5ACE_24S4 [GAPTEC]
5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated;
| 型号： | 5ACE_24S4 |
| 厂家： | 
GAPTEC |
| 描述： | 5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated |
| 文件： | 总5页 (文件大小：3441K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
5ACE_4 Series
5W- Single Output AC-DC Converter - Universal Input - Isolated & Regulated
AC-DC Converter
5 Watt
Universal input:
Short circuit protection (SCP)
The 5ACE_4 series is a compact size power converter series offered by
85~264VAC/120~370VDC
High isolation up to 4000VAC
High efficiency, high reliability
Operating temperature:
-40°C ~ +70°C
Output over voltage protection GAPTEC. It features universal input voltage, taking both DC and AC
Over current protection
IEC62368, UL62368, EN62368
approval
EMI performance meets
CISPR32 / EN55032 CLASS B
PCB mounting, Chassis moun-
ting with screw terminals, DIN
rail mounting
input voltage, low power consumption, high efficiency, high reliability,
safer isolation. It offers good EMC performance and is UL & CE certified,
and widely used in industrial, electricity, instruments, telecommuni-
cation and civil applications.
Regulated output, low output
ripple & noise
Approval
Model
Output
[Vo]
Output current
[lo]
Efficiency
[%, typ]
Capacitive load
[µF, max]
UL/CE
UL/CE
UL/CE
UL/CE
UL/CE
UL/CE
5ACE_03S4
5ACE_05S4
5ACE_09S4
5ACE_12S4
5ACE_15S4
5ACE_24S4
3.3V
5V
1000mA
1000mA
560mA
420mA
330mA
210mA
68
75
77
79
79
81
5000
5000
1200
1200
1000
330
9V
12V
15V
24V
* Add suffix CM for Chassis mounting with screw terminals (f.ex. 5ACE_15S4CM) or suffix DR for DIN rail mounting (f.ex. 5ACE_15S4DR).
See different package measurements at common specifications.
Input specifications
Input voltage range
Input frequency
Input current
Output specifications
85~264VAC, 120~370VDC
47~63Hz
Voltage set accuracy
2ꢀ
3ꢀ at 3.3V output
Line regulation (full load)
Load regulation (0ꢀ to 100ꢀ)
Ripple & Noise (p-p)
0.5ꢀ (typ)
115VAC
• 130mA (typ)
230VAC
• 70mA (typ)
1ꢀ (typ)
Inrush current
115VAC
• 10A (typ)
230VAC
• 20A (typ)
20MHz Bandwidth:
50mV (typ), 100mV (max)
Leakage current
230VAC/50Hz: 0.1mA RMS Max.
Short circuit protection
Over current protection
Hiccup, continuous, self-recovery
≥120ꢀ Io, self-recovery
Recommended External
Input Fuse
• 1A/250V • Slow-Blow
required
Over voltage protection
• 3.3/5VDC output: ≤7.5VDC
Hot plug
Unavailable
• 9VDC output:
≤15VDC
• 12/15VDC output: ≤20VDC
• 24VDC output: ≤30VDC
Output voltage (setting accuracy)
Minimum load
1ꢀ (typ)ꢁ 3ꢀ (max)
0ꢀ
Note:
1. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta=25°C, humidity<75ꢀ with nominal input voltage and rated
output loadꢁ
Hold-up time
• 115VAC: 5ms (typ)
• 230VAC: 50ms (typ)
2. All index testing methods in this datasheet are based on our Company’s corpo-
rate standardsꢁ
3. We can provide product customization service, please contact our technicians
directly for specific informationꢁ
4. Products are related to laws and regulations: see „Features“ and „EMC“ꢁ
5. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Example:
5ACE_05S4
5= 5Watt; AC= AC-DC; E= case style; 5Vout; S= Single Output;
4= 4kVAC
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACE_4 – Rev. 2019-1.0
Specifications subject to change without notice.
