5ACFEW_05S3 [GAPTEC]
5Watt AC-DC converter;型号: | 5ACFEW_05S3 |
厂家: | GAPTEC |
描述: | 5Watt AC-DC converter |
文件: | 总6页 (文件大小:672K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
5ACFEW_3 series
5Watt AC-DC converter
AC-DC Converter
5 Watt
Ultra-wide 85 - 305VAC &
70-430VDC input voltage range
Accepts AC or DC input
(dual-use of same terminal)
Operating ambient temp.
range -40°C to +85°C
Controllable life and
adjustable cost
5ACFEW_3 series is one of GAPTEC’s highly efficient green power AC-DC
converter series. They feature wide input range accepting either AC or
DC voltage, high efficiency, low power consumption and reinforced
isolation. All models are particularly suitable for industrial control,
electric power, instrumentation and smart home applications which
have high requirement for dimension and don’t have high requirement
on EMC. For extremely harsh EMC environment, we recommend using
the application circuit show in Design Reference of this datasheet.
No-load power
consumption: 0.1W
Output short circuit,
over-current protection
Design meets IEC/EN61558,
IEC/EN60335 standards
IEC/EN/UL62368 safety
approved
Multi application,
flexible layout
Compact size, high power
density, green power
UL-62368-1 (E347551)
Common specifications
Short circuit protection:
Temperature rise at full load:
Output specifications
Hiccup, continuous, self-recovery
25°C TYP
Item
Operating Conditions
10% - 100% load
Min Typ
5
Max
Units
%
Output voltage
accuracy*
Cooling:
Free air convection
-40°C to +85°C
-40°C to +105°C
< 95%
Line regulation
Load regulation
Temperature drift
Ripple & Noise*
Rated load
1.5
3
%
Operation temperature range:
Storage temperature range:
Storage humidity range:
Power derating:
10% - 100% load
100% full load
%
0.15
%/°C
20MHz Bandwidth
(peak-peak value)
10% - 100% load
+55°C to +85°C: 1.67%/°C MIN
85VAC - 100VAC: 1.33%/VAC MIN
277VAC - 305VAC: 0.72%/VAC MIN
80
0.1
150
mV
W
Stand-by Power
0.15
Safety standard:
IEC/EN/UL62368, IEC/EN60335,
IEC/EN61558
Over-current
Protection
≥110% Io self-recovery
Safety-regulated certification:
Safety class:
IEC/EN/UL62368
Class II
Min. load
10
%
1. * The “parallel cable” method is used for ripple and noise test, please refer to
AC-DC Converter Application Notes for specific information;
2. The product is able to work with 0%-10% load and with stable output.
Hot plug:
Unavailable
Case material:
Plastic [UL94-V0]
26.40x14.73x11.00mm
>1000,000 hours
5.2g
Dimension:
MTBF (MIL-HDBK-217F@25°C):
Weight:
Example:
5ACFEW_03S3
Input specifications
5 = 5Watt; AC = AC-DC; F = Open Frame; E = series; W = wide input
03 = 3Vout; S = single output; 3 = 3 kVAC isolation
Item
Operating Conditions
Min
Typ
Max
Units
Input voltage range • AC Input
• DC Input
85
70
305
430
VAC
VDC
Input frequency
47
63
Hz
Note:
1. External electrolytic capacitors are required to modules, more details refer to
typical applications;
2. This part is open frame, at least 6.4mm creepage distance between the primary
and secondary external components of the module is
needed to meet the safety requirement, refer to the recommended welding hole
design in the external dimension drawing;
3. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75%, nominal input
voltage (115V and 230V) and rated output load;
4. All index testing methods in this datasheet are based on our company corpo-
rate standards;
5. We can provide product customization service, please contact our technicians
directly for specific information;
6. Products are related to laws and regulations: see Features“ and “EMC“;
7. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Input current
• 115VAC
• 230VAC
0.2
0.1
A
A
Inrush current
• 115VAC
• 277VAC
20
40
A
A
Recommended
External Input Fuse
1A, slow-blow, required (The actual use needs to be selec-
ted according to the application enviroment)
Isolation specifications
Item
Operating Conditions
Min
Typ
Max
Units
VAC
Isolation voltage
Electric Strength Test
for 1min., leakage
current < 5mA
3000
Page 1 of 6
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 series
5Watt - AC-DC converter
Approval
Model
Power
[W]
Output
[Vo]
Output
[lo]
Efficiency
[%, typ]
Capacitive load
[µF, max]
