60DDW_4805S1.5 [GAPTEC]
60W - Single Output - Wide Input - Isolated & Regulated;型号: | 60DDW_4805S1.5 |
厂家: | GAPTEC |
描述: | 60W - Single Output - Wide Input - Isolated & Regulated |
文件: | 总3页 (文件大小:563K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
60DDW Series
60W - Single Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
DC-DC Converter
60 Watt
The 60DDW series offers 60W of output, wide input voltage of
18-36VDC, 36-75VDC and features 1500VDC isolation, six-sided
metal shield over current and short circuit protection.
High efficiency up to 91%
2:1 wide input voltage range
Isolation voltage 1500VDC
Six-sided metal shield
Short circuit protection (SCP)
(automatic recovery)
Operating temperature:
-40°C to +85°C
Over temperature protection
Industry standard pinout
Under voltage lockout
All models are particularly suited to tele-communications, industrial,
test equipments power etc.
Common specifications
Cooling:
Output specifications
Free air convection
Item
Test condition
Min Typ
Max
2
Units
ꢀ
Short circuit protection:
Operation temperature range:
Storage temperature range:
Case temperature:
Continuous, auto-recovery
-40°C~+85°C
Voltage tolerance
Output voltage
adjustment1%
10
ꢀ
-55°C~+125°C
Line regulation
Load regulation
Vin min. to Vin max.
0.5
0.5
ꢀ
ꢀ
105°C MAX
+Vin Short to +Sense,
-Vin Short to -Sense
Lead temperature range:
Switching frequency (PWM mode%:
Humidity:
265°C MAX, 1.5mm from case for 10 sec
300kHz TYP
Cross variation
25ꢀ / 100ꢀ (Dual
output%
5
ꢀ
non-condensing, 95ꢀ MAX
Ripple and noise2%
Start-up time
20MHz Bandwidth
100
mV
ms
Case material:
Black coated copper (or nickel coated%
with non-conductive Bbase
nominal Vin and cons-
tant resistive load
25
Potting material:
Epoxy (UL94V-0 rated%
>110,000 hours
70g
Transient response 25ꢀ load step change
time
300
150
µs
MTBF (MIL-HDBK-217F @25°C%*:
Weight:
Over load
protection
Input voltage range
ꢀIo
* BELLCORE TR-NWT-000332. Case 1: 50ꢀ Stress, Temperature at 40ºC
MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled
environment%
Over voltage
protection
• 3.3VDC
• 5VDC
• 12VDC
• 15VDC
3.9
6.2
15
V
V
V
V
Input specifications
18
Remote ON/OFF3%
• ON
Open
Item
Test condition
Min
Typ
Max
Units
• OFF
• Off idle current
Short to -Vin
Start-up voltage /
under voltage lockout
• 24Vin
• 48Vin
17.3/16.8
34/32
VDC
VDC
2.5
mA
1% Maximum output deviation is 10ꢀ inclusive of remote sense and trim. If remote
sense is not being used, the +sense should be connected to its corresponding
+OUTPUT and likewise the –sense should be connected to its corresponding -OUT-
PUT.
2% Test ripple and noise by “parallel cable” method. Typical value at nominal input
voltage and no load.
Surge voltage
100ms max.
• 24Vin
• 48Vin
50
100
V
V
Conducted noise*
Filter
EN 55022 level A, FCC part 15,
level A with external capacitor
3% The ON/OFF control pin voltage is referenced to -Input. (Leave open if not used.%
Pi type
* The 60DDW series can meet EN55022 Class A with parallel an external
capacitor to the input pins.
Recommend:
24Vin : 4.7µF/50V X7R 1812 MLCC
48Vin : 2.2µF/100V X7R 1812 MLCC
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Input/Output, tested
for 1 minute
1500
Isolation resistance
Isolation capacitance
Input/Output
Input/Output
1000
MΩ
Model selection:
WCTV_xxyyN##
2500
pF
W= Watt; C=Case; T= Type; V= Voltage Variation (omitted 10ꢀ%;
xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation (kVDC%
Note:
1. Input voltage can’t exceed this value, or will cause the permanent damage.
2. The load shouldn‘t be less than 5ꢀ, otherwise ripple will increase dramatically.
3. Max. Capacitive Load is tested on Vin-nominal and full load.
4. All specifications measured at Ta=25°C, humidity<75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
Example:
60DDW_2415S1.5
60= 60Watt; D= DIP; D= series; W= wide input (4:1) 18-36Vin;
15Vout; S= single output; 1.5= 1500VDC
5. In this datasheet, all the test methods of indications are based on corporate
standards.
6. Only typical models listed, other models may be different, please contact our
technical person for more details.
7. Specifications subject to change without notice.
Page 1 of 3
GAPTEC-Electronic GmbH & Co. KG
60DDW – Rev. 2016-1.0
sales@gaptec-electronic.com – www.gaptec-electronic.com
Specifications subject to change without notice.
60DDW Series
60W - Single Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
Part Number
Input Voltage Range
[VDC]
Input current [mA, typ]
no load full load
Output Voltage [VDC]
Output Current [mA]
Efficiency
[%, Typ.]
Capacitive load
[µF, max.]
60DDW_2403S1.5
60DDW_2405S1.5
60DDW_2412S1.5
60DDW_2415S1.5
60DDW_4803S1.5
60DDW_4805S1.5
60DDW_4812S1.5
60DDW_4815S1.5
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
70
120
30
30
60
70
25
25
2162
2777
2777
2777
1081
1388
1388
1388
3.3
5
14000
12000
5000
89
90
90
90
89
90
90
90
28800
15000
2800
12
15
3.3
5
4000
1800
14000
12000
5000
28800
15000
2800
12
15
4000
1800
Typical characteristics
Output voltage adjustment, Control PIN suggest circuit
Page 2 of 3
60DDW – Rev. 2016-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
60DDW Series
60W - Single Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
EMC considerations
Suggested Schematic to comply with Conducted Noise according to EN55022 Class B
Recommended Layout with input Filter
Following components are needed to comply with EN55022 Class B conducted noise:
60DDW_24xx
Component
C1, C3
C5, C6
L1
Value
4.7µF
Voltage
50V
Reference
1812 MLCC
1000pF
450µH
2KV
1206 MLCC
Common mode choke
60DDW_48xx
Component
C1, C2, C3, C4
C5, C6
Value
2.2µF
Voltage
100V
2KV
Reference
1812 MLCC
1000pF
830µH
1206 MLCC
L1
Common mode choke
Mechanical dimensions
Note:
Unit: mm[inch]
Pin diameter tolerances: 0.05mm [ 0.002inch]
General tolerances: 0.25mm [ 0.010inch]
PIN connection
PIN
1
2
3
4
5
6
7
8
Single
+Vin
-Vin
Ctrl
-Sense
+Sense
+Vout
-Vout
Trim
Page 3 of 3
60DDW – Rev. 2016-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明