5ACE_4 Series
5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Common specifications
Operating temperature range
-40°C ~ +70°C
Power derating temperature range
• 55°C ~ 70°C:
• -40°C ~ 0°C:
• 85-100VAC:
3ꢀ/°C
1.13ꢀ/°C
1ꢀ/VAC
Storage temperature range
Humidity
-40°C ~ +105°C
95ꢀ MAX
Soldering temperature
• Wave-soldering: 260 5°Cꢁ time: 5 - 10s
• Manual-welding: 360 10°Cꢁ time: 3 - 5s
Temperature coefficient
Switching frequency
I/O-isolation voltage
EMC / EMI / CE
0.02ꢀ/°C
100kHz TYP
4000VAC/1Min (Electric strength test for 1min., leakage current <5mA)
CISPR32/EN55032,
CLASS A
CLASS B (see EMC recommended circuit)
EMC / EMI / RE
CISPR32/EN55032,
CLASS A
CLASS B (see EMC recommended circuit)
EMC / EMI / ESD
EMC / EMI / RS
EMC / EMI / EFT
IEC/EN 61000-4-2
IEC/EN 61000-4-3
Contact 6KV / Air 8KV
10V/m
perf. Criteria B
perf. Criteria A
IEC/EN 61000-4-4
EC/EN 61000-4-4
2kV (see typical applications circuit)
4kV (see EMC recommended circuit)
perf. Criteria B
perf. Criteria B
EMC / EMI / Surge
IEC/EN 61000-4-5
IEC/EN 61000-4-5
line to line 1KV (see typical applications circuit)
line to line 2KV / line to ground 4KV
(see EMC recommended circuit)
perf. Criteria B
perf. Criteria B
EMC / EMI / CS
IEC/EN61000-4-6
IEC/EN61000-4-11
10 Vr.m.s
0ꢀ-70ꢀ
perf. Criteria A
perf. Criteria B
EMC / EMI / Voltage dips, short and
interruptions immunity
Safety standards
Safety certification
Safety class
MTBF
IEC62368/EN62368/UL62368
IEC62368/EN62368/UL62368
CLASS II
>300,000h @25°C
Case material
Install
UL94V-0
PCB mounting, Chassis mounting with Screw Terminals, Din rail mounting
Package
• 37.00 x 24.50 x 18.00 mm (PCB mounting)
• 76.00 x 31.50 x 26.80 mm (Chassis mounting with Screw Terminals)
• 76.00 x 31.50 x 31.40 mm (DIN rail mounting)
Weight
• 25g (PCB mounting)
• 47g (Chassis mounting with Screw Terminals)
• 69g (DIN rail mounting)
Typical characteristics
5ACE
5ACE
5ACE
5ACE
Page 2 of 5
5ACE_4 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACE_4 Series
5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
Efficiency
5ACE_24S4
5ACE_12S4
5ACE_05S4
5ACE_24S4
5ACE_12S4
5ACE_05S4
Typical application circuit
Output Filter Components:
We recommend using an electrolytic capacitor with high frequency, and low
ESR rating for C2 (refer to manufacture’s datasheet). Choose a Capacitor
voltage rating with at least 20ꢀ margin, in other words not exceeding 80ꢀ.
C1 is a ceramic capacitor used for filtering high-frequency noise and TVS is
a recommended suppressor diode to protect the application in case of a
converter failure.
Model
C1 (µF)
C2 (µF)
150
FUSE
MOV
TVS tube
SMBJ7.0A
SMBJ7.0A
SMBJ12A
SMBJ20A
SMBJ20A
SMBJ30A
5ACE_03S4
5ACE_05S4
5ACE_09S4
5ACE_12S4
5ACE_15S4
5ACE_24S4
150
1A/250V
slow-blow
required
120
1
S14K350
120
120
68
EMC compliance recommended circuit
Page 3 of 5
5ACE_4 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACE_4 Series
5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
PCB mounting
Chassis mounting with screw terminals
Page 4 of 5
5ACE_4 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACE_4 Series
5W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
DIN rail mounting
Page 5 of 5
5ACE_4 – Rev. 2019-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号：
©2020 ICPDF网 联系我们和版权申明