UL/CE
UL/CE
UL/CE
UL/CE
UL/CE
UL/CE
5ACFEW_03S3
5ACFEW_05S3
5ACFEW_09S3
5ACFEW_12S3
5ACFEW_15S3
5ACFEW_24S3
3.3
5
3.3V
5V
1000mA
1000mA
560mA
420mA
340mA
210mA
69
76
77
79
79
81
2200
1500
680
470
5
9V
5
12V
15V
24V
5
330
5
100
1. The nominal output voltage refers to the voltage applied to the load terminal after adding external circuits.
2. If the product is used in a severe vibration application, it needs to be glued and fixed.
Electromagnetic Compatibility (EMC)
CISPR32/EN55032 CLASS A (Application circuit 1, 4)
Emissions
Emissions
CE
RE
CISPR32/EN55032 CLASS B (Application circuit 2, 3)
CISPR32/EN55032 CLASS A (Application circuit 1, 4)
CISPR32/EN55032 CLASS B (Application circuit 2, 3)
Immunity
Immunity
ESD
RS
IEC/EN 61000-4-2
IEC/EN 61000-4-3
Contact 6KV
10V/m
perf. Criteria B
perf. Criteria A
IEC/EN 61000-4-4
IEC/EN 61000-4-4
2kV (see application circuit 1, 2)
4kV (see application circuit 3, 4)
perf. Criteria B
perf. Criteria B
Immunity
EFT
IEC/EN 61000-4-5
IEC/EN 61000-4-5
line to line 1KV (Application circuit 1, 2)
line to line 2KV (Application circuit 3, 4)
perf. Criteria B
perf. Criteria B
Immunity
Immunity
Surge
CS
IEC/EN 61000-4-6
10 Vr.m.s
perf. Criteria A
Voltage dip, short interrup-
tion
and voltage variation
Immunity
IEC/EN 61000-4-11
0%-70%
perf. Criteria B
Product typical curve
1. With an AC input between 85 -100VAC/277- 305VAC and a DC input between 70 - 120VDC/390 - 430VDC, the output power must be derated
as per temperature derating curves;
2. This product is suitable for applications using natural air cooling; for applications in closed environment please consult factory or one of our FAE.
Efficiency
5ACFEW_24S3
5ACFEW_24S3
5ACFEW_12S3
5ACFEW_12S3
5ACFEW_05S3
5ACFEW_05S3
Page 2 of 6
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
5ACFEW_3 series
5Watt - AC-DC converter
Typical application circuit
Additional components selection guide (No EMC devices)
Model
C1
C2
L1
C3
C4
CY1
(required)
TVS
(required)
(required)
(required)
(required)
820μF/6.3V
5ACFEW_03S3
(solid-state capacitor)
10μF/450V
100μF/35V
47μF/35V
SMBJ7.0A
(-25°C to +85°C,
470μF/16V
(solid-state capacitor)
5ACFEW_05S3
85-305VAC input;
1.0nF/
400VAC
-40°C to +85°C,
0.1μF/
50V
4.7uH/60mΩ
5ACFEW_09S3
SMBJ12A
SMBJ20A
SMBJ30A
165-305VAC input)
270μF/16V
(solid-state capacitor)
22μF/450V
5ACFEW_12S3
(-40°C to +85°C,
5ACFEW_15S3
5ACFEW_24S3
85-305VAC input)
220uF/35V
Note:
1. C1 is used as filter capacitor with AC input (must be connected externally) and as EMC filter capacitor with DC input (must be connected), and it
is recommended to use the capacitor with ripple current >200mA@100KHz. If C1 capacity is more than 22μF, can not connect current limiting resistor
R1(R1 is EMS protective circuit device, see application circuit).
2. We recommend using an electrolytic capacitor with high frequency and low ESR rating for C3 (refer to manufacture’s datasheet), electrolytic capacitor can
be used for C2 when applied in normal and high temperature environments. Combined with C2, L1, they form a pi-type filter circuit. Choose a capacitor
voltage rating with at least 20% margin, in other words not exceeding 80%. C4 is a ceramic capacitor, used for filtering high frequency noise.
