首页 |元器件品牌

380CA002N3620A [GLENAIR]

Connector Accessory,;
380CA002N3620A
型号： 380CA002N3620A
厂家： Glenair    Glenair
描述：

Connector Accessory,

连接器 连接器支架
文件： 总5页 (文件大小：669K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
380-002  
EMI/RFI Non-Environmental Backshell  
with Strain Relief  
Type A - Direct Coupling - Low Profile  
CONNECTOR  
380 F S 002 M 16 10 H 6  
DESIGNATORS  
Product Series  
Length: S only  
A-B*-C-D-E-F  
G-H-J-K-L-S  
(1/2 inch increments:  
e.g. 6 = 3 inches)  
Connector  
Designator  
Strain Relief Style  
(H, A, M, D)  
Angle and Profile  
A = 90°  
* Conn. Desig. B See Note 5  
B = 45°  
S = Straight  
Cable Entry (Tables X, XI)  
Shell Size (Table I)  
Finish (Table II)  
DIRECT  
COUPLING  
Basic Part No.  
TYPE A OVERALL  
SHIELD TERMINATION  
Length ± .060 (1.52)  
Min. Order Length 2.5 Inch  
(See Note 4)  
A Thread  
(Table I)  
Length ± .060 (1.52)  
Min. Order Length 3.0 Inch  
(See Note 4)  
B
(Table I)  
STYLE 2  
(STRAIGHT  
See Note 1)  
J
G
(Table  
IV)  
J
E
(Table  
III)  
(Table III)  
(Table  
IV)  
F (Table IV)  
B
B
(Table I)  
(Table I)  
H (Table IV)  
STYLE H  
Heavy Duty  
(Table X)  
STYLE A  
Medium Duty  
(Table XI)  
STYLE M  
Medium Duty  
(Table XI)  
STYLE D  
Medium Duty  
(Table XI)  
W
T
.135 (3.4)  
Max  
X
Cable  
Range  
Cable  
Range  
Cable  
Cable  
Entry  
Y
V
Y
Range  
Z
© 2005 Glenair, Inc.  
CAGE Code 06324  
Printed in U.S.A.  
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912  
www.glenair.com  
E-Mail: sales@glenair.com  
Series 38 - Page 18  
380-002  
EMI/RFI Non-Environmental Backshell  
with Strain Relief  
Type A - Direct Coupling - Low Profile  
TABLE III: FRONTADAPTER  
See inside back cover fold-out or pages 13 and 14  
J Max - Conn. Designator  
Shell  
Size  
A-E-F  
J-H-L-S  
for unabridged Tables I and II.  
D-B-G-K  
C
TABLE IV: ELBOW DIMENSIONS  
08/09 1.180(30.0) 1.440 (36.6)  
10/11 1.180(30.0) 1.440 (36.6)  
Elbow  
Size  
E
F
G
H
Max  
Max  
Max  
Max  
12/13 1.180(30.0) 1.440 (36.6) 1.735(44.1)  
14/15 1.180(30.0) 1.440 (36.6) 1.915(48.6)  
16/17 1.380(35.0) 1.560(39.6) 1.915(48.6)  
18/19 1.380(35.0) 1.560(39.6) 1.915(48.6)  
20/21 1.380(35.0) 1.560(39.6) 1.915(48.6)  
22/23 1.380(35.0) 1.560(39.6) 1.915(48.6)  
24/25 1.380(35.0) 1.560(39.6) 1.915(48.6)  
28/29 1.610 (40.9) 1.560(39.6) 1.915(48.6)  
32/33 1.610(40.9) 1.750(44.5) 1.915(48.6)  
36 1.610(40.9) 1.750(44.5) 1.915(48.6)  
40 1.610(40.9) 2.190(55.6) 1.915(48.6)  
04 .567 (14.4) 1.187 (30.1) .636 (16.2) 1.200 (30.5)  
06 .630 (16.0) 1.250 (31.8) .710 (18.0) 1.320 (33.5)  
08 .692 (17.6) 1.312 (33.3) .731 (18.6) 1.340 (34.0)  
10 .755 (19.2) 1.655 (42.0) .825 (21.0) 1.660 (42.2)  
12 .848 (21.5) 1.765 (44.8) .988 (25.1) 1.750 (44.5)  
16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 1.925 (48.9)  
20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 2.033 (51.6)  
24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 2.200 (55.9)  
28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 2.450 (62.2)  
32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) 2.450 (62.2)  
TABLE X: CABLE ENTRY  
TABLE II: STANDARD FINISHES  
GLENAIR  
SYMBOL FINISH  
Dash  
No.  
