3D8W4_2412D1.6RP [GAPTEC]
3Watt - 4:1 Regulated Single & Dual output;型号: | 3D8W4_2412D1.6RP |
厂家: | GAPTEC |
描述: | 3Watt - 4:1 Regulated Single & Dual output |
文件: | 总4页 (文件大小:545K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3D8W4_1.6RP series
3Watt - 4:1 Regulated Single & Dual output
DC-DC Converter
3 Watt
The 3D8W4_1.6RP series is a family of cost effective and high performanced
3W single & dual output DC-DC converters. These converters are built in non-
conductive black plastic package in a 8-pin DIL miniature compact case with high
performance features wide range devices operate over 4:1 input voltage range
providing stable output voltage. Devices are encapsulated using flame retardant
resin. Input voltages of 12, 24, 48 Vdc with output voltage of 3.3, 5, 12, 15, 5, 12,
15 Vdc. High performance features include high efficiency operation up to 84%
and output voltage accuracy of 1% maꢀimum.
Wide input range (4:1)
Highest Power Density in
8 Pin DIL Package
Short circuit protection (SCP)
Operating temperature
range: -40°C ~ +80°C
Remote on/off Control
Under Voltage Lock-Out
Circuit
1.6kVDC isolation
Efficiency up to 84%
Full SMD Technology
Output specifications
Voltage accuracy
1%
Maꢀimun Output Current
See table
No load output voltage accuracy
%
Common specifications
Efficiency
Line regulation
0.2%,maꢀ.
See table,typ.
Load regulation
(From 0% to 100% Load) 1.0%,maꢀ.
5%
Short circuit protection:
Cooling:
Indefinite
Cross Regulation (Dual Output)(1)
Nature Convection
-40°C~+80°C
Ripple & Noise (20 MHz bandwidth)(2) Single 150mVpp,maꢀ.
Dual 100mVpp,maꢀ.
Operation temperature range:
Storage temperature:
Storage humidity range:
-55°C~+125°C
Temperature Coefficient
Capacitive Load(3)
0.02%/°C
< 95% reIH
See table
500us, typ.
3%, maꢀ.
Pin soldering resistance tem-
perature:
300°C MAX, 1.5mm away from case for 10s.
Transient Recovery Time (4)
Transient response deviation(4)
Case material:
Non conductive black plastic
(UL94V-0 rated)
Single Output 3.3V, 5V: 5%, maꢀ.
MTBF (MIL-HDBK-217F@25°C):
Weight:
>820,000 hours
3.6g
EMC specifications
Switing Frqeunchecy
100kHz,min.
CE(8)
RE
EN55032
CLASSA
EN55032
CLASSA
Input specifications
ESD
IEC61000-4-2
IEC61000-4-3
IEC61000-4.4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
Voltage Range
See table
RS
Start up Time (Nominal Vin and constant resis-
tive load)
30mS, typ.
EFT(9)
Surge(9)
CS
Input Current
See table
See table
Capacitor
20mA pk-pk
No-Load Input Current
Input Filter
PFMF
Input Reflected Ripple Current(5)
Example:
3D8W4_1205S1.6RP
3 = 3Watt; D8 = DIP8; W4 = Wide input (4:1); 12 = 12Vin; 05 = 5Vout;
S = Single output; 1.6= 1.6kVDC; R= Regulated output; P= Short circuit
protection
Remote on/off
ON:
OFF:
open or high impedance
2-4mA input current (via 1K)
2.5mA, maꢀ.
Off stand by input current (Nominal Vin)
Under Voltage Lockout
12V Modes Module ON / OFF
24V Modes Module ON / OFF
48V Modes Module ON / OFF
4.2Vdc / 3.5Vdc, typ.
8.5Vdc / 7.0Vdc, typ.
17.5Vdc / 15.5Vdc, typ.
Note:
1. One load is 25% to 100% load, the other load is 100% load, the output voltage
variable rate is within 5%.
2. Ripple/Noise measured with a 10μF electrolytic capacitor and 0.1μF ceramic
capacitor.
3. Test by minimal Vin and constant resistive load.
Isolation specifications
4. Test by normal Vin and 100%-25% load,25% Ioad step change.
5. Measured Input reflected ripple current with a simulated source inductance of
27μH and a source capacitor Cin (47μF, ESR<1.0Ω .
Isolation voltage
1600VDC
Isolation resistance
Isolation capacitance
500VDC 1000 MΩ
1000M Ohm,min.
6. “Nature Convection“ is usually about 30-65 LFM but is not equal to still
air (0 LFM).
7. Eꢀceeding the absolute ratings of the unit could cause damage. It‘s not allowed
for continuous operating ratings.
8. Input filter components are required to help meet conducted emission class A,
Which application refer to the EMI Filter(Conduct ).