3. A suppressor diode (TVS) is recommended to protect the application in case of converter failure and specification should be 1.2 times of the output voltage.
EMC recommended circuit
Environmental application EMC solution selection table
Recommended
circuit
Application
environmental
Typical industry
Input voltage
range
Environment
Emissions
Immunity
temperature (°C)
CLASS A
1
Basic application
None
-40 to +85
-25 to +55
CLASS III
Indoor civil
environment
Smart home/Home appliances
(2Y)
2
CLASS B
CLASS III
Indoor general
environment
Intelligent building/Intelligent
agriculture
85 ~ 305VAC
Indoor industrial
environment
3
Manufacturing workshop
-25 to +55
-40 to +85
CLASS B
CLASS A
CLASS IV
CLASS IV
ITS/Video monitoring/Charging
point/Communication/Security
and protection
Outdoor general
environment
4
Page 3 of 6
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 series
5Watt - AC-DC converter
Electromagnetic Compatibility Solution-Recommended Circuit
1. Application circuit 1—Basic application
recommended circuit 1
Application environmental
Ambient temperature range
Immunity CLASS
Emissions CLASS
Basic application
-40°C to +85°C
CLASS III
CLASS A
FUSE (required)
1A/300V, slow-blow
12Ω/3W
R1 (required)
LDM
4.7mH/Max: 15Ω/Min: 0.2A
al environment
cuits for gener
em recommended cir
ersal syst
tion circuit 2—Indoor civil / Univ
2. Applica
recommended cꢀrcuꢀt 2
Ambient temperature range
Application environmental
Immunity CLASS
Emissions CLASS
Indoor civil /general
-25°C to +55°C
CLASS III
CLASS B
Component
R1 (required)
LDM
Recommended value
12Ω/3W
1.2mH/Max: 4.0Ω/Min: 0.2A
0.1μF/310VAC
CX
FUSE (required)
1A/300V, slow-blow
Note
1: In the home appliance application environment, the two Y capacitors of the primary and secondary need to be externally connected
(CY1/CY2, value at 2.2nF/250VAC), which can meet the EN60335 certification.
2: According to the certification requirements, the X capacitor needs to be connected in parallel with the bleeder resistance, the
recommended resistance value is less than 3.8MΩ, and the actual need to be selected according to the certification standard.
Page 4 of 6
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 series
5Watt - AC-DC converter
onment
cuits for indoor industrial envir
em recommended cir
ersal syst
tion circuit 3—Univ
3. Applica
recommended cꢀrcuꢀt 3
Application environmental
Ambient temperature range
Immunity CLASS
Emissions CLASS
Indoor industrial
-25°C to +55°C
CLASS IV
CLASS B
Component
MOV
Recommended value
S14K350
0.1μF/310VAC
CX
LDM
1.2mH/Max: 4.0Ω/Min: 0.2A
12Ω/3W
R1 (required)
FUSE (required)
1A/300V, slow-blow
Note: According to the certification requirements, the X capacitor needs to be connected in parallel with the bleeder resistance, the recommended resistance value is
less than 3.8MΩ, and the actual need to be selected according to the certification standard.
al environment
door gener
cuits for out
em recommended cir
ersal syst
tion circuit 4—Univ
4. Applica
recommended cꢀrcuꢀt 4
Application environmental
Ambient temperature range
Immunity CLASS
Emissions CLASS
Indoor industrial
-25°C to +55°C
CLASS IV
CLASS B
Component
MOV
Recommended value
S14K350
0.1μF/310VAC
CX
LDM
1.2mH/Max: 4.0Ω/Min: 0.2A
12Ω/3W
R1 (required)
FUSE (required)
1A/300V, slow-blow
Note: According to the certification requirements, the X capacitor needs to be connected in parallel with the bleeder resistance, the recommended resistance value is
less than 3.8MΩ, and the actual need to be selected according to the certification standard.
Page 5 of 6
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
5ACFEW_3 series
5Watt - AC-DC converter
Mechanical dimensions
_XXS3 series dimensions
5ACFW
ecommended pad
_XXS3 series r
5ACFEW
Page 6 of 6
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
5ACFEW_3 – Rev. 2020-1.1
Specifications subject to change without notice.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明