04  
06  
08  
10  
12  
16  
20  
T
Max  
V
Cable Range  
Max  
Min  
Max  
B
M
Cadmium Plate, Olive Drab  
Electroless Nickel  
.780 (19.8)  
.957 (24.3)  
.125 (3.2)  
.250 (6.4)  
.312 (7.9)  
.350 (8.9)  
.500 (12.7)  
.625 (15.9)  
.875 (22.2)  
.312 (7.9)  
.437 (11.1)  
.562 (14.3)  
.625 (15.9)  
.750 (19.1)  
.937 (23.8)  
1.250 (31.8)  
1.375 (34.9)  
1.625 (41.3)  
1.875 (47.6)  
.780 (19.8) 1.145 (29.1)  
.780 (19.8) 1.332 (33.8)  
.780 (19.8) 1.332 (33.8)  
.811 (20.6) 1.551 (39.4)  
.905 (23.0) 1.770 (45.0)  
1.092 (27.7) 2.113 (53.7)  
NF  
Cadmium Plate, Olive Drab  
Over Electroless Nickel  
See Inside Back Cover  
for Additional Finish Options  
1. When maximum cable entry (page 22) is  
exceeded, Style 2 will be supplied.  
(Function S only.)  
2. Metric dimensions (mm) are indicated in  
parentheses.  
24  
28  
32  
1.124 (28.5) 2.363 (60.0) 1.000 (25.4)  
1.399 (35.5) 2.770 (70.4) 1.250 (31.8)  
1.399 (35.5) 3.020 (76.7) 1.437 (36.5)  
3. Cable range is defined as the accommo-  
dations range for  
the wire bundle  
or cable. Dimen-  
sions shown are  
not intended for  
inspection  
TABLE XI: CABLE ENTRY  
Dash  
No.  
W
Max  
X
Max  
Y
Z
Cable Range  
Max  
Max  
Min **  
Max  
03* .437 (11.1) .760 (19.3) .843 (21.4)  
04* .437 (11.1) .760 (19.3) .906 (23.0)  
06* .500 (12.7) .760 (19.3) 1.093 (27.8)  
.630 (16.0) .156 (4.0) .250 (6.4)  
.755 (19.2) .188 (4.8) .312 (7.9)  
.942 (23.9) .281 (7.1) .438 (11.1)  
criteria.  
4. Consult factory  
for shorter  
08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3)  
10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9)  
12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1)  
16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8)  
20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8)  
24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9)  
28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3)  
32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6)  
40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3)  
lengths on  
straight  
backshells.  
5. Refer to pages  
18 and 19 for  
connector desig-  
nator B part  
numberdevelop-  
ment.  
* Not available in Style M clamp.  
** Not Applicable Style D  
© 2005 Glenair, Inc.  
CAGE Code 06324  
Printed in U.S.A.  
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912  
www.glenair.com  
E-Mail: sales@glenair.com  
Series 38 - Page 19  
TABLE I - BACKSHELL INTERFACE DIMENSIONS  
CONNECTORDESIGNATOR  
A THREAD*  
REFERENCE  
7/16 – 28 UNEF  
M12 x 1 – 6H  
1/2 – 20 UNF  
1/2 – 28 UNEF  
9/16 – 24 UNEF  
M15 x 1 – 6H  
5/8 – 24 UNEF  
5/8 – 28 UN  
11/16 – 24 UNEF  
M18 x 1 – 6H  
3/4 – 20 UNEF  
13/16 – 20 UNEF  
M22 x 1 – 6H  
7/8 – 20 UNEF  
7/8 – 28 UN  
B
C
D
E
A
C*  
D
E
F
G
H
J
K
08  
L
08  
S
08  
DIA MAX  
.590 (15.) .650 (16.5) .770 (19.6)  
.650 (16.5) .770 (19.6)  
DIA MAX  
DIA MAX  
DIA MAX  
.690 (17.5)  
.940 (24.8)  
.690 (17.5)  
08  
08 08 [9]  
10 10 [11]  
12 [13]  
09 [A]  
08  
03  
10  
.650 (16.5) .650 (16.5)  
08 [A] 10  
11  
.650 (16.5) .770 (19.6) .770 (19.6)  
