790-026PK-9P9MP [GLENAIR]
D Microminiature Connector, 9 Contact(s), Male, Crimp Terminal, Receptacle,;
| 型号： | 790-026PK-9P9MP |
| 厂家： | 
Glenair |
| 描述： | D Microminiature Connector, 9 Contact(s), Male, Crimp Terminal, Receptacle, 连接器 |
| 文件： | 总5页 (文件大小：377K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
How To Order
790-026P Panel Mount Receptacles
PIN CONTACTS WITH CRIMP TERMINATION
790-026P connectors are designed for rear-panel mounting and are
supplied with conductive panel gaskets. These connectors feature
machined aluminum shells, fluorosilicone face seals and wire grommets
for environmental protection. Contacts are rear-release snap-in crimp
type. Connectors are supplied with crimp contacts packaged separately.
Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts
accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG
wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI
protection.
HOW TO ORDER
Sample Part Number
790-026P
L-6P6
MT
G
Shell Size -
Part Number
Insert Arrangement
Shell Finish
Hardware Option
See Table 1 for
Available Insert
Arrangements
790-026P
Rear Panel Mounted
Receptacle with Pin
Contacts
M
Electroless Nickel
general purpose applications
E
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
P
N
Female Jackpost
No Hardware
(non-reflective grey)
Example:
ZNU
36P2 is supplied with 2
Zinc-Nickel with Black
Chromate
power pins.
G
S
tactical applications
(non-reflective black)
36W2 is supplied less
Guide Pin
Female Guide Socket
the power pins.
See Section B for
coaxial contacts
purchased separately.
Additional shell finishes are
listed on page C-9.
SPECIFICATIONS
MATERIALS AND FINISHES
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Shell
Aluminum alloy
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
Copper alloy, 50 microinches gold
plated
Contacts
Insulation Resistance
Operating Temperature
Shock
5000 megohms minimum
-65° C. to +150° C.
300 g.
Insulators
Liquid crystal polymer (LCP)
Beryllium copper alloy
Retention Clips
Interfacial Seal, Grommet Flourosilicone rubber
Vibration
37 g.
Hardware
300 series stainless steel
Fluorosilicone, conductive
Panel Gasket
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
E-1
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
How To Order
CROSS-SECTIONAL VIEW OF 790-026P
Table I Contact Arrangements
Contact
Quantity
.195 (4.95)
.025 (0.64)
RETAINING CLIP
Layout #23#16#12
Face View
FRONT INSULATOR
EMI GASKET
REAR INSULATOR
GROMMET
5
A-5
2
B-2P2
B-9
INTERFACIAL SEAL
POTTING
9
PIN CONTACT
WIRE (REF.)
13
15
C-13
D-15
3
2
2
D-3P3
D-7P2
E-11P2
E-19
GUIDE PIN
SHELL
5
9
.007
19
4
(0.18)
3
2
E-7P3
F-15P2
F-23
13
23
TABLE 2 HARDWARE OPTION
5
F-5P5
33
6
G-33
4
2
5
H-10P4
H-29P7
H-36P2
H-54P2
H-5P5
H-66
22
34
52
7
2
E
N
P
No Mating Hardware
Jackposts
Connector is supplied with threaded holes.
Shell sizes H and L have #6-32 threads, other
sizes have #4-40 threads. Thread depth is
.150" (3.8).
Connector is supplied with non-removable
stainless steel jackposts. Shell sizes H and L
have #4-40 UNC thread, other sizes have #2-
56 thread. Stainless steel.
66
13
23
33
4
2
J-17P4
J-25P2
J-33
7
4
2
J-7P7
K-27P4
K-35P2
K-43
23
33
43
G
S
Guide Sockets
Guide Pins
Connector is supplied with stainless steel
non-removable bushings. Mates with type "G"
guide pins on corresponding plug connector.
Connector is supplied with stainless steel
non-removable guide pins. Mates with type
"S" guide sockets on corresponding plug
connector.
9
K-9P9
L-6P6
6
78
L-78
102
M-102
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
E-2
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size A, B, C, D, E, F, J, K Dimensions
BLIND MATE
A MAX
B BASIC
.308 (7.82)
MAX
C BASIC
D MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR
REFERENCE. SEE
ORDERING INFORMATION
FOR OTHER OPTIONS.
