首页 |元器件品牌

40DDW_2412D1.5 [GAPTEC]

40W - Single/Dual Output - Wide Input - Isolated & Regulated;
40DDW_2412D1.5
型号： 40DDW_2412D1.5
厂家： GAPTEC    GAPTEC
描述：

40W - Single/Dual Output - Wide Input - Isolated & Regulated
文件： 总3页 (文件大小：622K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
40DDW_1.5 Series  
40W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
DC-DC Converter  
40 Watt  
The 40DDW_1.5 series offers 40W of output, wide input voltage of  
9-18VDC, 18-36VDC, 36-75VDC and features 1500VDC isolation,  
six-sided metal shield over current and short circuit protection.  
High efficiency up to 91%  
2:1 wide input voltage range  
Isolation voltage 1500VDC  
Six-sided metal shield  
Short circuit protection (SCP)  
(automatic recovery)  
Operating temperature:  
-40°C to +85°C  
Over temperature protection  
Industry standard pinout  
Under voltage lockout  
All models are particularly suited to tele-communications, industrial,  
test equipments power etc.  
Common specifications  
Cooling:  
Output specifications  
Free air convection  
Item  
Test condition  
Min Typ  
Max  
2
Units  
ꢀ
Short circuit protection:  
Operation temperature range:  
Storage temperature range:  
Case temperature:  
Continuous, auto-recovery  
-40°C~+85°C  
Voltage tolerance  
Full load @Vin(nom.%  
Output voltage  
adjustment  
only for single output  
models and symetric  
dual output models  
10  
ꢀ
-55°C~+125°C  
105°C  
Line regulation  
Load regulation  
Vin min to Vin max, F.L  
0.5  
ꢀ
Lead temperature range:  
Switching frequency (PWM mode%:  
Humidity:  
265°C MAX, 1.5mm from case for 10 sec  
300kHz TYP  
10ꢀ to 100ꢀ load  
• Single  
0.5  
1
ꢀ
ꢀ
• Dual (balance load%  
non-condensing, 95ꢀ MAX  
Metal  
Cross regulation  
25ꢀ / 100ꢀ (Dual  
output%  
5
ꢀ
Case material:  
Ripple and noise1%  
Start-up time  
20MHz Bandwidth  
85  
25  
100  
mV  
ms  
Potting material:  
Epoxy (UL94V-0 rated%  
>150,000 hours  
70g  
MTBF (MIL-HDBK-217F @25°C%*:  
Weight:  
nominal Vin and cons-  
tant resistive load  
Transient response 25ꢀ load step change  
setting time  
300  
µs  
* BELLCORE TR-NWT-000332. Case I: 50ꢀ Stress, Temperature at 40ºC. (Ground  
fixed and controlled environment%  
Over load  
protection  
Input voltage range  
150  
ꢀIo  
Input specifications  
Over voltage  
protection  
• 3.3VDC  
• 5VDC  
• 12VDC  
• 15VDC  
3.9  
6.2  
15  
V
V
V
V
Item  
Test condition  
Min  
Typ  
Max  
Units  
18  
Start-up voltage /  
under voltage lockout  
• 12Vin  
• 24Vin  
• 48Vin  
9/8  
17.8/15.8  
36/33  
VDC  
VDC  
VDC  
Remote ON/OFF2%  
• ON  
• OFF  
Open  
Short to -Vin  
• Off idle current  
2.5  
10  
mA  
ꢀ
Surge voltage  
100ms max.  
• 12Vin  
• 24Vin  
25  
50  
100  
V
V
V
External trim adj. range  
• 48Vin  
1% Test ripple and noise by “parallel cable” method. Typical value at nominal input  
voltage and no load.  
2% The ON/OFF control pin voltage is referenced to -Input. (Leave open if not used.%  
Conducted noise*  
Filter  
EN 55022 level A, FCC part 15,  
level A with external capacitor  
Pi type  
Model selection:  
WCTV_xxyyN##  
* The 40DDW series can meet EN55022 Class A with parallel an external  
capacitor to the input pins. Recommend:  
12Vin: 10µF/25V X7R 1812 MLCC  
W= Watt; C=Case; T= Type; V= Voltage Variation (omitted 10ꢀ%;  
xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC%  
24Vin: 4.7µF/50V X7R 1812 MLCC.  
48Vin: 2.2µF/100V X7R 1812 MLCC.  
Example:  
40DDW_2415S1.5  
40= 40Watt; D= DIP; D= series; W= wide input (2:1) 18-36Vin;  
15Vout; S= single output; 1.5= 1500VDC  
Isolation specifications  
Item  
Test condition  
Min  
Typ  
Max  
Units  
VDC  