.720 (18.3) .770 (19.6) .890 (22.6)  
.770 (19.6) .820 (20.8)  
.770 (19.6) .770 (19.6) .890 (22.6)  
.770 (19.6) .890 (22.6)  
.840 (21.3) .890 (22.6) 1.020 (25.9)  
.890 (22.6) .940 (23.9)  
.970 (24.6) .940 (23.9) 1.020 (25.9)  
.970 (24.6) 1.020 (29.2) 1.150 (29.2) 1.060 (26.9)  
1.030 (26.2) 1.070 (26.2) 1.290 (32.7)  
1.090 (27.7) 1.020 (25.9) 1.150 (29.2) 1.060 (26.9)  
1.030 (26.2) 1.150 (29.2)  
10  
10  
10  
.820 (20.8)  
1.060 (26.9)  
.820 (20.8)  
11 [B]  
12 [13]  
10 [B]  
12  
14  
12  
14  
12  
14  
.940 (23.8)  
1.170 (29.7)  
.940 (23.8)  
13 [C]  
15 [D]  
12 [7] 12  
14 [12] 14  
12  
11 [A]  
13 [B]  
14 [15]  
16 [17]  
14 14 [15]  
14 [D]  
16 [E]  
18 [F]  
20 [G]  
22 [H]  
24 [J]  
16  
18  
20  
22  
24  
16 16 [17]  
18 18 [19]  
20 20 [21]  
22 22 [23]  
16  
18  
20  
22  
24  
16  
15/16 – 20 UNEF  
M25 x 1 – 6H  
1 – 20 UNEF  
1 - 28 UN  
1.090 (27.7) 1.150 (29.2) 1.260 (32.0) 1.170 (29.7)  
17 [E]  
19 [F]  
21 [G]  
23 [H]  
25 [J]  
1.150 (29.2) 1.210 (30.7)  
1.420 (36.1)  
16 [19] 16  
15 [C]  
17 [D]  
19 [E]  
18  
20  
22  
24  
1.220 (29.2) 1.210 (30.7) 1.230 (31.2) 1.170 (29.7)  
1.150 (29.2) 1.360 (34.5)  
1.220 (31.0) 1.230 (31.2) 1.400 (35.6) 1.290 (32.7)  
18 [27]  
18  
18 1 1/16 – 18 UNEF  
M28 x 1 – 6H  
1.280 (32.5) 1.360 (34.5)  
1.540 (39.1)  
1 1/8 – 18 UNEF  
1 1/8 – 28 UN  
1.340 (34.0) 1.360 (34.5) 1.360 (34.5)  
1.280 (32.5) 1.480 (37.6)  
1.340 (34.0) 1.360 (34.5 1.530 (38.9) 1.420 (36.0)  
20 [37]  
20  
20 1 3/16 – 18 UNEF  
M31 x 1 – 6H  
1.410 (35.8) 1.480 (37.6)  
1.670 (42.4)  
1 1/4 – 18 UNEF  
1 1.4 – 28 UN  
1.470 (37.3) 1.530 (38.9) 1.480 (37.6)  
1.410 (35.8) 1.600 (40.6)  
1.470 (37.3 1.480 (37.6) 1.600 (40.6) 1.540 (39.1)  
22  
22 1 5/16 – 18 UNEF  
M34 x 1 - 6H  
1.530 (38.9) 1.600 (40.6)  
1.590 (40.4) 1.600 (40.6)  
2.010 (51.1)  
22  
1 3/8 – 18 UNEF  
1 3/8 – 28 UN  
1.530 (38.9) 1.730 (43.9)  
1.590 (40.4) 1.730 (43.9) 1.940 (49.3) 1.660 (42.2)  
24  
24 24 [25] 23 [F]  
24 1 7/16 – 18 UNEF  
M37 x 1 – 6H  
1.660 (42.2) 1.700 (43.2)  
1.660 (42.2) 1.670 (42.4)  
1.660 (42.2) 1.940 (49.3)  
1.820 (46.2)  
2.120 (53.8)  
61  
1 1/2 – 18 UNEF  
1 1/2 – 28 UN  
1 9/16 – UNEF  
1 5/8 – UNEF  
1 3/4 – 18 UNS  
1 7/8 – 16 UN  
2 – 18 UNS  
2 1/16 – 16 UNS  
2 1/8 – 16 UN  
2 1/4 – 16 UN  
2 5/16 – 16 UNS  
2 3/8 – 16 UN  
2 1/2 – 16 UN  
2 5/8 – 16 UN  
2 3/4 – 16 UN  
2 7/8 – 16 UN  
3 – 16 UN  
3 1/16 – 16 UN  
25 [G]  
24  
28  
32  
1.840 (46.7)  
1.940 (49.3)  
28  
28  
32  
32  
1.970 (50.0) 1.970 (50.0)  
2.090 (53.1) 2.190 (55.6) 2.190 (55.6)  
2.280 (57.9) 2.220 (56.4)  
2.010 (51.1)  
2.260 (57.4)  
29 [H]  
33 [J]  
2.340 (59.4) 2.440 (62.0) 2.440 (62.0)  
36  
40  
2.340 (59.4)  
2.440 (62.0)  
36  
36  
2.530 (64.3) 2.47 (62.7)  
2.590 (65.8)  
2.590 (65.8)  
2.780 (70.6) 2.720 (69.1)  
2.910 (73.9)  
2.530 (64.3)  
3.040 (77.2)  
2.690 (68.3)  
2.690 (68.3)  
40  
40  
44  
44  
48  
48  
2.930 (74.4)  
3.030 (77.0) 2.970 (75.4)  
3.160 (80.3)  
3.220 (81.8) 3.220 (81.8)  
3.410 (86.6)  
* Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development.  
