45ACDR_48S3 [GAPTEC]

45W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply;


型号：	45ACDR_48S3
厂家：	GAPTEC
描述：	45W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated Industrial DIN Rail Power Supply
文件：	总3页 (文件大小：648K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

45ACDR_S3 Series

45W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Industrial DIN Rail Power Supply

AC-DC Converter

45 Watt

High eﬃciency up to 89%

Universal AC input range

(90~264VAC)

Over voltage protection

Over current protection

Short circuit protection (SCP)

100% full load burn-in test

Wide operating ambient

temperature (-25°C~70°C)

The 45ACDR_S3 series features standard rail mounting, energy eﬃciency

and is highly cost-eﬀective. The series oﬀers stability and high noise

immunity especially for industrial control equipment, machinery and

other demanding environments for industrial equipment. This converter

oﬀers a compact and light weight design with and standard rail installati-

on (32mm). Furthermore this series oﬀers Easy Fuse Tripping due and a

built-in DC OK relay contact. The converter can be installed on TS-35/7.5

or TS-35/15.

Suitable for critical

applications

Cooling by free air convection

Common speciﬁcations

Short circut protection:

Temperature rise at full load:

Cooling:

Input speciﬁcations

Long-term mode, automatic recovery

40°C MAX

Input voltage range

Input frequency

Input current

90~264VAC

47~63Hz

115VAC

• 1.1A (max)

230VAC

Free air convection

-20°C~+70°C (with derating)

-40°C ~+85°C

• 0.4A (max)

Operation temperature range:

Storage temperature range:

Storage humidity range:

Temperature coeﬃcient:

MTBF (using MIL-HDBK-217F):

Safety standards:

Inrush current

Cold start

110VAC

• 15A (max)

230VAC

• 35A (max)

< 95%

Leakage current

Input—output: <0.25mA

Input—PE: <3.5mA

0.03%/°C MAX

+25°C >200,000 hours

Designed to meet the following: UL8750,

UL1310-2, EN61347, EN61547

Output speciﬁcations

Item

Test conditions

Min Typ

Max

Units

Reliability/Burn-in test:

230VAC (50Hz) input voltage applied to

the power supply. Full load is applied on

the product in a 40+/-5 degrees Envi-

ronment in a burn-in room for 4 hours

Load dynamic

response

Settling time 10ms R/s

1A/us load 25%~75%full

load

Case material:

Heat-resistant Plastic (UL94-V0) and

metal

Line regulation

Load regulation

Set-up time

Dimensions:

Weight:

126*102*34mm (L*W*H)

0.31kg

115VAC/230VAC

full load

Rise time

The output voltages

shall rise from 10% to

90% of their output

voltage.

100

Isolation speciﬁcations

Hold-up time

@115VAC, full load

Power on/oﬀ

Item

Test condition

Min

Typ

Max

Units

VAC

Overshoot and

undershoot

Withstand voltage*

• Primary-Sec. ≤10mA

• Primary-PG ≤10mA

• Secondary-PG ≤10mA

3000

1500

500

Switching frequency

Note:

1) Oscilloscope should be limited at 20MHZ bandwidth.

2) At output terminals with parallel 0.1uF ceramic and 22uF electrolytic capacitors

100

KHz

Isolation resistance

MΩ

* Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA

Protection speciﬁcations

Example:

45ACDR_24S3

Over-current

protection

110%~150%Io

constant current limiting,Reset must be need when

Output Limit current to get right.

45= 45 Watts

AC= AC/DC

DR= Din Rail

24= Vout

S= Single Output

3= 3000VAC

Over-voltage

protection

120%~135%Vo

Reset must be need when over voltage to get right.

The protection time hold-up for 10 seconds or up.

Note:

1. All parameters NOT specially mentioned are measured at rated input, rated load

and 25°C of ambient temperature.

Page 1 of 3

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

45ACDR_S3 – Rev. 2019-1.0

Speciﬁcations subject to change without notice.

45ACDR_S3 Series

45W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Industrial DIN Rail Power Supply

EMC speciﬁcations

EMC / CE

Compliance to EN55015, Class B

Compliance to EN61000-3-2

Compliance to EN61000-4-2

Compliance to EN61000-4-3

Compliance to EN61000-4-4

Compliance to EN61000-4-5

Compliance to EN61000-4-6

Compliance to EN61000-4-11

Conducted emission Test

EMC / RE

Radiated emission Test

EMC / HARMONIC

EMC / ESD

EMC / RS

Harmonic current emissions

Electrostatic Discharge: 8kV air discharge, 4kV contact discharge

Radio-Frequency Electromagnetic Field Susceptibility Test-RS

Electrical Fast Transient / Burst-EFT 2kV

Surge Immunity Test: AC Power Line: line to line 1 kV, line to earth 2 kV

Conducted Radio Frequency Disturbances Test-CS

Voltage Dips

EMC / EFT

EMC / SURGE

EMC / CS

EMC / DIP

The power supply is considered as a component which will be installed into a ﬁnal equipment.

The ﬁnal equipment must be re-conﬁrmed that it still meets EMC directives.

Model

Power

[W]

Output

[Vo, VDC]

Rated Current

[A]

Current Range

[A]

Ripple&Noise*

[mV, max]

Eﬃciency

[%, typ]

45ACDR_12S3

45ACDR_24S3

45ACDR_48S3

3.75

0~3.75

0~2

100

120

200

0~1

* Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

Typical characteristics

Load-ambient derating curve

Ambient temperature (°C)

Page 2 of 3

45ACDR_S3 – Rev. 2019-1.0

Speciﬁcations subject to change without notice.

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

45ACDR_S3 Series

45W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

Industrial DIN Rail Power Supply

Mechanical dimensions

45ACDR_S

Page 3 of 3

45ACDR_S3 – Rev. 2019-1.0

Speciﬁcations subject to change without notice.

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

相关型号：