused)

Mechanical dimensions

Page 4 of 4

30DAWE_1.5 – Rev. 2020-1.1

Speciﬁcations subject to change without notice.

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

相关型号：