BACKSHELLINTERFACESTANDARDS(Seepages15-17formoreinformation)  
DESIG. SPEC.  
SERIES  
DESIG. SPEC.  
SERIES  
DESIG. SPEC.  
SERIES  
DESIG. SPEC.  
SERIES  
A
MIL-DTL-5015MS3400  
MIL-DTL-26482 2  
G
H
MIL-C-28840  
MIL-DTL-38999 III&IV  
EN3645  
MIL-C-81511 1, 2, 3 & 4  
VG95329  
MIL-DTL-83723 II  
L
EN3372  
JN 1003  
A
B
C
D
E
F
PATT 602  
MIL-DTL-5015 MS3100  
MIL-C-22992 MS173XX  
MIL-DTL-26482 1  
MIL-DTL-26500 Aluminum  
MIL-DTL-38999 I&II  
40M38277  
PAN 6433-1  
PATT 614  
PATT 616  
NFC93422  
AS81703  
3
LN 29729  
NFC93422  
PAN 6433-2  
PATT 615  
VG 96912  
PATT 105  
PATT 603  
PATT 608  
MIL-DTL-83723 I&III  
40M39569  
DEF5326-3  
EN 2997, 3646  
ESC 10, 11  
LN 29504  
J
HE306  
K
S
NFC93422 HE302  
PAN 6432-1, -2  
HE308,9  
13  
Reference Information  
Standard Materials and Finishes  
TABLE II - STANDARD FINISHES  
GLENAIR  
SYMBOL  
M85049 SYMBOL  
REFERENCEONLY FINISH  
SPECIFICATION(S)  
A
B
Cadmium Plate, Bright  
AMS-QQ-P-416, Type I, Class 2  
AMS-QQ-P-416, Type II, Class 3  
AMS-A-8625, Type II, Class 2  
AMS-A-8625, Type III, Class 1  
Cadmium Plate, Olive Drab  
Anodize, Black  
C*  
G*  
J
A
Hard Coat, Anodic  
Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3AMS-QQ-P-416, Type II,  
Electroless Nickel  
Class 3 over AMS-C-26074, Class 4, Grade B  
Cadmium Plate, Bright Over  
Electroless Nickel  
1000 Hour Corrosion Resistance  
LF  
Electroless Nickel  
AMS-C-26074, Class 4, Grade B  
M
N
N
Cadmium Plate, Olive Drab Over  
Electroless Nickel  
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel  
AMS-C-26074  
Zinc Cobalt, Dark Olive Drab  
96 Hour Corrosion Resistance  
NC  
NF  
Cadmium Plate, Olive Drab Over  
Electroless Nickel  
1000 Hour Corrosion Resistance  
W
Cadmium Plate, Bright Over  
Electroless Nickel  
AMS-QQ-P-416, Type I, Class 3  
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***  
T
Cadmium Plate, Black  
AMS-QQ-P-416, Type II, Class 3  
AMS-QQ-P-416, Type II, Class 3  
U
Cadmium Plate, Black  
ZU**  
ZN  
Zinc-Nickel Alloy, Olive Drab  
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt  
Spray  
*
Anodize finish; not suitable for EMI Shielding or grounding applications.  
** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.  
The following standard materials are used for the majority of Glenair  
backshells and connector accessories. However, backshell compo-  
nents are not limited to those items listed, but are representative of  
the elements used in Glenair's general accessory products. Contact  
Glenair for applicable specifications on items not listed below.  
STANDARDMATERIALS-BACKSHELLSANDACCESSORIES  
MATERIAL  
SPECIFICATION  
AMS-QQ-A-200  
ASTMB221, 209  
COMPONENT  
Aluminum  
Machined components: such as backshell bodies, fabricated elbows, protective covers,  
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,  
EMI ground rings, grommet followers, etc.  
Aluminum  
QQ-A-591  
ASTMB85, 26  
Die cast components: such as angular backshells, strain relief backshells, strain relief  
bodies, strain relief saddles, special EMI ground rings, etc.  
Backshells or strain reliefs: available in optional corrosion resisting steel; and  
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.  
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.  
Anti-friction and thrust washers  
Corrosion Resisting Steel ASTMA582 (300 Series)  
AMS-QQ-S-763  
Silicone  
Teflon  
Corrosion Resistant  
Material  
ZZ-R-765, MIL-R-25988  
TFE  
N/A  
Anti-rotation device  
BODY STRAP  
NOTES  
On all length callouts, tolerance is ± .060 unless otherwise  
specified.  
Glenair offers an optional stainless steel body strap for  
attaching protective covers as illustrated. To specify body  
strap, add suffix letter C to the end of the part number. For  
example 360AS001M1610M6C.  
Unless otherwise specified, the following other dimensional  
tolerances will apply:  
.xx = ± .03 (0.8)  
.xxx = ± .015 (0.4)  
Lengths = ± .060 (1.52)  
Angles = ± 5°  
Metric dimensions (mm) are indicated in parentheses  
NOTE: For your convenience these tables have  
been reproduced inside the back cover fold-out.  
2-56 Screw and Nut  
© 2005 Glenair, Inc.  
CAGE Code 06324  
Printed in U.S.A.  
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912  
www.glenair.com  
E-Mail: sales@glenair.com  
14  
Glenair Backshell and Accessory Material and Finish Options  
Backshell and accessory base materials, plating options, specifications and codes  
Hrs. Salt  
Spray  
Electrical  
Conductivity  
Operating Temp.  
Range  
RoHS  
Code  
Material  
Finish  
Finish Specification  
Notes  
A
AB  
AL  
B
C
E
Aluminum  
Marine Bronze  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Aluminum  
Stainless Steel  
Aluminum  
Titanium  
Cadmium, No Chromate  
Unplated  
AlumiPlate, Clear Chromate  
Cadmium, Olive Drab  
Anodize, Black  
Chem Film  
Anodize, Hardcoat  
Cadmium, Gold  
Cadmium, Gold  
Cadmium, Clear  
Electroless Nickel  
Nickel-PTFE  
Cadmium, Olive Drab  
Zinc-Cobalt, Olive Drab  
Cadmium, Olive Drab  
Electrodeposited Nickel  
Cadmium, No Chromate  
Electrodeposited Nickel  
Cadmium, Black  
Zinc-Cobalt, Black  
Zinc-Cobalt, Black  
Cadmium, Black  
AlumiPlate  
Unplated Black  
Electroless Nickel  
Nickel-PTFE  
Unplated Light Brown  
Cadmium, Olive Drab  
Zinc-Nickel, Black  
Passivate  
SAE-AMS-QQ-P-416 Type I Class 3  
48  
1000  
1000  
96  
336  
168  
Conductive  
Conductive  
Conductive  
Conductive  
Non-Conductive  
Conductive  
Non-Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Non-Conductive  
Conductive  
Conductive  
Non-Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
Conductive  
-65 to +175°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +200°C  
-65 to +175°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +200°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +200°C  
-65 to +200°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
-65 to +175°C  
Not recommended for new projects. LF is preferred.  
Marine and geophysical applications.  
Approved for MIL-DTL-38999L and MIL-DTL-83513G.  
Not recommended for new projects. NF is preferred.  
Glenair’s standard black anodize finish.  
Glenair’s standard chem film finish.  
Glenair’s preferred hardcoat finish.  
Not recommended for new projects. JF is preferred.  
Glenair’s preferred gold cadmium finish.  
Glenair’s preferred clear cadmium finish.  
Glenair’s standard electroless nickel finish.  
Approved for MIL-DTL-38999L and MIL-DTL-83513G.  
Not recommended for new projects. NF is preferred.  
Glenair’s standard olive drab zinc-cobalt finish.  