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM CENTERLINE
.170 (4.32)
.335 (8.51)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
E MAX
E
C BASIC
.215 (5.46)
MAX
.485 (12.32)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
790-026P Dimensions for Size A-F, J and K
A Max.
B Basic
C Basic
D Max.
E Max.
Shell
Size
In. mm.
In. mm.
In. mm.
In. mm.
In. mm.
1.211 30.76
.925 23.50
.565 14.35
.715 18.16
.865 21.97
.965 24.51
.401 10.19
.551 14.00
.760 19.30
.910 21.11
A
B
C
D
E
F
1.361 34.57 1.075 27.31
1.511 38.38 1.225 31.12
1.611 40.92 1.325 33.66
.701 17.81 1.060 26.92
.801 20.35 1.160 29.46
.951 24.16 1.310 33.27
1.761 44.73 1.475 37.47 1.115 28.32
1.911 48.54 1.625 41.28 1.265 32.13 1.101 27.96 1.460 37.08
2.261 57.43 1.975 50.17 1.615 41.02 1.460 37.08 1.810 45.97
2.661 67.59 2.375 60.33 2.015 51.18 1.860 47.24 2.210 56.13
J
K
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
E-3
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size G Dimensions
1.861 (47.27) MAX
BLIND MATE
1.575 (40.01) BASIC
1.215 (30.86) BASIC
.387 (9.83)
MAX
1.079 (27.41) MAX
2-56 UNC-2B X
.150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
.170 (4.32)
.335 (8.51)
MAX
SHELL SIZES A, B, C, D, E, F, G, J, K
+/- .030 (0.76) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
1.410 (35.81)
MAX
1.215 (30.86) BASIC
.215 (5.46)
MAX
.575 (14.61)
MAX
2-56 UNC-2B X .150 (3.81) MIN
2 PLACES
E
790-026P Shell Size H and L Dimensions
F MAX
G BASIC
BLIND MATE
H BASIC
J MAX
.410 (10.41)
MAX
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
JACKPOST SHOWN FOR REFERENCE.
SEE ORDERING INFORMATION FOR
OTHER OPTIONS.
.170 (4.32)
SHELL SIZES H, L
+/- .040 (1.02) ALLOWABLE
MISALIGNMENT
.
385 (9.78)
MAX
.640 (16.26)
MAX
.093 ± .005
(2.36 ± 0.13)
FROM CENTERLINE
K MAX
790-026P SIZE H & L DIMENSIONS
H BASIC
.265 (6.73)
MAX
F Max.
In. mm.
G Basic
In. mm.
H Basic
In. mm.
J Max.
In. mm.
K Max.
In. mm.
Shell
Size
.600 (15.24)
MAX
2.500 63.50 2.236 56.79 1.800 45.72 1.450 36.83 2.045 51.94
2.736 69.49 2.472 62.79 2.036 51.71 1.686 42.82 2.281 57.94
H
L
4-40 UNC-2B X .150 (3.81) MIN
2 PLACES
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
E-4
790-026P
Crimp Terminated Panel Mount Receptacles,
Pin Contacts
Dimensions
790-026P Shell Size M Dimensions
3.085 (78.36) MAX
2.770 70.36) BASIC
2.200 (55.88) BASIC
.150
(3.81)
MIN 2X
1.745 (44.32) MAX
.660
(16.76)
MAX
.470
(11.94)
MAX
2X 6-32 UNC-2B
X .150 (3.81) MIN
GUIDE PIN SHOWN FOR REFERENCE
SEE TABLE I (DWG. SHEET #1)
.170 (4.32)
.093±.005
(2.36±0.13)
.385 (9.78)
MAX.
.640 (16.26)
MAX.
2.485 MAX.
E
.320 (8.13)
MAX.
2.200 (55.88) BASIC
BLIND MATE
4-40 UNC-2B
X (.150) MIN DEEP.
2 PLACES
SHELL SIZE M
+/- .050 (0.76) ALLOWABLE
MISALIGNMENT FROM
CENTERLINE
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
E-5
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明