9. An eꢀternal filter capacitor is required if the module has to meet IEC61000-4-4
and IEC61000-4-5. The filter capacitor Motien suggest: Nippon - chemi - con KY
series, 220μF/100V.
Page 1 of 4
3D8W4_1.6RP – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3D8W4_1.6RP series
3Watt - 4:1 Regulated Single & Dual output
Part Number
Input Voltage Range
[V]
Input current
[mA, max/min]
Output Voltage
[VDC]
Output current
[mA, max/min]
Efficiency
[%; min/typ]
Capacitive load
[µF]
3D8W4_1203S1.6RP
3D8W4_1205S1.6RP
3D8W4_1212S1.6RP
3D8W4_1215S1.6RP
3D8W4_1205D1.6RP
3D8W4_1212D1.6RP
3D8W4_1215D1.6RP
3D8W4_243R3S1.6RP
3D8W4_2405S1.6RP
3D8W4_2412S1.6RP
3D8W4_2415S1.6RP
3D8W4_2405D1.6RP
12 ( 4.5-18 )
12 ( 4.5-18 )
12 ( 4.5-18 )
12 ( 4.5-18 )
12 ( 4.5-18 )
12 ( 4.5-18 )
12 ( 4.5-18 )
24 ( 9-36 )
24 ( 9-36 )
24 ( 9-36 )
24 ( 9-36 )
24 ( 9-36 )
257/30
309/45
301/55
301/60
313/30
305/55
301/60
127/25
152/20
149/30
149/35
154/25
3.3
5
700/0
600/0
250/0
200/0
300/0
125/0
75
81
3300
1680
470
12
15
5
83
83
80
82
83
76
82
84
84
81
330
1000
220
12
15
3.3
5
100/0
700/0
600/0
250/0
200/0
300/0
220
3300
1680
470
12
15
5
330
1000
3D8W4_2412D1.6RP
3D8W4_2415D1.6RP
3D8W4_483R3S1.6RP
3D8W4_4805S1.6RP
3D8W4_4812S1.6RP
24 ( 9-36 )
24 ( 9-36 )
48 ( 18-75 )
48 ( 18-75 )
48 ( 18-75 )
151/30
149/35
65/10
77/10
77/15
12
15
125/0
100/0
700/0
600/0
250/0
83
84
74
81
220
220
3.3
5
3300
1680
470
12
81
3D8W4_4812S1.6RP
48 ( 18-75 )
77/15
12
250/0
81
470
3D8W4_4815S1.6RP
3D8W4_4805D1.6RP
3D8W4_4812D1.6RP
48 ( 18-75 )
48 ( 18-75 )
48 ( 18-75 )
76/15
79/20
78/20
15
5
200/0
300/0
125/0
82
79
80
330
1000
220
12
3D8W4_4815D1.6RP
48 ( 18-75 )
78/25
15
100/0
80
220
Typical characteristics
Temperature derating graph
Page 2 of 4
3D8W4_1.6RP – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3D8W4_1.6RP series
3Watt - 4:1 Regulated Single & Dual output
Output Ripple & Noise Measurement Test
Use a 10μF electrolytic capacitor and 0.1μF ceramic capacitor.
The Scope measurement bandwidth is 20MHz.
Input Reflected Ripple Current Test Step
Input reflected ripple current is measured through a source inductor Lin (27μH) and a source
capacitor Cin(47μF, ESR<1.0Ω at 100KHz) at nominal input and full load.
EFT/Surge Filter
Input filter components (C2) is used to help meet IEC .61000-4-4 and IEC61000-4-5
3D8W4_1.6RP
EMI Filter Conducted Emissions
Input filter components (C1,L1) are used to meet EMI test criterial A.
These components should be mounted as close as possible to the module; and all leads should be minimized to decrease
C1
L1
3D8W4_12XXXXX
3D8W4_24XXXXX
3D8W4_48XXXXX
1210,10μF,35V
1210,2.2μF,100V
1210,4.7μF,100V
2.2μH
Remote ON / OFF Test Step
Input current(2~4mA) via 1KΩ to Pin2 , converter OFF.
open or high impedance , converter ON
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3D8W4_1.6RP – Rev. 2020-1.0
Specifications subject to change without notice.
3D8W4_1.6RP series
3Watt - 4:1 Regulated Single & Dual output
Mechanical dimensions
PIN CONNECTIONS
SINGLE
PIN NUMBER
DUAL
1
-V Input
-V Input
3D8W4_1.6RP
2
Remote On/
Off
Remote On/Off
4
5
6
7
+V Input
+V Output
N.P.
+V Input
+V Output
Common
-V Output
-V Output
Page 4 of 4
3D8W4_1.6RP – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明