Note:  
1. Input voltage can’t exceed this value, or will cause the permanent damage.  
2. The load shouldn‘t be less than 5ꢀ, otherwise ripple will increase dramatically.  
3. Max. Capacitive Load is tested on Vin-nominal and full load.  
4. All specifications measured at Ta=25°C, humidity<75ꢀ, nominal input voltage  
and rated output load unless otherwise specified.  
5. In this datasheet, all the test methods of indications are based on corporate  
standards.  
6. Only typical models listed, other models may be different, please contact our  
technical person for more details.  
Isolation voltage  
Input/Output, tested  
for 1 minute and 1mA  
max  
1500  
Isolation resistance  
Isolation capacitance  
Test at 500VDC  
1000  
MΩ  
Input/Output,  
100KHz/0.1V  
2500  
pF  
7. Specifications subject to change without notice.  
Page 1 of 3  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
40DDW_1.5 – Rev. 2016-1.2  
Specifications subject to change without notice.  
40DDW_1.5 Series  
40W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Part Number  
Input Voltage Range  
[VDC]  
Input current [mA, typ]  
no load full load  
Output Voltage [VDC]  
Output Current [mA]  
Efficiency [%, Typ.]  
Capacitive load*  
[µF, max.]  
40DDW_1203S1.5  
40DDW_1205S1.5  
40DDW_1212S1.5  
40DDW_1215S1.5  
40DDW_2403S1.5  
40DDW_2405S1.5  
40DDW_2412S1.5  
40DDW_2415S1.5  
40DDW_4803S1.5  
40DDW_4805S1.5  
40DDW_4812S1.5  
40DDW_4815S1.5  
40DDW_1212D1.5  
40DDW_1215D1.5  
40DDW_2412D1.5  
40DDW_2415D1.5  
40DDW_4812D1.5  
40DDW_4815D1.5  
9-18  
9-18  
120  
130  
50  
50  
70  
80  
30  
30  
40  
50  
30  
30  
60  
60  
30  
30  
30  
30  
3125  
3703  
3750  
3721  
1544  
1831  
1833  
1840  
763  
3.3  
5
10000  
8000  
3300  
2650  
10000  
8000  
3300  
2650  
10000  
8000  
3300  
2650  
1670  
1340  
1670  
1340  
1670  
1340  
88  
90  
88  
89  
89  
91  
90  
90  
90  
91  
90  
90  
89  
89  
90  
90  
90  
90  
16000  
10000  
2000  
1200  
16000  
10000  
2000  
1200  
16000  
10000  
2000  
1200  
1000  
680  
9-18  
12  
15  
3.3  
5
9-18  
18-36  
18-36  
18-36  
18-36  
36-75  
36-75  
36-75  
36-75  
9-18  
12  
15  
3.3  
5
915  
916  
12  
15  
12  
15  
12  
15  
12  
15  
920  
3752  
3764  
1855  
1861  
927  
9-18  
18-36  
18-36  
36-75  
36-75  
1000  
680  
1000  
680  
930  
* Test by normal Vin and constant resistive load.  
Typical characteristics  
Output voltage adjustment  
Page 2 of 3  
40DDW_1.5 – Rev. 2016-1.2  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
40DDW_1.5 Series  
40W - Single/Dual Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
EMC considerations  
Suggested Schematic to comply with Conducted Noise according to EN55022 Class A  
Recommended Layout with input Filter  
Following components are needed to comply with EN55022 Class A conducted noise:  
40DDW_12xx  
Component  
C1, C2  
Value  
10µF  
Voltage  
25V  
Reference  
1812 MLCC  
1206 MLCC  
C3, C4  
1000pF  
2KV  
40DDW_24xx  
Component  
C1, C2  
Value  
4.7µF  
Voltage  
50V  
Reference  
1812 MLCC  
1206 MLCC  
C3, C4  
1000pF  
2KV  
40DDW_48xx  
Component  
C1, C2  
Value  
2.2µF  
Voltage  
100V  
2KV  
Reference  
1812 MLCC  
1206 MLCC  
C3, C4  
1000pF  
Mechanical dimensions  
Note:  
Unit: mm[inch]  
Pin diameter tolerances: 0.05mm [ 0.002inch]  
General tolerances: 0.25mm [ 0.010inch]  
PIN connection  
PIN  
Single  
Dual  
1
2
3
4
5
6
7
8
+Vin  
+Vin  
-Vin  
-Vin  
Remote On/Off  
Remote On/Off  
-Sense  
+Vout  
+Sense  
COM  
+Vout  
COM  
-Vout  
-Vout  
Trim  
Trim  
Page 3 of 3  
40DDW_1.5 – Rev. 2016-1.2  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明