Glenair’s standard olive drab cadmium finish.  
Use ZM for electroless nickel alternative.  
Not recommended for new projects. LF is preferred.  
Glenair’s preferred finish for titanium connectors.  
Not recommended for new projects. UF is preferred.  
Glenair’s standard black zinc-cobalt finish.  
RoHS version of UC.  
Glenair’s preferred black cadmium finish.  
Approved for MIL-DTL-38999L.  
Glenair’s standard unplated composite.  
Glenair’s standard electroless nickel finish over composite.  
Approved for MIL-DTL-38999L.  
Not recommended for new projects. Use XB.  
Glenair’s standard olive drab cadmium finish over composite.  
Glenair’s standard black zinc-nickel finish over composite.  
Glenair’s standard passivated stainless steel.  
Glenair’s standard gold plating for space programs.  
Glenair’s standard zinc-cobalt over stainless steel.  
RoHS version of ZC.  
Used on hermetic connectors. Use ZM for other applications.  
Glenair’s preferred nickel-plated stainless steel.  
Glenair’s new 1000 Hour Grey over stainless steel.  
Glenair’s standard olive drab zinc-nickel finish.  
Glenair’s standard black zinc-nickel finish.  
Glenair’s RoHs compliant black zinc-nickel.  
Glenair’s standard black cadmium over stainless steel.  
Glenair’s standard olive drab cadmium over stainless steel.  
MIL-DTL-83488, Class 2, Type II over electroless nickel  
SAE-AMS-QQ-P-416 Type II Class 3  
AMS-A-8625 Type II Class 2  
MIL-DTL-5541 Type 1 Class 3  
AMS-A-8625 Type III, Class 1, .001" thick  
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel  
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel  
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel  
AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV  
GMF-002 Type II Class 1  
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel  
ASTM B 840 Grade 6 Type D over electroless nickel  
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel  
SAE-AMS-QQ-N-290 Class 1 Grade F  
SAE-AMS-QQ-P-416 Type I Class 3  
SAE-AMS-QQ-N-290 Class 1 Grade F  
SAE-AMS-QQ-P-416 Type I Class 3  
ASTM B 840 Grade 6 Type D over electroless nickel  
ASTM B 840 Grade 6 Type D over electroless nickel  
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel  
MIL-DTL-86448, Class 2, Type II over electroless nickel  
G
J
336  
500  
JF  
LF  
M
MT  
N
NC  
NF  
P
1000  
1000  
48  
1000  
500  
350  
1000  
500  
48  
96  
48  
350  
T
TP2  
U
Aluminum  
Aluminum  
UC  
UCR Aluminum  
350  
UF  
XAL  
XB  
Aluminum  
Composite  
Composite  
Composite  
1000  
2000  
2000  
2000  
2000  
2000  
2000  
2000  
1000  
48  
XM  
AMS-C-26074  
GMS-002 Class 2 Type II  
XMT Composite  
XO  
XW  
XZN Composite  
Z1  
Z2  
ZC  
ZCR  
ZL  
Composite  
Composite  
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel  
ASTM B841 Grade 5 over electroless nickel  
SAE-AMS-SAE-AMS-QQ-P-35 Type VI  
MIL-DTL-45204 Class 1 over electroless nickel  
ASTM-B840, Grade 6  
ASTM-B840, Grade 6  
SAE-AMS-QQ-N-290 Class 1 Grade F  
AMS-C-26074 Class 1 Grade A  
Stainless Steel  
Aluminum  
Stainless Steel  
Stainless Steel  
Stainless Steel  
Stainless Steel  
Gold  
Zinc-Cobalt, Black  
Zinc-Cobalt, Black  
Electrodeposited Nickel  
Electroless Nickel  
Nickel-PTFE  
Zinc-Nickel, Olive Drab  
Zinc-Nickel, Black  
Zinc-Nickel, Black  
Cadmium, Black  
Cadmium, Olive Drab  
1000  
ZM  
ZMT Stainless Steel  
ZN Aluminum  
ZNU Aluminum  
ZR  
ZU  
ZW  
GMF-002 Type II Class 3  
1000  
1000  
1000  
500  
1000  
2000  
ASTM B841 Grade 5 over electroless nickel  
ASTM B841 Grade 5 over electroless nickel  
ASTM B841 Grade 5 over electroless nickel  
SAE-AMS-QQ-P-416 Type II Class 3  
Aluminum  
Stainless Steel  
Stainless Steel  
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明